From: Pete Leigh pete.leigh@gmail.com

Without this quirk the VG-99 will work in standard mode (set under USB on System menu page 2) giving 16 bits at 44.1 Khz audio in/out but no midi, and is not recognised when set to advanced mode.

After applying this, I can also use the VG-99 in advanced mode: 24 24 bits audio in/out at 44.1 Khz, and midi in/out. Sysex is so far untested.

In standard mode, the device appears with ID 0x00b3, so the behaviour isn't affected by this quirk.

Thanks to Clemens Ladisch for simplifying and correcting my initial attempt!

Signed-off-by: Pete Leigh pete.leigh@gmail.com

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 88d8ceb..ffeabf8 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -1457,6 +1457,40 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, { + /* Advanced mode of the Roland VG-99, with MIDI and 24-bit PCM at 44.1 + * kHz. In standard mode, the device has ID 0582:00b3, and offers + * 16-bit PCM at 44.1 kHz with no MIDI. + */ + USB_DEVICE(0x0582, 0x00b2), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Roland", + .product_name = "VG-99", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0003, + .in_cables = 0x0003 + } + }, + { + .ifnum = -1 + } + } + } +}, +{ /* Roland SonicCell */ USB_DEVICE(0x0582, 0x00c2), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {