Convert the Qualcomm WCD9335 audio codec binding to DT schema.

Changes against original binding: 1. Drop "mclk2" from clocks as neither Linux driver nor DTS uses it. 2. Do not require vdd-micbias-supply as several DTS do not provide it.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

---

Few DTS boards have incomplete WCD9335 node causing dtbs_check warnings. These are fixed here: https://lore.kernel.org/linux-arm-msm/42f7d53b-a922-760a-4be2-7498ea0d560a@l... --- .../bindings/sound/qcom,wcd9335.txt | 123 -------------- .../bindings/sound/qcom,wcd9335.yaml | 156 ++++++++++++++++++ 2 files changed, 156 insertions(+), 123 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd9335.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd9335.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt deleted file mode 100644 index 1f75feec3dec..000000000000 --- a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt +++ /dev/null @@ -1,123 +0,0 @@ -QCOM WCD9335 Codec - -Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports -Qualcomm Technologies, Inc. (QTI) multimedia solutions, including -the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built -Soundwire controller, interrupt mux. It supports both I2S/I2C and -SLIMbus audio interfaces. - -Required properties with SLIMbus Interface: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: For SLIMbus interface it should be "slimMID,PID", - textual representation of Manufacturer ID, Product Code, - shall be in lower case hexadecimal with leading zeroes - suppressed. Refer to slimbus/bus.txt for details. - Should be: - "slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus. - -- reg - Usage: required - Value type: <u32 u32> - Definition: Should be ('Device index', 'Instance ID') - -- interrupts - Usage: required - Value type: <prop-encoded-array> - Definition: Interrupts via WCD INTR1 and INTR2 pins - -- interrupt-names: - Usage: required - Value type: <String array> - Definition: Interrupt names of WCD INTR1 and INTR2 - Should be: "intr1", "intr2" - -- reset-gpios: - Usage: required - Value type: <String Array> - Definition: Reset gpio line - -- slim-ifc-dev: - Usage: required - Value type: <phandle> - Definition: SLIM interface device - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: See clock-bindings.txt section "consumers". List of - three clock specifiers for mclk, mclk2 and slimbus clock. - -- clock-names: - Usage: required - Value type: <string> - Definition: Must contain "mclk", "mclk2" and "slimbus" strings. - -- vdd-buck-supply: - Usage: required - Value type: <phandle> - Definition: Should contain a reference to the 1.8V buck supply - -- vdd-buck-sido-supply: - Usage: required - Value type: <phandle> - Definition: Should contain a reference to the 1.8V SIDO buck supply - -- vdd-rx-supply: - Usage: required - Value type: <phandle> - Definition: Should contain a reference to the 1.8V rx supply - -- vdd-tx-supply: - Usage: required - Value type: <phandle> - Definition: Should contain a reference to the 1.8V tx supply - -- vdd-vbat-supply: - Usage: Optional - Value type: <phandle> - Definition: Should contain a reference to the vbat supply - -- vdd-micbias-supply: - Usage: required - Value type: <phandle> - Definition: Should contain a reference to the micbias supply - -- vdd-io-supply: - Usage: required - Value type: <phandle> - Definition: Should contain a reference to the 1.8V io supply - -- interrupt-controller: - Usage: required - Definition: Indicating that this is a interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <int> - Definition: should be 1 - -#sound-dai-cells - Usage: required - Value type: <u32> - Definition: Must be 1 - -audio-codec@1{ - compatible = "slim217,1a0"; - reg = <1 0>; - interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr2" - reset-gpios = <&msmgpio 64 GPIO_ACTIVE_LOW>; - slim-ifc-dev = <&wc9335_ifd>; - clock-names = "mclk", "native"; - clocks = <&rpmcc RPM_SMD_DIV_CLK1>, - <&rpmcc RPM_SMD_BB_CLK1>; - vdd-buck-supply = <&pm8994_s4>; - vdd-rx-supply = <&pm8994_s4>; - vdd-buck-sido-supply = <&pm8994_s4>; - vdd-tx-supply = <&pm8994_s4>; - vdd-io-supply = <&pm8994_s4>; - #sound-dai-cells = <1>; -} diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd9335.yaml new file mode 100644 index 000000000000..34f8fe4da9d4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wcd9335.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCD9335 Audio Codec + +maintainers: + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + +description: + Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC with in-built + Soundwire controller and interrupt mux. It supports both I2S/I2C and SLIMbus + audio interfaces. + +properties: + compatible: + const: slim217,1a0 + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: mclk + - const: slimbus + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: intr1 + - const: intr2 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + reset-gpios: + maxItems: 1 + + slim-ifc-dev: + description: SLIM IFC device interface + $ref: /schemas/types.yaml#/definitions/phandle + + '#sound-dai-cells': + const: 1 + + vdd-buck-supply: + description: 1.8V buck supply + + vdd-buck-sido-supply: + description: 1.8V SIDO buck supply + + vdd-io-supply: + description: 1.8V I/O supply + + vdd-micbias-supply: + description: micbias supply + + vdd-rx-supply: + description: 1.8V rx supply + + vdd-tx-supply: + description: 1.8V tx supply + + vdd-vbat-supply: + description: vbat supply + +required: + - compatible + - reg + +allOf: + - $ref: dai-common.yaml# + - if: + required: + - slim-ifc-dev + then: + required: + - clocks + - clock-names + - interrupts + - interrupt-names + - interrupt-controller + - '#interrupt-cells' + - reset-gpios + - slim-ifc-dev + - '#sound-dai-cells' + - vdd-buck-supply + - vdd-buck-sido-supply + - vdd-io-supply + - vdd-rx-supply + - vdd-tx-supply + else: + properties: + clocks: false + clock-names: false + interrupts: false + interrupt-names: false + interrupt-controller: false + '#interrupt-cells': false + reset-gpios: false + slim-ifc-dev: false + '#sound-dai-cells': false + vdd-buck-supply: false + vdd-buck-sido-supply: false + vdd-io-supply: false + vdd-micbias-supply: false + vdd-rx-supply: false + vdd-tx-supply: false + vdd-vbat-supply: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + tasha_ifd: codec@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, <&rpmcc RPM_SMD_BB_CLK1>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + };