Re: [alsa-devel] [PATCH] ASoC: fsl_asrc: refine the setting of internal clock divider
Hi
On Thu, Oct 17, 2019 at 02:21:08PM +0800, Shengjiu Wang wrote:
For P2P output, the output divider should align with the output sample
I think we should avoid "P2P" (or "M2M") keyword in the mainline code as we know M2M will never get merged while somebody working with the mainline and caring about new feature might be confused.
Ok. But we still curious that is there a way to upstream m2m?
rate, if use ideal sample rate, there will be a lot of overload, which would cause underrun.
If I understand it correctly, setting to ideal ratio provides a faster converting speed but increases the load of the processor of ASRC. So we choose a slower converting speed here since real- time playback mode doesn't really need a faster conversion?
Yes. Slower speed is enough for real-time playback
It makes sense to me, yet I feel that the delay at the beginning of the audio playback might be longer as a compromise. I am okay with this decision though...
The maximum divider of asrc clock is 1024, but there is no judgement for this limitaion in driver, which may cause the divider setting not correct.
For non-ideal ratio mode, the clock rate should divide the sample rate with no remainder, and the quotient should be less than 1024.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
sound/soc/fsl/fsl_asrc.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 0bf91a6f54b9..44d05ec28bd3 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -260,7 +260,7 @@ static int fsl_asrc_set_ideal_ratio(struct
fsl_asrc_pair *pair,
- of struct asrc_config which includes in/output sample rate, width,
channel
- and clock settings.
*/ -static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) +static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool p2p) { struct asrc_config *config = pair->config; struct fsl_asrc *asrc_priv = pair->asrc_priv; @@ -268,7 +268,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) enum asrc_word_width input_word_width; enum asrc_word_width output_word_width; u32 inrate, outrate, indiv, outdiv;
u32 clk_index[2], div[2];
u32 clk_index[2], div[2], rem[2];u64 clk_rate; int in, out, channels; int pre_proc, post_proc; struct clk *clk;@@ -351,7 +352,9 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair
*pair)
/* We only have output clock for ideal ratio mode */ clk = asrc_priv->asrck_clk[clk_index[ideal ? OUT : IN]];
div[IN] = clk_get_rate(clk) / inrate;
clk_rate = clk_get_rate(clk);The fsl_asrc.c file has config.inclk being set to INCLK_NONE and this sets the "ideal" in this function to true. So, although we tend to not use ideal ratio setting for p2p cases, yet the input clock is still not physically connected, so we still use output clock for div[IN] calculation?
For p2p case, it can be ideal or non-ideal. For non-ideal, we still use Output clock for div calculation.
I am thinking something simplier: if we decided not to use ideal ratio for "P2P", instead of adding "bool p2p" with the confusing "ideal" in this function, could we just set config.inclk to the same clock as the output one for "P2P"? By doing so, "P2P" won't go through ideal ratio mode while still having a clock rate from the output clock for div[IN] calculation here.
Bool p2p is to force output rate to be sample rate, no impact to ideal Ratio mode.
rem[IN] = do_div(clk_rate, inrate);div[IN] = (u32)clk_rate; if (div[IN] == 0) {Could we check div[IN] and rem[IN] here? Like: if (div[IN] == 0 || div[IN] > 1024) { pair_err(); goto out; }
if (!ideal && rem[IN]) { pair_err(); goto out; }According to your commit log, I think the max-1024 limitation should be applied to all cases, not confined to "!ideal" cases right? And we should add some comments also, indicating it is limited by hardware.
For ideal mode, my test result is the divider not impact the output result. Which means it is ok for ideal mode even divider is not correct...
pair_err("failed to support input sample rate %dHz byasrck_%x\n",
inrate, clk_index[ideal ? OUT : IN]); @@-360,11 +363,20 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
clk = asrc_priv->asrck_clk[clk_index[OUT]];
/* Use fixed output rate for Ideal Ratio mode (INCLK_NONE) */if (ideal)div[OUT] = clk_get_rate(clk) / IDEAL_RATIO_RATE;elsediv[OUT] = clk_get_rate(clk) / outrate;
/** When P2P mode, output rate should align with the out samplerate.* if set too high output rate, there will be lots of Overload.* When M2M mode, output rate should also need to align with the- out
For this "should", do you actually mean "M2M could also"? Sorry, I'm just trying to understand everyting here, not intentionally being picky at words. My understanding is that we still keep the ideal ratio setting because "M2M" still uses it.
We use IDEAL_RATIO_RATE as output rate for m2m mode, it likes a Tricky operation, in order to improve the performance. I think The correct operation is to use the real output rate, but the performance Is bad. So it is a compromise.
* samplerate, but M2M must use less time to achieve goodperformance.
*/clk_rate = clk_get_rate(clk);if (p2p || !ideal) {rem[OUT] = do_div(clk_rate, outrate);div[OUT] = clk_rate;} else {rem[OUT] = do_div(clk_rate, IDEAL_RATIO_RATE);div[OUT] = clk_rate;} if (div[OUT] == 0) { pair_err("failed to support output sample rate %dHz byasrck_%x\n", @@ -372,6 +384,16 @@ static int fsl_asrc_config_pair(struct
fsl_asrc_pair *pair)
return -EINVAL; }
if (!ideal && (div[IN] > 1024 || div[OUT] > 1024 ||rem[IN] != 0 || rem[OUT] != 0)) {if (!ideal && (div[IN] > 1024 || div[OUT] > 1024 || rem[IN] ||- rem[OUT] != 0)) {
So for ideal == true, these limitaions are not applied any more? Remember that the "ideal" is true for "p2p == true" cases here.
No, not applied. for ideal, the div don't impact the output result Even it is not accurate.
pair_err("The divider can't be used for non ideal mode\n");return -EINVAL;}/* Divider range is [1, 1024] */div[IN] = min_t(u32, 1024, div[IN]);div[OUT] = min_t(u32, 1024, div[OUT]);Hmm, this looks like we want to allow ideal ratio cases and p2p cases to operate any way, even if the divider wasn't within the range to get the in/out rates from the output clock?
Yes. We still allow the p2p = true, ideal = false. Note that p2p is not Equal to ideal.
Best regards Wang shengjiu
On Wed, Oct 23, 2019 at 06:25:20AM +0000, S.j. Wang wrote:
On Thu, Oct 17, 2019 at 02:21:08PM +0800, Shengjiu Wang wrote:
For P2P output, the output divider should align with the output sample
I think we should avoid "P2P" (or "M2M") keyword in the mainline code as we know M2M will never get merged while somebody working with the mainline and caring about new feature might be confused.
Ok. But we still curious that is there a way to upstream m2m?
Hmm..I would love to see that happening. Here is an old discussion that you may want to take a look: https://mailman.alsa-project.org/pipermail/alsa-devel/2014-May/076797.html
It makes sense to me, yet I feel that the delay at the beginning of the audio playback might be longer as a compromise. I am okay with this decision though...
The maximum divider of asrc clock is 1024, but there is no judgement for this limitaion in driver, which may cause the divider setting not correct.
For non-ideal ratio mode, the clock rate should divide the sample rate with no remainder, and the quotient should be less than 1024.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
@@ -351,7 +352,9 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair
*pair)
/* We only have output clock for ideal ratio mode */ clk = asrc_priv->asrck_clk[clk_index[ideal ? OUT : IN]];
div[IN] = clk_get_rate(clk) / inrate;
clk_rate = clk_get_rate(clk);The fsl_asrc.c file has config.inclk being set to INCLK_NONE and this sets the "ideal" in this function to true. So, although we tend to not use ideal ratio setting for p2p cases, yet the input clock is still not physically connected, so we still use output clock for div[IN] calculation?
For p2p case, it can be ideal or non-ideal. For non-ideal, we still use Output clock for div calculation.
I am thinking something simplier: if we decided not to use ideal ratio for "P2P", instead of adding "bool p2p" with the confusing "ideal" in this function, could we just set config.inclk to the same clock as the output one for "P2P"? By doing so, "P2P" won't go through ideal ratio mode while still having a clock rate from the output clock for div[IN] calculation here.
Bool p2p is to force output rate to be sample rate, no impact to ideal Ratio mode.
I just realized that the function has a bottom part for ideal mode exclusively -- if we treat p2p as !ideal, those configurations will be missing. So you're right, should have an extra boolean variable.
rem[IN] = do_div(clk_rate, inrate);div[IN] = (u32)clk_rate; if (div[IN] == 0) {Could we check div[IN] and rem[IN] here? Like: if (div[IN] == 0 || div[IN] > 1024) { pair_err(); goto out; }
if (!ideal && rem[IN]) { pair_err(); goto out; }According to your commit log, I think the max-1024 limitation should be applied to all cases, not confined to "!ideal" cases right? And we should add some comments also, indicating it is limited by hardware.
For ideal mode, my test result is the divider not impact the output result. Which means it is ok for ideal mode even divider is not correct...
OK.
pair_err("failed to support input sample rate %dHz byasrck_%x\n",
inrate, clk_index[ideal ? OUT : IN]); @@-360,11 +363,20 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
clk = asrc_priv->asrck_clk[clk_index[OUT]];
/* Use fixed output rate for Ideal Ratio mode (INCLK_NONE) */if (ideal)div[OUT] = clk_get_rate(clk) / IDEAL_RATIO_RATE;elsediv[OUT] = clk_get_rate(clk) / outrate;
/** When P2P mode, output rate should align with the out samplerate.* if set too high output rate, there will be lots of Overload.* When M2M mode, output rate should also need to align with the- out
For this "should", do you actually mean "M2M could also"? Sorry, I'm just trying to understand everyting here, not intentionally being picky at words. My understanding is that we still keep the ideal ratio setting because "M2M" still uses it.
We use IDEAL_RATIO_RATE as output rate for m2m mode, it likes a Tricky operation, in order to improve the performance. I think The correct operation is to use the real output rate, but the performance Is bad. So it is a compromise.
I see.
* samplerate, but M2M must use less time to achieve goodperformance.
*/clk_rate = clk_get_rate(clk);if (p2p || !ideal) {rem[OUT] = do_div(clk_rate, outrate);div[OUT] = clk_rate;} else {rem[OUT] = do_div(clk_rate, IDEAL_RATIO_RATE);div[OUT] = clk_rate;} if (div[OUT] == 0) { pair_err("failed to support output sample rate %dHz byasrck_%x\n", @@ -372,6 +384,16 @@ static int fsl_asrc_config_pair(struct
fsl_asrc_pair *pair)
return -EINVAL; }
if (!ideal && (div[IN] > 1024 || div[OUT] > 1024 ||rem[IN] != 0 || rem[OUT] != 0)) {if (!ideal && (div[IN] > 1024 || div[OUT] > 1024 || rem[IN] ||- rem[OUT] != 0)) {
So for ideal == true, these limitaions are not applied any more? Remember that the "ideal" is true for "p2p == true" cases here.
No, not applied. for ideal, the div don't impact the output result Even it is not accurate.
I see.
pair_err("The divider can't be used for non ideal mode\n");return -EINVAL;}/* Divider range is [1, 1024] */div[IN] = min_t(u32, 1024, div[IN]);div[OUT] = min_t(u32, 1024, div[OUT]);Hmm, this looks like we want to allow ideal ratio cases and p2p cases to operate any way, even if the divider wasn't within the range to get the in/out rates from the output clock?
Yes. We still allow the p2p = true, ideal = false. Note that p2p is not Equal to ideal.
Got it.
Overall, I feel it's better to have a naming to state the purpose of using ideal configurations without the IDEAL_RATIO_RATE setup. bool use_ideal_rate; And we can put into the asrc_config structure if there's no major problem.
So the condition check for the calculation would be: + if (ideal && config->use_ideal_rate) + rem[OUT] = do_div(clk_rate, IDEAL_RATIO_RATE); + else + rem[OUT] = do_div(clk_rate, outrate); + div[OUT] = clk_rate;
And for that if (!ideal && div[IN]....rem[OUT]), I feel it would be clear to have them separately, as the existing "div[IN] == 0" and "div[OUT] == 0" checks, so that we can tell users which side of the divider is out of range and what the sample rate and clock rate are.
Thanks Nicolin
participants (2)
-
Nicolin Chen -
S.j. Wang