[alsa-devel] [PATCH v4 0/5] Add support for Legacy HDMI audio drivers
Legacy (CherryTrail/ Baytrail) HDMI audio drivers added Legacy hdmi audio-Gfx interaction/ interfacing is updated to use irq chip framework
This patch series has only been tested on hardware with a single HDMI connector/pipe and additional work may be needed for newer machines with 2 connectors
Jerome Anand (5): drm/i915: setup bridge for HDMI LPE audio driver drm/i915: Add support for audio driver notifications ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T ALSA: x86: hdmi: Add audio support for BYT and CHT ALSA: x86: hdmi: continue playback even when display resolution changes
Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 8 +- drivers/gpu/drm/i915/i915_drv.h | 17 + drivers/gpu/drm/i915/i915_irq.c | 16 + drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 8 + drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 388 +++++++ include/drm/intel_lpe_audio.h | 46 + sound/Kconfig | 2 + sound/Makefile | 2 +- sound/x86/Kconfig | 15 + sound/x86/Makefile | 6 + sound/x86/intel_hdmi_audio.c | 1870 ++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_audio.h | 197 ++++ sound/x86/intel_hdmi_audio_if.c | 551 ++++++++++ sound/x86/intel_hdmi_lpe_audio.c | 617 +++++++++++ sound/x86/intel_hdmi_lpe_audio.h | 683 ++++++++++++ 19 files changed, 4439 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.h create mode 100644 sound/x86/Kconfig create mode 100644 sound/x86/Makefile create mode 100644 sound/x86/intel_hdmi_audio.c create mode 100644 sound/x86/intel_hdmi_audio.h create mode 100644 sound/x86/intel_hdmi_audio_if.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.h
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during i915_driver_load: 1. Create a platform device to share MMIO/IRQ resources 2. Make the platform device child of i915 device for runtime PM. 3. Create IRQ chip to forward HDMI LPE audio irqs.
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Jerome Anand jerome.anand@intel.com --- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 8 +- drivers/gpu/drm/i915/i915_drv.h | 15 ++ drivers/gpu/drm/i915/i915_irq.c | 16 ++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_lpe_audio.c | 339 +++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 46 +++++ 8 files changed, 437 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.h
diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 104296d..bd9b767 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -225,6 +225,15 @@ Display PLLs .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h :internal:
+intel hdmi lpe audio support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: + Memory Management and Command Submission ========================================
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 5196509..2bca239 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -127,6 +127,9 @@ i915-y += intel_gvt.o include $(src)/gvt/Makefile endif
+# LPE Audio for VLV and CHT +i915-y += intel_lpe_audio.o + obj-$(CONFIG_DRM_I915) += i915.o
CFLAGS_i915_trace_points.o := -I$(src) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 4d22b4b..70d728b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1131,7 +1131,8 @@ static void i915_driver_register(struct drm_i915_private *dev_priv) if (IS_GEN5(dev_priv)) intel_gpu_ips_init(dev_priv);
- i915_audio_component_init(dev_priv); + if (intel_lpe_audio_init(dev_priv) < 0) + i915_audio_component_init(dev_priv);
/* * Some ports require correctly set-up hpd registers for detection to @@ -1149,7 +1150,10 @@ static void i915_driver_register(struct drm_i915_private *dev_priv) */ static void i915_driver_unregister(struct drm_i915_private *dev_priv) { - i915_audio_component_cleanup(dev_priv); + if (HAS_LPE_AUDIO(dev_priv)) + intel_lpe_audio_teardown(dev_priv); + else + i915_audio_component_cleanup(dev_priv);
intel_gpu_ips_teardown(); acpi_video_unregister(); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f66eeede..cc7033a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2449,6 +2449,12 @@ struct drm_i915_private { /* Used to save the pipe-to-encoder mapping for audio */ struct intel_encoder *av_enc_map[I915_MAX_PIPES];
+ /* necessary resource sharing with HDMI LPE audio driver. */ + struct { + struct platform_device *platdev; + int irq; + } lpe_audio; + /* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch * will be rejected. Instead look for a better place. @@ -2848,6 +2854,8 @@ intel_info(const struct drm_i915_private *dev_priv)
#define HAS_POOLED_EU(dev_priv) ((dev_priv)->info.has_pooled_eu)
+#define HAS_LPE_AUDIO(dev_priv) ((dev_priv)->lpe_audio.platdev != NULL) + #define INTEL_PCH_DEVICE_ID_MASK 0xff00 #define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00 #define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00 @@ -3609,6 +3617,13 @@ extern int i915_restore_state(struct drm_i915_private *dev_priv); void i915_setup_sysfs(struct drm_i915_private *dev_priv); void i915_teardown_sysfs(struct drm_i915_private *dev_priv);
+/* i915_lpe_audio.c */ +int intel_lpe_audio_init(struct drm_i915_private *dev_priv); +int intel_lpe_audio_setup(struct drm_i915_private *dev_priv); +void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); +void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); +bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv); + /* intel_i2c.c */ extern int intel_setup_gmbus(struct drm_i915_private *dev_priv); extern void intel_teardown_gmbus(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index a0e70f5..d9393d6a 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1893,6 +1893,10 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg) * signalled in iir */ valleyview_pipestat_irq_ack(dev_priv, iir, pipe_stats);
+ if (iir & (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT)) + intel_lpe_audio_irq_handler(dev_priv); + /* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. @@ -1973,6 +1977,11 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg) * signalled in iir */ valleyview_pipestat_irq_ack(dev_priv, iir, pipe_stats);
+ if (iir & (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT | + I915_LPE_PIPE_C_INTERRUPT)) + intel_lpe_audio_irq_handler(dev_priv); + /* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. @@ -2914,6 +2923,7 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) u32 pipestat_mask; u32 enable_mask; enum pipe pipe; + u32 val;
pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV | PIPE_CRC_DONE_INTERRUPT_STATUS; @@ -2930,6 +2940,12 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)
WARN_ON(dev_priv->irq_mask != ~0);
+ val = (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT | + I915_LPE_PIPE_C_INTERRUPT); + + enable_mask |= val; + dev_priv->irq_mask = ~enable_mask;
GEN5_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 00970aa..643bc6e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2428,6 +2428,9 @@ enum skl_disp_power_wells { #define I915_ASLE_INTERRUPT (1<<0) #define I915_BSD_USER_INTERRUPT (1<<25)
+#define I915_HDMI_LPE_AUDIO_BASE (VLV_DISPLAY_BASE + 0x65000) +#define I915_HDMI_LPE_AUDIO_SIZE 0x1000 + #define GEN6_BSD_RNCID _MMIO(0x12198)
#define GEN7_FF_THREAD_MODE _MMIO(0x20a0) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c new file mode 100644 index 0000000..099732c --- /dev/null +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -0,0 +1,339 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com + * Jerome Anand jerome.anand@intel.com + * based on VED patches + * + */ + +/** + * DOC: LPE Audio integration for HDMI or DP playback + * + * Motivation: + * Atom platforms (e.g. valleyview and cherryTrail) integrates a DMA-based + * interface as an alternative to the traditional HDaudio path. While this + * mode is unrelated to the LPE aka SST audio engine, the documentation refers + * to this mode as LPE so we keep this notation for the sake of consistency. + * + * The interface is handled by a separate standalone driver maintained in the + * ALSA subsystem for simplicity. To minimize the interaction between the two + * subsystems, a bridge is setup between the hdmi-lpe-audio and i915: + * 1. Create a platform device to share MMIO/IRQ resources + * 2. Make the platform device child of i915 device for runtime PM. + * 3. Create IRQ chip to forward the LPE audio irqs. + * the hdmi-lpe-audio driver probes the lpe audio device and creates a new + * sound card + * + * Threats: + * Due to the restriction in Linux platform device model, user need manually + * uninstall the hdmi-lpe-audio driver before uninstalling i915 module, + * otherwise we might run into use-after-free issues after i915 removes the + * platform device: even though hdmi-lpe-audio driver is released, the modules + * is still in "installed" status. + * + * Implementation: + * The MMIO/REG platform resources are created according to the registers + * specification. + * When forwarding LPE audio irqs, the flow control handler selection depends + * on the platform, for example on valleyview handle_simple_irq is enough. + * + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/pci.h> + +#include "i915_drv.h" +#include <linux/delay.h> +#include <drm/intel_lpe_audio.h> + +static struct platform_device * +lpe_audio_platdev_create(struct drm_i915_private *dev_priv) +{ + int ret; + struct drm_device *dev = &dev_priv->drm; + struct platform_device_info pinfo = {}; + struct resource *rsc; + struct platform_device *platdev; + struct intel_hdmi_lpe_audio_pdata *pdata; + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + rsc = kcalloc(2, sizeof(*rsc), GFP_KERNEL); + if (!rsc) { + kfree(pdata); + return ERR_PTR(-ENOMEM); + } + + rsc[0].start = rsc[0].end = dev_priv->lpe_audio.irq; + rsc[0].flags = IORESOURCE_IRQ; + rsc[0].name = "hdmi-lpe-audio-irq"; + + rsc[1].start = pci_resource_start(dev->pdev, 0) + + I915_HDMI_LPE_AUDIO_BASE; + rsc[1].end = pci_resource_start(dev->pdev, 0) + + I915_HDMI_LPE_AUDIO_BASE + I915_HDMI_LPE_AUDIO_SIZE - 1; + rsc[1].flags = IORESOURCE_MEM; + rsc[1].name = "hdmi-lpe-audio-mmio"; + + pinfo.parent = dev->dev; + pinfo.name = "hdmi-lpe-audio"; + pinfo.id = -1; + pinfo.res = rsc; + pinfo.num_res = 2; + pinfo.data = pdata; + pinfo.size_data = sizeof(*pdata); + pinfo.dma_mask = DMA_BIT_MASK(32); + + spin_lock_init(&pdata->lpe_audio_slock); + + platdev = platform_device_register_full(&pinfo); + if (IS_ERR(platdev)) { + ret = PTR_ERR(platdev); + DRM_ERROR("Failed to allocate LPE audio platform device\n"); + goto err; + } + + kfree(rsc); + + return platdev; + +err: + kfree(rsc); + kfree(pdata); + return ERR_PTR(ret); +} + +static void lpe_audio_platdev_destroy(struct drm_i915_private *dev_priv) +{ + platform_device_unregister(dev_priv->lpe_audio.platdev); + kfree(dev_priv->lpe_audio.platdev->dev.dma_mask); +} + +static void lpe_audio_irq_unmask(struct irq_data *d) +{ + struct drm_i915_private *dev_priv = d->chip_data; + unsigned long irqflags; + u32 val = (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT); + + if (IS_CHERRYVIEW(dev_priv)) + val |= I915_LPE_PIPE_C_INTERRUPT; + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + + dev_priv->irq_mask &= ~val; + I915_WRITE(VLV_IIR, val); + I915_WRITE(VLV_IIR, val); + I915_WRITE(VLV_IMR, dev_priv->irq_mask); + POSTING_READ(VLV_IMR); + + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); +} + +static void lpe_audio_irq_mask(struct irq_data *d) +{ + struct drm_i915_private *dev_priv = d->chip_data; + unsigned long irqflags; + u32 val = (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT); + + if (IS_CHERRYVIEW(dev_priv)) + val |= I915_LPE_PIPE_C_INTERRUPT; + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + + dev_priv->irq_mask |= val; + I915_WRITE(VLV_IMR, dev_priv->irq_mask); + I915_WRITE(VLV_IIR, val); + I915_WRITE(VLV_IIR, val); + POSTING_READ(VLV_IIR); + + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); +} + +static struct irq_chip lpe_audio_irqchip = { + .name = "hdmi_lpe_audio_irqchip", + .irq_mask = lpe_audio_irq_mask, + .irq_unmask = lpe_audio_irq_unmask, +}; + +static int lpe_audio_irq_init(struct drm_i915_private *dev_priv) +{ + int irq = dev_priv->lpe_audio.irq; + + WARN_ON(!intel_irqs_enabled(dev_priv)); + irq_set_chip_and_handler_name(irq, + &lpe_audio_irqchip, + handle_simple_irq, + "hdmi_lpe_audio_irq_handler"); + + return irq_set_chip_data(irq, dev_priv); +} + +/** + * intel_lpe_audio_irq_handler() - forwards the LPE audio irq + * @dev_priv: the i915 drm device private data + * + * the LPE Audio irq is forwarded to the irq handler registered by LPE audio + * driver. + */ +void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv) +{ + int ret; + + if (!HAS_LPE_AUDIO(dev_priv)) + return; + + ret = generic_handle_irq(dev_priv->lpe_audio.irq); + if (ret) + DRM_ERROR_RATELIMITED("error handling LPE audio irq: %d\n", + ret); +} + +/** + * intel_lpe_audio_detect() - check & setup lpe audio if present + * @dev_priv: the i915 drm device private data + * + * Detect if lpe audio is present + * + * Return: true if lpe audio present else Return = false + */ +bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv) +{ + int lpe_present = false; + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + static const struct pci_device_id atom_hdaudio_ids[] = { + /* Baytrail */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0f04)}, + /* Braswell */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2284)}, + {} + }; + + if (!pci_dev_present(atom_hdaudio_ids)) { + DRM_INFO("%s\n", "HDaudio controller not detected, using LPE audio instead\n"); + lpe_present = true; + } + } + return lpe_present; +} + +/** + * intel_lpe_audio_setup() - setup the bridge between HDMI LPE Audio + * driver and i915 + * @dev_priv: the i915 drm device private data + * + * set up the minimum required resources for the bridge: irq chip, + * platform resource and platform device. i915 device is set as parent + * of the new platform device. + * + * Return: 0 if successful. non-zero if allocation/initialization fails + */ +int intel_lpe_audio_setup(struct drm_i915_private *dev_priv) +{ + int ret; + + dev_priv->lpe_audio.irq = irq_alloc_desc(0); + if (dev_priv->lpe_audio.irq < 0) { + DRM_ERROR("Failed to allocate IRQ desc: %d\n", + dev_priv->lpe_audio.irq); + ret = dev_priv->lpe_audio.irq; + goto err; + } + + DRM_DEBUG("irq = %d\n", dev_priv->lpe_audio.irq); + + ret = lpe_audio_irq_init(dev_priv); + + if (ret) { + DRM_ERROR("Failed to initialize irqchip for lpe audio: %d\n", + ret); + goto err_free_irq; + } + + dev_priv->lpe_audio.platdev = lpe_audio_platdev_create(dev_priv); + + if (IS_ERR(dev_priv->lpe_audio.platdev)) { + ret = PTR_ERR(dev_priv->lpe_audio.platdev); + DRM_ERROR("Failed to create lpe audio platform device: %d\n", + ret); + goto err_free_irq; + } + + return 0; +err_free_irq: + irq_free_desc(dev_priv->lpe_audio.irq); +err: + dev_priv->lpe_audio.irq = -1; + dev_priv->lpe_audio.platdev = NULL; + return ret; +} + + +/** + * intel_lpe_audio_init() - detect and setup the bridge between HDMI LPE Audio + * driver and i915 + * @dev_priv: the i915 drm device private data + * + * Return: 0 if successful. non-zero if detection or + * llocation/initialization fails + */ +int intel_lpe_audio_init(struct drm_i915_private *dev_priv) +{ + int ret = -ENODEV; + + if (intel_lpe_audio_detect(dev_priv)) { + ret = intel_lpe_audio_setup(dev_priv); + if (ret < 0) + DRM_ERROR("failed to setup LPE Audio bridge\n"); + } + return ret; +} + +/** + * intel_lpe_audio_teardown() - destroy the bridge between HDMI LPE + * audio driver and i915 + * @dev_priv: the i915 drm device private data + * + * release all the resources for LPE audio <-> i915 bridge. + */ +void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) +{ + struct irq_desc *desc; + + if (!HAS_LPE_AUDIO(dev_priv)) + return; + + desc = irq_to_desc(dev_priv->lpe_audio.irq); + + lpe_audio_irq_mask(&desc->irq_data); + + lpe_audio_platdev_destroy(dev_priv); + + irq_free_desc(dev_priv->lpe_audio.irq); +} diff --git a/include/drm/intel_lpe_audio.h b/include/drm/intel_lpe_audio.h new file mode 100644 index 0000000..952de05 --- /dev/null +++ b/include/drm/intel_lpe_audio.h @@ -0,0 +1,46 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef _INTEL_LPE_AUDIO_H_ +#define _INTEL_LPE_AUDIO_H_ + +#include <linux/types.h> +#include <linux/spinlock_types.h> + +#define HDMI_MAX_ELD_BYTES 128 + +struct intel_hdmi_lpe_audio_eld { + int port_id; + unsigned char eld_data[HDMI_MAX_ELD_BYTES]; +}; + +struct intel_hdmi_lpe_audio_pdata { + bool notify_pending; + int tmds_clock_speed; + bool hdmi_connected; + struct intel_hdmi_lpe_audio_eld eld; + void (*notify_audio_lpe)(void *audio_ptr); + spinlock_t lpe_audio_slock; +}; + +#endif /* _I915_LPE_AUDIO_H_ */
On Sat, 21 Jan 2017, Jerome Anand jerome.anand@intel.com wrote:
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during i915_driver_load:
- Create a platform device to share MMIO/IRQ resources
- Make the platform device child of i915 device for runtime PM.
- Create IRQ chip to forward HDMI LPE audio irqs.
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Jerome Anand jerome.anand@intel.com
Some comments inline. This is not a detailed technical review, more a high level glance at interfacing with the rest of i915.
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 4d22b4b..70d728b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1131,7 +1131,8 @@ static void i915_driver_register(struct drm_i915_private *dev_priv) if (IS_GEN5(dev_priv)) intel_gpu_ips_init(dev_priv);
- i915_audio_component_init(dev_priv);
- if (intel_lpe_audio_init(dev_priv) < 0)
i915_audio_component_init(dev_priv);
I'd like this abstracted behind a single intel_audio_init() in intel_audio.c, which would do the right thing.
/* * Some ports require correctly set-up hpd registers for detection to @@ -1149,7 +1150,10 @@ static void i915_driver_register(struct drm_i915_private *dev_priv) */ static void i915_driver_unregister(struct drm_i915_private *dev_priv) {
- i915_audio_component_cleanup(dev_priv);
- if (HAS_LPE_AUDIO(dev_priv))
intel_lpe_audio_teardown(dev_priv);
- else
i915_audio_component_cleanup(dev_priv);
Same here for cleanup.
intel_gpu_ips_teardown(); acpi_video_unregister(); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f66eeede..cc7033a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2449,6 +2449,12 @@ struct drm_i915_private { /* Used to save the pipe-to-encoder mapping for audio */ struct intel_encoder *av_enc_map[I915_MAX_PIPES];
- /* necessary resource sharing with HDMI LPE audio driver. */
- struct {
struct platform_device *platdev;
int irq;
- } lpe_audio;
I think the av_enc_map array is misplaced within dev_priv, and these should really be closer to the audio_component etc. members. But could be cleaned up later too.
/* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch * will be rejected. Instead look for a better place. @@ -2848,6 +2854,8 @@ intel_info(const struct drm_i915_private *dev_priv)
#define HAS_POOLED_EU(dev_priv) ((dev_priv)->info.has_pooled_eu)
+#define HAS_LPE_AUDIO(dev_priv) ((dev_priv)->lpe_audio.platdev != NULL)
Please note that *all* of our HAS_ macros check for static features of the hardware, not dynamic state of the driver. Let's keep it that way.
If you abstract the init/cleanup in intel_audio.c like I suggested, I think you can just check for dev_priv->lpe_audio.platdev directly, and get rid of HAS_LPE_AUDIO() altogether. Then it'll all be within intel_audio.c or intel_lpe_audio.c, and it's pretty obvious what it means.
+/**
- intel_lpe_audio_detect() - check & setup lpe audio if present
- @dev_priv: the i915 drm device private data
- Detect if lpe audio is present
- Return: true if lpe audio present else Return = false
- */
+bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv)
Could this not be static?
+/**
- intel_lpe_audio_setup() - setup the bridge between HDMI LPE Audio
- driver and i915
- @dev_priv: the i915 drm device private data
- set up the minimum required resources for the bridge: irq chip,
- platform resource and platform device. i915 device is set as parent
- of the new platform device.
- Return: 0 if successful. non-zero if allocation/initialization fails
- */
+int intel_lpe_audio_setup(struct drm_i915_private *dev_priv)
Could this not be static?
BR, Jani.
