Rename the tas2781_reset as tasdevice_reset in case of misunderstanding. RESET register for both tas2563 and tas2781 is same and the use of reset pin is also same.

Signed-off-by: Shenghao Ding shenghao-ding@ti.com

--- v1: - Rename tas2781_reset as tasdevice_reset - Changed the copyright year to 2024 in tas2781.h. - Rename TAS2781_REG_SWRESET_XXX as TASDEVICE_REG_SWRESET_XXX - Add tasdevice_reset into tasdevice_i2c_probe. --- include/sound/tas2781.h | 8 ++++---- sound/pci/hda/tas2781_hda_i2c.c | 4 ++-- sound/soc/codecs/tas2781-comlib.c | 8 ++++---- sound/soc/codecs/tas2781-i2c.c | 2 ++ 4 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index cd8ce522b78e..a43ad6dcb7c7 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2563/TAS2781 driver implements a flexible and configurable @@ -43,8 +43,8 @@ (page * 128)) + reg)

/*Software Reset */ -#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01) -#define TAS2781_REG_SWRESET_RESET BIT(0) +#define TASDEVICE_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01) +#define TASDEVICE_REG_SWRESET_RESET BIT(0)

/*I2C Checksum */ #define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) @@ -140,7 +140,7 @@ struct tasdevice_priv { void (*apply_calibration)(struct tasdevice_priv *tas_priv); };

-void tas2781_reset(struct tasdevice_priv *tas_dev); +void tasdevice_reset(struct tasdevice_priv *tas_dev); int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, struct module *module, void (*cont)(const struct firmware *fw, void *context)); diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 75f7674c66ee..10420360b214 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -834,7 +834,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt) pm_runtime_set_active(tas_hda->dev); pm_runtime_enable(tas_hda->dev);

- tas2781_reset(tas_hda->priv); + tasdevice_reset(tas_hda->priv);

ret = component_add(tas_hda->dev, &tas2781_hda_comp_ops); if (ret) { @@ -929,7 +929,7 @@ static int tas2781_system_resume(struct device *dev) tas_hda->priv->tasdevice[i].cur_prog = -1; tas_hda->priv->tasdevice[i].cur_conf = -1; } - tas2781_reset(tas_hda->priv); + tasdevice_reset(tas_hda->priv); tasdevice_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog);

/* If calibrated data occurs error, dsp will still work with default diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 6db1a260da82..1fbf4560f5cc 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -243,7 +243,7 @@ struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c) } EXPORT_SYMBOL_GPL(tasdevice_kzalloc);

-void tas2781_reset(struct tasdevice_priv *tas_dev) +void tasdevice_reset(struct tasdevice_priv *tas_dev) { int ret, i;

@@ -254,8 +254,8 @@ void tas2781_reset(struct tasdevice_priv *tas_dev) } else { for (i = 0; i < tas_dev->ndev; i++) { ret = tasdevice_dev_write(tas_dev, i, - TAS2781_REG_SWRESET, - TAS2781_REG_SWRESET_RESET); + TASDEVICE_REG_SWRESET, + TASDEVICE_REG_SWRESET_RESET); if (ret < 0) dev_err(tas_dev->dev, "dev %d swreset fail, %d\n", @@ -264,7 +264,7 @@ void tas2781_reset(struct tasdevice_priv *tas_dev) } usleep_range(1000, 1050); } -EXPORT_SYMBOL_GPL(tas2781_reset); +EXPORT_SYMBOL_GPL(tasdevice_reset);

int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, struct module *module, diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index b412f8f2e5d5..d5d95ae57c73 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -742,6 +742,8 @@ static int tasdevice_i2c_probe(struct i2c_client *i2c) if (ret) goto err;

+ tasdevice_reset(tas_priv); + ret = devm_snd_soc_register_component(tas_priv->dev, &soc_codec_driver_tasdevice, tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver));