[RFC v2 00/11] iio: add iio backend device type
This v2 is an addon to initial RFC: https://lore.kernel.org/lkml/20230623140944.2613002-1-olivier.moysan@foss.st...
Despite the "IIO backend" naming has to be changed (as pointed out by Jonathan previously), it has been kept here, for time being. The appropriated naming still has to be discussed later on.
In the previous RFC the "IIO backend" concept was proposed through a set of template APIs.
This v2 implements a functionnal exemple based on STM32 DFSDM, to bring scaling support to this peripheral.
Olivier Moysan (11): iio: introduce iio backend device of: property: add device link support for io-backends dt-bindings: iio: stm32-dfsdm-adc: add scaling support dt-bindings: iio: adc: add scaling support to sd modulator iio: adc: stm32-dfsdm: manage dfsdm as a channel provider iio: adc: stm32-dfsdm: adopt generic channel bindings iio: adc: stm32-dfsdm: add scaling support to dfsdm iio: adc: sd modulator: add scale and offset support ARM: dts: stm32: adopt new dfsdm bindings on stm32mp151 ARM: dts: stm32: add dfsdm pins muxing on stm32mp15 ARM: dts: stm32: add dfsdm iio support on stm32mp157c-ev
.../iio/adc/sigma-delta-modulator.yaml | 9 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 189 ++++++------------ arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 39 ++++ arch/arm/boot/dts/st/stm32mp151.dtsi | 18 +- arch/arm/boot/dts/st/stm32mp157c-ev1.dts | 68 +++++++ drivers/iio/Makefile | 1 + drivers/iio/adc/sd_adc_modulator.c | 106 ++++++++-- drivers/iio/adc/stm32-dfsdm-adc.c | 187 +++++++++++------ drivers/iio/industrialio-backend.c | 107 ++++++++++ drivers/of/property.c | 2 + include/linux/iio/backend.h | 56 ++++++ 11 files changed, 561 insertions(+), 221 deletions(-) create mode 100644 drivers/iio/industrialio-backend.c create mode 100644 include/linux/iio/backend.h
Add scaling support to STM32 DFSDM.
This introduces the following changes: - Add ADC generic channel binding and remove support of deprecated channel bindings. - DFSDM is now implemented as a channel provider, so remove io-channels properties. - Add iio-backend property to connect DFSDM to an SD modulator.
Signed-off-by: Olivier Moysan olivier.moysan@foss.st.com --- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 189 ++++++------------ 1 file changed, 63 insertions(+), 126 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 1970503389aa..128545cedc7f 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -85,22 +85,14 @@ patternProperties: description: Specifies the DFSDM filter instance used. maxItems: 1
- interrupts: - maxItems: 1 + '#address-cells': + const: 1
- st,adc-channels: - description: | - List of single-ended channels muxed for this ADC. - On stm32h7 and stm32mp1: - - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. - $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minimum: 0 - maximum: 7 + '#size-cells': + const: 0
- st,adc-channel-names: - description: List of single-ended channel names. + interrupts: + maxItems: 1
st,filter-order: description: | @@ -111,39 +103,6 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 maximum: 5
- "#io-channel-cells": - const: 1 - - st,adc-channel-types: - description: | - Single-ended channel input type. - - "SPI_R": SPI with data on rising edge (default) - - "SPI_F": SPI with data on falling edge - - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 - - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 - items: - enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - - st,adc-channel-clk-src: - description: | - Conversion clock source. - - "CLKIN": external SPI clock (CLKIN x) - - "CLKOUT": internal SPI clock (CLKOUT) (default) - - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). - - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). - items: - enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - - st,adc-alt-channel: - description: - Must be defined if two sigma delta modulators are - connected on same SPI input. - If not set, channel n is connected to SPI input n. - If set, channel n is connected to SPI input n + 1. - type: boolean - st,filter0-sync: description: Set to 1 to synchronize with DFSDM filter instance 0. @@ -157,14 +116,68 @@ patternProperties: items: - const: rx
+ patternProperties: + "^channel@([0-9]|1[0-9])$": + type: object + $ref: "adc.yaml" + description: Represents the external channels which are connected to the DFSDM. + + properties: + reg: + items: + minimum: 0 + maximum: 19 + + label: + description: | + Unique name to identify channel. + + st,adc-channel-types: + description: | + Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 + items: + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + st,adc-channel-clk-src: + description: | + Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + items: + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + st,adc-alt-channel: + description: + Must be defined if two sigma delta modulators are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + type: boolean + + io-backends: + description: | + phandle to an external sigma delta modulator or internal ADC output. + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - reg + - io-backends + + additionalProperties: false + required: - compatible - reg - interrupts - - st,adc-channels - - st,adc-channel-names - st,filter-order - - "#io-channel-cells"
allOf: - if: @@ -175,14 +188,6 @@ patternProperties:
then: properties: - st,adc-channels: - minItems: 1 - maxItems: 8 - - st,adc-channel-names: - minItems: 1 - maxItems: 8 - st,adc-channel-types: minItems: 1 maxItems: 8 @@ -191,14 +196,6 @@ patternProperties: minItems: 1 maxItems: 8
- io-channels: - description: - From common IIO binding. Used to pipe external sigma delta - modulator or internal ADC output to DFSDM channel. - - required: - - io-channels - - if: properties: compatible: @@ -207,12 +204,6 @@ patternProperties:
then: properties: - st,adc-channels: - maxItems: 1 - - st,adc-channel-names: - maxItems: 1 - st,adc-channel-types: maxItems: 1
@@ -237,15 +228,9 @@ patternProperties: "#sound-dai-cells": const: 0
- io-channels: - description: - From common IIO binding. Used to pipe external sigma delta - modulator or internal ADC output to DFSDM channel. - required: - compatible - "#sound-dai-cells" - - io-channels
allOf: - if: @@ -278,52 +263,4 @@ allOf: minimum: 0 maximum: 5
-examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/stm32mp1-clks.h> - dfsdm: dfsdm@4400d000 { - compatible = "st,stm32mp1-dfsdm"; - reg = <0x4400d000 0x800>; - clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>; - clock-names = "dfsdm", "audio"; - #address-cells = <1>; - #size-cells = <0>; - - dfsdm0: filter@0 { - compatible = "st,stm32-dfsdm-dmic"; - reg = <0>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 101 0x400 0x01>; - dma-names = "rx"; - #io-channel-cells = <1>; - st,adc-channels = <1>; - st,adc-channel-names = "dmic0"; - st,adc-channel-types = "SPI_R"; - st,adc-channel-clk-src = "CLKOUT"; - st,filter-order = <5>; - - asoc_pdm0: dfsdm-dai { - compatible = "st,stm32h7-dfsdm-dai"; - #sound-dai-cells = <0>; - io-channels = <&dfsdm0 0>; - }; - }; - - dfsdm_pdm1: filter@1 { - compatible = "st,stm32-dfsdm-adc"; - reg = <1>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmamux1 102 0x400 0x01>; - dma-names = "rx"; - #io-channel-cells = <1>; - st,adc-channels = <2 3>; - st,adc-channel-names = "in2", "in3"; - st,adc-channel-types = "SPI_R", "SPI_R"; - st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F"; - io-channels = <&sd_adc2 &sd_adc3>; - st,filter-order = <1>; - }; - }; - ...
On Thu, Jul 27, 2023 at 05:03:14PM +0200, Olivier Moysan wrote:
Add scaling support to STM32 DFSDM.
This introduces the following changes:
Why?
- Add ADC generic channel binding and remove support of deprecated
channel bindings.
When was it deprecated?
- DFSDM is now implemented as a channel provider, so remove io-channels
properties.
- Add iio-backend property to connect DFSDM to an SD modulator.
io-backends
All sorts of ABI issues with this change. Please explain why you don't care.
Signed-off-by: Olivier Moysan olivier.moysan@foss.st.com
.../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 189 ++++++------------ 1 file changed, 63 insertions(+), 126 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 1970503389aa..128545cedc7f 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -85,22 +85,14 @@ patternProperties: description: Specifies the DFSDM filter instance used. maxItems: 1
interrupts:maxItems: 1
'#address-cells':const: 1
st,adc-channels:description: |List of single-ended channels muxed for this ADC.On stm32h7 and stm32mp1:- For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.- For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.$ref: /schemas/types.yaml#/definitions/uint32-arrayitems:minimum: 0maximum: 7
'#size-cells':const: 0
st,adc-channel-names:description: List of single-ended channel names.
interrupts:maxItems: 1 st,filter-order: description: |@@ -111,39 +103,6 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 maximum: 5
"#io-channel-cells":const: 1st,adc-channel-types:description: |Single-ended channel input type.- "SPI_R": SPI with data on rising edge (default)- "SPI_F": SPI with data on falling edge- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0items:enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]$ref: /schemas/types.yaml#/definitions/non-unique-string-arrayst,adc-channel-clk-src:description: |Conversion clock source.- "CLKIN": external SPI clock (CLKIN x)- "CLKOUT": internal SPI clock (CLKOUT) (default)- "CLKOUT_F": internal SPI clock divided by 2 (falling edge).- "CLKOUT_R": internal SPI clock divided by 2 (rising edge).items:enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]$ref: /schemas/types.yaml#/definitions/non-unique-string-arrayst,adc-alt-channel:description:Must be defined if two sigma delta modulators areconnected on same SPI input.If not set, channel n is connected to SPI input n.If set, channel n is connected to SPI input n + 1.type: booleanst,filter0-sync: description: Set to 1 to synchronize with DFSDM filter instance 0.@@ -157,14 +116,68 @@ patternProperties: items: - const: rx
- patternProperties:
"^channel@([0-9]|1[0-9])$":type: object$ref: "adc.yaml"description: Represents the external channels which are connected to the DFSDM.properties:reg:items:minimum: 0maximum: 19label:description: |Unique name to identify channel.st,adc-channel-types:description: |Single-ended channel input type.- "SPI_R": SPI with data on rising edge (default)- "SPI_F": SPI with data on falling edge- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0items:enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]$ref: /schemas/types.yaml#/definitions/non-unique-string-arrayst,adc-channel-clk-src:description: |Conversion clock source.- "CLKIN": external SPI clock (CLKIN x)- "CLKOUT": internal SPI clock (CLKOUT) (default)- "CLKOUT_F": internal SPI clock divided by 2 (falling edge).- "CLKOUT_R": internal SPI clock divided by 2 (rising edge).items:enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]$ref: /schemas/types.yaml#/definitions/non-unique-string-arrayst,adc-alt-channel:description:Must be defined if two sigma delta modulators areconnected on same SPI input.If not set, channel n is connected to SPI input n.If set, channel n is connected to SPI input n + 1.type: booleanio-backends:description: |phandle to an external sigma delta modulator or internal ADC output.$ref: /schemas/types.yaml#/definitions/phandlerequired:- reg- io-backendsadditionalProperties: false- required: - compatible - reg - interrupts
- st,adc-channels- st,adc-channel-names - st,filter-order- "#io-channel-cells"allOf: - if:
@@ -175,14 +188,6 @@ patternProperties:
then: properties:
st,adc-channels:minItems: 1maxItems: 8st,adc-channel-names:minItems: 1maxItems: 8st,adc-channel-types: minItems: 1 maxItems: 8@@ -191,14 +196,6 @@ patternProperties: minItems: 1 maxItems: 8
