[alsa-devel] [PATCH] hda: Enable SPDIF in/out on some stac9205 boards
Added support for some boards with SPDIF in/out, and cleaned up the GPIO enable function. --- Signed-off-by: Matthew Ranostay mranostay@embeddedalley.com
diff -r 631a50e624df pci/hda/patch_sigmatel.c --- a/pci/hda/patch_sigmatel.c Mon Jul 16 11:01:30 2007 +0200 +++ b/pci/hda/patch_sigmatel.c Mon Jul 16 16:34:46 2007 -0400 @@ -44,6 +44,7 @@ enum {
enum { STAC_9205_REF, + STAC_M43xx, STAC_9205_MODELS };
@@ -218,7 +219,6 @@ static hda_nid_t stac9205_pin_nids[12] = 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x14, 0x16, 0x17, 0x18, 0x21, 0x22, - };
static int stac92xx_dmux_enum_info(struct snd_kcontrol *kcontrol, @@ -773,7 +773,8 @@ static unsigned int ref9205_pin_configs[ };
static unsigned int *stac9205_brd_tbl[STAC_9205_MODELS] = { - ref9205_pin_configs, + [STAC_REF] = ref9205_pin_configs, + [STAC_M43xx] = NULL, };
static const char *stac9205_models[STAC_9205_MODELS] = { @@ -784,6 +785,10 @@ static struct snd_pci_quirk stac9205_cfg /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_9205_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x01f8, + "Dell Precision", STAC_M43xx), + SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x01ff, + "Dell Precision", STAC_M43xx), {} /* terminator */ };
@@ -813,48 +818,52 @@ static int stac92xx_save_bios_config_reg return 0; }
+static void stac92xx_set_config_reg(struct hda_codec *codec, hda_nid_t pin_nid, unsigned int pin_config) +{ + int i; + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, + pin_config & 0x000000ff); + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, + (pin_config & 0x0000ff00) >> 8); + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, + (pin_config & 0x00ff0000) >> 16); + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, + pin_config >> 24); + i = snd_hda_codec_read(codec, pin_nid, 0, + AC_VERB_GET_CONFIG_DEFAULT, + 0x00); + snd_printdd(KERN_INFO "hda_codec: pin nid %2.2x pin config %8.8x\n", pin_nid, i); +} + static void stac92xx_set_config_regs(struct hda_codec *codec) { int i; struct sigmatel_spec *spec = codec->spec; - unsigned int pin_cfg; - - if (! spec->pin_nids || ! spec->pin_configs) - return; - - for (i = 0; i < spec->num_pins; i++) { - snd_hda_codec_write(codec, spec->pin_nids[i], 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, - spec->pin_configs[i] & 0x000000ff); - snd_hda_codec_write(codec, spec->pin_nids[i], 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, - (spec->pin_configs[i] & 0x0000ff00) >> 8); - snd_hda_codec_write(codec, spec->pin_nids[i], 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, - (spec->pin_configs[i] & 0x00ff0000) >> 16); - snd_hda_codec_write(codec, spec->pin_nids[i], 0, - AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, - spec->pin_configs[i] >> 24); - pin_cfg = snd_hda_codec_read(codec, spec->pin_nids[i], 0, - AC_VERB_GET_CONFIG_DEFAULT, - 0x00); - snd_printdd(KERN_INFO "hda_codec: pin nid %2.2x pin config %8.8x\n", spec->pin_nids[i], pin_cfg); - } -} - -static void stac92xx_enable_eapd(struct hda_codec *codec) -{ - /* Configure GPIO0 as output */ + if (!spec->pin_configs) + return; + + for (i=0; i < spec->num_pins; i++) + stac92xx_set_config_reg(codec, spec->pin_nids[i], + spec->pin_configs[i]); +} + +static void stac92xx_enable_gpio_mask(struct hda_codec *codec,int gpio_mask,int gpio_data) +{ + /* Configure GPIOx as output */ snd_hda_codec_write(codec, codec->afg, 0, - AC_VERB_SET_GPIO_DIRECTION, 0x00000001); - /* Configure GPIO0 as CMOS */ + AC_VERB_SET_GPIO_DIRECTION, gpio_mask); + /* Configure GPIOx as CMOS */ snd_hda_codec_write(codec, codec->afg, 0, 0x7e7, 0x00000000); - /* Assert GPIO0 high */ + /* Assert GPIOx */ snd_hda_codec_write(codec, codec->afg, 0, - AC_VERB_SET_GPIO_DATA, 0x00000001); - /* Enable GPIO0 */ + AC_VERB_SET_GPIO_DATA, gpio_data); + /* Enable GPIOx */ snd_hda_codec_write(codec, codec->afg, 0, - AC_VERB_SET_GPIO_MASK, 0x00000001); + AC_VERB_SET_GPIO_MASK, gpio_mask); }
/* @@ -2233,7 +2242,7 @@ static int patch_stac927x(struct hda_cod }
spec->multiout.dac_nids = spec->dac_nids; - stac92xx_enable_eapd(codec); + stac92xx_enable_gpio_mask(codec, 0x00000001, 0x00000001); /* GPIO0 High = Enable EAPD */ err = stac92xx_parse_auto_config(codec, 0x1e, 0x20); if (!err) { @@ -2258,7 +2267,7 @@ static int patch_stac9205(struct hda_cod static int patch_stac9205(struct hda_codec *codec) { struct sigmatel_spec *spec; - int err; + int err, gpio_mask, gpio_data;
spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -2295,8 +2304,19 @@ static int patch_stac9205(struct hda_cod spec->mixer = stac9205_mixer;
spec->multiout.dac_nids = spec->dac_nids; - stac92xx_enable_eapd(codec); - + + if (spec->board_config == STAC_M43xx) { + /* Enable SPDIF in/out */ + stac92xx_set_config_reg(codec, 0x1f, 0x01441030); + stac92xx_set_config_reg(codec, 0x20, 0x1c410030); + + gpio_mask = 0x00000007; /* GPIO0-2 */ + gpio_data = 0x00000005; /* GPIO0 High = EAPD, GPIO1 Low = DRM, GPIO2 High = Headphone Mute */ + } + else + gpio_mask = gpio_data = 0x00000001; /* GPIO0 High = EAPD */ + + stac92xx_enable_gpio_mask(codec, gpio_mask, gpio_data); err = stac92xx_parse_auto_config(codec, 0x1f, 0x20); if (!err) { if (spec->board_config < 0) {
At Mon, 16 Jul 2007 17:05:20 -0400, Matthew Ranostay wrote:
Added support for some boards with SPDIF in/out, and cleaned up the GPIO enable function.
Signed-off-by: Matthew Ranostay mranostay@embeddedalley.com
Thanks, applied to HG tree now (with minor modifications to fix coding style).
Takashi
participants (2)
-
Matthew Ranostay
-
Takashi Iwai