[alsa-devel] [PATCH 07/11] wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)
From: Krzysztof Helt krzysztof.h1@wp.pl
Use CS4231P instead of AD1848P (kill the AD1848P).
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl --- Changes since previous version:
1. No reformatting of the snd_ad1848_debug() as the file is going to be killed. 1. Nicer formatting of WSS_SINGLE and WSS_DOUBLE macros.
diff -urp linux-ref/include/sound/ad1848.h linux-2.6.26/include/sound/ad1848.h --- linux-ref/include/sound/ad1848.h 2008-07-31 18:59:20.000000000 +0200 +++ linux-2.6.26/include/sound/ad1848.h 2008-07-31 18:59:06.000000000 +0200 @@ -27,15 +27,6 @@
#include "wss.h" /* temporary till the driver is removed */
-/* IO ports */ - -#define AD1848P( chip, x ) ( (chip) -> port + c_d_c_AD1848##x ) - -#define c_d_c_AD1848REGSEL 0 -#define c_d_c_AD1848REG 1 -#define c_d_c_AD1848STATUS 2 -#define c_d_c_AD1848PIO 3 - /* codec registers */
#define AD1848_LEFT_INPUT 0x00 /* left input control */ diff -urp linux-ref/sound/isa/ad1848/ad1848_lib.c linux-2.6.26/sound/isa/ad1848/ad1848_lib.c --- linux-ref/sound/isa/ad1848/ad1848_lib.c 2008-07-31 18:59:20.000000000 +0200 +++ linux-2.6.26/sound/isa/ad1848/ad1848_lib.c 2008-07-31 19:01:10.000000000 +0200 @@ -103,7 +103,7 @@ static void snd_ad1848_wait(struct snd_w int timeout;
for (timeout = 250; timeout > 0; timeout--) { - if ((inb(AD1848P(chip, REGSEL)) & AD1848_INIT) == 0) + if ((inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) == 0) break; udelay(100); } @@ -115,12 +115,12 @@ void snd_ad1848_out(struct snd_wss *chip { snd_ad1848_wait(chip); #ifdef CONFIG_SND_DEBUG - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) snd_printk(KERN_WARNING "auto calibration time out - " "reg = 0x%x, value = 0x%x\n", reg, value); #endif - outb(chip->mce_bit | reg, AD1848P(chip, REGSEL)); - outb(chip->image[reg] = value, AD1848P(chip, REG)); + outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL)); + outb(chip->image[reg] = value, chip->port + CS4231P(REG)); mb(); snd_printdd("codec out - reg 0x%x = 0x%x\n", chip->mce_bit | reg, value); @@ -132,8 +132,8 @@ static void snd_ad1848_dout(struct snd_w unsigned char reg, unsigned char value) { snd_ad1848_wait(chip); - outb(chip->mce_bit | reg, AD1848P(chip, REGSEL)); - outb(value, AD1848P(chip, REG)); + outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL)); + outb(value, chip->port + CS4231P(REG)); mb(); }
@@ -141,37 +141,37 @@ static unsigned char snd_ad1848_in(struc { snd_ad1848_wait(chip); #ifdef CONFIG_SND_DEBUG - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) snd_printk(KERN_WARNING "auto calibration time out - " "reg = 0x%x\n", reg); #endif - outb(chip->mce_bit | reg, AD1848P(chip, REGSEL)); + outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL)); mb(); - return inb(AD1848P(chip, REG)); + return inb(chip->port + CS4231P(REG)); }
#if 0
static void snd_ad1848_debug(struct snd_wss *chip) { - printk("AD1848 REGS: INDEX = 0x%02x ", inb(AD1848P(chip, REGSEL))); - printk(" STATUS = 0x%02x\n", inb(AD1848P(chip, STATUS))); - printk(" 0x00: left input = 0x%02x ", snd_ad1848_in(chip, 0x00)); - printk(" 0x08: playback format = 0x%02x\n", snd_ad1848_in(chip, 0x08)); - printk(" 0x01: right input = 0x%02x ", snd_ad1848_in(chip, 0x01)); - printk(" 0x09: iface (CFIG 1) = 0x%02x\n", snd_ad1848_in(chip, 0x09)); - printk(" 0x02: AUXA left = 0x%02x ", snd_ad1848_in(chip, 0x02)); - printk(" 0x0a: pin control = 0x%02x\n", snd_ad1848_in(chip, 0x0a)); - printk(" 0x03: AUXA right = 0x%02x ", snd_ad1848_in(chip, 0x03)); - printk(" 0x0b: init & status = 0x%02x\n", snd_ad1848_in(chip, 0x0b)); - printk(" 0x04: AUXB