io-channels:description:From common IIO binding. Used to pipe external sigma deltamodulator or internal ADC output to DFSDM channel.required:- io-channels- if: properties: compatible:@@ -207,12 +204,6 @@ patternProperties:
then: properties:
st,adc-channels:maxItems: 1st,adc-channel-names:maxItems: 1st,adc-channel-types: maxItems: 1@@ -237,15 +228,9 @@ patternProperties: "#sound-dai-cells": const: 0
io-channels:description:From common IIO binding. Used to pipe external sigma deltamodulator or internal ADC output to DFSDM channel.required: - compatible - "#sound-dai-cells"- io-channelsallOf:
- if:
@@ -278,52 +263,4 @@ allOf: minimum: 0 maximum: 5
-examples:
- |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/stm32mp1-clks.h>
- dfsdm: dfsdm@4400d000 {
compatible = "st,stm32mp1-dfsdm";reg = <0x4400d000 0x800>;clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>;clock-names = "dfsdm", "audio";#address-cells = <1>;#size-cells = <0>;dfsdm0: filter@0 {compatible = "st,stm32-dfsdm-dmic";reg = <0>;interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;dmas = <&dmamux1 101 0x400 0x01>;dma-names = "rx";#io-channel-cells = <1>;st,adc-channels = <1>;st,adc-channel-names = "dmic0";st,adc-channel-types = "SPI_R";st,adc-channel-clk-src = "CLKOUT";st,filter-order = <5>;asoc_pdm0: dfsdm-dai {compatible = "st,stm32h7-dfsdm-dai";#sound-dai-cells = <0>;io-channels = <&dfsdm0 0>;};};dfsdm_pdm1: filter@1 {compatible = "st,stm32-dfsdm-adc";reg = <1>;interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;dmas = <&dmamux1 102 0x400 0x01>;dma-names = "rx";#io-channel-cells = <1>;st,adc-channels = <2 3>;st,adc-channel-names = "in2", "in3";st,adc-channel-types = "SPI_R", "SPI_R";st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";io-channels = <&sd_adc2 &sd_adc3>;st,filter-order = <1>;};- };
...
2.25.1
Hi Rob,
On 8/11/23 19:10, Rob Herring wrote:
On Thu, Jul 27, 2023 at 05:03:14PM +0200, Olivier Moysan wrote:
Add scaling support to STM32 DFSDM.
This introduces the following changes:
Why?
This RFC is an attempt to support scaling through a change in DFSDM topology.
These changes have some impacts on DFSDM and sd modulator bindings. To keep things simple in this RFC, I skipped legacy support, to put the emphasis on the new bindings proposal. There are two changes here: adoption of the generic IIO bindings and new "io-backends" property. This needs to be put in two separate patches at the end, I think (as already done for driver patches)
Anyway, the current bindings would become deprecated with these changes. I still have to consider how to support these legacy bindings for next step, However.
BRs Olivier
- Add ADC generic channel binding and remove support of deprecated
channel bindings.
When was it deprecated?
- DFSDM is now implemented as a channel provider, so remove io-channels
properties.
- Add iio-backend property to connect DFSDM to an SD modulator.
io-backends
All sorts of ABI issues with this change. Please explain why you don't care.
Signed-off-by: Olivier Moysan olivier.moysan@foss.st.com
.../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 189 ++++++------------ 1 file changed, 63 insertions(+), 126 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 1970503389aa..128545cedc7f 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -85,22 +85,14 @@ patternProperties: description: Specifies the DFSDM filter instance used. maxItems: 1
interrupts:maxItems: 1
'#address-cells':const: 1
st,adc-channels:description: |List of single-ended channels muxed for this ADC.On stm32h7 and stm32mp1:- For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.- For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.$ref: /schemas/types.yaml#/definitions/uint32-arrayitems:minimum: 0maximum: 7
'#size-cells':const: 0
st,adc-channel-names:description: List of single-ended channel names.
