The patch

ASoC: rsnd: move "renesas,rsrc-card" to "simple-scu-audio-card" on Document

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

From 0378bb966765e06fdb0e00d592a6fcfbb71afa3c Mon Sep 17 00:00:00 2001

From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Date: Wed, 26 Apr 2017 02:26:30 +0000 Subject: [PATCH] ASoC: rsnd: move "renesas,rsrc-card" to "simple-scu-audio-card" on Document

"renesas,rsrc-card" is exchanged to "simple-scu-card". Let's update Document

Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org --- .../devicetree/bindings/sound/renesas,rsnd.txt | 30 +++++++++++----------- 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 15a7316e4c91..3332910a9a11 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes ** Asynchronous mode ------------------

-You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example)

sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... /* * SRC Asynchronous mode setting @@ -97,12 +97,12 @@ example) * Inputed 48kHz data will be converted to * system specified Hz */ - convert-rate = <48000>; + simple-audio-card,convert-rate = <48000>; ... - cpu { + simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -141,23 +141,23 @@ For more detail information, see below ${LINUX}/sound/soc/sh/rcar/ctu.c - comment of header

-You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example)

sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... /* * CTU setting * All input data will be converted to 2ch * as output data */ - convert-channels = <2>; + simple-audio-card,convert-channels = <2>; ... - cpu { + simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -190,22 +190,22 @@ and these sounds will be merged by MIX. aplay -D plughw:0,0 xxxx.wav & aplay -D plughw:0,1 yyyy.wav

-You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. Ex) [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] | [MEM] -> [SRC2] -> [CTU03] -+

sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... - cpu@0 { + simple-audio-card,cpu@0 { sound-dai = <&rcar_sound 0>; }; - cpu@1 { + simple-audio-card,cpu@1 { sound-dai = <&rcar_sound 1>; }; - codec { + simple-audio-card,codec { ... }; };

Hi Morimoto-san,

On Wed, Apr 26, 2017 at 4:26 AM, Kuninori Morimoto kuninori.morimoto.gx@renesas.com wrote:

From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com

Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com

Thanks for doing this!

---

Documentation/devicetree/bindings/sound/renesas,rsnd.txt | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 3332910..13cb21d5 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -368,6 +368,10 @@ Required properties: see below for detail.

• #sound-dai-cells : it must be 0 if your system is using single DAI it must be 1 if your system is using multi DAI

+- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. +- clock-names : List of necessary clock names.

•                             "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
  

•                             "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
  

Are all clock mandatory? r8a7778.dtsi doesn't have "ssi-all" and the mix, ctu, and dvc clocks. r8a7793.dtsi doesn't have the mix and ctu clocks.

Thanks again!

Gr{oetje,eeting}s,

Geert

-- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds

The patch

ASoC: rsnd: add missing clocks/clock-names on Document

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

From 5b3889f80a79d9b73f73e19ba9a001c2d47ab47f Mon Sep 17 00:00:00 2001

From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Date: Wed, 26 Apr 2017 02:26:48 +0000 Subject: [PATCH] ASoC: rsnd: add missing clocks/clock-names on Document

Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org --- Documentation/devicetree/bindings/sound/renesas,rsnd.txt | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 3332910a9a11..13cb21d53b8b 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -368,6 +368,10 @@ Required properties: see below for detail. - #sound-dai-cells : it must be 0 if your system is using single DAI it must be 1 if your system is using multi DAI +- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. +- clock-names : List of necessary clock names. + "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X", + "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"

Optional properties: - #clock-cells : it must be 0 if your system has audio_clkout