[alsa-devel] [PATCH v2 0/4] ASoC: codecs: Add WSA881x Smart Speaker amplifier support
This patchset adds support to WSA8810/WSA8815 Class-D Smart Speaker Amplifier which is SoundWire interfaced. This also adds support to some missing bits in SoundWire bus layer like Device Tree support and module_sdw_driver macro.
This patchset along with DB845c machine driver and WCD934x codec driver has been tested on SDM845 SoC based DragonBoard DB845c with two WSA8810 speakers.
Most of the code in this driver is rework of Qualcomm downstream drivers used in Andriod. Credits to Banajit Goswami and Patrick Lai's Team.
TODO: Add thermal sensor support in WSA881x.
This patchset also depends on the soundwire Kconfig patch https://lkml.org/lkml/2019/7/18/834 from Pierre
Thanks, srini
Changes since v1 RFC: - bindings document renamed to slave.txt - fix error code from dt slave parsing
Srinivas Kandagatla (4): dt-bindings: soundwire: add slave bindings soundwire: core: add device tree support for slave devices dt-bindings: ASoC: Add WSA881x bindings ASoC: codecs: add wsa881x amplifier support
.../bindings/sound/qcom,wsa881x.txt | 27 + .../devicetree/bindings/soundwire/slave.txt | 46 + drivers/soundwire/bus.c | 2 + drivers/soundwire/bus.h | 1 + drivers/soundwire/slave.c | 47 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wsa881x.c | 1160 +++++++++++++++++ 8 files changed, 1295 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.txt create mode 100644 Documentation/devicetree/bindings/soundwire/slave.txt create mode 100644 sound/soc/codecs/wsa881x.c
This patch adds bindings for Soundwire Slave devices which includes how SoundWire enumeration address is represented in SoundWire slave device tree nodes.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- .../devicetree/bindings/soundwire/slave.txt | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/soundwire/slave.txt
diff --git a/Documentation/devicetree/bindings/soundwire/slave.txt b/Documentation/devicetree/bindings/soundwire/slave.txt new file mode 100644 index 000000000000..b8e8d34bbc92 --- /dev/null +++ b/Documentation/devicetree/bindings/soundwire/slave.txt @@ -0,0 +1,46 @@ +SoundWire slave device bindings. + +SoundWire is a 2-pin multi-drop interface with data and clock line. +It facilitates development of low cost, efficient, high performance systems. + +SoundWire slave devices: +Every SoundWire controller node can contain zero or more child nodes +representing slave devices on the bus. Every SoundWire slave device is +uniquely determined by the enumeration address containing 5 fields: +SoundWire Version, Instance ID, Manufacturer ID, Part ID and Class ID +for a device. Addition to below required properties, child nodes can +have device specific bindings. + +Required property for SoundWire child node if it is present: +- compatible: "sdwVER,MFD,PID,CID". The textual representation of + SoundWire Enumeration address comprising SoundWire + Version, Manufacturer ID, Part ID and Class ID, + shall be in lower-case hexadecimal with leading + zeroes suppressed. + Version number '0x10' represents SoundWire 1.0 + Version number '0x11' represents SoundWire 1.1 + ex: "sdw10,0217,2010,0" + +- sdw-instance-id: Should be ('Instance ID') from SoundWire + Enumeration Address. Instance ID is for the cases + where multiple Devices of the same type or Class + are attached to the bus. + +SoundWire example for Qualcomm's SoundWire controller: + +soundwire@c2d0000 { + compatible = "qcom,soundwire-v1.5.0" + reg = <0x0c2d0000 0x2000>; + + spkr_left:wsa8810-left{ + compatible = "sdw10,0217,2010,0"; + sdw-instance-id = <1>; + ... + }; + + spkr_right:wsa8810-right{ + compatible = "sdw10,0217,2010,0"; + sdw-instance-id = <2>; + ... + }; +};
+++ b/Documentation/devicetree/bindings/soundwire/slave.txt @@ -0,0 +1,46 @@ +SoundWire slave device bindings.
+SoundWire is a 2-pin multi-drop interface with data and clock line. +It facilitates development of low cost, efficient, high performance systems.
