Takashi, here are my modified patches. One small one for alsa-driver. I took your advice and merged the rest into alsa-kernel. Everything should be in order this time.

Add support for Cyrix/NatSemi Geode SC5530 (VSA1)

Signed-off-by Ash Willis ashwillis@programmer.net ---

diff -r fb391138d29c -r 994136cf989e pci/cs5530.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/pci/cs5530.c Thu May 24 20:45:25 2007 +0100 @@ -0,0 +1,2 @@ +#include "../alsa-kernel/pci/cs5530.c" +EXPORT_NO_SYMBOLS;

---

diff -r 45179b325c8e -r 0b0c03c6c6ca Documentation/ALSA-Configuration.txt --- a/Documentation/ALSA-Configuration.txt Wed May 23 16:27:32 2007 +0200 +++ b/Documentation/ALSA-Configuration.txt Thu May 24 20:58:27 2007 +0100 @@ -467,7 +467,12 @@ Prior to version 0.9.0rc4 options had a above explicitly.

The power-management is supported. - + + Module snd-cs5530 + _________________ + + Module for Cyrix/NatSemi Geode 5530 chip. + Module snd-cs5535audio ----------------------

diff -r 45179b325c8e -r 0b0c03c6c6ca include/sb.h --- a/include/sb.h Wed May 23 16:27:32 2007 +0200 +++ b/include/sb.h Thu May 24 20:58:27 2007 +0100 @@ -38,6 +38,7 @@ enum sb_hw_type { SB_HW_ALS100, /* Avance Logic ALS100 chip */ SB_HW_ALS4000, /* Avance Logic ALS4000 chip */ SB_HW_DT019X, /* Diamond Tech. DT-019X / Avance Logic ALS-007 */ + SB_HW_CS5530, /* Cyrix/NatSemi 5530 VSA1 */ };

#define SB_OPEN_PCM 0x01 diff -r 45179b325c8e -r 0b0c03c6c6ca isa/sb/sb16_main.c --- a/isa/sb/sb16_main.c Wed May 23 16:27:32 2007 +0200 +++ b/isa/sb/sb16_main.c Thu May 24 20:58:27 2007 +0100 @@ -563,6 +563,11 @@ static int snd_sb16_playback_open(struct __open_ok: if (chip->hardware == SB_HW_ALS100) runtime->hw.rate_max = 48000; + if (chip->hardware == SB_HW_CS5530) { + runtime->hw.buffer_bytes_max = 32 * 1024; + runtime->hw.periods_min = 2; + runtime->hw.rate_min = 44100; + } if (chip->mode & SB_RATE_LOCK) runtime->hw.rate_min = runtime->hw.rate_max = chip->locked_rate; chip->playback_substream = substream; @@ -633,6 +638,11 @@ static int snd_sb16_capture_open(struct __open_ok: if (chip->hardware == SB_HW_ALS100) runtime->hw.rate_max = 48000; + if (chip->hardware == SB_HW_CS5530) { + runtime->hw.buffer_bytes_max = 32 * 1024; + runtime->hw.periods_min = 2; + runtime->hw.rate_min = 44100; + } if (chip->mode & SB_RATE_LOCK) runtime->hw.rate_min = runtime->hw.rate_max = chip->locked_rate; chip->capture_substream = substream; diff -r 45179b325c8e -r 0b0c03c6c6ca isa/sb/sb_common.c --- a/isa/sb/sb_common.c Wed May 23 16:27:32 2007 +0200 +++ b/isa/sb/sb_common.c Thu May 24 20:58:27 2007 +0100 @@ -128,7 +128,7 @@ static int snd_sbdsp_probe(struct snd_sb minor = version & 0xff; snd_printdd("SB [0x%lx]: DSP chip found, version = %i.%i\n", chip->port, major, minor); - + switch (chip->hardware) { case SB_HW_AUTO: switch (major) { @@ -167,6 +167,9 @@ static int snd_sbdsp_probe(struct snd_sb break; case SB_HW_DT019X: str = "(DT019X/ALS007)"; + break; + case SB_HW_CS5530: + str = "16 (CS5530)"; break; default: return -ENODEV; diff -r 45179b325c8e -r 0b0c03c6c6ca isa/sb/sb_mixer.c --- a/isa/sb/sb_mixer.c Wed May 23 16:27:32 2007 +0200 +++ b/isa/sb/sb_mixer.c Thu May 24 20:58:27 2007 +0100 @@ -821,6 +821,7 @@ int snd_sbmixer_new(struct snd_sb *chip) break; case SB_HW_16: case SB_HW_ALS100: + case SB_HW_CS5530: if ((err = snd_sbmixer_init(chip, snd_sb16_controls, ARRAY_SIZE(snd_sb16_controls), @@ -950,6 +951,7 @@ void snd_sbmixer_suspend(struct snd_sb * break; case SB_HW_16: case SB_HW_ALS100: + case SB_HW_CS5530: save_mixer(chip, sb16_saved_regs, ARRAY_SIZE(sb16_saved_regs)); break; case SB_HW_ALS4000: @@ -975,6 +977,7 @@ void snd_sbmixer_resume(struct snd_sb *c break; case SB_HW_16: case SB_HW_ALS100: + case SB_HW_CS5530: restore_mixer(chip, sb16_saved_regs, ARRAY_SIZE(sb16_saved_regs)); break; case SB_HW_ALS4000: diff -r 45179b325c8e -r 0b0c03c6c6ca pci/Kconfig --- a/pci/Kconfig Wed May 23 16:27:32 2007 +0200 +++ b/pci/Kconfig Thu May 24 20:58:27 2007 +0100 @@ -214,6 +214,16 @@ config SND_CS46XX_NEW_DSP Say Y here to use a new DSP image for SPDIF and dual codecs.

