Added mixer quirks to allow controlling the internal DSP of the RME Babyface Pro and its successor Babyface Pro FS.

Signed-off-by: Thomas Ebeling penguins@bollie.de --- sound/usb/mixer_quirks.c | 418 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 418 insertions(+)

diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 02b036b2aefb..f0302ad7f5a0 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -2181,6 +2181,421 @@ static int snd_rme_controls_create(struct usb_mixer_interface *mixer) return 0; }

+/* + * RME Babyface Pro (FS) + * + * These devices exposes a couple of DSP functions via request to EP0. + * Switches are available via control registers, while routing is controlled + * by controlling the volume on each possible crossing point. + * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 46341) with + * 0dB being at dec. 32768. + */ +enum { + SND_BBFPRO_CTL_REG1 = 0, + SND_BBFPRO_CTL_REG2 +}; + +#define SND_BBFPRO_CTL_REG_MASK 1 +#define SND_BBFPRO_CTL_IDX_MASK 0xff +#define SND_BBFPRO_CTL_IDX_SHIFT 1 +#define SND_BBFPRO_CTL_VAL_MASK 1 +#define SND_BBFPRO_CTL_VAL_SHIFT 9 +#define SND_BBFPRO_CTL_REG1_CLK_MASTER 0 +#define SND_BBFPRO_CTL_REG1_CLK_OPTICAL 1 +#define SND_BBFPRO_CTL_REG1_SPDIF_PRO 7 +#define SND_BBFPRO_CTL_REG1_SPDIF_EMPH 8 +#define SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL 10 +#define SND_BBFPRO_CTL_REG2_48V_AN1 0 +#define SND_BBFPRO_CTL_REG2_48V_AN2 1 +#define SND_BBFPRO_CTL_REG2_SENS_IN3 2 +#define SND_BBFPRO_CTL_REG2_SENS_IN4 3 +#define SND_BBFPRO_CTL_REG2_PAD_AN1 4 +#define SND_BBFPRO_CTL_REG2_PAD_AN2 5 + +#define SND_BBFPRO_MIXER_IDX_MASK 0x1ff +#define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff +#define SND_BBFPRO_MIXER_VAL_SHIFT 9 +#define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf +#define SND_BBFPRO_MIXER_VAL_MAX 46341 // +6dB + +#define SND_BBFPRO_USBREQ_CTL_REG1 0x10 +#define SND_BBFPRO_USBREQ_CTL_REG2 0x17 +#define SND_BBFPRO_USBREQ_MIXER 0x12 + +static int snd_bbfpro_ctl_update(struct usb_mixer_interface *mixer, u8 reg, + u8 index, u8 value) +{ + int err; + u16 usb_req, usb_idx, usb_val; + struct snd_usb_audio *chip = mixer->chip; + + err = snd_usb_lock_shutdown(chip); + if (err < 0) + return err; + + if (reg == SND_BBFPRO_CTL_REG1) { + usb_req = SND_BBFPRO_USBREQ_CTL_REG1; + if (index == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) { + usb_idx = 3; + usb_val = value ? 3 : 0; + } else { + usb_idx = 1 << index; + usb_val = value ? usb_idx : 0; + } + } else { + usb_req = SND_BBFPRO_USBREQ_CTL_REG2; + usb_idx = 1 << index; + usb_val = value ? usb_idx : 0; + } + + err = snd_usb_ctl_msg(chip->dev, + usb_sndctrlpipe(chip->dev, 0), usb_req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + usb_val, usb_idx, 0, 0); + + snd_usb_unlock_shutdown(chip); + return err; +} + +static int snd_bbfpro_ctl_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + u8 reg, idx, val; + int pv; + + pv = kcontrol->private_value; + reg = pv & SND_BBFPRO_CTL_REG_MASK; + idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK; + val = kcontrol->private_value >> SND_BBFPRO_CTL_VAL_SHIFT; + + if ((reg == SND_BBFPRO_CTL_REG1 && + idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) || + (reg == SND_BBFPRO_CTL_REG2 && + (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 || + idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) { + ucontrol->value.enumerated.item[0] = val; + } else { + ucontrol->value.integer.value[0] = val; + } + return 0; +} + +static int snd_bbfpro_ctl_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + u8 reg, idx; + int pv; + + pv = kcontrol->private_value; + reg = pv & SND_BBFPRO_CTL_REG_MASK; + idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK; + + if (reg == SND_BBFPRO_CTL_REG1 && + idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) { + static