left = 0x%02x ", snd_ad1848_in(chip, 0x04)); - printk(" 0x0c: revision & mode = 0x%02x\n", snd_ad1848_in(chip, 0x0c)); - printk(" 0x05: AUXB right = 0x%02x ", snd_ad1848_in(chip, 0x05)); - printk(" 0x0d: loopback = 0x%02x\n", snd_ad1848_in(chip, 0x0d)); - printk(" 0x06: left output = 0x%02x ", snd_ad1848_in(chip, 0x06)); - printk(" 0x0e: data upr count = 0x%02x\n", snd_ad1848_in(chip, 0x0e)); - printk(" 0x07: right output = 0x%02x ", snd_ad1848_in(chip, 0x07)); - printk(" 0x0f: data lwr count = 0x%02x\n", snd_ad1848_in(chip, 0x0f)); + printk(KERN_DEBUG "AD1848 REGS: INDEX = 0x%02x ", inb(chip->port + CS4231P(REGSEL))); + printk(KERN_DEBUG " STATUS = 0x%02x\n", inb(chip->port + CS4231P(STATUS))); + printk(KERN_DEBUG " 0x00: left input = 0x%02x ", snd_ad1848_in(chip, 0x00)); + printk(KERN_DEBUG " 0x08: playback format = 0x%02x\n", snd_ad1848_in(chip, 0x08)); + printk(KERN_DEBUG " 0x01: right input = 0x%02x ", snd_ad1848_in(chip, 0x01)); + printk(KERN_DEBUG " 0x09: iface (CFIG 1) = 0x%02x\n", snd_ad1848_in(chip, 0x09)); + printk(KERN_DEBUG " 0x02: AUXA left = 0x%02x ", snd_ad1848_in(chip, 0x02)); + printk(KERN_DEBUG " 0x0a: pin control = 0x%02x\n", snd_ad1848_in(chip, 0x0a)); + printk(KERN_DEBUG " 0x03: AUXA right = 0x%02x ", snd_ad1848_in(chip, 0x03)); + printk(KERN_DEBUG " 0x0b: init & status = 0x%02x\n", snd_ad1848_in(chip, 0x0b)); + printk(KERN_DEBUG " 0x04: AUXB left = 0x%02x ", snd_ad1848_in(chip, 0x04)); + printk(KERN_DEBUG " 0x0c: revision & mode = 0x%02x\n", snd_ad1848_in(chip, 0x0c)); + printk(KERN_DEBUG " 0x05: AUXB right = 0x%02x ", snd_ad1848_in(chip, 0x05)); + printk(KERN_DEBUG " 0x0d: loopback = 0x%02x\n", snd_ad1848_in(chip, 0x0d)); + printk(KERN_DEBUG " 0x06: left output = 0x%02x ", snd_ad1848_in(chip, 0x06)); + printk(KERN_DEBUG " 0x0e: data upr count = 0x%02x\n", snd_ad1848_in(chip, 0x0e)); + printk(KERN_DEBUG " 0x07: right output = 0x%02x ", snd_ad1848_in(chip, 0x07)); + printk(KERN_DEBUG " 0x0f: data lwr count = 0x%02x\n", snd_ad1848_in(chip, 0x0f)); }
#endif @@ -187,16 +187,17 @@ static void snd_ad1848_mce_up(struct snd
snd_ad1848_wait(chip); #ifdef CONFIG_SND_DEBUG - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) snd_printk(KERN_WARNING "mce_up - auto calibration time out (0)\n"); #endif spin_lock_irqsave(&chip->reg_lock, flags); chip->mce_bit |= AD1848_MCE; - timeout = inb(AD1848P(chip, REGSEL)); + timeout = inb(chip->port + CS4231P(REGSEL)); if (timeout == 0x80) snd_printk(KERN_WARNING "mce_up [0x%lx]: serious init problem - codec still busy\n", chip->port); if (!(timeout & AD1848_MCE)) - outb(chip->mce_bit | (timeout & 0x1f), AD1848P(chip, REGSEL)); + outb(chip->mce_bit | (timeout & 0x1f), + chip->port + CS4231P(REGSEL)); spin_unlock_irqrestore(&chip->reg_lock, flags); }
@@ -207,21 +208,25 @@ static void snd_ad1848_mce_down(struct s
spin_lock_irqsave(&chip->reg_lock, flags); for (timeout = 5; timeout > 0; timeout--) - inb(AD1848P(chip, REGSEL)); + inb(chip->port + CS4231P(REGSEL)); /* end of cleanup sequence */ - for (timeout = 12000; timeout > 0 && (inb(AD1848P(chip, REGSEL)) & AD1848_INIT); timeout--) + for (timeout = 12000; + timeout > 0 && (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT); + timeout--) udelay(100);
snd_printdd("(1) timeout = %ld\n", timeout);
#ifdef CONFIG_SND_DEBUG - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) - snd_printk(KERN_WARNING "mce_down [0x%lx] - auto calibration time out (0)\n", AD1848P(chip, REGSEL)); + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) + snd_printk(KERN_WARNING + "mce_down [0x%lx] - auto calibration time out (0)\n", + chip->port + CS4231P(REGSEL)); #endif