+SoundWire slave devices: +Every SoundWire controller node can contain zero or more child nodes +representing slave devices on the bus. Every SoundWire slave device is +uniquely determined by the enumeration address containing 5 fields: +SoundWire Version, Instance ID, Manufacturer ID, Part ID and Class ID +for a device. Addition to below required properties, child nodes can +have device specific bindings.
In case the controller supports multiple links, what's the encoding then? in the MIPI DisCo spec there is a linkId field in the _ADR encoding that helps identify which link the Slave device is connected to
+Required property for SoundWire child node if it is present: +- compatible: "sdwVER,MFD,PID,CID". The textual representation of
SoundWire Enumeration address comprising SoundWireVersion, Manufacturer ID, Part ID and Class ID,shall be in lower-case hexadecimal with leadingzeroes suppressed.Version number '0x10' represents SoundWire 1.0Version number '0x11' represents SoundWire 1.1ex: "sdw10,0217,2010,0"+- sdw-instance-id: Should be ('Instance ID') from SoundWire
Enumeration Address. Instance ID is for the caseswhere multiple Devices of the same type or Classare attached to the bus.
so it is actually required if you have a single Slave device? Or is it only required when you have more than 1 device of the same type?
FWIW in the MIPI DisCo spec we kept the instanceID as part of the _ADR, so it's implicitly mandatory (and ignored by the bus if there is only one device of the same time)
+SoundWire example for Qualcomm's SoundWire controller:
+soundwire@c2d0000 {
- compatible = "qcom,soundwire-v1.5.0"
- reg = <0x0c2d0000 0x2000>;
- spkr_left:wsa8810-left{
compatible = "sdw10,0217,2010,0";sdw-instance-id = <1>;...- };
- spkr_right:wsa8810-right{
compatible = "sdw10,0217,2010,0";sdw-instance-id = <2>;
Isn't the MIPI encoding reported in the Dev_ID0..5 registers 0-based?
...- };
+};
And now that I think of it, wouldn't it be simpler for everyone if we aligned on that MIPI DisCo public spec? e.g. you'd have one property with a 64-bit number that follows the MIPI spec. No special encoding necessary for device tree cases, your DT blob would use this:
soundwire@c2d0000 { compatible = "qcom,soundwire-v1.5.0" reg = <0x0c2d0000 0x2000>;
spkr_left:wsa8810-left{ compatible = "sdw0000100217201000" }
spkr_right:wsa8810-right{ compatible = "sdw0000100217201100" } }
We could use parentheses if it makes people happier, but the information from the MIPI DisCo spec can be used as is, and provide a means for spec changes via reserved bits.
On 08/08/2019 16:58, Pierre-Louis Bossart wrote:
+++ b/Documentation/devicetree/bindings/soundwire/slave.txt @@ -0,0 +1,46 @@ +SoundWire slave device bindings.
+SoundWire is a 2-pin multi-drop interface with data and clock line. +It facilitates development of low cost, efficient, high performance systems.
+SoundWire slave devices: +Every SoundWire controller node can contain zero or more child nodes +representing slave devices on the bus. Every SoundWire slave device is +uniquely determined by the enumeration address containing 5 fields: +SoundWire Version, Instance ID, Manufacturer ID, Part ID and Class ID +for a device. Addition to below required properties, child nodes can +have device specific bindings.
In case the controller supports multiple links, what's the encoding then? in the MIPI DisCo spec there is a linkId field in the _ADR encoding that helps identify which link the Slave device is connected to
+Required property for SoundWire child node if it is present: +- compatible: "sdwVER,MFD,PID,CID". The textual representation of + SoundWire Enumeration address comprising SoundWire + Version, Manufacturer ID, Part ID and Class ID, + shall be in lower-case hexadecimal with leading + zeroes suppressed. + Version number '0x10' represents SoundWire 1.0 + Version number '0x11' represents SoundWire 1.1 + ex: "sdw10,0217,2010,0"
+- sdw-instance-id: Should be ('Instance ID') from SoundWire + Enumeration Address. Instance ID is for the cases + where multiple Devices of the same type or Class + are attached to the bus.
so it is actually required if you have a single Slave device? Or is it only required when you have more than 1 device of the same type?