-----Original Message----- From: Jani Nikula [mailto:jani.nikula@linux.intel.com] Sent: Monday, January 23, 2017 4:24 PM To: Anand, Jerome jerome.anand@intel.com; intel- gfx@lists.freedesktop.org; alsa-devel@alsa-project.org Cc: tiwai@suse.de; broonie@kernel.org; Ughreja, Rakesh A rakesh.a.ughreja@intel.com Subject: Re: [Intel-gfx] [PATCH v4 1/5] drm/i915: setup bridge for HDMI LPE audio driver
On Sat, 21 Jan 2017, Jerome Anand jerome.anand@intel.com wrote:
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during i915_driver_load:
- Create a platform device to share MMIO/IRQ resources 2. Make the
platform device child of i915 device for runtime PM. 3. Create IRQ chip to forward HDMI LPE audio irqs.
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Jerome Anand jerome.anand@intel.com
Some comments inline. This is not a detailed technical review, more a high level glance at interfacing with the rest of i915.
Sure - thanks for the quick review Jani
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 4d22b4b..70d728b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1131,7 +1131,8 @@ static void i915_driver_register(struct
drm_i915_private *dev_priv)
if (IS_GEN5(dev_priv)) intel_gpu_ips_init(dev_priv);
- i915_audio_component_init(dev_priv);
- if (intel_lpe_audio_init(dev_priv) < 0)
i915_audio_component_init(dev_priv);
I'd like this abstracted behind a single intel_audio_init() in intel_audio.c, which would do the right thing.
Ok - I'll create two new API's in intel_audio.c
/* * Some ports require correctly set-up hpd registers for detection to @@ -1149,7 +1150,10 @@ static void i915_driver_register(struct
drm_i915_private *dev_priv)
*/ static void i915_driver_unregister(struct drm_i915_private *dev_priv) {
- i915_audio_component_cleanup(dev_priv);
- if (HAS_LPE_AUDIO(dev_priv))
intel_lpe_audio_teardown(dev_priv);
- else
i915_audio_component_cleanup(dev_priv);
Same here for cleanup.
OK
intel_gpu_ips_teardown(); acpi_video_unregister(); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f66eeede..cc7033a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2449,6 +2449,12 @@ struct drm_i915_private { /* Used to save the pipe-to-encoder mapping for audio */ struct intel_encoder *av_enc_map[I915_MAX_PIPES];
- /* necessary resource sharing with HDMI LPE audio driver. */
- struct {
struct platform_device *platdev;
int irq;
- } lpe_audio;
I think the av_enc_map array is misplaced within dev_priv, and these should really be closer to the audio_component etc. members. But could be cleaned up later too.
Will cleanup later.
/* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your
patch
* will be rejected. Instead look for a better place.
@@ -2848,6 +2854,8 @@ intel_info(const struct drm_i915_private *dev_priv)
#define HAS_POOLED_EU(dev_priv) ((dev_priv)->info.has_pooled_eu)
+#define HAS_LPE_AUDIO(dev_priv) ((dev_priv)->lpe_audio.platdev != +NULL)
Please note that *all* of our HAS_ macros check for static features of the hardware, not dynamic state of the driver. Let's keep it that way.
OK - will remove it from here.
If you abstract the init/cleanup in intel_audio.c like I suggested, I think you can just check for dev_priv->lpe_audio.platdev directly, and get rid of HAS_LPE_AUDIO() altogether. Then it'll all be within intel_audio.c or intel_lpe_audio.c, and it's pretty obvious what it means.
OK
+/**
- intel_lpe_audio_detect() - check & setup lpe audio if present
- @dev_priv: the i915 drm device private data
- Detect if lpe audio is present
- Return: true if lpe audio present else Return = false */ bool
+intel_lpe_audio_detect(struct drm_i915_private *dev_priv)
Could this not be static?
OK - wanted it to be as part of the interface. Not used anywhere now, so will make it static
+/**
- intel_lpe_audio_setup() - setup the bridge between HDMI LPE Audio
- driver and i915
- @dev_priv: the i915 drm device private data
- set up the minimum required resources for the bridge: irq chip,
- platform resource and platform device. i915 device is set as
+parent
- of the new platform device.
- Return: 0 if successful. non-zero if allocation/initialization
+fails */ int intel_lpe_audio_setup(struct drm_i915_private +*dev_priv)
Could this not be static?
OK
BR, Jani.
-- Jani Nikula, Intel Open Source Technology Center
Notifiations like mode change, hot plug and edid to the audio driver are added. This is inturn used by the audio driver for its functionality.
A new interface file capturing the notifications needed by the audio driver is added
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Jerome Anand jerome.anand@intel.com --- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/intel_audio.c | 8 ++++++ drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 49 ++++++++++++++++++++++++++++++++++ 4 files changed, 60 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index cc7033a..601c8ad 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3623,6 +3623,8 @@ int intel_lpe_audio_setup(struct drm_i915_private *dev_priv); void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv); +void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, + void *eld, int port, int tmds_clk_speed);
/* intel_i2c.c */ extern int intel_setup_gmbus(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 16c2027..00a485e 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -24,6 +24,7 @@ #include <linux/kernel.h> #include <linux/component.h> #include <drm/i915_component.h> +#include <drm/intel_lpe_audio.h> #include "intel_drv.h"
#include <drm/drmP.h> @@ -630,6 +631,10 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder, if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port, (int) pipe); + + if (HAS_LPE_AUDIO(dev_priv)) + intel_lpe_audio_notify(dev_priv, connector->eld, port, + crtc_state->port_clock); }
/** @@ -663,6 +668,9 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder) if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port, (int) pipe); + + if (HAS_LPE_AUDIO(dev_priv)) + intel_lpe_audio_notify(dev_priv, NULL, port, 0); }
/** diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 0bcfead..377584e1 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -36,6 +36,7 @@ #include <drm/drm_edid.h> #include "intel_drv.h" #include <drm/i915_drm.h> +#include <drm/intel_lpe_audio.h> #include "i915_drv.h"
static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 099732c..293084d 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -337,3 +337,52 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv)
irq_free_desc(dev_priv->lpe_audio.irq); } + + +/** + * intel_lpe_audio_notify() - notify lpe audio event + * audio driver and i915 + * @dev_priv: the i915 drm device private data + * @eld : ELD data + * @port: port id + * @tmds_clk_speed: tmds clock frequency in Hz + * + * Notify lpe audio driver of eld change. + */ +void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, + void *eld, int port, int tmds_clk_speed) +{ + unsigned long irq_flags; + struct intel_hdmi_lpe_audio_pdata *pdata = NULL; + + if (!HAS_LPE_AUDIO(dev_priv)) + return; + + pdata = dev_get_platdata( + &(dev_priv->lpe_audio.platdev->dev)); + + spin_lock_irqsave(&pdata->lpe_audio_slock, irq_flags); + + if (eld != NULL) { + memcpy(pdata->eld.eld_data, eld, + HDMI_MAX_ELD_BYTES); + pdata->eld.port_id = port; + pdata->hdmi_connected = true; + + if (tmds_clk_speed) + pdata->tmds_clock_speed = tmds_clk_speed; + } else { + memset(pdata->eld.eld_data, 0, + HDMI_MAX_ELD_BYTES); + pdata->hdmi_connected = false; + } + + if (pdata->notify_audio_lpe) + pdata->notify_audio_lpe( + (eld != NULL) ? &pdata->eld : NULL); + else + pdata->notify_pending = true; + + spin_unlock_irqrestore(&pdata->lpe_audio_slock, + irq_flags); +}
On Sat, 21 Jan 2017, Jerome Anand jerome.anand@intel.com wrote:
Notifiations like mode change, hot plug and edid to the audio driver are added. This is inturn used by the audio driver for its functionality.
A new interface file capturing the notifications needed by the audio driver is added
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Jerome Anand jerome.anand@intel.com
Not a detailed technical review, but
Acked-by: Jani Nikula jani.nikula@intel.com
One nitpick below, up to you if you care to change.
drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/intel_audio.c | 8 ++++++ drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 49 ++++++++++++++++++++++++++++++++++ 4 files changed, 60 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index cc7033a..601c8ad 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3623,6 +3623,8 @@ int intel_lpe_audio_setup(struct drm_i915_private *dev_priv); void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv); +void intel_lpe_audio_notify(struct drm_i915_private *dev_priv,
void *eld, int port, int tmds_clk_speed);
/* intel_i2c.c */ extern int intel_setup_gmbus(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 16c2027..00a485e 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -24,6 +24,7 @@ #include <linux/kernel.h> #include <linux/component.h> #include <drm/i915_component.h> +#include <drm/intel_lpe_audio.h> #include "intel_drv.h"
#include <drm/drmP.h> @@ -630,6 +631,10 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder, if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port, (int) pipe);
- if (HAS_LPE_AUDIO(dev_priv))
intel_lpe_audio_notify(dev_priv, connector->eld, port,
crtc_state->port_clock);
Seems unnecessary to check for HAS_LPE_AUDIO (which you'll change to dev_priv->lpe_audio.platdev, right ;) both in the caller and callee. Pick one.
}
/** @@ -663,6 +668,9 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder) if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port, (int) pipe);
- if (HAS_LPE_AUDIO(dev_priv))
intel_lpe_audio_notify(dev_priv, NULL, port, 0);
}
/** diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 0bcfead..377584e1 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -36,6 +36,7 @@ #include <drm/drm_edid.h> #include "intel_drv.h" #include <drm/i915_drm.h> +#include <drm/intel_lpe_audio.h> #include "i915_drv.h"
static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 099732c..293084d 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -337,3 +337,52 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv)
irq_free_desc(dev_priv->lpe_audio.irq); }
+/**
- intel_lpe_audio_notify() - notify lpe audio event
- audio driver and i915
- @dev_priv: the i915 drm device private data
- @eld : ELD data
- @port: port id
- @tmds_clk_speed: tmds clock frequency in Hz
- Notify lpe audio driver of eld change.
- */
+void intel_lpe_audio_notify(struct drm_i915_private *dev_priv,
void *eld, int port, int tmds_clk_speed)
+{
- unsigned long irq_flags;
- struct intel_hdmi_lpe_audio_pdata *pdata = NULL;
- if (!HAS_LPE_AUDIO(dev_priv))
return;
- pdata = dev_get_platdata(
&(dev_priv->lpe_audio.platdev->dev));
- spin_lock_irqsave(&pdata->lpe_audio_slock, irq_flags);
- if (eld != NULL) {
memcpy(pdata->eld.eld_data, eld,
HDMI_MAX_ELD_BYTES);
pdata->eld.port_id = port;
pdata->hdmi_connected = true;
if (tmds_clk_speed)
pdata->tmds_clock_speed = tmds_clk_speed;
- } else {
memset(pdata->eld.eld_data, 0,
HDMI_MAX_ELD_BYTES);
pdata->hdmi_connected = false;
- }
- if (pdata->notify_audio_lpe)
pdata->notify_audio_lpe(
(eld != NULL) ? &pdata->eld : NULL);
- else
pdata->notify_pending = true;
- spin_unlock_irqrestore(&pdata->lpe_audio_slock,
irq_flags);
+}
#include <drm/drmP.h> @@ -630,6 +631,10 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder, if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port, (int) pipe);
- if (HAS_LPE_AUDIO(dev_priv))
intel_lpe_audio_notify(dev_priv, connector->eld, port,
crtc_state->port_clock);
Seems unnecessary to check for HAS_LPE_AUDIO (which you'll change to dev_priv->lpe_audio.platdev, right ;) both in the caller and callee. Pick one.
If we test inside of the function, it'd mean an unconditional jump to test a feature that exists on only two platforms out of the dozen or so that this i915 driver handles. No objection to do the change but is this really desired?
On Mon, 23 Jan 2017, Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com wrote:
#include <drm/drmP.h> @@ -630,6 +631,10 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder, if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port, (int) pipe);
- if (HAS_LPE_AUDIO(dev_priv))
intel_lpe_audio_notify(dev_priv, connector->eld, port,
crtc_state->port_clock);
Seems unnecessary to check for HAS_LPE_AUDIO (which you'll change to dev_priv->lpe_audio.platdev, right ;) both in the caller and callee. Pick one.
If we test inside of the function, it'd mean an unconditional jump to test a feature that exists on only two platforms out of the dozen or so that this i915 driver handles. No objection to do the change but is this really desired?
*shrug* no big deal to check in both.
BR, Jani.
-----Original Message----- From: Jani Nikula [mailto:jani.nikula@linux.intel.com] Sent: Tuesday, January 24, 2017 12:31 PM To: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com; Anand, Jerome jerome.anand@intel.com; intel-gfx@lists.freedesktop.org; alsa- devel@alsa-project.org Cc: tiwai@suse.de; broonie@kernel.org; Ughreja, Rakesh A rakesh.a.ughreja@intel.com Subject: Re: [Intel-gfx] [PATCH v4 2/5] drm/i915: Add support for audio driver notifications
On Mon, 23 Jan 2017, Pierre-Louis Bossart <pierre- louis.bossart@linux.intel.com> wrote:
#include <drm/drmP.h> @@ -630,6 +631,10 @@ void intel_audio_codec_enable(struct
intel_encoder *intel_encoder,
if (acomp && acomp->audio_ops && acomp->audio_ops-
pin_eld_notify)
acomp->audio_ops->pin_eld_notify(acomp->audio_ops-
audio_ptr,
(int) port, (int) pipe);
- if (HAS_LPE_AUDIO(dev_priv))
intel_lpe_audio_notify(dev_priv, connector->eld, port,
crtc_state->port_clock);
Seems unnecessary to check for HAS_LPE_AUDIO (which you'll change to dev_priv->lpe_audio.platdev, right ;) both in the caller and callee. Pick one.
If we test inside of the function, it'd mean an unconditional jump to test a feature that exists on only two platforms out of the dozen or so that this i915 driver handles. No objection to do the change but is this really desired?
*shrug* no big deal to check in both.
Thanks for the ack Jani. It was added based on one review comment. I'll remove it here and have the check only inside the API
BR, Jani.
-- Jani Nikula, Intel Open Source Technology Center
On Baytrail and Cherrytrail, HDaudio may be fused out or disabled by the BIOS. This driver enables an alternate path to the i915 display registers and DMA.
Although there is no hardware path between i915 display and LPE/SST audio clusters, this HDMI capability is referred to in the documentation as "HDMI LPE Audio" so we keep the name for consistency. There is no hardware path or control dependencies with the LPE/SST DSP functionality.
The hdmi-lpe-audio driver will be probed when the i915 driver creates a child platform device.
Since this driver is neither SoC nor PCI, a new x86 folder is added Additional indirections in the code will be cleaned up in the next series to aid smoother DP integration
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Jerome Anand jerome.anand@intel.com --- sound/Kconfig | 2 + sound/Makefile | 2 +- sound/x86/Kconfig | 15 + sound/x86/Makefile | 4 + sound/x86/intel_hdmi_lpe_audio.c | 614 +++++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_lpe_audio.h | 683 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 1319 insertions(+), 1 deletion(-) create mode 100644 sound/x86/Kconfig create mode 100644 sound/x86/Makefile create mode 100644 sound/x86/intel_hdmi_lpe_audio.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.h
diff --git a/sound/Kconfig b/sound/Kconfig index 5a240e0..ee2e69a 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -108,6 +108,8 @@ source "sound/parisc/Kconfig"
source "sound/soc/Kconfig"
+source "sound/x86/Kconfig" + endif # SND
menuconfig SOUND_PRIME diff --git a/sound/Makefile b/sound/Makefile index c41bdf5..6de45d2 100644 --- a/sound/Makefile +++ b/sound/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_SOUND) += soundcore.o obj-$(CONFIG_SOUND_PRIME) += oss/ obj-$(CONFIG_DMASOUND) += oss/ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ - firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ + firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ obj-$(CONFIG_SND_AOA) += aoa/
