[alsa-devel] [PATCH] ASoC: imx-spdif: Use snd-soc-dummy CODEC driver to link card
This is a quick fix for the below two issues when building spdif as modules.
1) If modprobing modules in order: (Step 1) snd-soc-fsl-spdif -> (Step 2) snd-soc-imx-spdif -> (Step 3) snd-soc-spdif-tx/rx, we will fail to create imx-spdif card and dai link unless we rmmod snd-soc-imx-spdif and modprobe it again due to the execution platform_driver_unregister() in probe() when meeting -EPROBE_DEFER at Step 2.
2) After "imx-spdif sound-spdif.17: dit-hifi <-> 2004000.spdif mapping ok", 'rmmod snd-soc-imx-spdif' would cause kernel dump with warning: WARNING: CPU: 0 PID: 1301 at /home/rmk/git/linux-rmk/fs/sysfs/dir.c:915 sysfs_hash_and_remove+0x84/0x90() sysfs: can not remove 'dapm_widget', no directory This should be caused by disordered resourse releasing of the whole link. And trying to unregister the card and then CODEC dev can't fix this issue.
Thus this patch just provides a simple fix to these two bugs by using the snd-soc-dummy in the core instead of seperate snd-soc-spdif-tx/rx so that there's no need to handle the registering and unregistering of CODEC or CODEC dai any more.
Signed-off-by: Nicolin Chen Guangyu.Chen@freescale.com --- sound/soc/fsl/Kconfig | 1 - sound/soc/fsl/imx-spdif.c | 84 ++++++++++++----------------------------------- 2 files changed, 21 insertions(+), 64 deletions(-)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index bb4ab96..1c7b3b7 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -201,7 +201,6 @@ config SND_SOC_IMX_SPDIF tristate "SoC Audio support for i.MX boards with S/PDIF" select SND_SOC_IMX_PCM_DMA select SND_SOC_FSL_SPDIF - select SND_SOC_SPDIF select REGMAP_MMIO help SoC Audio support for i.MX boards with S/PDIF diff --git a/sound/soc/fsl/imx-spdif.c b/sound/soc/fsl/imx-spdif.c index 980dd1f..e1dc401 100644 --- a/sound/soc/fsl/imx-spdif.c +++ b/sound/soc/fsl/imx-spdif.c @@ -14,17 +14,15 @@ #include <sound/soc.h>
struct imx_spdif_data { - struct snd_soc_dai_link dai[2]; + struct snd_soc_dai_link dai; struct snd_soc_card card; - struct platform_device *txdev; - struct platform_device *rxdev; };
static int imx_spdif_audio_probe(struct platform_device *pdev) { struct device_node *spdif_np, *np = pdev->dev.of_node; struct imx_spdif_data *data; - int ret = 0, num_links = 0; + int ret = 0;
spdif_np = of_parse_phandle(np, "spdif-controller", 0); if (!spdif_np) { @@ -39,69 +37,42 @@ static int imx_spdif_audio_probe(struct platform_device *pdev) goto end; }
- if (of_property_read_bool(np, "spdif-out")) { - data->dai[num_links].name = "S/PDIF TX"; - data->dai[num_links].stream_name = "S/PDIF PCM Playback"; - data->dai[num_links].codec_dai_name = "dit-hifi"; - data->dai[num_links].codec_name = "spdif-dit"; - data->dai[num_links].cpu_of_node = spdif_np; - data->dai[num_links].platform_of_node = spdif_np; - num_links++; - - data->txdev = platform_device_register_simple("spdif-dit", -1, NULL, 0); - if (IS_ERR(data->txdev)) { - ret = PTR_ERR(data->txdev); - dev_err(&pdev->dev, "register dit failed: %d\n", ret); - goto end; - } - } + data->dai.name = "S/PDIF PCM"; + data->dai.stream_name = "S/PDIF PCM"; + data->dai.codec_dai_name = "snd-soc-dummy-dai"; + data->dai.codec_name = "snd-soc-dummy"; + data->dai.cpu_of_node = spdif_np; + data->dai.platform_of_node = spdif_np; + data->dai.playback_only = true; + data->dai.capture_only = true;
