Hi,

I'd like to read the peak values of the RME HDSP madi soundcard. To do this, I use the function: snd_hwdep_ioctl() with the ioctl command "SNDRV_HDSPM_IOCTL_GET_PEAK_RMS".

I use the following code:

// create container hdspm_peak_rms_t madi_peak_rms; hdspm_peak_rms_t* ptr_madi_peak_rms = &madi_peak_rms;

//snd_hwdep_open ...

// fill the container with values snd_hwdep_ioctl(hw, SNDRV_HDSPM_IOCTL_GET_PEAK_RMS, (void *)&ptr_madi_peak_rms);

for (unsigned int chn = 0; chn < numberOfChannels; ++chn) { //put values from madi soundcard into std::vector containers currentInputPeak[chn] = madi_peak_rms.level_offset[chn]; currentPlaybackPeak[chn] = madi_peak_rms.level_offset[chn+64]; currentOutputPeak[chn] = madi_peak_rms.level_offset[chn+128]; }

The upper 24 bit of the read out values should be the signal peak. The next 8 bit seem to represent a clipping counter.

For the first eight input channels this works pretty well. But for every eighth channel of all further channels (input, playback and output) the peak value is to low and is not in time with the other channels.

Do i use the function in the right way?

Is there a special function to get the peak meter values? (In a similar way as for ADAT soundcards?)

Best regards.