# This one must be compilable even if sound is configured out diff --git a/sound/x86/Kconfig b/sound/x86/Kconfig new file mode 100644 index 0000000..30d066e --- /dev/null +++ b/sound/x86/Kconfig @@ -0,0 +1,15 @@ +menuconfig SND_X86 + tristate "X86 sound devices" + depends on X86 + ---help--- + X86 sound devices that don't fall under SoC or PCI categories + +if SND_X86 + +config HDMI_LPE_AUDIO + tristate "HDMI audio without HDaudio on Intel Atom platforms" + depends on DRM_I915 + help + Choose this option to support HDMI LPE Audio mode + +endif # SND_X86 diff --git a/sound/x86/Makefile b/sound/x86/Makefile new file mode 100644 index 0000000..9b87384 --- /dev/null +++ b/sound/x86/Makefile @@ -0,0 +1,4 @@ +snd-hdmi-lpe-audio-objs += \ + intel_hdmi_lpe_audio.o + +obj-$(CONFIG_HDMI_LPE_AUDIO) += snd-hdmi-lpe-audio.o diff --git a/sound/x86/intel_hdmi_lpe_audio.c b/sound/x86/intel_hdmi_lpe_audio.c new file mode 100644 index 0000000..a9fd2d3 --- /dev/null +++ b/sound/x86/intel_hdmi_lpe_audio.c @@ -0,0 +1,614 @@ +/* + * intel_hdmi_lpe_audio.c - Intel HDMI LPE audio driver for Atom platforms + * + * Copyright (C) 2016 Intel Corp + * Authors: + * Jerome Anand jerome.anand@intel.com + * Aravind Siddappaji aravindx.siddappaji@intel.com + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/platform_device.h> +#include <linux/irqreturn.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/control.h> +#include <sound/initval.h> +#include <drm/intel_lpe_audio.h> +#include "intel_hdmi_lpe_audio.h" + +/* globals*/ +static struct platform_device *hlpe_pdev; +static int hlpe_state; +static union otm_hdmi_eld_t hlpe_eld; + +struct hdmi_lpe_audio_ctx { + int irq; + void __iomem *mmio_start; + had_event_call_back had_event_callbacks; + struct snd_intel_had_interface *had_interface; + void *had_pvt_data; + int tmds_clock_speed; + unsigned int had_config_offset; + int hdmi_audio_interrupt_mask; + struct work_struct hdmi_audio_wq; +}; + +static void hdmi_set_eld(void *eld) +{ + int size; + + BUILD_BUG_ON(sizeof(hlpe_eld) > HDMI_MAX_ELD_BYTES); + + size = sizeof(hlpe_eld); + memcpy((void *)&hlpe_eld, eld, size); +} + +static int hdmi_get_eld(void *eld) +{ + u8 *eld_data = (u8 *)&hlpe_eld; + + memcpy(eld, (void *)&hlpe_eld, sizeof(hlpe_eld)); + + print_hex_dump_bytes("eld: ", DUMP_PREFIX_NONE, eld_data, + sizeof(hlpe_eld)); + return 0; +} + + +static struct hdmi_lpe_audio_ctx *get_hdmi_context(void) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(hlpe_pdev); + return ctx; +} + +/* + * return whether HDMI audio device is busy. + */ +bool mid_hdmi_audio_is_busy(void *ddev) +{ + struct hdmi_lpe_audio_ctx *ctx; + int hdmi_audio_busy = 0; + struct hdmi_audio_event hdmi_audio_event; + + dev_dbg(&hlpe_pdev->dev, "%s: Enter", __func__); + + ctx = platform_get_drvdata(hlpe_pdev); + + if (hlpe_state == hdmi_connector_status_disconnected) { + /* HDMI is not connected, assuming audio device is idle. */ + return false; + } + + if (ctx->had_interface) { + hdmi_audio_event.type = HAD_EVENT_QUERY_IS_AUDIO_BUSY; + hdmi_audio_busy = ctx->had_interface->query( + ctx->had_pvt_data, + hdmi_audio_event); + return hdmi_audio_busy != 0; + } + return false; +} + +/* + * return true if HDMI audio device is suspended/ disconnected + */ +bool mid_hdmi_audio_suspend(void *ddev) +{ + struct hdmi_lpe_audio_ctx *ctx; + struct hdmi_audio_event hdmi_audio_event; + int ret = 0; + + ctx = platform_get_drvdata(hlpe_pdev); + + if (hlpe_state == hdmi_connector_status_disconnected) { + /* HDMI is not connected, assuming audio device + * is suspended already. + */ + return true; + } + + dev_dbg(&hlpe_pdev->dev, "%s: hlpe_state %d", __func__, + hlpe_state); + + if (ctx->had_interface) { + hdmi_audio_event.type = 0; + ret = ctx->had_interface->suspend(ctx->had_pvt_data, + hdmi_audio_event); + return (ret == 0) ? true : false; + } + return true; +} + +void mid_hdmi_audio_resume(void *ddev) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(hlpe_pdev); + + if (hlpe_state == hdmi_connector_status_disconnected) { + /* HDMI is not connected, there is no need + * to resume audio device. + */ + return; + } + + dev_dbg(&hlpe_pdev->dev, "%s: hlpe_state %d", __func__, hlpe_state); + + if (ctx->had_interface) + ctx->had_interface->resume(ctx->had_pvt_data); +} + +void mid_hdmi_audio_signal_event(enum had_event_type event) +{ + struct hdmi_lpe_audio_ctx *ctx; + + dev_dbg(&hlpe_pdev->dev, "%s: Enter\n", __func__); + + ctx = platform_get_drvdata(hlpe_pdev); + + /* The handler is protected in the respective + * event handlers to avoid races + */ + if (ctx->had_event_callbacks) + (*ctx->had_event_callbacks)(event, + ctx->had_pvt_data); +} + +/** + * used to write into display controller HDMI audio registers. + */ +static int hdmi_audio_write(u32 reg, u32 val) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(hlpe_pdev); + + dev_dbg(&hlpe_pdev->dev, "%s: reg[0x%x] = 0x%x\n", __func__, reg, val); + + iowrite32(val, (ctx->mmio_start+reg)); + + return 0; +} + +/** + * used to get the register value read from + * display controller HDMI audio registers. + */ +static int hdmi_audio_read(u32 reg, u32 *val) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(hlpe_pdev); + *val = ioread32(ctx->mmio_start+reg); + dev_dbg(&hlpe_pdev->dev, "%s: reg[0x%x] = 0x%x\n", __func__, reg, *val); + return 0; +} + +/** + * used to update the masked bits in display controller HDMI + * audio registers. + */ +static int hdmi_audio_rmw(u32 reg, u32 val, u32 mask) +{ + struct hdmi_lpe_audio_ctx *ctx; + u32 val_tmp = 0; + + ctx = platform_get_drvdata(hlpe_pdev); + + val_tmp = (val & mask) | + ((ioread32(ctx->mmio_start + reg)) & ~mask); + + iowrite32(val_tmp, (ctx->mmio_start+reg)); + dev_dbg(&hlpe_pdev->dev, "%s: reg[0x%x] = 0x%x\n", __func__, + reg, val_tmp); + + return 0; +} + +/** + * used to return the HDMI audio capabilities. + * e.g. resolution, frame rate. + */ +static int hdmi_audio_get_caps(enum had_caps_list get_element, + void *capabilities) +{ + struct hdmi_lpe_audio_ctx *ctx; + int ret = 0; + + ctx = get_hdmi_context(); + + dev_dbg(&hlpe_pdev->dev, "%s: Enter\n", __func__); + + switch (get_element) { + case HAD_GET_ELD: + ret = hdmi_get_eld(capabilities); + break; + case HAD_GET_DISPLAY_RATE: + /* ToDo: Verify if sampling freq logic is correct */ + *(u32 *)capabilities = ctx->tmds_clock_speed; + dev_dbg(&hlpe_pdev->dev, "%s: tmds_clock_speed = 0x%x\n", + __func__, ctx->tmds_clock_speed); + break; + default: + break; + } + + return ret; +} + +/** + * used to get the current hdmi base address + */ +int hdmi_audio_get_register_base(u32 **reg_base, + u32 *config_offset) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(hlpe_pdev); + *reg_base = (u32 *)(ctx->mmio_start); + *config_offset = ctx->had_config_offset; + dev_dbg(&hlpe_pdev->dev, "%s: reg_base = 0x%p, cfg_off = 0x%x\n", + __func__, *reg_base, *config_offset); + return 0; +} + +/** + * used to set the HDMI audio capabilities. + * e.g. Audio INT. + */ +int hdmi_audio_set_caps(enum had_caps_list set_element, + void *capabilties) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(hlpe_pdev); + + dev_dbg(&hlpe_pdev->dev, "%s: cap_id = 0x%x\n", __func__, set_element); + + switch (set_element) { + case HAD_SET_ENABLE_AUDIO_INT: + { + u32 status_reg; + + hdmi_audio_read(AUD_HDMI_STATUS_v2 + + ctx->had_config_offset, &status_reg); + status_reg |= + HDMI_AUDIO_BUFFER_DONE | HDMI_AUDIO_UNDERRUN; + hdmi_audio_write(AUD_HDMI_STATUS_v2 + + ctx->had_config_offset, status_reg); + hdmi_audio_read(AUD_HDMI_STATUS_v2 + + ctx->had_config_offset, &status_reg); + + } + break; + default: + break; + } + + return 0; +} + +static struct hdmi_audio_registers_ops hdmi_audio_reg_ops = { + .hdmi_audio_get_register_base = hdmi_audio_get_register_base, + .hdmi_audio_read_register = hdmi_audio_read, + .hdmi_audio_write_register = hdmi_audio_write, + .hdmi_audio_read_modify = hdmi_audio_rmw, +}; + +static struct hdmi_audio_query_set_ops hdmi_audio_get_set_ops = { + .hdmi_audio_get_caps = hdmi_audio_get_caps, + .hdmi_audio_set_caps = hdmi_audio_set_caps, +}; + +int mid_hdmi_audio_setup( + had_event_call_back audio_callbacks, + struct hdmi_audio_registers_ops *reg_ops, + struct hdmi_audio_query_set_ops *query_ops) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(hlpe_pdev); + + dev_dbg(&hlpe_pdev->dev, "%s: called\n", __func__); + + reg_ops->hdmi_audio_get_register_base = + (hdmi_audio_reg_ops.hdmi_audio_get_register_base); + reg_ops->hdmi_audio_read_register = + (hdmi_audio_reg_ops.hdmi_audio_read_register); + reg_ops->hdmi_audio_write_register = + (hdmi_audio_reg_ops.hdmi_audio_write_register); + reg_ops->hdmi_audio_read_modify = + (hdmi_audio_reg_ops.hdmi_audio_read_modify); + query_ops->hdmi_audio_get_caps = + hdmi_audio_get_set_ops.hdmi_audio_get_caps; + query_ops->hdmi_audio_set_caps = + hdmi_audio_get_set_ops.hdmi_audio_set_caps; + + ctx->had_event_callbacks = audio_callbacks; + + return 0; +} + +static void _had_wq(struct work_struct *work) +{ + mid_hdmi_audio_signal_event(HAD_EVENT_HOT_PLUG); +} + +int mid_hdmi_audio_register(struct snd_intel_had_interface *driver, + void *had_data) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(hlpe_pdev); + + dev_dbg(&hlpe_pdev->dev, "%s: called\n", __func__); + + ctx->had_pvt_data = had_data; + ctx->had_interface = driver; + + /* The Audio driver is loading now and we need to notify + * it if there is an HDMI device attached + */ + INIT_WORK(&ctx->hdmi_audio_wq, _had_wq); + dev_dbg(&hlpe_pdev->dev, "%s: Scheduling HDMI audio work queue\n", + __func__); + schedule_work(&ctx->hdmi_audio_wq); + + return 0; +} + +static irqreturn_t display_pipe_interrupt_handler(int irq, void *dev_id) +{ + u32 audio_stat, audio_reg; + + struct hdmi_lpe_audio_ctx *ctx; + + dev_dbg(&hlpe_pdev->dev, "%s: Enter\n", __func__); + + ctx = platform_get_drvdata(hlpe_pdev); + + audio_reg = ctx->had_config_offset + AUD_HDMI_STATUS_v2; + hdmi_audio_read(audio_reg, &audio_stat); + + if (audio_stat & HDMI_AUDIO_UNDERRUN) { + hdmi_audio_write(audio_reg, HDMI_AUDIO_UNDERRUN); + mid_hdmi_audio_signal_event( + HAD_EVENT_AUDIO_BUFFER_UNDERRUN); + } + + if (audio_stat & HDMI_AUDIO_BUFFER_DONE) { + hdmi_audio_write(audio_reg, HDMI_AUDIO_BUFFER_DONE); + mid_hdmi_audio_signal_event( + HAD_EVENT_AUDIO_BUFFER_DONE); + } + + return IRQ_HANDLED; +} + +static void notify_audio_lpe(void *audio_ptr) +{ + struct hdmi_lpe_audio_ctx *ctx = get_hdmi_context(); + struct intel_hdmi_lpe_audio_pdata *pdata = hlpe_pdev->dev.platform_data; + struct intel_hdmi_lpe_audio_eld *eld = audio_ptr; + + if (pdata->hdmi_connected != true) { + + dev_dbg(&hlpe_pdev->dev, "%s: Event: HAD_NOTIFY_HOT_UNPLUG\n", + __func__); + + if (hlpe_state == hdmi_connector_status_connected) { + + hlpe_state = + hdmi_connector_status_disconnected; + + mid_hdmi_audio_signal_event( + HAD_EVENT_HOT_UNPLUG); + } else + dev_dbg(&hlpe_pdev->dev, "%s: Already Unplugged!\n", + __func__); + + } else if (eld != NULL) { + + hdmi_set_eld(eld->eld_data); + + mid_hdmi_audio_signal_event(HAD_EVENT_HOT_PLUG); + + hlpe_state = hdmi_connector_status_connected; + + dev_dbg(&hlpe_pdev->dev, "%s: HAD_NOTIFY_ELD : port = %d, tmds = %d\n", + __func__, eld->port_id, pdata->tmds_clock_speed); + + if (pdata->tmds_clock_speed) { + ctx->tmds_clock_speed = pdata->tmds_clock_speed; + mid_hdmi_audio_signal_event(HAD_EVENT_MODE_CHANGING); + } + } else + dev_dbg(&hlpe_pdev->dev, "%s: Event: NULL EDID!!\n", __func__); +} + +/** + * hdmi_lpe_audio_probe - start bridge with i915 + * + * This function is called when the i915 driver creates the hdmi-lpe-audio + * platform device. Card creation is deferred until a hot plug event is + * received + */ +static int hdmi_lpe_audio_probe(struct platform_device *pdev) +{ + struct hdmi_lpe_audio_ctx *ctx; + struct intel_hdmi_lpe_audio_pdata *pdata; + int irq; + struct resource *res_mmio; + void __iomem *mmio_start; + int ret = 0; + unsigned long flag_irq; + static const struct pci_device_id cherryview_ids[] = { + {PCI_DEVICE(0x8086, 0x22b0)}, + {PCI_DEVICE(0x8086, 0x22b1)}, + {PCI_DEVICE(0x8086, 0x22b2)}, + {PCI_DEVICE(0x8086, 0x22b3)}, + {} + }; + + dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__); + + /*TBD:remove globals*/ + hlpe_pdev = pdev; + hlpe_state = hdmi_connector_status_disconnected; + + /* get resources */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&hlpe_pdev->dev, "Could not get irq resource\n"); + return -ENODEV; + } + + res_mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mmio) { + dev_err(&hlpe_pdev->dev, "Could not get IO_MEM resources\n"); + return -ENXIO; + } + + dev_dbg(&hlpe_pdev->dev, "%s: mmio_start = 0x%x, mmio_end = 0x%x\n", + __func__, (unsigned int)res_mmio->start, + (unsigned int)res_mmio->end); + + mmio_start = ioremap_nocache(res_mmio->start, + (size_t)((res_mmio->end - res_mmio->start) + + 1)); + if (!mmio_start) { + dev_err(&hlpe_pdev->dev, "Could not get ioremap\n"); + return -EACCES; + } + + /* setup interrupt handler */ + ret = request_irq(irq, display_pipe_interrupt_handler, + 0, + pdev->name, + NULL); + if (ret < 0) { + dev_err(&hlpe_pdev->dev, "request_irq failed\n"); + iounmap(mmio_start); + return -ENODEV; + } + + /* alloc and save context */ + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (ctx == NULL) { + free_irq(irq, NULL); + iounmap(mmio_start); + return -ENOMEM; + } + + ctx->irq = irq; + dev_dbg(&hlpe_pdev->dev, "hdmi lpe audio: irq num = %d\n", irq); + ctx->mmio_start = mmio_start; + ctx->tmds_clock_speed = DIS_SAMPLE_RATE_148_5; + + if (pci_dev_present(cherryview_ids)) { + dev_dbg(&hlpe_pdev->dev, "%s: Cherrytrail LPE - Detected\n", + __func__); + ctx->had_config_offset = AUDIO_HDMI_CONFIG_C; + } else { + dev_dbg(&hlpe_pdev->dev, "%s: Baytrail LPE - Assume\n", + __func__); + ctx->had_config_offset = AUDIO_HDMI_CONFIG_A; + } + + pdata = pdev->dev.platform_data; + + if (pdata == NULL) { + dev_err(&hlpe_pdev->dev, "%s: quit: pdata not allocated by i915!!\n", __func__); + kfree(ctx); + free_irq(irq, NULL); + iounmap(mmio_start); + return -ENOMEM; + } + + platform_set_drvdata(pdev, ctx); + + dev_dbg(&hlpe_pdev->dev, "hdmi lpe audio: setting pin eld notify callback\n"); + + spin_lock_irqsave(&pdata->lpe_audio_slock, flag_irq); + pdata->notify_audio_lpe = notify_audio_lpe; + + if (pdata->notify_pending) { + + dev_dbg(&hlpe_pdev->dev, "%s: handle pending notification\n", __func__); + notify_audio_lpe(&pdata->eld); + pdata->notify_pending = false; + } + spin_unlock_irqrestore(&pdata->lpe_audio_slock, flag_irq); + + return ret; +} + +/** + * hdmi_lpe_audio_remove - stop bridge with i915 + * + * This function is called when the platform device is destroyed. The sound + * card should have been removed on hot plug event. + */ +static int hdmi_lpe_audio_remove(struct platform_device *pdev) +{ + struct hdmi_lpe_audio_ctx *ctx; + + dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__); + + /* get context, release resources */ + ctx = platform_get_drvdata(pdev); + iounmap(ctx->mmio_start); + free_irq(ctx->irq, NULL); + kfree(ctx); + return 0; +} + +static int hdmi_lpe_audio_suspend(struct platform_device *pt_dev, + pm_message_t state) +{ + dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__); + mid_hdmi_audio_suspend(NULL); + return 0; +} + +static int hdmi_lpe_audio_resume(struct platform_device *pt_dev) +{ + dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__); + mid_hdmi_audio_resume(NULL); + return 0; +} + +static struct platform_driver hdmi_lpe_audio_driver = { + .driver = { + .name = "hdmi-lpe-audio", + }, + .probe = hdmi_lpe_audio_probe, + .remove = hdmi_lpe_audio_remove, + .suspend = hdmi_lpe_audio_suspend, + .resume = hdmi_lpe_audio_resume +}; + +module_platform_driver(hdmi_lpe_audio_driver); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:hdmi_lpe_audio"); diff --git a/sound/x86/intel_hdmi_lpe_audio.h b/sound/x86/intel_hdmi_lpe_audio.h new file mode 100644 index 0000000..ec4bde5 --- /dev/null +++ b/sound/x86/intel_hdmi_lpe_audio.h @@ -0,0 +1,683 @@ +/* + * intel_hdmi_lpe_audio.h - Intel HDMI LPE audio driver + * + * Copyright (C) 2016 Intel Corp + * Authors: Sailaja Bandarupalli sailaja.bandarupalli@intel.com + * Ramesh Babu K V ramesh.babu@intel.com + * Vaibhav Agarwal vaibhav.agarwal@intel.com + * Jerome Anand jerome.anand@intel.com + * Aravind Siddappaji aravindx.siddappaji@intel.com + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#ifndef __INTEL_HDMI_LPE_AUDIO_H +#define __INTEL_HDMI_LPE_AUDIO_H + +#include <linux/types.h> +#include <sound/initval.h> +#include <linux/version.h> +#include <linux/pm_runtime.h> +#include <sound/asoundef.h> +#include <sound/control.h> +#include <sound/pcm.h> + +#define HMDI_LPE_AUDIO_DRIVER_NAME "intel-hdmi-lpe-audio" +#define HAD_MAX_DEVICES 1 +#define HAD_MIN_CHANNEL 2 +#define HAD_MAX_CHANNEL 8 +#define HAD_NUM_OF_RING_BUFS 4 + +/* Assume 192KHz, 8channel, 25msec period */ +#define HAD_MAX_BUFFER (600*1024) +#define HAD_MIN_BUFFER (32*1024) +#define HAD_MAX_PERIODS 4 +#define HAD_MIN_PERIODS 4 +#define HAD_MAX_PERIOD_BYTES (HAD_MAX_BUFFER/HAD_MIN_PERIODS) +#define HAD_MIN_PERIOD_BYTES 256 +#define HAD_FIFO_SIZE 0 /* fifo not being used */ +#define MAX_SPEAKERS 8 + +#define AUD_SAMPLE_RATE_32 32000 +#define AUD_SAMPLE_RATE_44_1 44100 +#define AUD_SAMPLE_RATE_48 48000 +#define AUD_SAMPLE_RATE_88_2 88200 +#define AUD_SAMPLE_RATE_96 96000 +#define AUD_SAMPLE_RATE_176_4 176400 +#define AUD_SAMPLE_RATE_192 192000 + +#define HAD_MIN_RATE AUD_SAMPLE_RATE_32 +#define HAD_MAX_RATE AUD_SAMPLE_RATE_192 + +#define DIS_SAMPLE_RATE_25_2 25200 +#define DIS_SAMPLE_RATE_27 27000 +#define DIS_SAMPLE_RATE_54 54000 +#define DIS_SAMPLE_RATE_74_25 74250 +#define DIS_SAMPLE_RATE_148_5 148500 +#define HAD_REG_WIDTH 0x08 +#define HAD_MAX_HW_BUFS 0x04 +#define HAD_MAX_DIP_WORDS 16 +#define INTEL_HAD "IntelHdmiLpeAudio" + +/* _AUD_CONFIG register MASK */ +#define AUD_CONFIG_MASK_UNDERRUN 0xC0000000 +#define AUD_CONFIG_MASK_SRDBG 0x00000002 +#define AUD_CONFIG_MASK_FUNCRST 0x00000001 + +#define MAX_CNT 0xFF +#define HAD_SUSPEND_DELAY 1000 + +#define OTM_HDMI_ELD_SIZE 128 + +union otm_hdmi_eld_t { + unsigned char eld_data[OTM_HDMI_ELD_SIZE]; + struct { + /* Byte[0] = ELD Version Number */ + union { + unsigned char byte0; + struct { + unsigned char reserved:3; /* Reserf */ + unsigned char eld_ver:5; /* ELD Version Number */ + /* 00000b - reserved + * 00001b - first rev, obsoleted + * 00010b - version 2, supporting CEA version + * 861D or below + * 00011b:11111b - reserved + * for future + */ + }; + }; + + /* Byte[1] = Vendor Version Field */ + union { + unsigned char vendor_version; + struct { + unsigned char reserved1:3; + unsigned char veld_ver:5; /* Version number of the ELD + * extension. This value is + * provisioned and unique to + * each vendor. + */ + }; + }; + + /* Byte[2] = Baseline Length field */ + unsigned char baseline_eld_length; /* Length of the Baseline structure + * divided by Four. + */ + + /* Byte [3] = Reserved for future use */ + unsigned char byte3; + + /* Starting of the BaseLine EELD structure + * Byte[4] = Monitor Name Length + */ + union { + unsigned char byte4; + struct { + unsigned char mnl:5; + unsigned char cea_edid_rev_id:3; + }; + }; + + /* Byte[5] = Capabilities */ + union { + unsigned char capabilities; + struct { + unsigned char hdcp:1; /* HDCP support */ + unsigned char ai_support:1; /* AI support */ + unsigned char connection_type:2; /* Connection type + * 00 - HDMI + * 01 - DP + * 10 -11 Reserved + * for future + * connection types + */ + unsigned char sadc:4; /* Indicates number of 3 bytes + * Short Audio Descriptors. + */ + }; + }; + + /* Byte[6] = Audio Synch Delay */ + unsigned char audio_synch_delay; /* Amount of time reported by the + * sink that the video trails audio + * in milliseconds. + */ + + /* Byte[7] = Speaker Allocation Block */ + union { + unsigned char speaker_allocation_block; + struct { + unsigned char flr:1; /*Front Left and Right channels*/ + unsigned char lfe:1; /*Low Frequency Effect channel*/ + unsigned char fc:1; /*Center transmission channel*/ + unsigned char rlr:1; /*Rear Left and Right channels*/ + unsigned char rc:1; /*Rear Center channel*/ + unsigned char flrc:1; /*Front left and Right of Center + *transmission channels + */ + unsigned char rlrc:1; /*Rear left and Right of Center + *transmission channels + */ + unsigned char reserved3:1; /* Reserved */ + }; + }; + + /* Byte[8 - 15] - 8 Byte port identification value */ + unsigned char port_id_value[8]; + + /* Byte[16 - 17] - 2 Byte Manufacturer ID */ + unsigned char manufacturer_id[2]; + + /* Byte[18 - 19] - 2 Byte Product ID */ + unsigned char product_id[2]; + + /* Byte [20-83] - 64 Bytes of BaseLine Data */ + unsigned char mn_sand_sads[64]; /* This will include + * - ASCII string of Monitor name + * - List of 3 byte SADs + * - Zero padding + */ + + /* Vendor ELD Block should continue here! + * No Vendor ELD block defined as of now. + */ + } __packed; +}; + +/** + * enum