Change the xinvert value from 0 to 1 on the "Capture Switch" control WM8960 datasheet is shown as follows: Bit 7 at 00h and 01h register address 1 : Enable Mute, 0 : Disable Mute

Signed-off-by: JongHo Kim furmuwon@gmail.com --- sound/soc/codecs/wm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 0563753..5380798 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -229,7 +229,7 @@ SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL, SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL, 6, 1, 0), SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL, - 7, 1, 0), + 7, 1, 1),

SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume", WM8960_INBMIX1, 4, 7, 0, lineinboost_tlv),