const char * const texts[2] = { + "AutoSync", + "Internal" + }; + return snd_ctl_enum_info(uinfo, 1, 2, texts); + } else if (reg == SND_BBFPRO_CTL_REG2 && + (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 || + idx == SND_BBFPRO_CTL_REG2_SENS_IN4)) { + static const char * const texts[2] = { + "-10dBV", + "+4dBu" + }; + return snd_ctl_enum_info(uinfo, 1, 2, texts); + } + + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + return 0; +} + +static int snd_bbfpro_ctl_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int err; + u8 reg, idx; + int old_value, pv, val; + + struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol); + struct usb_mixer_interface *mixer = list->mixer; + + pv = kcontrol->private_value; + reg = pv & SND_BBFPRO_CTL_REG_MASK; + idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK; + old_value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK; + + if ((reg == SND_BBFPRO_CTL_REG1 && + idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) || + (reg == SND_BBFPRO_CTL_REG2 && + (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 || + idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) { + val = ucontrol->value.enumerated.item[0]; + } else { + val = ucontrol->value.integer.value[0]; + } + + if (val > 1) + return -EINVAL; + + if (val == old_value) + return 0; + + kcontrol->private_value = reg + | ((idx & SND_BBFPRO_CTL_IDX_MASK) << SND_BBFPRO_CTL_IDX_SHIFT) + | ((val & SND_BBFPRO_CTL_VAL_MASK) << SND_BBFPRO_CTL_VAL_SHIFT); + + err = snd_bbfpro_ctl_update(mixer, reg, idx, val); + return err < 0 ? err : 1; +} + +static int snd_bbfpro_ctl_resume(struct usb_mixer_elem_list *list) +{ + u8 reg, idx; + int value, pv; + + pv = list->kctl->private_value; + reg = pv & SND_BBFPRO_CTL_REG_MASK; + idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK; + value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK; + + return snd_bbfpro_ctl_update(list->mixer, reg, idx, value); +} + +static int snd_bbfpro_vol_update(struct usb_mixer_interface *mixer, u16 index, + u32 value) +{ + struct snd_usb_audio *chip = mixer->chip; + int err; + u16 idx; + u16 usb_idx, usb_val; + u32 v; + + err = snd_usb_lock_shutdown(chip); + if (err < 0) + return err; + + idx = index & SND_BBFPRO_MIXER_IDX_MASK; + // 18 bit linear volume, split so 2 bits end up in index. + v = value & SND_BBFPRO_MIXER_VAL_MASK; + usb_idx = idx | (v & 0x3) << 14; + usb_val = (v >> 2) & 0xffff; + + err = snd_usb_ctl_msg(chip->dev, + usb_sndctrlpipe(chip->dev, 0), + SND_BBFPRO_USBREQ_MIXER, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, + usb_val, usb_idx, 0, 0); + + snd_usb_unlock_shutdown(chip); + return err; +} + +static int snd_bbfpro_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = + kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT; + return 0; +} + +static int snd_bbfpro_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = SND_BBFPRO_MIXER_VAL_MIN; + uinfo->value.integer.max = SND_BBFPRO_MIXER_VAL_MAX; + return 0; +} + +static int snd_bbfpro_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int err; + u16 idx; + u32 new_val, old_value, uvalue; + struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol); + struct usb_mixer_interface *mixer = list->mixer; + + uvalue = ucontrol->value.integer.value[0]; + idx = kcontrol->private_value & SND_BBFPRO_MIXER_IDX_MASK; + old_value = kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT; + + if (uvalue > SND_BBFPRO_MIXER_VAL_MAX) + return -EINVAL; + + if (uvalue == old_value) + return 0; + + new_val = uvalue & SND_BBFPRO_MIXER_VAL_MASK; + + kcontrol->private_value = idx + | (new_val << SND_BBFPRO_MIXER_VAL_SHIFT); + + err = snd_bbfpro_vol_update(mixer, idx, new_val); + return err < 0 ? err : 1; +} + +static int snd_bbfpro_vol_resume(struct