had_status - Audio stream states + * + * @STREAM_INIT: Stream initialized + * @STREAM_RUNNING: Stream running + * @STREAM_PAUSED: Stream paused + * @STREAM_DROPPED: Stream dropped + */ +enum had_stream_status { + STREAM_INIT = 0, + STREAM_RUNNING = 1, + STREAM_PAUSED = 2, + STREAM_DROPPED = 3 +}; + +/** + * enum had_status_stream - HAD stream states + */ +enum had_status_stream { + HAD_INIT = 0, + HAD_RUNNING_STREAM, +}; + +enum had_drv_status { + HAD_DRV_CONNECTED, + HAD_DRV_RUNNING, + HAD_DRV_DISCONNECTED, + HAD_DRV_SUSPENDED, + HAD_DRV_ERR, +}; + +/* enum intel_had_aud_buf_type - HDMI controller ring buffer types */ +enum intel_had_aud_buf_type { + HAD_BUF_TYPE_A = 0, + HAD_BUF_TYPE_B = 1, + HAD_BUF_TYPE_C = 2, + HAD_BUF_TYPE_D = 3, +}; + +enum num_aud_ch { + CH_STEREO = 0, + CH_THREE_FOUR = 1, + CH_FIVE_SIX = 2, + CH_SEVEN_EIGHT = 3 +}; + +/* HDMI Controller register offsets - audio domain common */ +/* Base address for below regs = 0x65000 */ +enum hdmi_ctrl_reg_offset_common { + AUDIO_HDMI_CONFIG_A = 0x000, + AUDIO_HDMI_CONFIG_B = 0x800, + AUDIO_HDMI_CONFIG_C = 0x900, +}; +/* HDMI controller register offsets */ +enum hdmi_ctrl_reg_offset_v1 { + AUD_CONFIG = 0x0, + AUD_CH_STATUS_0 = 0x08, + AUD_CH_STATUS_1 = 0x0C, + AUD_HDMI_CTS = 0x10, + AUD_N_ENABLE = 0x14, + AUD_SAMPLE_RATE = 0x18, + AUD_BUF_CONFIG = 0x20, + AUD_BUF_CH_SWAP = 0x24, + AUD_BUF_A_ADDR = 0x40, + AUD_BUF_A_LENGTH = 0x44, + AUD_BUF_B_ADDR = 0x48, + AUD_BUF_B_LENGTH = 0x4c, + AUD_BUF_C_ADDR = 0x50, + AUD_BUF_C_LENGTH = 0x54, + AUD_BUF_D_ADDR = 0x58, + AUD_BUF_D_LENGTH = 0x5c, + AUD_CNTL_ST = 0x60, + AUD_HDMI_STATUS = 0x68, + AUD_HDMIW_INFOFR = 0x114, +}; + +/* + * Delta changes in HDMI controller register offsets + * compare to v1 version + */ + +enum hdmi_ctrl_reg_offset_v2 { + AUD_HDMI_STATUS_v2 = 0x64, + AUD_HDMIW_INFOFR_v2 = 0x68, +}; + +/* + * CEA speaker placement: + * + * FL FLC FC FRC FR + * + * LFE + * + * RL RLC RC RRC RR + * + * The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M + * corresponds to CEA RL/RR; The SMPTE channel _assignment_ C/LFE is + * swapped to CEA LFE/FC. + */ +enum cea_speaker_placement { + FL = (1 << 0), /* Front Left */ + FC = (1 << 1), /* Front Center */ + FR = (1 << 2), /* Front Right */ + FLC = (1 << 3), /* Front Left Center */ + FRC = (1 << 4), /* Front Right Center */ + RL = (1 << 5), /* Rear Left */ + RC = (1 << 6), /* Rear Center */ + RR = (1 << 7), /* Rear Right */ + RLC = (1 << 8), /* Rear Left Center */ + RRC = (1 << 9), /* Rear Right Center */ + LFE = (1 << 10), /* Low Frequency Effect */ +}; + +struct cea_channel_speaker_allocation { + int ca_index; + int speakers[8]; + + /* derived values, just for convenience */ + int channels; + int spk_mask; +}; + +struct channel_map_table { + unsigned char map; /* ALSA API channel map position */ + unsigned char cea_slot; /* CEA slot value */ + int spk_mask; /* speaker position bit mask */ +}; + +/** + * union aud_cfg - Audio configuration + * + * @cfg_regx: individual register bits + * @cfg_regval: full register value + * + */ +union aud_cfg { + struct { + u32 aud_en:1; + u32 layout:1; + u32 fmt:2; + u32 num_ch:2; + u32 rsvd0:1; + u32 set:1; + u32 flat:1; + u32 val_bit:1; + u32 user_bit:1; + u32 underrun:1; + u32 rsvd1:20; + } cfg_regx; + struct { + u32 aud_en:1; + u32 layout:1; + u32 fmt:2; + u32 num_ch:3; + u32 set:1; + u32 flat:1; + u32 val_bit:1; + u32 user_bit:1; + u32 underrun:1; + u32 packet_mode:1; + u32 left_align:1; + u32 bogus_sample:1; + u32 dp_modei:1; + u32 rsvd:16; + } cfg_regx_v2; + u32 cfg_regval; +}; + +/** + * union aud_ch_status_0 - Audio Channel Status 0 Attributes + * + * @status_0_regx:individual register bits + * @status_0_regval:full register value + * + */ +union aud_ch_status_0 { + struct { + u32 ch_status:1; + u32 lpcm_id:1; + u32 cp_info:1; + u32 format:3; + u32 mode:2; + u32 ctg_code:8; + u32 src_num:4; + u32 ch_num:4; + u32 samp_freq:4; + u32 clk_acc:2; + u32 rsvd:2; + } status_0_regx; + u32 status_0_regval; +}; + +/** + * union aud_ch_status_1 - Audio Channel Status 1 Attributes + * + * @status_1_regx: individual register bits + * @status_1_regval: full register value + * + */ +union aud_ch_status_1 { + struct { + u32 max_wrd_len:1; + u32 wrd_len:3; + u32 rsvd:28; + } status_1_regx; + u32 status_1_regval; +}; + +/** + * union aud_hdmi_cts - CTS register + * + * @cts_regx: individual register bits + * @cts_regval: full register value + * + */ +union aud_hdmi_cts { + struct { + u32 cts_val:20; + u32 en_cts_prog:1; + u32 rsvd:11; + } cts_regx; + struct { + u32 cts_val:24; + u32 en_cts_prog:1; + u32 rsvd:7; + } cts_regx_v2; + u32 cts_regval; +}; + +/** + * union aud_hdmi_n_enable - N register + * + * @n_regx: individual register bits + * @n_regval: full register value + * + */ +union aud_hdmi_n_enable { + struct { + u32 n_val:20; + u32 en_n_prog:1; + u32 rsvd:11; + } n_regx; + struct { + u32 n_val:24; + u32 en_n_prog:1; + u32 rsvd:7; + } n_regx_v2; + u32 n_regval; +}; + +/** + * union aud_buf_config - Audio Buffer configurations + * + * @buf_cfg_regx: individual register bits + * @buf_cfgval: full register value + * + */ +union aud_buf_config { + struct { + u32 fifo_width:8; + u32 rsvd0:8; + u32 aud_delay:8; + u32 rsvd1:8; + } buf_cfg_regx; + struct { + u32 audio_fifo_watermark:8; + u32 dma_fifo_watermark:3; + u32 rsvd0:5; + u32 aud_delay:8; + u32 rsvd1:8; + } buf_cfg_regx_v2; + u32 buf_cfgval; +}; + +/** + * union aud_buf_ch_swap - Audio Sample Swapping offset + * + * @buf_ch_swap_regx: individual register bits + * @buf_ch_swap_val: full register value + * + */ +union aud_buf_ch_swap { + struct { + u32 first_0:3; + u32 second_0:3; + u32 first_1:3; + u32 second_1:3; + u32 first_2:3; + u32 second_2:3; + u32 first_3:3; + u32 second_3:3; + u32 rsvd:8; + } buf_ch_swap_regx; + u32 buf_ch_swap_val; +}; + +/** + * union aud_buf_addr - Address for Audio Buffer + * + * @buf_addr_regx: individual register bits + * @buf_addr_val: full register value + * + */ +union aud_buf_addr { + struct { + u32 valid:1; + u32 intr_en:1; + u32 rsvd:4; + u32 addr:26; + } buf_addr_regx; + u32 buf_addr_val; +}; + +/** + * union aud_buf_len - Length of Audio Buffer + * + * @buf_len_regx: individual register bits + * @buf_len_val: full register value + * + */ +union aud_buf_len { + struct { + u32 buf_len:20; + u32 rsvd:12; + } buf_len_regx; + u32 buf_len_val; +}; + +/** + * union aud_ctrl_st - Audio Control State Register offset + * + * @ctrl_regx: individual register bits + * @ctrl_val: full register value + * + */ +union aud_ctrl_st { + struct { + u32 ram_addr:4; + u32 eld_ack:1; + u32 eld_addr:4; + u32 eld_buf_size:5; + u32 eld_valid:1; + u32 cp_ready:1; + u32 dip_freq:2; + u32 dip_idx:3; + u32 dip_en_sta:4; + u32 rsvd:7; + } ctrl_regx; + u32 ctrl_val; +}; + +/** + * union aud_info_frame1 - Audio HDMI Widget Data Island Packet offset + * + * @fr1_regx: individual register bits + * @fr1_val: full register value + * + */ +union aud_info_frame1 { + struct { + u32 pkt_type:8; + u32 ver_num:8; + u32 len:5; + u32 rsvd:11; + } fr1_regx; + u32 fr1_val; +}; + +/** + * union aud_info_frame2 - DIP frame 2 + * + * @fr2_regx: individual register bits + * @fr2_val: full register value + * + */ +union aud_info_frame2 { + struct { + u32 chksum:8; + u32 chnl_cnt:3; + u32 rsvd0:1; + u32 coding_type:4; + u32 smpl_size:2; + u32 smpl_freq:3; + u32 rsvd1:3; + u32 format:8; + } fr2_regx; + u32 fr2_val; +}; + +/** + * union aud_info_frame3 - DIP frame 3 + * + * @fr3_regx: individual register bits + * @fr3_val: full register value + * + */ +union aud_info_frame3 { + struct { + u32 chnl_alloc:8; + u32 rsvd0:3; + u32 lsv:4; + u32 dm_inh:1; + u32 rsvd1:16; + } fr3_regx; + u32 fr3_val; +}; + +enum hdmi_connector_status { + hdmi_connector_status_connected = 1, + hdmi_connector_status_disconnected = 2, + hdmi_connector_status_unknown = 3, +}; + +#define HDMI_AUDIO_UNDERRUN (1UL<<31) +#define HDMI_AUDIO_BUFFER_DONE (1UL<<29) + + +#define PORT_ENABLE (1 << 31) +#define SDVO_AUDIO_ENABLE (1 << 6) + +enum had_caps_list { + HAD_GET_ELD = 1, + HAD_GET_DISPLAY_RATE, + HAD_SET_ENABLE_AUDIO, + HAD_SET_DISABLE_AUDIO, + HAD_SET_ENABLE_AUDIO_INT, + HAD_SET_DISABLE_AUDIO_INT, +}; + +enum had_event_type { + HAD_EVENT_HOT_PLUG = 1, + HAD_EVENT_HOT_UNPLUG, + HAD_EVENT_MODE_CHANGING, + HAD_EVENT_AUDIO_BUFFER_DONE, + HAD_EVENT_AUDIO_BUFFER_UNDERRUN, + HAD_EVENT_QUERY_IS_AUDIO_BUSY, + HAD_EVENT_QUERY_IS_AUDIO_SUSPENDED, +}; + +/* + * HDMI Display Controller Audio Interface + * + */ +typedef int (*had_event_call_back) (enum had_event_type event_type, + void *ctxt_info); + +struct hdmi_audio_registers_ops { + int (*hdmi_audio_get_register_base)(u32 **reg_base, + u32 *config_offset); + int (*hdmi_audio_read_register)(u32 reg_addr, u32 *data); + int (*hdmi_audio_write_register)(u32 reg_addr, u32 data); + int (*hdmi_audio_read_modify)(u32 reg_addr, u32 data, + u32 mask); +}; + +struct hdmi_audio_query_set_ops { + int (*hdmi_audio_get_caps)(enum had_caps_list query_element, + void *capabilties); + int (*hdmi_audio_set_caps)(enum had_caps_list set_element, + void *capabilties); +}; + +struct hdmi_audio_event { + int type; +}; + +struct snd_intel_had_interface { + const char *name; + int (*query)(void *had_data, struct hdmi_audio_event event); + int (*suspend)(void *had_data, struct hdmi_audio_event event); + int (*resume)(void *had_data); +}; + +bool mid_hdmi_audio_is_busy(void *dev); +bool mid_hdmi_audio_suspend(void *dev); +void mid_hdmi_audio_resume(void *dev); +void mid_hdmi_audio_signal_event(enum had_event_type event); +int mid_hdmi_audio_setup( + had_event_call_back audio_callbacks, + struct hdmi_audio_registers_ops *reg_ops, + struct hdmi_audio_query_set_ops *query_ops); +int mid_hdmi_audio_register( + struct snd_intel_had_interface *driver, + void *had_data); + +#endif
Hdmi audio driver based on the child platform device created by gfx driver is implemented. This audio driver is derived from legacy intel hdmi audio driver.
The interfaces for interaction between gfx and audio are updated and the driver implementation updated to derive interrupts in its own address space based on irq chip framework
The changes to calculate sub-period positions was triggered by David Henningsson david.henningsson@canonical.com and is accomodated in this patch
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Jerome Anand jerome.anand@intel.com --- sound/x86/Makefile | 2 + sound/x86/intel_hdmi_audio.c | 1855 ++++++++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_audio.h | 197 ++++ sound/x86/intel_hdmi_audio_if.c | 551 +++++++++++ sound/x86/intel_hdmi_lpe_audio.c | 15 +- 5 files changed, 2614 insertions(+), 6 deletions(-) create mode 100644 sound/x86/intel_hdmi_audio.c create mode 100644 sound/x86/intel_hdmi_audio.h create mode 100644 sound/x86/intel_hdmi_audio_if.c
diff --git a/sound/x86/Makefile b/sound/x86/Makefile index 9b87384..85ea22a 100644 --- a/sound/x86/Makefile +++ b/sound/x86/Makefile @@ -1,4 +1,6 @@ snd-hdmi-lpe-audio-objs += \ + intel_hdmi_audio.o \ + intel_hdmi_audio_if.o \ intel_hdmi_lpe_audio.o
obj-$(CONFIG_HDMI_LPE_AUDIO) += snd-hdmi-lpe-audio.o diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c new file mode 100644 index 0000000..b69521a --- /dev/null +++ b/sound/x86/intel_hdmi_audio.c @@ -0,0 +1,1855 @@ +/* + * intel_hdmi_audio.c - Intel HDMI audio driver + * + * Copyright (C) 2016 Intel Corp + * Authors: Sailaja Bandarupalli sailaja.bandarupalli@intel.com + * Ramesh Babu K V ramesh.babu@intel.com + * Vaibhav Agarwal vaibhav.agarwal@intel.com + * Jerome Anand jerome.anand@intel.com + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * ALSA driver for Intel HDMI audio + */ + +#define pr_fmt(fmt) "had: " fmt + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <asm/cacheflush.h> +#include <sound/pcm.h> +#include <sound/core.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/control.h> +#include <sound/initval.h> +#include "intel_hdmi_audio.h" + +static DEFINE_MUTEX(had_mutex); + +/*standard module options for ALSA. This module supports only one card*/ +static int hdmi_card_index = SNDRV_DEFAULT_IDX1; +static char *hdmi_card_id = SNDRV_DEFAULT_STR1; +static struct snd_intelhad *had_data; + +module_param_named(index, hdmi_card_index, int, 0444); +MODULE_PARM_DESC(index, + "Index value for INTEL Intel HDMI Audio controller."); +module_param_named(id, hdmi_card_id, charp, 0444); +MODULE_PARM_DESC(id, + "ID string for INTEL Intel HDMI Audio controller."); + +/* + * ELD SA bits in the CEA Speaker Allocation data block + */ +static int eld_speaker_allocation_bits[] = { + [0] = FL | FR, + [1] = LFE, + [2] = FC, + [3] = RL | RR, + [4] = RC, + [5] = FLC | FRC, + [6] = RLC | RRC, + /* the following are not defined in ELD yet */ + [7] = 0, +}; + +/* + * This is an ordered list! + * + * The preceding ones have better chances to be selected by + * hdmi_channel_allocation(). + */ +static struct cea_channel_speaker_allocation channel_allocations[] = { +/* channel: 7 6 5 4 3 2 1 0 */ +{ .ca_index = 0x00, .speakers = { 0, 0, 0, 0, 0, 0, FR, FL } }, + /* 2.1 */ +{ .ca_index = 0x01, .speakers = { 0, 0, 0, 0, 0, LFE, FR, FL } }, + /* Dolby Surround */ +{ .ca_index = 0x02, .speakers = { 0, 0, 0, 0, FC, 0, FR, FL } }, + /* surround40 */ +{ .ca_index = 0x08, .speakers = { 0, 0, RR, RL, 0, 0, FR, FL } }, + /* surround41 */ +{ .ca_index = 0x09, .speakers = { 0, 0, RR, RL, 0, LFE, FR, FL } }, + /* surround50 */ +{ .ca_index = 0x0a, .speakers = { 0, 0, RR, RL, FC, 0, FR, FL } }, + /* surround51 */ +{ .ca_index = 0x0b, .speakers = { 0, 0, RR, RL, FC, LFE, FR, FL } }, + /* 6.1 */ +{ .ca_index = 0x0f, .speakers = { 0, RC, RR, RL, FC, LFE, FR, FL } }, + /* surround71 */ +{ .ca_index = 0x13, .speakers = { RRC, RLC, RR, RL, FC, LFE, FR, FL } }, + +{ .ca_index = 0x03, .speakers = { 0, 0, 0, 0, FC, LFE, FR, FL } }, +{ .ca_index = 0x04, .speakers = { 0, 0, 0, RC, 0, 0, FR, FL } }, +{ .ca_index = 0x05, .speakers = { 0, 0, 0, RC, 0, LFE, FR, FL } }, +{ .ca_index = 0x06, .speakers = { 0, 0, 0, RC, FC, 0, FR, FL } }, +{ .ca_index = 0x07, .speakers = { 0, 0, 0, RC, FC, LFE, FR, FL } }, +{ .ca_index = 0x0c, .speakers = { 0, RC, RR, RL, 0, 0, FR, FL } }, +{ .ca_index = 0x0d, .speakers = { 0, RC, RR, RL, 0, LFE, FR, FL } }, +{ .ca_index = 0x0e, .speakers = { 0, RC, RR, RL, FC, 0, FR, FL } }, +{ .ca_index = 0x10, .speakers = { RRC, RLC, RR, RL, 0, 0, FR, FL } }, +{ .ca_index = 0x11, .speakers = { RRC, RLC, RR, RL, 0, LFE, FR, FL } }, +{ .ca_index = 0x12, .speakers = { RRC, RLC, RR, RL, FC, 0, FR, FL } }, +{ .ca_index = 0x14, .speakers = { FRC, FLC, 0, 0, 0, 0, FR, FL } }, +{ .ca_index = 0x15, .speakers = { FRC, FLC, 0, 0, 0, LFE, FR, FL } }, +{ .ca_index = 0x16, .speakers = { FRC, FLC, 0, 0, FC, 0, FR, FL } }, +{ .ca_index = 0x17, .speakers = { FRC, FLC, 0, 0, FC, LFE, FR, FL } }, +{ .ca_index = 0x18, .speakers = { FRC, FLC, 0, RC, 0, 0, FR, FL } }, +{ .ca_index = 0x19, .speakers = { FRC, FLC, 0, RC, 0, LFE, FR, FL } }, +{ .ca_index = 0x1a, .speakers = { FRC, FLC, 0, RC, FC, 0, FR, FL } }, +{ .ca_index = 0x1b, .speakers = { FRC, FLC, 0, RC, FC, LFE, FR, FL } }, +{ .ca_index = 0x1c, .speakers = { FRC, FLC, RR, RL, 0, 0, FR, FL } }, +{ .ca_index = 0x1d, .speakers = { FRC, FLC, RR, RL, 0, LFE, FR, FL } }, +{ .ca_index = 0x1e, .speakers = { FRC, FLC, RR, RL, FC, 0, FR, FL } }, +{ .ca_index = 0x1f, .speakers = { FRC, FLC, RR, RL, FC, LFE, FR, FL } }, +}; + +static struct channel_map_table map_tables[] = { + { SNDRV_CHMAP_FL, 0x00, FL }, + { SNDRV_CHMAP_FR, 0x01, FR }, + { SNDRV_CHMAP_RL, 0x04, RL }, + { SNDRV_CHMAP_RR, 0x05, RR }, + { SNDRV_CHMAP_LFE, 0x02, LFE }, + { SNDRV_CHMAP_FC, 0x03, FC }, + { SNDRV_CHMAP_RLC, 0x06, RLC }, + { SNDRV_CHMAP_RRC, 0x07, RRC }, + {} /* terminator */ +}; + +/* hardware capability structure */ +static const struct snd_pcm_hardware snd_intel_hadstream = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_DOUBLE | + SNDRV_PCM_INFO_MMAP| + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), + .formats = (SNDRV_PCM_FMTBIT_S24 | + SNDRV_PCM_FMTBIT_U24), + .rates = SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000, + .rate_min = HAD_MIN_RATE, + .rate_max = HAD_MAX_RATE, + .channels_min = HAD_MIN_CHANNEL, + .channels_max = HAD_MAX_CHANNEL, + .buffer_bytes_max = HAD_MAX_BUFFER, + .period_bytes_min = HAD_MIN_PERIOD_BYTES, + .period_bytes_max = HAD_MAX_PERIOD_BYTES, + .periods_min = HAD_MIN_PERIODS, + .periods_max = HAD_MAX_PERIODS, + .fifo_size = HAD_FIFO_SIZE, +}; + +/* Register access functions */ + +int had_get_hwstate(struct snd_intelhad *intelhaddata) +{ + /* Check for device presence -SW state */ + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + pr_debug("%s:Device not connected:%d\n", __func__, + intelhaddata->drv_status); + return -ENODEV; + } + + return 0; +} + +int had_get_caps(enum had_caps_list query, void *caps) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->query_ops.hdmi_audio_get_caps(query, + caps); + + return retval; +} + +int had_set_caps(enum had_caps_list set_element, void *caps) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->query_ops.hdmi_audio_set_caps( + set_element, caps); + + return retval; +} + +int had_read_register(u32 offset, u32 *data) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->reg_ops.hdmi_audio_read_register( + offset + intelhaddata->audio_cfg_offset, data); + + return retval; +} + +int had_write_register(u32 offset, u32 data) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->reg_ops.hdmi_audio_write_register( + offset + intelhaddata->audio_cfg_offset, data); + + return retval; +} + +int had_read_modify(u32 offset, u32 data, u32 mask) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->reg_ops.hdmi_audio_read_modify( + offset + intelhaddata->audio_cfg_offset, + data, mask); + + return retval; +} +/** + * function to read-modify + * AUD_CONFIG register on VLV2.The had_read_modify() function should not + * directly be used on VLV2 for updating AUD_CONFIG register. + * This is because: + * Bit6 of AUD_CONFIG register is writeonly due to a silicon bug on VLV2 + * HDMI IP. As a result a read-modify of AUD_CONFIG regiter will always + * clear bit6. AUD_CONFIG[6:4] represents the "channels" field of the + * register. This field should be 1xy binary for configuration with 6 or + * more channels. Read-modify of AUD_CONFIG (Eg. for enabling audio) + * causes the "channels" field to be updated as 0xy binary resulting in + * bad audio. The fix is to always write the AUD_CONFIG[6:4] with + * appropriate value when doing read-modify of AUD_CONFIG register. + * + * @substream: the current substream or NULL if no active substream + * @data : data to be written + * @mask : mask + * + */ +static int had_read_modify_aud_config_v2(struct snd_pcm_substream *substream, + u32 data, u32 mask) +{ + union aud_cfg cfg_val = {.cfg_regval = 0}; + u8 channels; + + /* + * If substream is NULL, there is no active stream. + * In this case just set channels to 2 + */ + if (substream) + channels = substream->runtime->channels; + else + channels = 2; + cfg_val.cfg_regx_v2.num_ch = channels - 2; + + data = data | cfg_val.cfg_regval; + mask = mask | AUD_CONFIG_CH_MASK_V2; + + pr_debug("%s : data = %x, mask =%x\n", __func__, data, mask); + + return had_read_modify(AUD_CONFIG, data, mask); +} + +static void snd_intelhad_enable_audio_v1(struct snd_pcm_substream *substream, + u8 enable) +{ + had_read_modify(AUD_CONFIG, enable, BIT(0)); +} + +static void snd_intelhad_enable_audio_v2(struct snd_pcm_substream *substream, + u8 enable) +{ + had_read_modify_aud_config_v2(substream, enable, BIT(0)); +} + +static void snd_intelhad_reset_audio_v1(u8 reset) +{ + had_write_register(AUD_HDMI_STATUS, reset); +} + +static void snd_intelhad_reset_audio_v2(u8 reset) +{ + had_write_register(AUD_HDMI_STATUS_v2, reset); +} + +/** + * initialize audio channel status registers + * This function is called in the prepare callback + */ +static int had_prog_status_reg(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + union aud_cfg cfg_val = {.cfg_regval = 0}; + union aud_ch_status_0 ch_stat0 = {.status_0_regval = 0}; + union aud_ch_status_1 ch_stat1 = {.status_1_regval = 0}; + int format; + + pr_debug("Entry %s\n", __func__); + + ch_stat0.status_0_regx.lpcm_id = (intelhaddata->aes_bits & + IEC958_AES0_NONAUDIO)>>1; + ch_stat0.status_0_regx.clk_acc = (intelhaddata->aes_bits & + IEC958_AES3_CON_CLOCK)>>4; + cfg_val.cfg_regx.val_bit = ch_stat0.status_0_regx.lpcm_id; + + switch (substream->runtime->rate) { + case AUD_SAMPLE_RATE_32: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_32KHZ; + break; + + case AUD_SAMPLE_RATE_44_1: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_44KHZ; + break; + case AUD_SAMPLE_RATE_48: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_48KHZ; + break; + case AUD_SAMPLE_RATE_88_2: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_88KHZ; + break; + case AUD_SAMPLE_RATE_96: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_96KHZ; + break; + case AUD_SAMPLE_RATE_176_4: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_176KHZ; + break; + case AUD_SAMPLE_RATE_192: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_192KHZ; + break; + + default: + /* control should never come here */ + return -EINVAL; + break; + + } + had_write_register(AUD_CH_STATUS_0, ch_stat0.status_0_regval); + + format = substream->runtime->format; + + if (format == SNDRV_PCM_FORMAT_S16_LE) { + ch_stat1.status_1_regx.max_wrd_len = MAX_SMPL_WIDTH_20; + ch_stat1.status_1_regx.wrd_len = SMPL_WIDTH_16BITS; + } else if (format == SNDRV_PCM_FORMAT_S24_LE) { + ch_stat1.status_1_regx.max_wrd_len = MAX_SMPL_WIDTH_24; + ch_stat1.status_1_regx.wrd_len = SMPL_WIDTH_24BITS; + } else { + ch_stat1.status_1_regx.max_wrd_len = 0; + ch_stat1.status_1_regx.wrd_len = 0; + } + had_write_register(AUD_CH_STATUS_1, ch_stat1.status_1_regval); + return 0; +} + +/** + * function to initialize audio + * registers and buffer confgiuration registers + * This function is called in the prepare callback + */ +static int snd_intelhad_prog_audio_ctrl_v2(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + union aud_cfg cfg_val = {.cfg_regval = 0}; + union aud_buf_config buf_cfg = {.buf_cfgval = 0}; + u8 channels; + + had_prog_status_reg(substream, intelhaddata); + + buf_cfg.buf_cfg_regx_v2.audio_fifo_watermark = FIFO_THRESHOLD; + buf_cfg.buf_cfg_regx_v2.dma_fifo_watermark = DMA_FIFO_THRESHOLD; + buf_cfg.buf_cfg_regx_v2.aud_delay = 0; + had_write_register(AUD_BUF_CONFIG, buf_cfg.buf_cfgval); + + channels = substream->runtime->channels; + cfg_val.cfg_regx_v2.num_ch = channels - 2; + if (channels <= 2) + cfg_val.cfg_regx_v2.layout = LAYOUT0; + else + cfg_val.cfg_regx_v2.layout = LAYOUT1; + + had_write_register(AUD_CONFIG, cfg_val.cfg_regval); + return 0; +} + +/** + * function to initialize audio + * registers and buffer confgiuration registers + * This function is called in the prepare callback + */ +static int snd_intelhad_prog_audio_ctrl_v1(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + union aud_cfg cfg_val = {.cfg_regval = 0}; + union aud_buf_config buf_cfg = {.buf_cfgval = 0}; + u8 channels; + + had_prog_status_reg(substream, intelhaddata); + + buf_cfg.buf_cfg_regx.fifo_width = FIFO_THRESHOLD; + buf_cfg.buf_cfg_regx.aud_delay = 0; + had_write_register(AUD_BUF_CONFIG, buf_cfg.buf_cfgval); + + channels = substream->runtime->channels; + + switch (channels) { + case 1: + case 2: + cfg_val.cfg_regx.num_ch = CH_STEREO; + cfg_val.cfg_regx.layout = LAYOUT0; + break; + + case 3: + case 4: + cfg_val.cfg_regx.num_ch = CH_THREE_FOUR; + cfg_val.cfg_regx.layout = LAYOUT1; + break; + + case 5: + case 6: + cfg_val.cfg_regx.num_ch = CH_FIVE_SIX; + cfg_val.cfg_regx.layout = LAYOUT1; + break; + + case 7: + case 8: + cfg_val.cfg_regx.num_ch = CH_SEVEN_EIGHT; + cfg_val.cfg_regx.layout = LAYOUT1; + break; + + } + + had_write_register(AUD_CONFIG, cfg_val.cfg_regval); + return 0; +} + +/* + * Compute derived values in channel_allocations[]. + */ +static void init_channel_allocations(void) +{ + int i, j; + struct cea_channel_speaker_allocation *p; + + pr_debug("%s: Enter\n", __func__); + + for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) { + p = channel_allocations + i; + p->channels = 0; + p->spk_mask = 0; + for (j = 0; j < ARRAY_SIZE(p->speakers); j++) + if (p->speakers[j]) { + p->channels++; + p->spk_mask |= p->speakers[j]; + } + } +} + +/* + * The transformation takes two steps: + * + * eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask + * spk_mask => (channel_allocations[]) => ai->CA + * + * TODO: it could select the wrong CA from multiple candidates. + */ +static int snd_intelhad_channel_allocation(struct snd_intelhad *intelhaddata, + int channels) +{ + int i; + int ca = 0; + int spk_mask = 0; + + /* + * CA defaults to 0 for basic stereo audio + */ + if (channels <= 2) + return 0; + + /* + * expand ELD's speaker allocation mask + * + * ELD tells the speaker mask in a compact(paired) form, + * expand ELD's notions to match the ones used by Audio InfoFrame. + */ + + for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) { + if (intelhaddata->eeld.speaker_allocation_block & (1 << i)) + spk_mask |= eld_speaker_allocation_bits[i]; + } + + /* search for the first working match in the CA table */ + for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) { + if (channels == channel_allocations[i].channels && + (spk_mask & channel_allocations[i].spk_mask) == + channel_allocations[i].spk_mask) { + ca = channel_allocations[i].ca_index; + break; + } + } + + pr_debug("HDMI: select CA 0x%x for %d\n", ca, channels); + + return ca; +} + +/* from speaker bit mask to ALSA API channel position */ +static int spk_to_chmap(int spk) +{ + struct channel_map_table *t = map_tables; + + for (; t->map; t++) { + if (t->spk_mask == spk) + return t->map; + } + return 0; +} + +void had_build_channel_allocation_map(struct snd_intelhad *intelhaddata) +{ + int i = 0, c = 0; + int spk_mask = 0; + struct snd_pcm_chmap_elem *chmap; + u8 eld_high, eld_high_mask = 0xF0; + u8 high_msb; + + chmap = kzalloc(sizeof(*chmap), GFP_KERNEL); + if (chmap == NULL) { + intelhaddata->chmap->chmap = NULL; + return; + } + + had_get_caps(HAD_GET_ELD, &intelhaddata->eeld); + + pr_debug("eeld.speaker_allocation_block = %x\n", + intelhaddata->eeld.speaker_allocation_block); + + /* WA: Fix the max channel supported to 8 */ + + /* + * Sink may support more than 8 channels, if eld_high has more than + * one bit set. SOC supports max 8 channels. + * Refer eld_speaker_allocation_bits, for sink speaker allocation + */ + + /* if 0x2F < eld < 0x4F fall back to 0x2f, else fall back to 0x4F */ + eld_high = intelhaddata->eeld.speaker_allocation_block & eld_high_mask; + if ((eld_high & (eld_high-1)) && (eld_high > 0x1F)) { + /* eld_high & (eld_high-1): if more than 1 bit set */ + /* 0x1F: 7 channels */ + for (i = 1; i < 4; i++) { + high_msb = eld_high & (0x80 >> i); + if (high_msb) { + intelhaddata->eeld.speaker_allocation_block &= + high_msb | 0xF; + break; + } + } + } + + for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) { + if (intelhaddata->eeld.speaker_allocation_block & (1 << i)) + spk_mask |= eld_speaker_allocation_bits[i]; + } + + for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) { + if (spk_mask == channel_allocations[i].spk_mask) { + for (c = 0; c < channel_allocations[i].channels; c++) { + chmap->map[c] = spk_to_chmap( + channel_allocations[i].speakers[ + (MAX_SPEAKERS - 1)-c]); + } + chmap->channels = channel_allocations[i].channels; + intelhaddata->chmap->chmap = chmap; + break; + } + } + if (i >= ARRAY_SIZE(channel_allocations)) { + intelhaddata->chmap->chmap = NULL; + kfree(chmap); + } +} + +/* + * ALSA API channel-map control callbacks + */ +static int had_chmap_ctl_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol); + struct snd_intelhad *intelhaddata = info->private_data; + + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) + return -ENODEV; + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = HAD_MAX_CHANNEL; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = SNDRV_CHMAP_LAST; + return 0; +} + +static int had_chmap_ctl_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol); + struct snd_intelhad *intelhaddata = info->private_data; + int i = 0; + const struct snd_pcm_chmap_elem *chmap; + + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) + return -ENODEV; + if (intelhaddata->chmap->chmap == NULL) + return -ENODATA; + chmap = intelhaddata->chmap->chmap; + for (i = 0; i < chmap->channels; i++) { + ucontrol->value.integer.value[i] = chmap->map[i]; + pr_debug("chmap->map[%d] = %d\n", i, chmap->map[i]); + } + + return 0; +} + +static int had_register_chmap_ctls(struct snd_intelhad *intelhaddata, + struct snd_pcm *pcm) +{ + int err = 0; + + err = snd_pcm_add_chmap_ctls(pcm, SNDRV_PCM_STREAM_PLAYBACK, + NULL, 0, (unsigned long)intelhaddata, + &intelhaddata->chmap); + if (err < 0) + return err; + + intelhaddata->chmap->private_data = intelhaddata; + intelhaddata->kctl = intelhaddata->chmap->kctl; + intelhaddata->kctl->info = had_chmap_ctl_info; + intelhaddata->kctl->get = had_chmap_ctl_get; + intelhaddata->chmap->chmap = NULL; + return 0; +} + +/** + * snd_intelhad_prog_dip_v1 - to initialize Data Island Packets registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function is called in the prepare callback + */ +static void snd_intelhad_prog_dip_v1(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + int i; + union aud_ctrl_st ctrl_state = {.ctrl_val = 0}; + union aud_info_frame2 frame2 = {.fr2_val = 0}; + union aud_info_frame3 frame3 = {.fr3_val = 0}; + u8 checksum = 0; + int channels; + + channels = substream->runtime->channels; + + had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val); + + frame2.fr2_regx.chnl_cnt = substream->runtime->channels - 1; + + frame3.fr3_regx.chnl_alloc = snd_intelhad_channel_allocation( + intelhaddata, channels); + + /*Calculte the byte wide checksum for all valid DIP words*/ + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (INFO_FRAME_WORD1 >> i*BITS_PER_BYTE) & MASK_BYTE0; + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (frame2.fr2_val >> i*BITS_PER_BYTE) & MASK_BYTE0; + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (frame3.fr3_val >> i*BITS_PER_BYTE) & MASK_BYTE0; + + frame2.fr2_regx.chksum = -(checksum); + + had_write_register(AUD_HDMIW_INFOFR, INFO_FRAME_WORD1); + had_write_register(AUD_HDMIW_INFOFR, frame2.fr2_val); + had_write_register(AUD_HDMIW_INFOFR, frame3.fr3_val); + + /* program remaining DIP words with zero */ + for (i = 0; i < HAD_MAX_DIP_WORDS-VALID_DIP_WORDS; i++) + had_write_register(AUD_HDMIW_INFOFR, 0x0); + + ctrl_state.ctrl_regx.dip_freq = 1; + ctrl_state.ctrl_regx.dip_en_sta = 1; + had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val); +} + +/** + * snd_intelhad_prog_dip_v2 - to initialize Data Island Packets registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function is called in the prepare callback + */ +static void snd_intelhad_prog_dip_v2(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + int i; + union aud_ctrl_st ctrl_state = {.ctrl_val = 0}; + union aud_info_frame2 frame2 = {.fr2_val = 0}; + union aud_info_frame3 frame3 = {.fr3_val = 0}; + u8 checksum = 0; + int channels; + + channels = substream->runtime->channels; + + had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val); + + frame2.fr2_regx.chnl_cnt = substream->runtime->channels - 1; + + frame3.fr3_regx.chnl_alloc = snd_intelhad_channel_allocation( + intelhaddata, channels); + + /*Calculte the byte wide checksum for all valid DIP words*/ + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (INFO_FRAME_WORD1 >> i*BITS_PER_BYTE) & MASK_BYTE0; + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (frame2.fr2_val >> i*BITS_PER_BYTE) & MASK_BYTE0; + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (frame3.fr3_val >> i*BITS_PER_BYTE) & MASK_BYTE0; + + frame2.fr2_regx.chksum = -(checksum); + + had_write_register(AUD_HDMIW_INFOFR_v2, INFO_FRAME_WORD1); + had_write_register(AUD_HDMIW_INFOFR_v2, frame2.fr2_val); + had_write_register(AUD_HDMIW_INFOFR_v2, frame3.fr3_val); + + /* program remaining DIP words with zero */ + for (i = 0; i < HAD_MAX_DIP_WORDS-VALID_DIP_WORDS; i++) + had_write_register(AUD_HDMIW_INFOFR_v2, 0x0); + + ctrl_state.ctrl_regx.dip_freq = 1; + ctrl_state.ctrl_regx.dip_en_sta = 1; + had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val); +} + +/** + * snd_intelhad_prog_buffer - programs buffer + * address and length registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function programs ring buffer address and length into registers. + */ +int snd_intelhad_prog_buffer(struct snd_intelhad *intelhaddata, + int start, int end) +{ + u32 ring_buf_addr, ring_buf_size, period_bytes; + u8 i, num_periods; + struct snd_pcm_substream *substream; + + substream = intelhaddata->stream_info.had_substream; + if (!substream) { + pr_err("substream is NULL\n"); + dump_stack(); + return 0; + } + + ring_buf_addr = substream->runtime->dma_addr; + ring_buf_size = snd_pcm_lib_buffer_bytes(substream); + intelhaddata->stream_info.ring_buf_size = ring_buf_size; + period_bytes = frames_to_bytes(substream->runtime, + substream->runtime->period_size); + num_periods = substream->runtime->periods; + + /* + * buffer addr should be 64 byte aligned, period bytes + * will be used to calculate addr offset + */ + period_bytes &= ~0x3F; + + /* Hardware supports MAX_PERIODS buffers */ + if (end >= HAD_MAX_PERIODS) + return -EINVAL; + + for (i = start; i <= end; i++) { + /* Program the buf registers with addr and len */ + intelhaddata->buf_info[i].buf_addr = ring_buf_addr + + (i * period_bytes); + if (i < num_periods-1) + intelhaddata->buf_info[i].buf_size = period_bytes; + else + intelhaddata->buf_info[i].buf_size = ring_buf_size - + (period_bytes*i); + + had_write_register(AUD_BUF_A_ADDR + (i * HAD_REG_WIDTH), + intelhaddata->buf_info[i].buf_addr | + BIT(0) | BIT(1)); + had_write_register(AUD_BUF_A_LENGTH + (i * HAD_REG_WIDTH), + period_bytes); + intelhaddata->buf_info[i].is_valid = true; + } + pr_debug("%s:buf[%d-%d] addr=%#x and size=%d\n", __func__, start, end, + intelhaddata->buf_info[start].buf_addr, + intelhaddata->buf_info[start].buf_size); + intelhaddata->valid_buf_cnt = num_periods; + return 0; +} + +int snd_intelhad_read_len(struct snd_intelhad *intelhaddata) +{ + int i, retval = 0; + u32 len[4]; + + for (i = 0; i < 4 ; i++) { + had_read_register(AUD_BUF_A_LENGTH + (i * HAD_REG_WIDTH), + &len[i]); + if (!len[i]) + retval++; + } + if (retval != 1) { + for (i = 0; i < 4 ; i++) + pr_debug("buf[%d] size=%d\n", i, len[i]); + } + + return retval; +} + +/** + * snd_intelhad_prog_cts_v1 - Program HDMI audio CTS value + * + * @aud_samp_freq: sampling frequency of audio data + * @tmds: sampling frequency of the display data + * @n_param: N value, depends on aud_samp_freq + * @intelhaddata:substream private data + * + * Program CTS register based on the audio and display sampling frequency + */ +static void snd_intelhad_prog_cts_v1(u32 aud_samp_freq, u32 tmds, u32 n_param, + struct snd_intelhad *intelhaddata) +{ + u32 cts_val; + u64 dividend, divisor; + + /* Calculate CTS according to HDMI 1.3a spec*/ + dividend = (u64)tmds * n_param*1000; + divisor = 128 * aud_samp_freq; + cts_val = div64_u64(dividend, divisor); + pr_debug("TMDS value=%d, N value=%d, CTS Value=%d\n", + tmds, n_param, cts_val); + had_write_register(AUD_HDMI_CTS, (BIT(20) | cts_val)); +} + +/** + * snd_intelhad_prog_cts_v2 - Program HDMI audio CTS value + * + * @aud_samp_freq: sampling frequency of audio data + * @tmds: sampling frequency of the display data + * @n_param: N value, depends on aud_samp_freq + * @intelhaddata:substream private data + * + * Program CTS register based on the audio and display sampling frequency + */ +static void snd_intelhad_prog_cts_v2(u32 aud_samp_freq, u32 tmds, u32 n_param, + struct snd_intelhad *intelhaddata) +{ + u32 cts_val; + u64 dividend, divisor; + + /* Calculate CTS according to HDMI 1.3a spec*/ + dividend = (u64)tmds * n_param*1000; + divisor = 128 * aud_samp_freq; + cts_val = div64_u64(dividend, divisor); + pr_debug("TMDS value=%d, N value=%d, CTS Value=%d\n", + tmds, n_param, cts_val); + had_write_register(AUD_HDMI_CTS, (BIT(24) | cts_val)); +} + +static int had_calculate_n_value(u32 aud_samp_freq) +{ + s32 n_val; + + /* Select N according to HDMI 1.3a spec*/ + switch (aud_samp_freq) { + case AUD_SAMPLE_RATE_32: + n_val = 4096; + break; + + case AUD_SAMPLE_RATE_44_1: + n_val = 6272; + break; + + case AUD_SAMPLE_RATE_48: + n_val = 6144; + break; + + case AUD_SAMPLE_RATE_88_2: + n_val = 12544; + break; + + case AUD_SAMPLE_RATE_96: + n_val = 12288; + break; + + case AUD_SAMPLE_RATE_176_4: + n_val = 25088; + break; + + case HAD_MAX_RATE: + n_val = 24576; + break; + + default: + n_val = -EINVAL; + break; + } + return n_val; +} + +/** + * snd_intelhad_prog_n_v1 - Program HDMI audio N value + * + * @aud_samp_freq: sampling frequency of audio data + * @n_param: N value, depends on aud_samp_freq + * @intelhaddata:substream private data + * + * This function is called in the prepare callback. + * It programs based on the audio and display sampling frequency + */ +static int snd_intelhad_prog_n_v1(u32 aud_samp_freq, u32 *n_param, + struct snd_intelhad *intelhaddata) +{ + s32 n_val; + + n_val = had_calculate_n_value(aud_samp_freq); + + if (n_val < 0) + return n_val; + + had_write_register(AUD_N_ENABLE, (BIT(20) | n_val)); + *n_param = n_val; + return 0; +} + +/** + * snd_intelhad_prog_n_v2 - Program HDMI audio N value + * + * @aud_samp_freq: sampling frequency of audio data + * @n_param: N value, depends on aud_samp_freq + * @intelhaddata:substream private data + * + * This function is called in the prepare callback. + * It programs based on the audio and display sampling frequency + */ +static int snd_intelhad_prog_n_v2(u32 aud_samp_freq, u32 *n_param, + struct snd_intelhad *intelhaddata) +{ + s32 n_val; + + n_val = had_calculate_n_value(aud_samp_freq); + + if (n_val < 0) + return n_val; + + had_write_register(AUD_N_ENABLE, (BIT(24) | n_val)); + *n_param = n_val; + return 0; +} + +static void had_clear_underrun_intr_v1(struct snd_intelhad *intelhaddata) +{ + u32 hdmi_status, i = 0; + + /* Handle Underrun interrupt within Audio Unit */ + had_write_register(AUD_CONFIG, 0); + /* Reset buffer pointers */ + had_write_register(AUD_HDMI_STATUS, 1); + had_write_register(AUD_HDMI_STATUS, 0); + /** + * The interrupt status 'sticky' bits might not be cleared by + * setting '1' to that bit once... + */ + do { /* clear bit30, 31 AUD_HDMI_STATUS */ + had_read_register(AUD_HDMI_STATUS, &hdmi_status); + pr_debug("HDMI status =0x%x\n", hdmi_status); + if (hdmi_status & AUD_CONFIG_MASK_UNDERRUN) { + i++; + hdmi_status &= (AUD_CONFIG_MASK_SRDBG | + AUD_CONFIG_MASK_FUNCRST); + hdmi_status |= ~AUD_CONFIG_MASK_UNDERRUN; + had_write_register(AUD_HDMI_STATUS, hdmi_status); + } else + break; + } while (i < MAX_CNT); + if (i >= MAX_CNT) + pr_err("Unable to clear UNDERRUN bits\n"); +} + +static void had_clear_underrun_intr_v2(struct snd_intelhad *intelhaddata) +{ + u32 hdmi_status, i = 0; + + /* Handle Underrun interrupt within Audio Unit */ + had_write_register(AUD_CONFIG, 0); + /* Reset buffer pointers */ + had_write_register(AUD_HDMI_STATUS_v2, 1); + had_write_register(AUD_HDMI_STATUS_v2, 0); + /** + * The interrupt status 'sticky' bits might not be cleared by + * setting '1' to that bit once... + */ + do { /* clear bit30, 31 AUD_HDMI_STATUS */ + had_read_register(AUD_HDMI_STATUS_v2, &hdmi_status); + pr_debug("HDMI status =0x%x\n", hdmi_status); + if (hdmi_status & AUD_CONFIG_MASK_UNDERRUN) { + i++; + had_write_register(AUD_HDMI_STATUS_v2, hdmi_status); + } else + break; + } while (i < MAX_CNT); + if (i >= MAX_CNT) + pr_err("Unable to clear UNDERRUN bits\n"); +} + +/** + * snd_intelhad_open - stream initializations are done here + * @substream:substream for which the stream function is called + * + * This function is called whenever a PCM stream is opened + */ +static int snd_intelhad_open(struct snd_pcm_substream *substream) +{ + struct snd_intelhad *intelhaddata; + struct snd_pcm_runtime *runtime; + struct had_stream_pvt *stream; + struct had_pvt_data *had_stream; + int retval; + + pr_debug("snd_intelhad_open called\n"); + intelhaddata = snd_pcm_substream_chip(substream); + had_stream = intelhaddata->private_data; + runtime = substream->runtime; + + pm_runtime_get(intelhaddata->dev); + + if (had_get_hwstate(intelhaddata)) { + pr_err("%s: HDMI cable plugged-out\n", __func__); + retval = -ENODEV; + goto exit_put_handle; + } + + /* Check, if device already in use */ + if (runtime->private_data) { + pr_err("Device already in use\n"); + retval = -EBUSY; + goto exit_put_handle; + } + + /* set the runtime hw parameter with local snd_pcm_hardware struct */ + runtime->hw = snd_intel_hadstream; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) { + retval = -ENOMEM; + goto exit_put_handle; + } + stream->stream_status = STREAM_INIT; + runtime->private_data = stream; + + retval = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (retval < 0) + goto exit_err; + + /* Make sure, that the period size is always aligned + * 64byte boundary + */ + retval = snd_pcm_hw_constraint_step(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64); + if (retval < 0) { + pr_err("%s:step_size=64 failed,err=%d\n", __func__, retval); + goto exit_err; + } + + return retval; +exit_err: + kfree(stream); +exit_put_handle: + pm_runtime_put(intelhaddata->dev); + runtime->private_data = NULL; + return retval; +} + +/** + * had_period_elapsed - updates the hardware pointer status + * @had_substream:substream for which the stream function is called + * + */ +static void had_period_elapsed(void *had_substream) +{ + struct snd_pcm_substream *substream = had_substream; + struct had_stream_pvt *stream; + + /* pr_debug("had_period_elapsed called\n"); */ + + if (!substream || !substream->runtime) + return; + stream = substream->runtime->private_data; + if (!stream) + return; + + if (stream->stream_status != STREAM_RUNNING) + return; + snd_pcm_period_elapsed(substream); +} + +/** + * snd_intelhad_init_stream - internal function to initialize stream info + * @substream:substream for which the stream function is called + * + */ +static int snd_intelhad_init_stream(struct snd_pcm_substream *substream) +{ + struct snd_intelhad *intelhaddata = snd_pcm_substream_chip(substream); + + pr_debug("snd_intelhad_init_stream called\n"); + + pr_debug("setting buffer ptr param\n"); + intelhaddata->stream_info.period_elapsed = had_period_elapsed; + intelhaddata->stream_info.had_substream = substream; + intelhaddata->stream_info.buffer_ptr = 0; + intelhaddata->stream_info.buffer_rendered = 0; + intelhaddata->stream_info.sfreq = substream->runtime->rate; + return 0; +} + +/** + * snd_intelhad_close- to free parameteres when stream is stopped + * + * @substream: substream for which the function is called + * + * This function is called by ALSA framework when stream is stopped + */ +static int snd_intelhad_close(struct snd_pcm_substream *substream) +{ + struct snd_intelhad *intelhaddata; + struct snd_pcm_runtime *runtime; + + pr_debug("snd_intelhad_close called\n"); + + intelhaddata = snd_pcm_substream_chip(substream); + runtime = substream->runtime; + + if (!runtime->private_data) { + pr_debug("close() might have called after failed open"); + return 0; + } + + intelhaddata->stream_info.buffer_rendered = 0; + intelhaddata->stream_info.buffer_ptr = 0; + intelhaddata->stream_info.str_id = 0; + intelhaddata->stream_info.had_substream = NULL; + + /* Check if following drv_status modification is required - VA */ + if (intelhaddata->drv_status != HAD_DRV_DISCONNECTED) { + intelhaddata->drv_status = HAD_DRV_CONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_CONNECTED\n", + __func__, __LINE__); + } + kfree(runtime->private_data); + runtime->private_data = NULL; + pm_runtime_put(intelhaddata->dev); + return 0; +} + +/** + * snd_intelhad_hw_params- to setup the hardware parameters + * like allocating the buffers + * + * @substream: substream for which the function is called + * @hw_params: hardware parameters + * + * This function is called by ALSA framework when hardware params are set + */ +static int snd_intelhad_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + unsigned long addr; + int pages, buf_size, retval; + + pr_debug("snd_intelhad_hw_params called\n"); + + if (!hw_params) + return -EINVAL; + + buf_size = params_buffer_bytes(hw_params); + retval = snd_pcm_lib_malloc_pages(substream, buf_size); + if (retval < 0) + return retval; + pr_debug("%s:allocated memory = %d\n", __func__, buf_size); + /* mark the pages as uncached region */ + addr = (unsigned long) substream->runtime->dma_area; + pages = (substream->runtime->dma_bytes + PAGE_SIZE - 1) / PAGE_SIZE; + retval = set_memory_uc(addr, pages); + if (retval) { + pr_err("set_memory_uc failed.Error:%d\n", retval); + return retval; + } + memset(substream->runtime->dma_area, 0, buf_size); + + return retval; +} + +/** + * snd_intelhad_hw_free- to release the resources allocated during + * hardware params setup + * + * @substream: substream for which the function is called + * + * This function is called by ALSA framework before close callback. + * + */ +static int snd_intelhad_hw_free(struct snd_pcm_substream *substream) +{ + unsigned long addr; + u32 pages; + + pr_debug("snd_intelhad_hw_free called\n"); + + /* mark back the pages as cached/writeback region before the free */ + if (substream->runtime->dma_area != NULL) { + addr = (unsigned long) substream->runtime->dma_area; + pages = (substream->runtime->dma_bytes + PAGE_SIZE - 1) / + PAGE_SIZE; + set_memory_wb(addr, pages); + return snd_pcm_lib_free_pages(substream); + } + return 0; +} + +/** + * snd_intelhad_pcm_trigger - stream activities are handled here + * @substream:substream for which the stream function is called + * @cmd:the stream commamd thats requested from upper layer + * This function is called whenever an a stream activity is invoked + */ +static int snd_intelhad_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + int caps, retval = 0; + unsigned long flag_irq; + struct snd_intelhad *intelhaddata; + struct had_stream_pvt *stream; + struct had_pvt_data *had_stream; + + pr_debug("snd_intelhad_pcm_trigger called\n"); + + intelhaddata = snd_pcm_substream_chip(substream); + stream = substream->runtime->private_data; + had_stream = intelhaddata->private_data; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + pr_debug("Trigger Start\n"); + + /* Disable local INTRs till register prgmng is done */ + if (had_get_hwstate(intelhaddata)) { + pr_err("_START: HDMI cable plugged-out\n"); + retval = -ENODEV; + break; + } + stream->stream_status = STREAM_RUNNING; + + had_stream->stream_type = HAD_RUNNING_STREAM; + + /* Enable Audio */ + /* + * ToDo: Need to enable UNDERRUN interrupts as well + * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + */ + caps = HDMI_AUDIO_BUFFER_DONE; + retval = had_set_caps(HAD_SET_ENABLE_AUDIO_INT, &caps); + retval = had_set_caps(HAD_SET_ENABLE_AUDIO, NULL); + intelhaddata->ops->enable_audio(substream, 1); + + pr_debug("Processed _Start\n"); + + break; + + case SNDRV_PCM_TRIGGER_STOP: + pr_debug("Trigger Stop\n"); + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irq); + intelhaddata->stream_info.str_id = 0; + intelhaddata->curr_buf = 0; + + /* Stop reporting BUFFER_DONE/UNDERRUN to above layers*/ + + had_stream->stream_type = HAD_INIT; + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irq); + /* Disable Audio */ + /* + * ToDo: Need to disable UNDERRUN interrupts as well + * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + */ + caps = HDMI_AUDIO_BUFFER_DONE; + had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps); + intelhaddata->ops->enable_audio(substream, 0); + /* Reset buffer pointers */ + intelhaddata->ops->reset_audio(1); + intelhaddata->ops->reset_audio(0); + stream->stream_status = STREAM_DROPPED; + had_set_caps(HAD_SET_DISABLE_AUDIO, NULL); + break; + + default: + retval = -EINVAL; + } + return retval; +} + +/** + * snd_intelhad_pcm_prepare- internal preparation before starting a stream + * + * @substream: substream for which the function is called + * + * This function is called when a stream is started for internal preparation. + */ +static int snd_intelhad_pcm_prepare(struct snd_pcm_substream *substream) +{ + int retval; + u32 disp_samp_freq, n_param; + struct snd_intelhad *intelhaddata; + struct snd_pcm_runtime *runtime; + struct had_pvt_data *had_stream; + + pr_debug("snd_intelhad_pcm_prepare called\n"); + + intelhaddata = snd_pcm_substream_chip(substream); + runtime = substream->runtime; + had_stream = intelhaddata->private_data; + + if (had_get_hwstate(intelhaddata)) { + pr_err("%s: HDMI cable plugged-out\n", __func__); + retval = -ENODEV; + goto prep_end; + } + + pr_debug("period_size=%d\n", + (int)frames_to_bytes(runtime, runtime->period_size)); + pr_debug("periods=%d\n", runtime->periods); + pr_debug("buffer_size=%d\n", (int)snd_pcm_lib_buffer_bytes(substream)); + pr_debug("rate=%d\n", runtime->rate); + pr_debug("channels=%d\n", runtime->channels); + + if (intelhaddata->stream_info.str_id) { + pr_debug("_prepare is called for existing str_id#%d\n", + intelhaddata->stream_info.str_id); + retval = snd_intelhad_pcm_trigger(substream, + SNDRV_PCM_TRIGGER_STOP); + return retval; + } + + retval = snd_intelhad_init_stream(substream); + if (retval) + goto prep_end; + + + /* Get N value in KHz */ + retval = had_get_caps(HAD_GET_DISPLAY_RATE, &disp_samp_freq); + if (retval) { + pr_err("querying display sampling freq failed %#x\n", retval); + goto prep_end; + } + + had_get_caps(HAD_GET_ELD, &intelhaddata->eeld); + + retval = intelhaddata->ops->prog_n(substream->runtime->rate, &n_param, + intelhaddata); + if (retval) { + pr_err("programming N value failed %#x\n", retval); + goto prep_end; + } + intelhaddata->ops->prog_cts(substream->runtime->rate, + disp_samp_freq, n_param, intelhaddata); + + intelhaddata->ops->prog_dip(substream, intelhaddata); + + retval = intelhaddata->ops->audio_ctrl(substream, intelhaddata); + + /* Prog buffer address */ + retval = snd_intelhad_prog_buffer(intelhaddata, + HAD_BUF_TYPE_A, HAD_BUF_TYPE_D); + + /* + * Program channel mapping in following order: + * FL, FR, C, LFE, RL, RR + */ + + had_write_register(AUD_BUF_CH_SWAP, SWAP_LFE_CENTER); + +prep_end: + return retval; +} + +/** + * snd_intelhad_pcm_pointer- to send the current buffer pointerprocessed by hw + * + * @substream: substream for which the function is called + * + * This function is called by ALSA framework to get the current hw buffer ptr + * when a period is elapsed + */ +static snd_pcm_uframes_t snd_intelhad_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_intelhad *intelhaddata; + u32 bytes_rendered = 0; + u32 t; + int buf_id; + + /* pr_debug("snd_intelhad_pcm_pointer called\n"); */ + + intelhaddata = snd_pcm_substream_chip(substream); + + if (intelhaddata->flag_underrun) { + intelhaddata->flag_underrun = 0; + return SNDRV_PCM_POS_XRUN; + } + + /* Use a hw register to calculate sub-period position reports. + * This makes PulseAudio happier. + */ + + buf_id = intelhaddata->curr_buf % 4; + had_read_register(AUD_BUF_A_LENGTH + (buf_id * HAD_REG_WIDTH), &t); + if (t == 0) { + pr_debug("discovered buffer done for buf %d\n", buf_id); + /* had_process_buffer_done(intelhaddata); */ + } + t = intelhaddata->buf_info[buf_id].buf_size - t; + + if (intelhaddata->stream_info.buffer_rendered) + div_u64_rem(intelhaddata->stream_info.buffer_rendered, + intelhaddata->stream_info.ring_buf_size, + &(bytes_rendered)); + + intelhaddata->stream_info.buffer_ptr = bytes_to_frames( + substream->runtime, + bytes_rendered + t); + return intelhaddata->stream_info.buffer_ptr; +} + +/** + * snd_intelhad_pcm_mmap- mmaps a kernel buffer to user space for copying data + * + * @substream: substream for which the function is called + * @vma: struct instance of memory VMM memory area + * + * This function is called by OS when a user space component + * tries to get mmap memory from driver + */ +static int snd_intelhad_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + + pr_debug("snd_intelhad_pcm_mmap called\n"); + + pr_debug("entry with prot:%s\n", __func__); + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +int hdmi_audio_mode_change(struct snd_pcm_substream *substream) +{ + int retval = 0; + u32 disp_samp_freq, n_param; + struct snd_intelhad *intelhaddata; + + intelhaddata = snd_pcm_substream_chip(substream); + + /* Disable Audio */ + intelhaddata->ops->enable_audio(substream, 0); + + /* Update CTS value */ + retval = had_get_caps(HAD_GET_DISPLAY_RATE, &disp_samp_freq); + if (retval) { + pr_err("querying display sampling freq failed %#x\n", retval); + goto out; + } + + retval = intelhaddata->ops->prog_n(substream->runtime->rate, &n_param, + intelhaddata); + if (retval) { + pr_err("programming N value failed %#x\n", retval); + goto out; + } + intelhaddata->ops->prog_cts(substream->runtime->rate, + disp_samp_freq, n_param, intelhaddata); + + /* Enable Audio */ + intelhaddata->ops->enable_audio(substream, 1); + +out: + return retval; +} + +/*PCM operations structure and the calls back for the same */ +struct snd_pcm_ops snd_intelhad_playback_ops = { + .open = snd_intelhad_open, + .close = snd_intelhad_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_intelhad_hw_params, + .hw_free = snd_intelhad_hw_free, + .prepare = snd_intelhad_pcm_prepare, + .trigger = snd_intelhad_pcm_trigger, + .pointer = snd_intelhad_pcm_pointer, + .mmap = snd_intelhad_pcm_mmap, +}; + +/** + * snd_intelhad_create - to crete alsa card instance + * + * @intelhaddata: pointer to internal context + * @card: pointer to card + * + * This function is called when the hdmi cable is plugged in + */ +static int snd_intelhad_create( + struct snd_intelhad *intelhaddata, + struct snd_card *card) +{ + int retval; + static struct snd_device_ops ops = { + }; + + pr_debug("snd_intelhad_create called\n"); + + if (!intelhaddata) + return -EINVAL; + + /* ALSA api to register the device */ + retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, intelhaddata, &ops); + return retval; +} +/** + * snd_intelhad_pcm_free - to free the memory allocated + * + * @pcm: pointer to pcm instance + * This function is called when the device is removed + */ +static void snd_intelhad_pcm_free(struct snd_pcm *pcm) +{ + pr_debug("Freeing PCM preallocated pages\n"); + snd_pcm_lib_preallocate_free_for_all(pcm); +} + +static int had_iec958_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + return 0; +} + +static int had_iec958_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_intelhad *intelhaddata = snd_kcontrol_chip(kcontrol); + + ucontrol->value.iec958.status[0] = (intelhaddata->aes_bits >> 0) & 0xff; + ucontrol->value.iec958.status[1] = (intelhaddata->aes_bits >> 8) & 0xff; + ucontrol->value.iec958.status[2] = + (intelhaddata->aes_bits >> 16) & 0xff; + ucontrol->value.iec958.status[3] = + (intelhaddata->aes_bits >> 24) & 0xff; + return 0; +} +static int had_iec958_mask_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.iec958.status[0] = 0xff; + ucontrol->value.iec958.status[1] = 0xff; + ucontrol->value.iec958.status[2] = 0xff; + ucontrol->value.iec958.status[3] = 0xff; + return 0; +} +static int had_iec958_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + unsigned int val; + struct snd_intelhad *intelhaddata = snd_kcontrol_chip(kcontrol); + + pr_debug("entered had_iec958_put\n"); + val = (ucontrol->value.iec958.status[0] << 0) | + (ucontrol->value.iec958.status[1] << 8) | + (ucontrol->value.iec958.status[2] << 16) | + (ucontrol->value.iec958.status[3] << 24); + if (intelhaddata->aes_bits != val) { + intelhaddata->aes_bits = val; + return 1; + } + return 1; +} + +static struct snd_kcontrol_new had_control_iec958_mask = { + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK), + .info = had_iec958_info, /* shared */ + .get = had_iec958_mask_get, +}; + +static struct snd_kcontrol_new had_control_iec958 = { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), + .info = had_iec958_info, + .get = had_iec958_get, + .put = had_iec958_put +}; + +static struct snd_intel_had_interface had_interface = { + .name = "hdmi-audio", + .query = hdmi_audio_query, + .suspend = hdmi_audio_suspend, + .resume = hdmi_audio_resume, +}; + +static struct had_ops had_ops_v1 = { + .enable_audio = snd_intelhad_enable_audio_v1, + .reset_audio = snd_intelhad_reset_audio_v1, + .prog_n = snd_intelhad_prog_n_v1, + .prog_cts = snd_intelhad_prog_cts_v1, + .audio_ctrl = snd_intelhad_prog_audio_ctrl_v1, + .prog_dip = snd_intelhad_prog_dip_v1, + .handle_underrun = had_clear_underrun_intr_v1, +}; + +static struct had_ops had_ops_v2 = { + .enable_audio = snd_intelhad_enable_audio_v2, + .reset_audio = snd_intelhad_reset_audio_v2, + .prog_n = snd_intelhad_prog_n_v2, + .prog_cts = snd_intelhad_prog_cts_v2, + .audio_ctrl = snd_intelhad_prog_audio_ctrl_v2, + .prog_dip = snd_intelhad_prog_dip_v2, + .handle_underrun = had_clear_underrun_intr_v2, +}; +/** + * hdmi_audio_probe - to create sound card instance for HDMI audio playabck + * + *@haddata: pointer to HAD private data + *@card_id: card for which probe is called + * + * This function is called when the hdmi cable is plugged in. This function + * creates and registers the sound card with ALSA + */ +int hdmi_audio_probe(void *deviceptr) +{ + int retval; + struct snd_pcm *pcm; + struct snd_card *card; + struct had_callback_ops ops_cb; + struct snd_intelhad *intelhaddata; + struct had_pvt_data *had_stream; + struct platform_device *devptr = deviceptr; + + pr_debug("Enter %s\n", __func__); + + pr_debug("hdmi_audio_probe dma_mask: %p\n", devptr->dev.dma_mask); + + /* allocate memory for saving internal context and working */ + intelhaddata = kzalloc(sizeof(*intelhaddata), GFP_KERNEL); + if (!intelhaddata) + return -ENOMEM; + + had_stream = kzalloc(sizeof(*had_stream), GFP_KERNEL); + if (!had_stream) { + retval = -ENOMEM; + goto free_haddata; + } + + had_data = intelhaddata; + ops_cb.intel_had_event_call_back = had_event_handler; + + /* registering with display driver to get access to display APIs */ + + retval = mid_hdmi_audio_setup( + ops_cb.intel_had_event_call_back, + &(intelhaddata->reg_ops), + &(intelhaddata->query_ops)); + if (retval) { + pr_err("querying display driver APIs failed %#x\n", retval); + goto free_hadstream; + } + mutex_lock(&had_mutex); + spin_lock_init(&intelhaddata->had_spinlock); + intelhaddata->drv_status = HAD_DRV_DISCONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n", + __func__, __LINE__); + + /* create a card instance with ALSA framework */ + retval = snd_card_new(&devptr->dev, hdmi_card_index, hdmi_card_id, + THIS_MODULE, 0, &card); + + if (retval) + goto unlock_mutex; + intelhaddata->card = card; + intelhaddata->card_id = hdmi_card_id; + intelhaddata->card_index = card->number; + intelhaddata->private_data = had_stream; + intelhaddata->flag_underrun = 0; + intelhaddata->aes_bits = SNDRV_PCM_DEFAULT_CON_SPDIF; + strncpy(card->driver, INTEL_HAD, strlen(INTEL_HAD)); + strncpy(card->shortname, INTEL_HAD, strlen(INTEL_HAD)); + + retval = snd_pcm_new(card, INTEL_HAD, PCM_INDEX, MAX_PB_STREAMS, + MAX_CAP_STREAMS, &pcm); + if (retval) + goto err; + + /* setup private data which can be retrieved when required */ + pcm->private_data = intelhaddata; + pcm->private_free = snd_intelhad_pcm_free; + pcm->info_flags = 0; + strncpy(pcm->name, card->shortname, strlen(card->shortname)); + /* setup the ops for palyabck */ + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, + &snd_intelhad_playback_ops); + /* allocate dma pages for ALSA stream operations + * memory allocated is based on size, not max value + * thus using same argument for max & size + */ + retval = snd_pcm_lib_preallocate_pages_for_all(pcm, + SNDRV_DMA_TYPE_DEV, NULL, + HAD_MAX_BUFFER, HAD_MAX_BUFFER); + + if (card->dev == NULL) + pr_debug("card->dev is NULL!!!!! Should not be this case\n"); + else if (card->dev->dma_mask == NULL) + pr_debug("hdmi_audio_probe dma_mask is NULL!!!!!\n"); + else + pr_debug("hdmi_audio_probe dma_mask is : %p\n", + card->dev->dma_mask); + + if (retval) + goto err; + + /* internal function call to register device with ALSA */ + retval = snd_intelhad_create(intelhaddata, card); + if (retval) + goto err; + + card->private_data = &intelhaddata; + retval = snd_card_register(card); + if (retval) + goto err; + + /* IEC958 controls */ + retval = snd_ctl_add(card, snd_ctl_new1(&had_control_iec958_mask, + intelhaddata)); + if (retval < 0) + goto err; + retval = snd_ctl_add(card, snd_ctl_new1(&had_control_iec958, + intelhaddata)); + if (retval < 0) + goto err; + + init_channel_allocations(); + + /* Register channel map controls */ + retval = had_register_chmap_ctls(intelhaddata, pcm); + if (retval < 0) + goto err; + + intelhaddata->dev = &devptr->dev; + pm_runtime_set_active(intelhaddata->dev); + pm_runtime_enable(intelhaddata->dev); + + mutex_unlock(&had_mutex); + retval = mid_hdmi_audio_register(&had_interface, intelhaddata); + if (retval) { + pr_err("registering with display driver failed %#x\n", retval); + snd_card_free(card); + goto free_hadstream; + } + + intelhaddata->hw_silence = 1; + had_ops_v1 = had_ops_v1; /* unused */ + intelhaddata->ops = &had_ops_v2; + + return retval; +err: + snd_card_free(card); +unlock_mutex: + mutex_unlock(&had_mutex); +free_hadstream: + kfree(had_stream); + pm_runtime_disable(intelhaddata->dev); + intelhaddata->dev = NULL; +free_haddata: + kfree(intelhaddata); + intelhaddata = NULL; + pr_err("Error returned from %s api %#x\n", __func__, retval); + return retval; +} + +/** + * hdmi_audio_remove - removes the alsa card + * + *@haddata: pointer to HAD private data + * + * This function is called when the hdmi cable is un-plugged. This function + * free the sound card. + */ +int hdmi_audio_remove(void *pdevptr) +{ + struct snd_intelhad *intelhaddata = had_data; + int caps; + + pr_debug("Enter %s\n", __func__); + + if (!intelhaddata) + return 0; + + if (intelhaddata->drv_status != HAD_DRV_DISCONNECTED) { + caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps); + had_set_caps(HAD_SET_DISABLE_AUDIO, NULL); + } + snd_card_free(intelhaddata->card); + kfree(intelhaddata->private_data); + kfree(intelhaddata); + return 0; +} + +MODULE_AUTHOR("Sailaja Bandarupalli sailaja.bandarupalli@intel.com"); +MODULE_AUTHOR("Ramesh Babu K V ramesh.babu@intel.com"); +MODULE_AUTHOR("Vaibhav Agarwal vaibhav.agarwal@intel.com"); +MODULE_AUTHOR("Jerome Anand jerome.anand@intel.com"); +MODULE_DESCRIPTION("Intel HDMI Audio driver"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("{Intel,Intel_HAD}"); diff --git a/sound/x86/intel_hdmi_audio.h b/sound/x86/intel_hdmi_audio.h new file mode 100644 index 0000000..d2015ec --- /dev/null +++ b/sound/x86/intel_hdmi_audio.h @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2016 Intel Corporation + * Authors: Sailaja Bandarupalli sailaja.bandarupalli@intel.com + * Ramesh Babu K V ramesh.babu@intel.com + * Vaibhav Agarwal vaibhav.agarwal@intel.com + * Jerome Anand jerome.anand@intel.com + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files + * (the "Software"), to deal in the Software without restriction, + * including without limitation the rights to use, copy, modify, merge, + * publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial + * portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _INTEL_HDMI_AUDIO_H_ +#define _INTEL_HDMI_AUDIO_H_ + +#include <linux/types.h> +#include <sound/initval.h> +#include <linux/version.h> +#include <linux/pm_runtime.h> +#include <sound/asoundef.h> +#include <sound/control.h> +#include <sound/pcm.h> +#include "intel_hdmi_lpe_audio.h" + +#define PCM_INDEX 0 +#define MAX_PB_STREAMS 1 +#define MAX_CAP_STREAMS 0 +#define HDMI_AUDIO_DRIVER "hdmi-audio" + +#define INFO_FRAME_WORD1 0x000a0184 +#define FIFO_THRESHOLD 0xFE +#define DMA_FIFO_THRESHOLD 0x7 +#define BYTES_PER_WORD 0x4 + +/* Sampling rate as per IEC60958 Ver 3 */ +#define CH_STATUS_MAP_32KHZ 0x3 +#define CH_STATUS_MAP_44KHZ 0x0 +#define CH_STATUS_MAP_48KHZ 0x2 +#define CH_STATUS_MAP_88KHZ 0x8 +#define CH_STATUS_MAP_96KHZ 0xA +#define CH_STATUS_MAP_176KHZ 0xC +#define CH_STATUS_MAP_192KHZ 0xE + +#define MAX_SMPL_WIDTH_20 0x0 +#define MAX_SMPL_WIDTH_24 0x1 +#define SMPL_WIDTH_16BITS 0x1 +#define SMPL_WIDTH_24BITS 0x5 +#define CHANNEL_ALLOCATION 0x1F +#define MASK_BYTE0 0x000000FF +#define VALID_DIP_WORDS 3 +#define LAYOUT0 0 +#define LAYOUT1 1 +#define SWAP_LFE_CENTER 0x00fac4c8 +#define AUD_CONFIG_CH_MASK_V2 0x70 + +struct pcm_stream_info { + int str_id; + void *had_substream; + void (*period_elapsed)(void *had_substream); + u32 buffer_ptr; + u64 buffer_rendered; + u32 ring_buf_size; + int sfreq; +}; + +struct ring_buf_info { + u32 buf_addr; + u32 buf_size; + u8 is_valid; +}; + +struct had_stream_pvt { + enum had_stream_status stream_status; + int stream_ops; + ssize_t dbg_cum_bytes; +}; + +struct had_pvt_data { + enum had_status_stream stream_type; +}; + +struct had_callback_ops { + had_event_call_back intel_had_event_call_back; +}; + +/** + * struct snd_intelhad - intelhad driver structure + * + * @card: ptr to hold card details + * @card_index: sound card index + * @card_id: detected sound card id + * @reg_ops: register operations to program registers + * @query_ops: caps call backs for get/set operations + * @drv_status: driver status + * @buf_info: ring buffer info + * @stream_info: stream information + * @eeld: holds EELD info + * @curr_buf: pointer to hold current active ring buf + * @valid_buf_cnt: ring buffer count for stream + * @had_spinlock: driver lock + * @aes_bits: IEC958 status bits + * @buff_done: id of current buffer done intr + * @dev: platoform device handle + * @kctl: holds kctl ptrs used for channel map + * @chmap: holds channel map info + * @audio_reg_base: hdmi audio register base offset + * @hw_silence: flag indicates SoC support for HW silence/Keep alive + * @ops: holds ops functions based on platform + */ +struct snd_intelhad { + struct snd_card *card; + int card_index; + char *card_id; + struct hdmi_audio_registers_ops reg_ops; + struct hdmi_audio_query_set_ops query_ops; + enum had_drv_status drv_status; + struct ring_buf_info buf_info[HAD_NUM_OF_RING_BUFS]; + struct pcm_stream_info stream_info; + union otm_hdmi_eld_t eeld; + enum intel_had_aud_buf_type curr_buf; + int valid_buf_cnt; + unsigned int aes_bits; + int flag_underrun; + struct had_pvt_data *private_data; + spinlock_t had_spinlock; + enum intel_had_aud_buf_type buff_done; + struct device *dev; + struct snd_kcontrol *kctl; + struct snd_pcm_chmap *chmap; + unsigned int *audio_reg_base; + unsigned int audio_cfg_offset; + bool hw_silence; + struct had_ops *ops; +}; + +struct had_ops { + void (*enable_audio)(struct snd_pcm_substream *substream, + u8 enable); + void (*reset_audio)(u8 reset); + int (*prog_n)(u32 aud_samp_freq, u32 *n_param, + struct snd_intelhad *intelhaddata); + void (*prog_cts)(u32 aud_samp_freq, u32 tmds, u32 n_param, + struct snd_intelhad *intelhaddata); + int (*audio_ctrl)(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata); + void (*prog_dip)(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata); + void (*handle_underrun)(struct snd_intelhad *intelhaddata); +}; + + +int had_event_handler(enum had_event_type event_type, void *data); + +int hdmi_audio_query(void *drv_data, struct hdmi_audio_event event); +int hdmi_audio_suspend(void *drv_data, struct hdmi_audio_event event); +int hdmi_audio_resume(void *drv_data); +int hdmi_audio_mode_change(struct snd_pcm_substream *substream); +extern struct snd_pcm_ops snd_intelhad_playback_ops; + +int snd_intelhad_init_audio_ctrl(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata, + int flag_silence); +int snd_intelhad_prog_buffer(struct snd_intelhad *intelhaddata, + int start, int end); +int snd_intelhad_invd_buffer(int start, int end); +int snd_intelhad_read_len(struct snd_intelhad *intelhaddata); +void had_build_channel_allocation_map(struct snd_intelhad *intelhaddata); + +/* Register access functions */ +int had_get_hwstate(struct snd_intelhad *intelhaddata); +int had_get_caps(enum had_caps_list query_element, void *capabilties); +int had_set_caps(enum had_caps_list set_element, void *capabilties); +int had_read_register(u32 reg_addr, u32 *data); +int had_write_register(u32 reg_addr, u32 data); +int had_read_modify(u32 reg_addr, u32 data, u32 mask); + +int hdmi_audio_probe(void *devptr); +int hdmi_audio_remove(void *pdev); + +#endif /* _INTEL_HDMI_AUDIO_ */ diff --git a/sound/x86/intel_hdmi_audio_if.c b/sound/x86/intel_hdmi_audio_if.c new file mode 100644 index 0000000..c650ba4 --- /dev/null +++ b/sound/x86/intel_hdmi_audio_if.c @@ -0,0 +1,551 @@ +/* + * intel_hdmi_audio_if.c - Intel HDMI audio driver for MID + * + * Copyright (C) 2016 Intel Corp + * Authors: Sailaja Bandarupalli sailaja.bandarupalli@intel.com + * Ramesh Babu K V ramesh.babu@intel.com + * Vaibhav Agarwal vaibhav.agarwal@intel.com + * Jerome Anand jerome.anand@intel.com + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * ALSA driver for Intel MID HDMI audio controller. This file contains + * interface functions exposed to HDMI Display driver and code to register + * with ALSA framework.. + */ + +#define pr_fmt(fmt) "had: " fmt + +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/slab.h> +#include <sound/pcm.h> +#include <sound/core.h> +#include "intel_hdmi_audio.h" +#include "intel_hdmi_lpe_audio.h" + +/** + * hdmi_audio_query - hdmi audio query function + * + *@haddata: pointer to HAD private data + *@event: audio event for which this method is invoked + * + * This function is called by client driver to query the + * hdmi audio. + */ +int hdmi_audio_query(void *haddata, struct hdmi_audio_event event) +{ + struct snd_pcm_substream *substream = NULL; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata; + + if (intelhaddata->stream_info.had_substream) + substream = intelhaddata->stream_info.had_substream; + had_stream = intelhaddata->private_data; + switch (event.type) { + case HAD_EVENT_QUERY_IS_AUDIO_BUSY: + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + + if ((had_stream->stream_type == HAD_RUNNING_STREAM) || + substream) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, + flag_irqs); + pr_debug("Audio stream active\n"); + return -EBUSY; + } + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + break; + + case HAD_EVENT_QUERY_IS_AUDIO_SUSPENDED: + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_SUSPENDED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, + flag_irqs); + pr_debug("Audio is suspended\n"); + return 1; + } + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + break; + + default: + pr_debug("error un-handled event !!\n"); + return -EINVAL; + break; + + } + + return 0; +} + +/** + * hdmi_audio_suspend - power management suspend function + * + *@haddata: pointer to HAD private data + *@event: pm event for which this method is invoked + * + * This function is called by client driver to suspend the + * hdmi audio. + */ +int hdmi_audio_suspend(void *haddata, struct hdmi_audio_event event) +{ + int caps, retval = 0; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + struct snd_pcm_substream *substream; + struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata; + + pr_debug("Enter:%s\n", __func__); + + had_stream = intelhaddata->private_data; + substream = intelhaddata->stream_info.had_substream; + + if (intelhaddata->dev->power.runtime_status != RPM_SUSPENDED) { + pr_err("audio stream is active\n"); + return -EAGAIN; + } + + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_debug("had not connected\n"); + return retval; + } + + if (intelhaddata->drv_status == HAD_DRV_SUSPENDED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_debug("had already suspended\n"); + return retval; + } + + intelhaddata->drv_status = HAD_DRV_SUSPENDED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_SUSPENDED\n", + __func__, __LINE__); + + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + /* + * ToDo: Need to disable UNDERRUN interrupts as well + * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + */ + caps = HDMI_AUDIO_BUFFER_DONE; + had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps); + had_set_caps(HAD_SET_DISABLE_AUDIO, NULL); + pr_debug("Exit:%s", __func__); + return retval; +} + +/** + * hdmi_audio_resume - power management resume function + * + *@haddata: pointer to HAD private data + * + * This function is called by client driver to resume the + * hdmi audio. + */ +int hdmi_audio_resume(void *haddata) +{ + int caps, retval = 0; + struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata; + unsigned long flag_irqs; + + pr_debug("Enter:%s\n", __func__); + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_debug("had not connected\n"); + return 0; + } + + if (intelhaddata->drv_status != HAD_DRV_SUSPENDED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_err("had is not in suspended state\n"); + return 0; + } + + if (had_get_hwstate(intelhaddata)) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_err("Failed to resume. Device not accessible\n"); + return -ENODEV; + } + + intelhaddata->drv_status = HAD_DRV_CONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n", + __func__, __LINE__); + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + /* + * ToDo: Need to enable UNDERRUN interrupts as well + * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + */ + caps = HDMI_AUDIO_BUFFER_DONE; + retval = had_set_caps(HAD_SET_ENABLE_AUDIO_INT, &caps); + retval = had_set_caps(HAD_SET_ENABLE_AUDIO, NULL); + pr_debug("Exit:%s", __func__); + return retval; +} + +static inline int had_chk_intrmiss(struct snd_intelhad *intelhaddata, + enum intel_had_aud_buf_type buf_id) +{ + int i, intr_count = 0; + enum intel_had_aud_buf_type buff_done; + u32 buf_size, buf_addr; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + + had_stream = intelhaddata->private_data; + + buff_done = buf_id; + + intr_count = snd_intelhad_read_len(intelhaddata); + if (intr_count > 1) { + /* In case of active playback */ + pr_err("Driver detected %d missed buffer done interrupt(s)!!!!