[PATCH] ASoC: mediatek: mt6358: support DMIC one-wire mode
Supports DMIC one-wire mode. Adds a mixer control to enable and disable.
Signed-off-by: Jiaxin Yu jiaxin.yu@mediatek.com Reviewed-by: Tzung-Bi Shih tzungbi@google.com --- sound/soc/codecs/mt6358.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/mt6358.c b/sound/soc/codecs/mt6358.c index 1b830ea..ca7628d 100644 --- a/sound/soc/codecs/mt6358.c +++ b/sound/soc/codecs/mt6358.c @@ -95,6 +95,8 @@ struct mt6358_priv { struct regulator *avdd_reg;
int wov_enabled; + + int dmic_one_wire_mode; };
int mt6358_set_mtkaif_protocol(struct snd_soc_component *cmpnt, @@ -566,6 +568,28 @@ static int mt6358_put_wov(struct snd_kcontrol *kcontrol, return 0; }
+static int mt6358_dmic_one_wire_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol); + struct mt6358_priv *priv = snd_soc_component_get_drvdata(cmpnt); + + ucontrol->value.integer.value[0] = priv->dmic_one_wire_mode; + + return 0; +} + +static int mt6358_dmic_one_wire_mode_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol); + struct mt6358_priv *priv = snd_soc_component_get_drvdata(cmpnt); + + priv->dmic_one_wire_mode = ucontrol->value.integer.value[0]; + + return 0; +} + static const DECLARE_TLV_DB_SCALE(playback_tlv, -1000, 100, 0); static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 600, 0);
@@ -588,6 +612,10 @@ static int mt6358_put_wov(struct snd_kcontrol *kcontrol,
SOC_SINGLE_BOOL_EXT("Wake-on-Voice Phase2 Switch", 0, mt6358_get_wov, mt6358_put_wov), + + SOC_SINGLE_BOOL_EXT("Dmic One Wire Mode", 0, + mt6358_dmic_one_wire_mode_get, + mt6358_dmic_one_wire_mode_set), };
/* MUX */ @@ -1740,7 +1768,10 @@ static int mt6358_amic_enable(struct mt6358_priv *priv) mt6358_mtkaif_tx_enable(priv);
/* UL dmic setting off */ - regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_H, 0x0000); + if (priv->dmic_one_wire_mode) + regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_H, 0x0400); + else + regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_H, 0x0080);
/* UL turn on */ regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_L, 0x0001);
On Fri, May 29, 2020 at 7:09 PM Mark Brown broonie@kernel.org wrote:
On Fri, May 29, 2020 at 07:04:53PM +0800, Jiaxin Yu wrote:
Supports DMIC one-wire mode. Adds a mixer control to enable and disable.
What is DMIC one wire mode? This doesn't sound like something I'd expect to vary at runtime.
It means: 1 PDM data wire carries 2 channel data (rising edge for left and falling edge for right).
The setting shouldn't and won't change at runtime. Would you suggest putting it into DTS binding?
On Fri, May 29, 2020 at 07:22:43PM +0800, Tzung-Bi Shih wrote:
On Fri, May 29, 2020 at 7:09 PM Mark Brown broonie@kernel.org wrote:
What is DMIC one wire mode? This doesn't sound like something I'd expect to vary at runtime.
It means: 1 PDM data wire carries 2 channel data (rising edge for left and falling edge for right).
I thought that was normal for DMICs - is this selecting between left and right or something?
The setting shouldn't and won't change at runtime. Would you suggest putting it into DTS binding?
Yes.
On Fri, May 29, 2020 at 9:05 PM Mark Brown broonie@kernel.org wrote:
On Fri, May 29, 2020 at 07:22:43PM +0800, Tzung-Bi Shih wrote:
On Fri, May 29, 2020 at 7:09 PM Mark Brown broonie@kernel.org wrote:
What is DMIC one wire mode? This doesn't sound like something I'd expect to vary at runtime.
It means: 1 PDM data wire carries 2 channel data (rising edge for left and falling edge for right).
I thought that was normal for DMICs - is this selecting between left and right or something?
Not sure what is the common name but use the same context here.
MT6358 accepts up to 2 PDM wires for 2 DMICs. If one wire mode is on, MT6358 only accepts 1 PDM wire. If one wire mode is off, MT6358 merges L/R from 2 PDM wires into 1 I2S-like to SoC.
On Sat, May 30, 2020 at 01:26:20AM +0800, Tzung-Bi Shih wrote:
On Fri, May 29, 2020 at 9:05 PM Mark Brown broonie@kernel.org wrote:
I thought that was normal for DMICs - is this selecting between left and right or something?
Not sure what is the common name but use the same context here.
MT6358 accepts up to 2 PDM wires for 2 DMICs. If one wire mode is on, MT6358 only accepts 1 PDM wire. If one wire mode is off, MT6358 merges L/R from 2 PDM wires into 1 I2S-like to SoC.
Oh, interesting - so it's essentially a mixer? Not seen that before but makes sense. In any case this definitely seems like a good fit for a DT property.
participants (3)
-
Jiaxin Yu -
Mark Brown -
Tzung-Bi Shih