[PATCH AUTOSEL 5.10 08/17] ASoC: rt5682: Fix the issue of garbled recording after powerd_dbus_suspend
From: Oder Chiou oder_chiou@realtek.com
[ Upstream commit 6a503e1c455316fd0bfd8188c0a62cce7c5525ca ]
While using the DMIC recording, the garbled data will be captured by the DMIC. It is caused by the critical power of PLL closed in the jack detect function.
Signed-off-by: Oder Chiou oder_chiou@realtek.com Link: https://lore.kernel.org/r/20210716085853.20170-1-oder_chiou@realtek.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5682.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index d9878173ff89..2e41b8c169e5 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -971,10 +971,14 @@ int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert) rt5682_enable_push_button_irq(component, false); snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW); - if (!snd_soc_dapm_get_pin_status(dapm, "MICBIAS")) + if (!snd_soc_dapm_get_pin_status(dapm, "MICBIAS") && + !snd_soc_dapm_get_pin_status(dapm, "PLL1") && + !snd_soc_dapm_get_pin_status(dapm, "PLL2B")) snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1, RT5682_PWR_MB, 0); - if (!snd_soc_dapm_get_pin_status(dapm, "Vref2")) + if (!snd_soc_dapm_get_pin_status(dapm, "Vref2") && + !snd_soc_dapm_get_pin_status(dapm, "PLL1") && + !snd_soc_dapm_get_pin_status(dapm, "PLL2B")) snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1, RT5682_PWR_VREF2, 0); snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
participants (1)
-
Sasha Levin