- if (of_property_read_bool(np, "spdif-in")) { - data->dai[num_links].name = "S/PDIF RX"; - data->dai[num_links].stream_name = "S/PDIF PCM Capture"; - data->dai[num_links].codec_dai_name = "dir-hifi"; - data->dai[num_links].codec_name = "spdif-dir"; - data->dai[num_links].cpu_of_node = spdif_np; - data->dai[num_links].platform_of_node = spdif_np; - num_links++; - - data->rxdev = platform_device_register_simple("spdif-dir", -1, NULL, 0); - if (IS_ERR(data->rxdev)) { - ret = PTR_ERR(data->rxdev); - dev_err(&pdev->dev, "register dir failed: %d\n", ret); - goto error_dit; - } - } + if (of_property_read_bool(np, "spdif-out")) + data->dai.capture_only = false; + + if (of_property_read_bool(np, "spdif-in")) + data->dai.playback_only = false;
- if (!num_links) { + if (data->dai.playback_only && data->dai.capture_only) { dev_err(&pdev->dev, "no enabled S/PDIF DAI link\n"); - goto error_dir; + goto end; }
data->card.dev = &pdev->dev; - data->card.num_links = num_links; - data->card.dai_link = data->dai; + data->card.dai_link = &data->dai; + data->card.num_links = 1;
ret = snd_soc_of_parse_card_name(&data->card, "model"); if (ret) - goto error_dir; + goto end;
ret = devm_snd_soc_register_card(&pdev->dev, &data->card); if (ret) { dev_err(&pdev->dev, "snd_soc_register_card failed: %d\n", ret); - goto error_dir; + goto end; }
platform_set_drvdata(pdev, data);
- goto end; - -error_dir: - if (data->rxdev) - platform_device_unregister(data->rxdev); -error_dit: - if (data->txdev) - platform_device_unregister(data->txdev); end: if (spdif_np) of_node_put(spdif_np); @@ -109,18 +80,6 @@ end: return ret; }
-static int imx_spdif_audio_remove(struct platform_device *pdev) -{ - struct imx_spdif_data *data = platform_get_drvdata(pdev); - - if (data->rxdev) - platform_device_unregister(data->rxdev); - if (data->txdev) - platform_device_unregister(data->txdev); - - return 0; -} - static const struct of_device_id imx_spdif_dt_ids[] = { { .compatible = "fsl,imx-audio-spdif", }, { /* sentinel */ } @@ -134,7 +93,6 @@ static struct platform_driver imx_spdif_driver = { .of_match_table = imx_spdif_dt_ids, }, .probe = imx_spdif_audio_probe, - .remove = imx_spdif_audio_remove, };
module_platform_driver(imx_spdif_driver);
On Mon, Dec 23, 2013 at 05:28:53PM +0800, Nicolin Chen wrote:
This is a quick fix for the below two issues when building spdif as modules.
Good thinking - this is a smart way of dealing with the issue. It'll mean that we don't have the application specific constraints but those could be added back in the driver later or we could do an explicit S/PDIF CODEC in the same style as dummy. Applied, thanks.
On Tue, Dec 31, 2013 at 04:34:22PM +0000, Mark Brown wrote:
On Mon, Dec 23, 2013 at 05:28:53PM +0800, Nicolin Chen wrote:
This is a quick fix for the below two issues when building spdif as modules.
Good thinking - this is a smart way of dealing with the issue. It'll mean that we don't have the application specific constraints but those could be added back in the driver later or we could do an explicit S/PDIF CODEC in the same style as dummy. Applied, thanks.
Yes, it can circumvent all the unnecessary problems we've been through here even though the CODEC name 'dummy' doesn't look so flawless. The application constraints, what I understand should be the supporting formats and rates, have been already ensured in the CPU DAI driver, so we might not need to worry for the CODEC one.
Thank you for the suggestion of dummy driver at the first place and.. Happy new year :) Nicolin Chen
participants (2)
-
Mark Brown
-
Nicolin Chen