interrupts:maxItems: 1 st,filter-order: description: |@@ -111,39 +103,6 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 maximum: 5
"#io-channel-cells":const: 1st,adc-channel-types:description: |Single-ended channel input type.- "SPI_R": SPI with data on rising edge (default)- "SPI_F": SPI with data on falling edge- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0items:enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]$ref: /schemas/types.yaml#/definitions/non-unique-string-arrayst,adc-channel-clk-src:description: |Conversion clock source.- "CLKIN": external SPI clock (CLKIN x)- "CLKOUT": internal SPI clock (CLKOUT) (default)- "CLKOUT_F": internal SPI clock divided by 2 (falling edge).- "CLKOUT_R": internal SPI clock divided by 2 (rising edge).items:enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]$ref: /schemas/types.yaml#/definitions/non-unique-string-arrayst,adc-alt-channel:description:Must be defined if two sigma delta modulators areconnected on same SPI input.If not set, channel n is connected to SPI input n.If set, channel n is connected to SPI input n + 1.type: booleanst,filter0-sync: description: Set to 1 to synchronize with DFSDM filter instance 0.@@ -157,14 +116,68 @@ patternProperties: items: - const: rx
- patternProperties:
"^channel@([0-9]|1[0-9])$":type: object$ref: "adc.yaml"description: Represents the external channels which are connected to the DFSDM.properties:reg:items:minimum: 0maximum: 19label:description: |Unique name to identify channel.st,adc-channel-types:description: |Single-ended channel input type.- "SPI_R": SPI with data on rising edge (default)- "SPI_F": SPI with data on falling edge- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0items:enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]$ref: /schemas/types.yaml#/definitions/non-unique-string-arrayst,adc-channel-clk-src:description: |Conversion clock source.- "CLKIN": external SPI clock (CLKIN x)- "CLKOUT": internal SPI clock (CLKOUT) (default)- "CLKOUT_F": internal SPI clock divided by 2 (falling edge).- "CLKOUT_R": internal SPI clock divided by 2 (rising edge).items:enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]$ref: /schemas/types.yaml#/definitions/non-unique-string-arrayst,adc-alt-channel:description:Must be defined if two sigma delta modulators areconnected on same SPI input.If not set, channel n is connected to SPI input n.If set, channel n is connected to SPI input n + 1.type: booleanio-backends:description: |phandle to an external sigma delta modulator or internal ADC output.$ref: /schemas/types.yaml#/definitions/phandlerequired:- reg- io-backendsadditionalProperties: falserequired: - compatible - reg - interrupts
- st,adc-channels- st,adc-channel-names - st,filter-order- "#io-channel-cells" allOf: - if:@@ -175,14 +188,6 @@ patternProperties:
then: properties:
st,adc-channels:minItems: 1maxItems: 8st,adc-channel-names:minItems: 1maxItems: 8st,adc-channel-types: minItems: 1 maxItems: 8@@ -191,14 +196,6 @@ patternProperties: minItems: 1 maxItems: 8
io-channels:description:From common IIO binding. Used to pipe external sigma deltamodulator or internal ADC output to DFSDM channel.required:- io-channels- if: properties: compatible:@@ -207,12 +204,6 @@ patternProperties:
then: properties:
st,adc-channels:maxItems: 1st,adc-channel-names:maxItems: 1st,adc-channel-types: maxItems: 1@@ -237,15 +228,9 @@ patternProperties: "#sound-dai-cells": const: 0
io-channels:description:From common IIO binding. Used to pipe external sigma deltamodulator or internal ADC output to DFSDM channel.required: - compatible - "#sound-dai-cells"- io-channelsallOf:
- if:
@@ -278,52 +263,4 @@ allOf: minimum: 0 maximum: 5
-examples:
- |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/stm32mp1-clks.h>
- dfsdm: dfsdm@4400d000 {
compatible = "st,stm32mp1-dfsdm";reg = <0x4400d000 0x800>;clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>;clock-names = "dfsdm", "audio";#address-cells = <1>;#size-cells = <0>;dfsdm0: filter@0 {compatible = "st,stm32-dfsdm-dmic";reg = <0>;interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;dmas = <&dmamux1 101 0x400 0x01>;dma-names = "rx";#io-channel-cells = <1>;st,adc-channels = <1>;st,adc-channel-names = "dmic0";st,adc-channel-types = "SPI_R";st,adc-channel-clk-src = "CLKOUT";st,filter-order = <5>;asoc_pdm0: dfsdm-dai {compatible = "st,stm32h7-dfsdm-dai";#sound-dai-cells = <0>;io-channels = <&dfsdm0 0>;};};dfsdm_pdm1: filter@1 {compatible = "st,stm32-dfsdm-adc";reg = <1>;interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;dmas = <&dmamux1 102 0x400 0x01>;dma-names = "rx";#io-channel-cells = <1>;st,adc-channels = <2 3>;st,adc-channel-names = "in2", "in3";st,adc-channel-types = "SPI_R", "SPI_R";st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";io-channels = <&sd_adc2 &sd_adc3>;st,filter-order = <1>;};- };
- ...
-- 2.25.1
participants (2)
-
Olivier Moysan -
Rob Herring