\n", + (intr_count - 1)); + if (intr_count > 3) + return intr_count; + + buf_id += (intr_count - 1); + /* Reprogram registers*/ + for (i = buff_done; i < buf_id; i++) { + int j = i % 4; + + buf_size = intelhaddata->buf_info[j].buf_size; + buf_addr = intelhaddata->buf_info[j].buf_addr; + had_write_register(AUD_BUF_A_LENGTH + + (j * HAD_REG_WIDTH), buf_size); + had_write_register( + AUD_BUF_A_ADDR+(j * HAD_REG_WIDTH), + (buf_addr | BIT(0) | BIT(1))); + } + buf_id = buf_id % 4; + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + intelhaddata->buff_done = buf_id; + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + } + + return intr_count; +} + +int had_process_buffer_done(struct snd_intelhad *intelhaddata) +{ + int retval = 0; + u32 len = 1; + enum intel_had_aud_buf_type buf_id; + enum intel_had_aud_buf_type buff_done; + struct pcm_stream_info *stream; + u32 buf_size; + struct had_pvt_data *had_stream; + int intr_count; + enum had_status_stream stream_type; + unsigned long flag_irqs; + + had_stream = intelhaddata->private_data; + stream = &intelhaddata->stream_info; + intr_count = 1; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_err("%s:Device already disconnected\n", __func__); + return retval; + } + buf_id = intelhaddata->curr_buf; + intelhaddata->buff_done = buf_id; + buff_done = intelhaddata->buff_done; + buf_size = intelhaddata->buf_info[buf_id].buf_size; + stream_type = had_stream->stream_type; + + pr_debug("Enter:%s buf_id=%d\n", __func__, buf_id); + + /* Every debug statement has an implication + * of ~5msec. Thus, avoid having >3 debug statements + * for each buffer_done handling. + */ + + /* Check for any intr_miss in case of active playback */ + if (had_stream->stream_type == HAD_RUNNING_STREAM) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + intr_count = had_chk_intrmiss(intelhaddata, buf_id); + if (!intr_count || (intr_count > 3)) { + pr_err("HAD SW state in non-recoverable!!! mode\n"); + pr_err("Already played stale data\n"); + return retval; + } + buf_id += (intr_count - 1); + buf_id = buf_id % 4; + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + } + + intelhaddata->buf_info[buf_id].is_valid = true; + if (intelhaddata->valid_buf_cnt-1 == buf_id) { + if (had_stream->stream_type >= HAD_RUNNING_STREAM) + intelhaddata->curr_buf = HAD_BUF_TYPE_A; + } else + intelhaddata->curr_buf = buf_id + 1; + + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + + if (had_get_hwstate(intelhaddata)) { + pr_err("HDMI cable plugged-out\n"); + return retval; + } + + /*Reprogram the registers with addr and length*/ + had_write_register(AUD_BUF_A_LENGTH + + (buf_id * HAD_REG_WIDTH), buf_size); + had_write_register(AUD_BUF_A_ADDR+(buf_id * HAD_REG_WIDTH), + intelhaddata->buf_info[buf_id].buf_addr| + BIT(0) | BIT(1)); + + had_read_register(AUD_BUF_A_LENGTH + (buf_id * HAD_REG_WIDTH), + &len); + pr_debug("%s:Enabled buf[%d]\n", __func__, buf_id); + + /* In case of actual data, + * report buffer_done to above ALSA layer + */ + buf_size = intelhaddata->buf_info[buf_id].buf_size; + if (stream_type >= HAD_RUNNING_STREAM) { + intelhaddata->stream_info.buffer_rendered += + (intr_count * buf_size); + stream->period_elapsed(stream->had_substream); + } + + return retval; +} + +int had_process_buffer_underrun(struct snd_intelhad *intelhaddata) +{ + int retval = 0; + enum intel_had_aud_buf_type buf_id; + struct pcm_stream_info *stream; + struct had_pvt_data *had_stream; + enum had_status_stream stream_type; + unsigned long flag_irqs; + int drv_status; + + had_stream = intelhaddata->private_data; + stream = &intelhaddata->stream_info; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + buf_id = intelhaddata->curr_buf; + stream_type = had_stream->stream_type; + intelhaddata->buff_done = buf_id; + drv_status = intelhaddata->drv_status; + if (stream_type == HAD_RUNNING_STREAM) + intelhaddata->curr_buf = HAD_BUF_TYPE_A; + + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + + pr_debug("Enter:%s buf_id=%d, stream_type=%d\n", + __func__, buf_id, stream_type); + + intelhaddata->ops->handle_underrun(intelhaddata); + + if (drv_status == HAD_DRV_DISCONNECTED) { + pr_err("%s:Device already disconnected\n", __func__); + return retval; + } + + if (stream_type == HAD_RUNNING_STREAM) { + /* Report UNDERRUN error to above layers */ + intelhaddata->flag_underrun = 1; + stream->period_elapsed(stream->had_substream); + } + + return retval; +} + +int had_process_hot_plug(struct snd_intelhad *intelhaddata) +{ + int retval = 0; + enum intel_had_aud_buf_type buf_id; + struct snd_pcm_substream *substream; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + + pr_debug("Enter:%s\n", __func__); + + substream = intelhaddata->stream_info.had_substream; + had_stream = intelhaddata->private_data; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_CONNECTED) { + pr_debug("Device already connected\n"); + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + return retval; + } + buf_id = intelhaddata->curr_buf; + intelhaddata->buff_done = buf_id; + intelhaddata->drv_status = HAD_DRV_CONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_CONNECTED\n", + __func__, __LINE__); + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + + pr_debug("Processing HOT_PLUG, buf_id = %d\n", buf_id); + + /* Query display driver for audio register base */ + if (intelhaddata->reg_ops.hdmi_audio_get_register_base( + &intelhaddata->audio_reg_base, + &intelhaddata->audio_cfg_offset)) { + pr_err("Unable to get audio reg base from Display driver\n"); + goto err; + } + + if (intelhaddata->audio_reg_base == NULL) { + pr_err("audio reg base value is NULL\n"); + goto err; + } + + pr_debug("%s audio_reg_base = 0x%p\n", __func__, + intelhaddata->audio_reg_base); + + /* Safety check */ + if (substream) { + pr_debug("There should not be active PB from ALSA\n"); + pr_debug("Signifies, cable is plugged-in even before\n"); + pr_debug("processing snd_pcm_disconnect\n"); + /* Set runtime->state to hw_params done */ + snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP); + } + + had_build_channel_allocation_map(intelhaddata); + + return retval; + +err: + pm_runtime_disable(intelhaddata->dev); + intelhaddata->dev = NULL; + return retval; +} + +int had_process_hot_unplug(struct snd_intelhad *intelhaddata) +{ + int caps, retval = 0; + enum intel_had_aud_buf_type buf_id; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + + pr_debug("Enter:%s\n", __func__); + + had_stream = intelhaddata->private_data; + buf_id = intelhaddata->curr_buf; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + pr_debug("Device already disconnected\n"); + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + return retval; + + } else { + /* Disable Audio */ + caps = HDMI_AUDIO_BUFFER_DONE; + retval = had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps); + retval = had_set_caps(HAD_SET_DISABLE_AUDIO, NULL); + intelhaddata->ops->enable_audio( + intelhaddata->stream_info.had_substream, 0); + } + + intelhaddata->drv_status = HAD_DRV_DISCONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n", + __func__, __LINE__); + + /* Report to above ALSA layer */ + if (intelhaddata->stream_info.had_substream != NULL) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_debug("%s: unlock -> sending pcm_stop -> lock\n", __func__); + snd_pcm_stop(intelhaddata->stream_info.had_substream, + SNDRV_PCM_STATE_DISCONNECTED); + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + } + + had_stream->stream_type = HAD_INIT; + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + kfree(intelhaddata->chmap->chmap); + intelhaddata->chmap->chmap = NULL; + intelhaddata->audio_reg_base = NULL; + pr_debug("%s: unlocked -> returned\n", __func__); + + return retval; +} + +/** + * had_event_handler - Call back function to handle events + * + * @event_type: Event type to handle + * @data: data related to the event_type + * + * This function is invoked to handle HDMI events from client driver. + */ +int had_event_handler(enum had_event_type event_type, void *data) +{ + int retval = 0; + struct snd_intelhad *intelhaddata = data; + enum intel_had_aud_buf_type buf_id; + struct snd_pcm_substream *substream; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + + buf_id = intelhaddata->curr_buf; + had_stream = intelhaddata->private_data; + + /* Switching to a function can drop atomicity even in INTR context. + * Thus, a big lock is acquired to maintain atomicity. + * This can be optimized later. + * Currently, only buffer_done/_underrun executes in INTR context. + * Also, locking is implemented separately to avoid real contention + * of data(struct intelhaddata) between IRQ/SOFT_IRQ/PROCESS context. + */ + substream = intelhaddata->stream_info.had_substream; + switch (event_type) { + case HAD_EVENT_AUDIO_BUFFER_DONE: + retval = had_process_buffer_done(intelhaddata); + break; + + case HAD_EVENT_AUDIO_BUFFER_UNDERRUN: + retval = had_process_buffer_underrun(intelhaddata); + break; + + case HAD_EVENT_HOT_PLUG: + retval = had_process_hot_plug(intelhaddata); + break; + + case HAD_EVENT_HOT_UNPLUG: + retval = had_process_hot_unplug(intelhaddata); + break; + + case HAD_EVENT_MODE_CHANGING: + pr_debug(" called _event_handler with _MODE_CHANGE event\n"); + /* Process only if stream is active & cable Plugged-in */ + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status >= HAD_DRV_DISCONNECTED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, + flag_irqs); + break; + } + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + if ((had_stream->stream_type == HAD_RUNNING_STREAM) + && substream) + retval = hdmi_audio_mode_change(substream); + break; + + default: + pr_debug("error un-handled event !!\n"); + retval = -EINVAL; + break; + + } + return retval; +} diff --git a/sound/x86/intel_hdmi_lpe_audio.c b/sound/x86/intel_hdmi_lpe_audio.c index a9fd2d3..ce24ef1 100644 --- a/sound/x86/intel_hdmi_lpe_audio.c +++ b/sound/x86/intel_hdmi_lpe_audio.c @@ -34,6 +34,7 @@ #include <sound/initval.h> #include <drm/intel_lpe_audio.h> #include "intel_hdmi_lpe_audio.h" +#include "intel_hdmi_audio.h"
/* globals*/ static struct platform_device *hlpe_pdev; @@ -450,9 +451,9 @@ static void notify_audio_lpe(void *audio_ptr) /** * hdmi_lpe_audio_probe - start bridge with i915 * - * This function is called when the i915 driver creates the hdmi-lpe-audio - * platform device. Card creation is deferred until a hot plug event is - * received + * This function is called when the i915 driver creates the + * hdmi-lpe-audio platform device. Card creation is deferred until a + * hot plug event is received */ static int hdmi_lpe_audio_probe(struct platform_device *pdev) { @@ -495,8 +496,8 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) (unsigned int)res_mmio->end);
mmio_start = ioremap_nocache(res_mmio->start, - (size_t)((res_mmio->end - res_mmio->start) - + 1)); + (size_t)((res_mmio->end - + res_mmio->start) + 1)); if (!mmio_start) { dev_err(&hlpe_pdev->dev, "Could not get ioremap\n"); return -EACCES; @@ -548,11 +549,11 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ctx);
+ ret = hdmi_audio_probe((void *)pdev); dev_dbg(&hlpe_pdev->dev, "hdmi lpe audio: setting pin eld notify callback\n");
spin_lock_irqsave(&pdata->lpe_audio_slock, flag_irq); pdata->notify_audio_lpe = notify_audio_lpe; - if (pdata->notify_pending) {
dev_dbg(&hlpe_pdev->dev, "%s: handle pending notification\n", __func__); @@ -576,6 +577,8 @@ static int hdmi_lpe_audio_remove(struct platform_device *pdev)
dev_dbg(&hlpe_pdev->dev, "Enter %s\n", __func__);
+ hdmi_audio_remove(pdev); + /* get context, release resources */ ctx = platform_get_drvdata(pdev); iounmap(ctx->mmio_start);
On Fri, 20 Jan 2017 23:22:31 +0100, Jerome Anand wrote:
- had_ops_v1 = had_ops_v1; /* unused */
Until now I didn't realize that the whole v1 stuff is never used in the current patchset. Will it be ever used in future? If not, can't we clean it up? It's a bunch of codes, including the messy union definitions. If there is no v3 or whatever, we can even get rid of the whole indirect calls.
And if v1 (and the indirect ops calls) should be kept, actually what is the difference between v1 and v2, why both implementations do exist? Please elaborate in comments.
thanks,
Takashi
On 1/20/17 5:15 AM, Takashi Iwai wrote:
On Fri, 20 Jan 2017 23:22:31 +0100, Jerome Anand wrote:
- had_ops_v1 = had_ops_v1; /* unused */
Until now I didn't realize that the whole v1 stuff is never used in the current patchset. Will it be ever used in future? If not, can't we clean it up? It's a bunch of codes, including the messy union definitions. If there is no v3 or whatever, we can even get rid of the whole indirect calls.
And if v1 (and the indirect ops calls) should be kept, actually what is the difference between v1 and v2, why both implementations do exist? Please elaborate in comments.
v1 refers to Medfield/Clovertrail, v2 to Baytrail/CHT. The differences are minor and centered on different register definitions or additional features/bug corrections. We left the v1 code in so far but we could probably remove it since it's not tested anyway. The question is if we remove this v1 code and indirect calls now or later, I was planning to add DP audio support and making more changes would make the integration more difficult.
On Fri, 20 Jan 2017 17:45:53 +0100, Pierre-Louis Bossart wrote:
On 1/20/17 5:15 AM, Takashi Iwai wrote:
On Fri, 20 Jan 2017 23:22:31 +0100, Jerome Anand wrote:
- had_ops_v1 = had_ops_v1; /* unused */
Until now I didn't realize that the whole v1 stuff is never used in the current patchset. Will it be ever used in future? If not, can't we clean it up? It's a bunch of codes, including the messy union definitions. If there is no v3 or whatever, we can even get rid of the whole indirect calls.
And if v1 (and the indirect ops calls) should be kept, actually what is the difference between v1 and v2, why both implementations do exist? Please elaborate in comments.
v1 refers to Medfield/Clovertrail, v2 to Baytrail/CHT. The differences are minor and centered on different register definitions or additional features/bug corrections. We left the v1 code in so far but we could probably remove it since it's not tested anyway. The question is if we remove this v1 code and indirect calls now or later, I was planning to add DP audio support and making more changes would make the integration more difficult.
It's up to you. I prefer the DP implementation sooner so that I can test the driver by myself, which makes me easier working on a later cleanup of the driver code after the merge.
My previous question was about the general question, to determine how far we can reduce things.
thanks,
Takashi
When the display resolution changes, the drm disables the display pipes due to which audio rendering stops. At this time, we need to ensure the existing audio pointers and buffers are cleared out so that the playback can restarted once the display pipe is enabled with a different N/CTS values
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Jerome Anand jerome.anand@intel.com --- sound/x86/intel_hdmi_audio.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index b69521a..f301554 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -43,6 +43,7 @@ static DEFINE_MUTEX(had_mutex); static int hdmi_card_index = SNDRV_DEFAULT_IDX1; static char *hdmi_card_id = SNDRV_DEFAULT_STR1; static struct snd_intelhad *had_data; +static int underrun_count;
module_param_named(index, hdmi_card_index, int, 0444); MODULE_PARM_DESC(index, @@ -1052,6 +1053,7 @@ static int snd_intelhad_open(struct snd_pcm_substream *substream) intelhaddata = snd_pcm_substream_chip(substream); had_stream = intelhaddata->private_data; runtime = substream->runtime; + underrun_count = 0;
pm_runtime_get(intelhaddata->dev);
@@ -1445,10 +1447,23 @@ static snd_pcm_uframes_t snd_intelhad_pcm_pointer(
buf_id = intelhaddata->curr_buf % 4; had_read_register(AUD_BUF_A_LENGTH + (buf_id * HAD_REG_WIDTH), &t); - if (t == 0) { - pr_debug("discovered buffer done for buf %d\n", buf_id); - /* had_process_buffer_done(intelhaddata); */ + + if ((t == 0) || (t == ((u32)-1L))) { + underrun_count++; + pr_debug("discovered buffer done for buf %d, count = %d\n", + buf_id, underrun_count); + + if (underrun_count > (HAD_MIN_PERIODS/2)) { + pr_debug("assume audio_codec_reset, underrun = %d - do xrun\n", + underrun_count); + underrun_count = 0; + return SNDRV_PCM_POS_XRUN; + } + } else { + /* Reset Counter */ + underrun_count = 0; } + t = intelhaddata->buf_info[buf_id].buf_size - t;
if (intelhaddata->stream_info.buffer_rendered)
On Fri, 20 Jan 2017 23:22:27 +0100, Jerome Anand wrote:
Legacy (CherryTrail/ Baytrail) HDMI audio drivers added Legacy hdmi audio-Gfx interaction/ interfacing is updated to use irq chip framework
This patch series has only been tested on hardware with a single HDMI connector/pipe and additional work may be needed for newer machines with 2 connectors
Jerome Anand (5): drm/i915: setup bridge for HDMI LPE audio driver drm/i915: Add support for audio driver notifications ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T ALSA: x86: hdmi: Add audio support for BYT and CHT ALSA: x86: hdmi: continue playback even when display resolution changes
I can merge the audio part and do cleanups later. This would be better than spinning forever in ML. It's a stand-alone driver, and people can test it out at least more easily. But still I need ACKs for the changes in drm/i915.
Daniel, Jani, could you guys take a look at the first two patches?
I know it's no ideal solution, and I'd love to avoid the double standards for audio-video communication, too. OTOH, it's a small portion and the API usage is pretty limited, hence we may unify / cleanup the interface later, too.
thanks,
Takashi
Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 8 +- drivers/gpu/drm/i915/i915_drv.h | 17 + drivers/gpu/drm/i915/i915_irq.c | 16 + drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 8 + drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 388 +++++++ include/drm/intel_lpe_audio.h | 46 + sound/Kconfig | 2 + sound/Makefile | 2 +- sound/x86/Kconfig | 15 + sound/x86/Makefile | 6 + sound/x86/intel_hdmi_audio.c | 1870 ++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_audio.h | 197 ++++ sound/x86/intel_hdmi_audio_if.c | 551 ++++++++++ sound/x86/intel_hdmi_lpe_audio.c | 617 +++++++++++ sound/x86/intel_hdmi_lpe_audio.h | 683 ++++++++++++ 19 files changed, 4439 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.h create mode 100644 sound/x86/Kconfig create mode 100644 sound/x86/Makefile create mode 100644 sound/x86/intel_hdmi_audio.c create mode 100644 sound/x86/intel_hdmi_audio.h create mode 100644 sound/x86/intel_hdmi_audio_if.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.h
-- 2.9.3
base-commit: eb5c556a1e5eff388e48e4b7cf61e95783019e83
participants (5)
-
Anand, Jerome
-
Jani Nikula
-
Jerome Anand
-
Pierre-Louis Bossart
-
Takashi Iwai