This works better than the old code, so say Y. + +config SND_CS5530 + tristate "CS5530 Audio" + depends on SND + select SND_SB16 + help + Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips. + + To compile this driver as a module, choose M here: the module + will be called snd-cs5530.

config SND_CS5535AUDIO tristate "CS5535/CS5536 Audio" diff -r 45179b325c8e -r 0b0c03c6c6ca pci/Makefile --- a/pci/Makefile Wed May 23 16:27:32 2007 +0200 +++ b/pci/Makefile Thu May 24 20:58:27 2007 +0100 @@ -12,6 +12,7 @@ snd-bt87x-objs := bt87x.o snd-bt87x-objs := bt87x.o snd-cmipci-objs := cmipci.o snd-cs4281-objs := cs4281.o +snd-cs5530-objs := cs5530.o snd-ens1370-objs := ens1370.o snd-ens1371-objs := ens1371.o snd-es1938-objs := es1938.o @@ -36,6 +37,7 @@ obj-$(CONFIG_SND_BT87X) += snd-bt87x.o obj-$(CONFIG_SND_BT87X) += snd-bt87x.o obj-$(CONFIG_SND_CMIPCI) += snd-cmipci.o obj-$(CONFIG_SND_CS4281) += snd-cs4281.o +obj-$(CONFIG_SND_CS5530) += snd-cs5530.o obj-$(CONFIG_SND_ENS1370) += snd-ens1370.o obj-$(CONFIG_SND_ENS1371) += snd-ens1371.o obj-$(CONFIG_SND_ES1938) += snd-es1938.o diff -r 45179b325c8e -r 0b0c03c6c6ca pci/cs5530.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/pci/cs5530.c Thu May 24 20:58:27 2007 +0100 @@ -0,0 +1,306 @@ +/* + * cs5530.c - Initialisation code for Cyrix/NatSemi VSA1 softaudio + * + * (C) Copyright 2007 Ash Willis ashwillis@programmer.net + * (C) Copyright 2003 Red Hat Inc alan@redhat.com + * + * This driver was ported (shamelessly ripped ;) from oss/kahlua.c but I did + * mess with it a bit. The chip seems to have to have trouble with full duplex + * mode. If we're recording in 8bit 8000kHz, say, and we then attempt to + * simultaneously play back audio at 16bit 44100kHz, the device actually plays + * back in the same format in which it is capturing. By forcing the chip to + * always play/capture in 16/44100, we can let alsa-lib convert the samples and + * that way we can hack up some full duplex audio. + * + * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems. + * The older version (VSA1) provides fairly good soundblaster emulation + * although there are a couple of bugs: large DMA buffers break record, + * and the MPU event handling seems suspect. VSA2 allows the native driver + * to control the AC97 audio engine directly and requires a different driver. + * + * Thanks to National Semiconductor for providing the needed information + * on the XpressAudio(tm) internals. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * TO DO: + * Investigate whether we can portably support Cognac (5520) in the + * same manner. + */ + +#include <sound/driver.h> +#include <linux/delay.