[alsa-devel] WM8904 SAMA5D channel swap
I'm seeing left/right channel swapping problems on a board with a WM8904 codec and a SAMA5D35 CPU.
configuration is CBM and CFM and original data format is I2S. Our board has the same connections and parts as the EK from Atmel.
I tried to apply commit bc567a93502275755492141524935269dcf0ea1b ASoC: sam9x5_wm8731: change to work in DSP A mode by Bo Shen. (It needs another fix because TCMR CKS is set to PIN, but needs to be set to CLK, like it is for I2S, otherwise playback would stall)
Even using DSP-A mode the sound sometimes is swapped and this is quite a problem.
Anyone found a fix?
Hi Matteo,
On 07/18/2014 09:31 PM, Matteo Fortini wrote:
I'm seeing left/right channel swapping problems on a board with a WM8904 codec and a SAMA5D35 CPU.
configuration is CBM and CFM and original data format is I2S. Our board has the same connections and parts as the EK from Atmel.
I tried to apply commit bc567a93502275755492141524935269dcf0ea1b ASoC: sam9x5_wm8731: change to work in DSP A mode by Bo Shen. (It needs another fix because TCMR CKS is set to PIN, but needs to be set to CLK, like it is for I2S, otherwise playback would stall)
Even using DSP-A mode the sound sometimes is swapped and this is quite a problem.
Oops, DSP-A mode still has this issue? I will try to reproduce this issue. If any updates, I will let you know.
Anyone found a fix?
Best Regards, Bo Shen
participants (2)
-
Bo Shen -
Matteo Fortini