chip->mce_bit &= ~AD1848_MCE; - reg = inb(AD1848P(chip, REGSEL)); - outb(chip->mce_bit | (reg & 0x1f), AD1848P(chip, REGSEL)); + reg = inb(chip->port + CS4231P(REGSEL)); + outb(chip->mce_bit | (reg & 0x1f), chip->port + CS4231P(REGSEL)); if (reg == 0x80) snd_printk(KERN_WARNING "mce_down [0x%lx]: serious init problem - codec still busy\n", chip->port); if ((reg & AD1848_MCE) == 0) { @@ -252,7 +257,8 @@ static void snd_ad1848_mce_down(struct s "mce_down - auto calibration time out (2)\n");
snd_printdd("(4) jiffies = %lu\n", jiffies); - snd_printd("mce_down - exit = 0x%x\n", inb(AD1848P(chip, REGSEL))); + snd_printd("mce_down - exit = 0x%x\n", + inb(chip->port + CS4231P(REGSEL))); }
static unsigned int snd_ad1848_get_count(unsigned char format, @@ -412,8 +418,8 @@ static int snd_ad1848_open(struct snd_ws
/* ok. now enable and ack CODEC IRQ */ spin_lock_irqsave(&chip->reg_lock, flags); - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ chip->image[AD1848_PIN_CTRL] |= AD1848_IRQ_ENABLE; snd_ad1848_out(chip, AD1848_PIN_CTRL, chip->image[AD1848_PIN_CTRL]); spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -431,8 +437,8 @@ static void snd_ad1848_close(struct snd_ return; /* disable IRQ */ spin_lock_irqsave(&chip->reg_lock, flags); - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ chip->image[AD1848_PIN_CTRL] &= ~AD1848_IRQ_ENABLE; snd_ad1848_out(chip, AD1848_PIN_CTRL, chip->image[AD1848_PIN_CTRL]); spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -449,8 +455,8 @@ static void snd_ad1848_close(struct snd_
/* clear IRQ again */ spin_lock_irqsave(&chip->reg_lock, flags); - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ spin_unlock_irqrestore(&chip->reg_lock, flags);
chip->mode = 0; @@ -572,7 +578,7 @@ static irqreturn_t snd_ad1848_interrupt( snd_pcm_period_elapsed(chip->playback_substream); if ((chip->mode & WSS_MODE_RECORD) && chip->capture_substream) snd_pcm_period_elapsed(chip->capture_substream); - outb(0, AD1848P(chip, STATUS)); /* clear global interrupt bit */ + outb(0, chip->port + CS4231P(STATUS)); /* clear global interrupt bit */ return IRQ_HANDLED; }
@@ -638,8 +644,8 @@ static void snd_ad1848_resume(struct snd snd_ad1848_thinkpad_twiddle(chip, 1);
/* clear any pendings IRQ */ - inb(AD1848P(chip, STATUS)); - outb(0, AD1848P(chip, STATUS)); + inb(chip->port + CS4231P(STATUS)); + outb(0, chip->port + CS4231P(STATUS)); mb();
snd_ad1848_mce_down(chip); @@ -662,7 +668,7 @@ static int snd_ad1848_probe(struct snd_w id = ad1847 = 0; for (i = 0; i < 1000; i++) { mb(); - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) udelay(500); else { spin_lock_irqsave(&chip->reg_lock, flags); @@ -707,8 +713,8 @@ static int snd_ad1848_probe(struct snd_w } } spin_lock_irqsave(&chip->reg_lock, flags); - inb(AD1848P(chip, STATUS)); /* clear any pendings IRQ */ - outb(0, AD1848P(chip, STATUS)); + inb(chip->port + CS4231P(STATUS)); /* clear any pendings IRQ */ + outb(0, chip->port + CS4231P(STATUS)); mb(); spin_unlock_irqrestore(&chip->reg_lock, flags);
---------------------------------------------------------------------- Tanie rozmowy! Sprawdz >>> http://link.interia.pl/f1e91
On 31-07-08 21:07, Krzysztof Helt wrote:
From: Krzysztof Helt krzysztof.h1@wp.pl
Use CS4231P instead of AD1848P (kill the AD1848P).
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl
Changes since previous version:
- No reformatting of the snd_ad1848_debug() as the file is going to be killed.
- Nicer formatting of WSS_SINGLE and WSS_DOUBLE macros.
I believe 1 no. 2 is a cut & paste error? There are no such changes in this patch.
Acked-by: Rene Herman rene.herman@gmail.com
Rene.
participants (2)
-
Krzysztof Helt
-
Rene Herman