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <sound/core.h> +#include <sound/sb.h> +#include <sound/initval.h> + +MODULE_AUTHOR("Ash Willis"); +MODULE_DESCRIPTION("CS5530 Audio"); +MODULE_LICENSE("GPL"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + +struct snd_cs5530 { + struct snd_card *card; + struct pci_dev *pci; + struct snd_sb *sb; + unsigned long pci_base; +}; + +static struct pci_device_id snd_cs5530_ids[] = { + {PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID, + PCI_ANY_ID, 0, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, snd_cs5530_ids); + +static int snd_cs5530_free(struct snd_cs5530 *chip) +{ + pci_release_regions(chip->pci); + pci_disable_device(chip->pci); + kfree(chip); + return 0; +} + +static int snd_cs5530_dev_free(struct snd_device *device) +{ + struct snd_cs5530 *chip = device->device_data; + return snd_cs5530_free(chip); +} + +static void __devexit snd_cs5530_remove(struct pci_dev *pci) +{ + snd_card_free(pci_get_drvdata(pci)); + pci_set_drvdata(pci, NULL); +} + +static u8 __devinit snd_cs5530_mixer_read(unsigned long io, u8 reg) +{ + outb(reg, io + 4); + udelay(20); + reg = inb(io + 5); + udelay(20); + return reg; +} + +static int __devinit snd_cs5530_create(struct snd_card *card, + struct pci_dev *pci, + struct snd_cs5530 **rchip) +{ + struct snd_cs5530 *chip; + unsigned long sb_base; + u8 irq, dma8, dma16 = 0; + u16 map; + void __iomem *mem; + int err; + + static struct snd_device_ops ops = { + .dev_free = snd_cs5530_dev_free, + }; + *rchip = NULL; + + err = pci_enable_device(pci); + if (err < 0) + return err; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (chip == NULL) { + pci_disable_device(pci); + return -ENOMEM; + } + + chip->card = card; + chip->pci = pci; + + err = pci_request_regions(pci, "CS5530"); + if (err < 0) { + kfree(chip); + pci_disable_device(pci); + return err; + } + chip->pci_base = pci_resource_start(pci, 0); + + mem = ioremap_nocache(chip->pci_base, pci_resource_len(pci, 0)); + if (mem == NULL) { + kfree(chip); + pci_disable_device(pci); + return -EBUSY; + } + + map = readw(mem + 0x18); + iounmap(mem); + + /* Map bits + 0:1 * 0x20 + 0x200 = sb base + 2 sb enable + 3 adlib enable + 5 MPU enable 0x330 + 6 MPU enable 0x300 + + The other bits may be used internally so must be masked */ + + sb_base = 0x220 + 0x20 * (map & 3); + + if (map & (1<<2)) + printk(KERN_INFO "CS5530: XpressAudio at 0x%lx\n", sb_base); + else { + printk(KERN_ERR "Could not find XpressAudio!\n"); + snd_cs5530_free(chip); + return -ENODEV; + } + + if (map & (1<<5)) + printk(KERN_INFO "CS5530: MPU at 0x300\n"); + else if (map & (1<<6)) + printk(KERN_INFO "CS5530: MPU at 0x330\n"); + + irq = snd_cs5530_mixer_read(sb_base, 0x80) & 0x0F; + dma8 = snd_cs5530_mixer_read(sb_base, 0x81); + + if (dma8 & 0x20) + dma16 = 5; + else if (dma8 & 0x40) + dma16 = 6; + else if (dma8 & 0x80) + dma16 = 7; + else { + printk(KERN_ERR "CS5530: No 16bit DMA enabled\n"); + snd_cs5530_free(chip); + return -ENODEV; + } + + if (dma8 & 0x01) + dma8 = 0; + else if (dma8 & 02) + dma8 = 1; + else if (dma8 & 0x08) + dma8 = 3; + else { + printk(KERN_ERR "CS5530: No 8bit DMA enabled\n"); + snd_cs5530_free(chip); + return -ENODEV; + } + + if (irq & 1) + irq = 9; + else if (irq & 2) + irq = 5; + else if (irq & 4) + irq = 7; + else if (irq & 8) + irq = 10; + else { + printk(KERN_ERR "CS5530: SoundBlaster IRQ not set\n"); + snd_cs5530_free(chip); + return -ENODEV; + } + + printk(KERN_INFO "CS5530: IRQ: %d DMA8: %d DMA16: %d\n", irq, dma8, + dma16); + + err = snd_sbdsp_create(card, sb_base, irq, snd_sb16dsp_interrupt, dma8, + dma16, SB_HW_CS5530, &chip->sb); + if (err < 0) { + printk(KERN_ERR "CS5530: Could not create SoundBlaster\n"); + snd_cs5530_free(chip); + return err; + } + + err = snd_sb16dsp_pcm(chip->sb, 0, &chip->sb->pcm); + if (err < 0) { + printk(KERN_ERR "CS5530: Could not create PCM\n"); + snd_cs5530_free(chip); + return err; + } + + err = snd_sbmixer_new(chip->sb); + if (err < 0) { + printk(KERN_ERR "CS5530: Could not create Mixer\n"); + snd_cs5530_free(chip); + return err; + } + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) { + snd_cs5530_free(chip); + return err; + } + + snd_card_set_dev(card, &pci->dev); + *rchip = chip; + return 0; +} + +static int __devinit snd_cs5530_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id) +{ + static int dev; + struct snd_card *card; + struct snd_cs5530 *chip = NULL; + int err; + + if (dev >= SNDRV_CARDS) + return -ENODEV; + if (!enable[dev]) { + dev++; + return -ENOENT; + } + + card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); + + if (card == NULL) + return -ENOMEM; + + err = snd_cs5530_create(card, pci, &chip); + if (err < 0) { + snd_card_free(card); + return err; + } + + strcpy(card->driver, "CS5530"); + strcpy(card->shortname, "CS5530 Audio"); + sprintf(card->longname, "%s at 0x%lx", card->shortname, chip->pci_base); + + err = snd_card_register(card); + if (err < 0) { + snd_card_free(card); + return err; + } + pci_set_drvdata(pci, card); + dev++; + return 0; +} + +static struct pci_driver driver = { + .name = "CS5530_Audio", + .id_table = snd_cs5530_ids, + .probe = snd_cs5530_probe, + .remove = __devexit_p(snd_cs5530_remove), +}; + +static int __init alsa_card_cs5530_init(void) +{ + return pci_register_driver(&driver); +} + +static void __exit alsa_card_cs5530_exit(void) +{ + pci_unregister_driver(&driver); +} + +module_init(alsa_card_cs5530_init) +module_exit(alsa_card_cs5530_exit) +

=