This is mandatory for any slave device!
FWIW in the MIPI DisCo spec we kept the instanceID as part of the _ADR, so it's implicitly mandatory (and ignored by the bus if there is only one device of the same time)
+SoundWire example for Qualcomm's SoundWire controller:
+soundwire@c2d0000 { + compatible = "qcom,soundwire-v1.5.0" + reg = <0x0c2d0000 0x2000>;
+ spkr_left:wsa8810-left{ + compatible = "sdw10,0217,2010,0"; + sdw-instance-id = <1>; + ... + };
+ spkr_right:wsa8810-right{ + compatible = "sdw10,0217,2010,0"; + sdw-instance-id = <2>;
Isn't the MIPI encoding reported in the Dev_ID0..5 registers 0-based?
+ ... + }; +};
And now that I think of it, wouldn't it be simpler for everyone if we aligned on that MIPI DisCo public spec? e.g. you'd have one property with a 64-bit number that follows the MIPI spec. No special encoding necessary for device tree cases, your DT blob would use this:
Thanks for the suggestion, adding 64 device bits as compatible string should take care of linkID too. I will give that a go!
soundwire@c2d0000 { compatible = "qcom,soundwire-v1.5.0" reg = <0x0c2d0000 0x2000>;
spkr_left:wsa8810-left{ compatible = "sdw00 00 10 02 17 20 10 00" }
spkr_right:wsa8810-right{ compatible = "sdw0000100217201100" } }
We could use parentheses if it makes people happier, but the information from the MIPI DisCo spec can be used as is, and provide a means for spec changes via reserved bits.
On Thu, Aug 08, 2019 at 05:48:56PM +0100, Srinivas Kandagatla wrote:
On 08/08/2019 16:58, Pierre-Louis Bossart wrote:
+- sdw-instance-id: Should be ('Instance ID') from SoundWire + Enumeration Address. Instance ID is for the cases + where multiple Devices of the same type or Class + are attached to the bus.
so it is actually required if you have a single Slave device? Or is it only required when you have more than 1 device of the same type?
This is mandatory for any slave device!
If it's mandatory the wording is a bit unclear. How about something like:
Should be ('Instance ID') from the SoundWire Enumeration Address. This must always be provided, if multiple devices with the same type or class or attached to the bus each instance must have a distinct value.
On 08-08-19, 20:52, Mark Brown wrote:
On Thu, Aug 08, 2019 at 05:48:56PM +0100, Srinivas Kandagatla wrote:
On 08/08/2019 16:58, Pierre-Louis Bossart wrote:
+- sdw-instance-id: Should be ('Instance ID') from SoundWire + Enumeration Address. Instance ID is for the cases + where multiple Devices of the same type or Class + are attached to the bus.
so it is actually required if you have a single Slave device? Or is it only required when you have more than 1 device of the same type?
This is mandatory for any slave device!
If it's mandatory the wording is a bit unclear. How about something like:
Should be ('Instance ID') from the SoundWire Enumeration Address. This must always be provided, if multiple devices with the same type or class or attached to the bus each instance must have a distinct value.
That helps to make it clear.
Also the section of properties starts with Mandatory property, it should be made Mandatory Properties instead, like in other binding docs to make it clear that properties mentioned in the section are mandatory
On 09/08/2019 05:54, Vinod Koul wrote:
On 08-08-19, 20:52, Mark Brown wrote:
On Thu, Aug 08, 2019 at 05:48:56PM +0100, Srinivas Kandagatla wrote:
On 08/08/2019 16:58, Pierre-Louis Bossart wrote:
+- sdw-instance-id: Should be ('Instance ID') from SoundWire + Enumeration Address. Instance ID is for the cases + where multiple Devices of the same type or Class + are attached to the bus.
so it is actually required if you have a single Slave device? Or is it only required when you have more than 1 device of the same type?
This is mandatory for any slave device!
If it's mandatory the wording is a bit unclear. How about something like:
Should be ('Instance ID') from the SoundWire Enumeration Address. This must always be provided, if multiple devices with the same type or class or attached to the bus each instance must have a distinct value.
That helps to make it clear.