usb_mixer_elem_list *list) +{ + int pv = list->kctl->private_value; + u16 idx = pv & SND_BBFPRO_MIXER_IDX_MASK; + u32 val = (pv >> SND_BBFPRO_MIXER_VAL_SHIFT) + & SND_BBFPRO_MIXER_VAL_MASK; + return snd_bbfpro_vol_update(list->mixer, idx, val); +} + +// Predfine elements +static const struct snd_kcontrol_new snd_bbfpro_ctl_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .index = 0, + .info = snd_bbfpro_ctl_info, + .get = snd_bbfpro_ctl_get, + .put = snd_bbfpro_ctl_put +}; + +static const struct snd_kcontrol_new snd_bbfpro_vol_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .index = 0, + .info = snd_bbfpro_vol_info, + .get = snd_bbfpro_vol_get, + .put = snd_bbfpro_vol_put +}; + +static int snd_bbfpro_ctl_add(struct usb_mixer_interface *mixer, u8 reg, + u8 index, char *name) +{ + struct snd_kcontrol_new knew = snd_bbfpro_ctl_control; + + knew.name = name; + knew.private_value = (reg & SND_BBFPRO_CTL_REG_MASK) + | ((index & SND_BBFPRO_CTL_IDX_MASK) + << SND_BBFPRO_CTL_IDX_SHIFT); + + return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_ctl_resume, + &knew, NULL); +} + +static int snd_bbfpro_vol_add(struct usb_mixer_interface *mixer, u16 index, + char *name) +{ + struct snd_kcontrol_new knew = snd_bbfpro_vol_control; + + knew.name = name; + knew.private_value = index & SND_BBFPRO_MIXER_IDX_MASK; + + return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_vol_resume, + &knew, NULL); +} + +static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer) +{ + int err, i, o; + char name[48]; + + static const char * const input[] = { + "AN1", "AN2", "IN3", "IN4", "AS1", "AS2", "ADAT3", + "ADAT4", "ADAT5", "ADAT6", "ADAT7", "ADAT8"}; + + static const char * const output[] = { + "AN1", "AN2", "PH3", "PH4", "AS1", "AS2", "ADAT3", "ADAT4", + "ADAT5", "ADAT6", "ADAT7", "ADAT8"}; + + for (o = 0 ; o < 12 ; ++o) { + for (i = 0 ; i < 12 ; ++i) { + // Line routing + snprintf(name, sizeof(name), + "%s-%s-%s Playback Volume", + (i < 2 ? "Mic" : "Line"), + input[i], output[o]); + err = snd_bbfpro_vol_add(mixer, (26 * o + i), name); + if (err < 0) + return err; + + // PCM routing... yes, it is output remapping + snprintf(name, sizeof(name), + "PCM-%s-%s Playback Volume", + output[i], output[o]); + err = snd_bbfpro_vol_add(mixer, (26 * o + 12 + i), + name); + if (err < 0) + return err; + } + } + + // Control Reg 1 + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1, + SND_BBFPRO_CTL_REG1_CLK_OPTICAL, + "Sample Clock Source"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1, + SND_BBFPRO_CTL_REG1_SPDIF_PRO, + "IEC958 Pro Mask"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1, + SND_BBFPRO_CTL_REG1_SPDIF_EMPH, + "IEC958 Emphasis"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1, + SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL, + "IEC958 Switch"); + if (err < 0) + return err; + + // Control Reg 2 + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_48V_AN1, + "Mic-AN1 48V"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_48V_AN2, + "Mic-AN2 48V"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_SENS_IN3, + "Line-IN3 Sens."); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_SENS_IN4, + "Line-IN4 Sens."); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_PAD_AN1, + "Mic-AN1 PAD"); + if (err < 0) + return err; + + err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2, + SND_BBFPRO_CTL_REG2_PAD_AN2, + "Mic-AN2 PAD"); + if (err < 0) + return err; + + return 0; +} + int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { int err = 0; @@ -2282,6 +2697,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */ err = snd_sc1810_init_mixer(mixer); break; + case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */ + err = snd_bbfpro_controls_create(mixer); + break; }

return err;