[PATCH] ASoC: dt-bindings: Correct interrupt flags in examples
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted some logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski krzk@kernel.org --- Documentation/devicetree/bindings/sound/max98090.txt | 2 +- Documentation/devicetree/bindings/sound/rt5640.txt | 2 +- Documentation/devicetree/bindings/sound/rt5659.txt | 2 +- Documentation/devicetree/bindings/sound/rt5665.txt | 2 +- Documentation/devicetree/bindings/sound/rt5668.txt | 2 +- Documentation/devicetree/bindings/sound/rt5677.txt | 2 +- Documentation/devicetree/bindings/sound/rt5682.txt | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt index 7e1bbd5c27fd..39d640294c62 100644 --- a/Documentation/devicetree/bindings/sound/max98090.txt +++ b/Documentation/devicetree/bindings/sound/max98090.txt @@ -55,5 +55,5 @@ audio-codec@10 { compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt index e40e4893eed8..ff1228713f7e 100644 --- a/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -88,7 +88,7 @@ rt5640 { compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt index 1766e0543fc5..56788f50b6cf 100644 --- a/Documentation/devicetree/bindings/sound/rt5659.txt +++ b/Documentation/devicetree/bindings/sound/rt5659.txt @@ -72,7 +72,7 @@ rt5659 { compatible = "realtek,rt5659"; reg = <0x1b>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt index 8df170506986..f6ca96b4ce98 100644 --- a/Documentation/devicetree/bindings/sound/rt5665.txt +++ b/Documentation/devicetree/bindings/sound/rt5665.txt @@ -62,7 +62,7 @@ rt5659 { compatible = "realtek,rt5665"; reg = <0x1b>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5668.txt b/Documentation/devicetree/bindings/sound/rt5668.txt index c88b96e7764b..a2b7e9a2f2f3 100644 --- a/Documentation/devicetree/bindings/sound/rt5668.txt +++ b/Documentation/devicetree/bindings/sound/rt5668.txt @@ -41,7 +41,7 @@ rt5668 { compatible = "realtek,rt5668b"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; realtek,dmic1-data-pin = <1>; diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt index 1b3c13d206ff..da2430099181 100644 --- a/Documentation/devicetree/bindings/sound/rt5677.txt +++ b/Documentation/devicetree/bindings/sound/rt5677.txt @@ -64,7 +64,7 @@ rt5677 { compatible = "realtek,rt5677"; reg = <0x2c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt index ade1ece8b45f..707fa98d1310 100644 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -58,7 +58,7 @@ rt5682 { compatible = "realtek,rt5682i"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; realtek,dmic1-data-pin = <1>;
On Tue, 08 Sep 2020 16:59:54 +0200, Krzysztof Kozlowski wrote:
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning:
- GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
- GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted some logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski krzk@kernel.org
Documentation/devicetree/bindings/sound/max98090.txt | 2 +- Documentation/devicetree/bindings/sound/rt5640.txt | 2 +- Documentation/devicetree/bindings/sound/rt5659.txt | 2 +- Documentation/devicetree/bindings/sound/rt5665.txt | 2 +- Documentation/devicetree/bindings/sound/rt5668.txt | 2 +- Documentation/devicetree/bindings/sound/rt5677.txt | 2 +- Documentation/devicetree/bindings/sound/rt5682.txt | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-)
Acked-by: Rob Herring robh@kernel.org
On Tue, 8 Sep 2020 16:59:54 +0200, Krzysztof Kozlowski wrote:
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning:
- GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
- GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted some logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: dt-bindings: Correct interrupt flags in examples commit: abe42b09118914f01246f880dd9029150fdc727c
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Krzysztof Kozlowski -
Mark Brown -
Rob Herring