At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data channels per data block in CIP.

Both iO14 and iO26 have the same contents in their configuration ROM. For this reason, ALSA Dice driver attempts to distinguish them according to the value of TX0_AUDIO register at probe callback. Although the way is valid at lower and middle sampling rate, it's lastly invalid at higher sampling rate because because the two models returns the same value for read transaction to the register.

In the most cases, users just plug-in the device and ALSA dice driver detects it. In the case, the device runs at lower sampling rate and the driver detects expectedly. For this reason, this commit leaves the way to detect as is.

Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp --- sound/firewire/dice/dice-alesis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/firewire/dice/dice-alesis.c b/sound/firewire/dice/dice-alesis.c index 218292bdace6..f5b325263b67 100644 --- a/sound/firewire/dice/dice-alesis.c +++ b/sound/firewire/dice/dice-alesis.c @@ -15,7 +15,7 @@ alesis_io14_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = {

static const unsigned int alesis_io26_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = { - {10, 10, 8}, /* Tx0 = Analog + S/PDIF. */ + {10, 10, 4}, /* Tx0 = Analog + S/PDIF. */ {16, 8, 0}, /* Tx1 = ADAT1 + ADAT2. */ };