VMID Control 0 BIT[2:1] is VMID Divider Enable and Select

00 = VMID disabled (for OFF mode) 01 = 2 x 50kΩ divider (for normal operation) 10 = 2 x 250kΩ divider (for low power standby) 11 = 2 x 5kΩ divider (for fast start-up)

So WM8903_VMID_RES_250K should be 2 << 1, which is 4.

Signed-off-by: Axel Lin axel.lin@ingics.com --- sound/soc/codecs/wm8903.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h index db94931..0bb4a64 100644 --- a/sound/soc/codecs/wm8903.h +++ b/sound/soc/codecs/wm8903.h @@ -172,7 +172,7 @@ extern int wm8903_mic_detect(struct snd_soc_codec *codec, #define WM8903_VMID_BUF_ENA_WIDTH 1 /* VMID_BUF_ENA */

#define WM8903_VMID_RES_50K 2 -#define WM8903_VMID_RES_250K 3 +#define WM8903_VMID_RES_250K 4 #define WM8903_VMID_RES_5K 6

/*