Also the section of properties starts with Mandatory property, it should be made Mandatory Properties instead, like in other binding docs to make it clear that properties mentioned in the section are mandatory
Will update as suggested!
thanks, srini
On 08-08-19, 15:45, Srinivas Kandagatla wrote:
This patch adds bindings for Soundwire Slave devices which includes how SoundWire enumeration address is represented in SoundWire slave device tree nodes.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org
.../devicetree/bindings/soundwire/slave.txt | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/soundwire/slave.txt
diff --git a/Documentation/devicetree/bindings/soundwire/slave.txt b/Documentation/devicetree/bindings/soundwire/slave.txt new file mode 100644 index 000000000000..b8e8d34bbc92 --- /dev/null +++ b/Documentation/devicetree/bindings/soundwire/slave.txt @@ -0,0 +1,46 @@ +SoundWire slave device bindings.
+SoundWire is a 2-pin multi-drop interface with data and clock line. +It facilitates development of low cost, efficient, high performance systems.
+SoundWire slave devices: +Every SoundWire controller node can contain zero or more child nodes +representing slave devices on the bus. Every SoundWire slave device is +uniquely determined by the enumeration address containing 5 fields: +SoundWire Version, Instance ID, Manufacturer ID, Part ID and Class ID +for a device. Addition to below required properties, child nodes can
It would help to list them rather than free flowing text
+have device specific bindings.
+Required property for SoundWire child node if it is present:
As said earlier, lets make it "Required properties:"
+- compatible: "sdwVER,MFD,PID,CID". The textual representation of
SoundWire Enumeration address comprising SoundWireVersion, Manufacturer ID, Part ID and Class ID,shall be in lower-case hexadecimal with leadingzeroes suppressed.Version number '0x10' represents SoundWire 1.0Version number '0x11' represents SoundWire 1.1ex: "sdw10,0217,2010,0"+- sdw-instance-id: Should be ('Instance ID') from SoundWire
Enumeration Address. Instance ID is for the caseswhere multiple Devices of the same type or Classare attached to the bus.+SoundWire example for Qualcomm's SoundWire controller:
+soundwire@c2d0000 {
- compatible = "qcom,soundwire-v1.5.0"
- reg = <0x0c2d0000 0x2000>;
- spkr_left:wsa8810-left{
compatible = "sdw10,0217,2010,0";sdw-instance-id = <1>;...- };
- spkr_right:wsa8810-right{
compatible = "sdw10,0217,2010,0";sdw-instance-id = <2>;...- };
+};
2.21.0
This patch adds support to parsing device tree based SoundWire slave devices.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- drivers/soundwire/bus.c | 2 ++ drivers/soundwire/bus.h | 1 + drivers/soundwire/slave.c | 47 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index fe745830a261..324c54dc52fb 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -77,6 +77,8 @@ int sdw_add_bus_master(struct sdw_bus *bus) */ if (IS_ENABLED(CONFIG_ACPI) && ACPI_HANDLE(bus->dev)) ret = sdw_acpi_find_slaves(bus); + else if (IS_ENABLED(CONFIG_OF) && bus->dev->of_node) + ret = sdw_of_find_slaves(bus); else ret = -ENOTSUPP; /* No ACPI/DT so error out */
diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 3048ca153f22..ee46befedbd1 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -15,6 +15,7 @@ static inline int sdw_acpi_find_slaves(struct sdw_bus *bus) } #endif
+int sdw_of_find_slaves(struct sdw_bus *bus); void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c index f39a5815e25d..8ab76f5d5a56 100644 --- a/drivers/soundwire/slave.c +++ b/drivers/soundwire/slave.c @@ -2,6 +2,7 @@ // Copyright(c) 2015-17 Intel Corporation.
#include <linux/acpi.h> +#include <linux/of.h> #include <linux/soundwire/sdw.h> #include <linux/soundwire/sdw_type.h> #include "bus.h" @@ -35,6 +36,7 @@ static int sdw_slave_add(struct sdw_bus *bus,
slave->dev.release = sdw_slave_release; slave->dev.bus = &sdw_bus_type; + slave->dev.of_node = of_node_get(to_of_node(fwnode)); slave->bus = bus; slave->status = SDW_SLAVE_UNATTACHED; slave->dev_num = 0; @@ -112,3 +114,48 @@ int sdw_acpi_find_slaves(struct sdw_bus *bus) }
#endif + +/* + * sdw_of_find_slaves() - Find Slave devices in master device tree node + * @bus: SDW bus instance + * + * Scans Master DT node for SDW child Slave devices and registers it. + */ +int sdw_of_find_slaves(struct sdw_bus *bus) +{ + struct device *dev = bus->dev; + struct device_node *node; + + for_each_child_of_node(bus->dev->of_node, node) { + struct sdw_slave_id id; + const char *compat = NULL; + int unique_id, ret; + int ver, mfg_id, part_id, class_id; + + compat = of_get_property(node, "compatible", NULL); + if (!compat) + continue; + + ret = sscanf(compat, "sdw%x,%x,%x,%x", + &ver, &mfg_id, &part_id, &class_id); + if (ret != 4) { + dev_err(dev, "Manf ID & Product code not found %s\n", + compat); + continue; + } + + ret = of_property_read_u32(node, "sdw-instance-id", &unique_id); + if (ret) { + dev_err(dev, "Instance id not found:%d\n", ret); + continue; + } + + id.sdw_version = ver - 0xF; + id.unique_id = unique_id; + id.mfg_id = mfg_id; + id.part_id = part_id; + id.class_id = class_id; + sdw_slave_add(bus, &id, of_fwnode_handle(node)); + } + return 0; +}
@@ -35,6 +36,7 @@ static int sdw_slave_add(struct sdw_bus *bus,
slave->dev.release = sdw_slave_release; slave->dev.bus = &sdw_bus_type;
- slave->dev.of_node = of_node_get(to_of_node(fwnode));
shouldn't this protected by #if IS_ENABLED(CONFIG_OF) ?
slave->bus = bus; slave->status = SDW_SLAVE_UNATTACHED; slave->dev_num = 0; @@ -112,3 +114,48 @@ int sdw_acpi_find_slaves(struct sdw_bus *bus) }
#endif
+/*
- sdw_of_find_slaves() - Find Slave devices in master device tree node
- @bus: SDW bus instance
- Scans Master DT node for SDW child Slave devices and registers it.
- */
+int sdw_of_find_slaves(struct sdw_bus *bus) +{
- struct device *dev = bus->dev;
- struct device_node *node;
- for_each_child_of_node(bus->dev->of_node, node) {
struct sdw_slave_id id;const char *compat = NULL;int unique_id, ret;int ver, mfg_id, part_id, class_id;compat = of_get_property(node, "compatible", NULL);if (!compat)continue;ret = sscanf(compat, "sdw%x,%x,%x,%x",&ver, &mfg_id, &part_id, &class_id);if (ret != 4) {dev_err(dev, "Manf ID & Product code not found %s\n",compat);continue;}ret = of_property_read_u32(node, "sdw-instance-id", &unique_id);if (ret) {dev_err(dev, "Instance id not found:%d\n", ret);continue;
I am confused here. If you have two identical devices on the same link, isn't this property required and that should be a real error instead of a continue?
}id.sdw_version = ver - 0xF;
maybe a comment in the code would help to make the encoding self-explanatory, as you did in the DT bindings
Version number '0x10' represents SoundWire 1.0 Version number '0x11' represents SoundWire 1.1
id.unique_id = unique_id;id.mfg_id = mfg_id;id.part_id = part_id;id.class_id = class_id;sdw_slave_add(bus, &id, of_fwnode_handle(node));- }
- return 0;
+}
Thanks for taking time to review.
On 08/08/2019 16:00, Pierre-Louis Bossart wrote:
@@ -35,6 +36,7 @@ static int sdw_slave_add(struct sdw_bus *bus, slave->dev.release = sdw_slave_release; slave->dev.bus = &sdw_bus_type; + slave->dev.of_node = of_node_get(to_of_node(fwnode));
shouldn't this protected by #if IS_ENABLED(CONFIG_OF) ?
These macros and functions have dummy entries, so it should not be an issue. I did build soundwire with i386_defconfig with no issues.
slave->bus = bus; slave->status = SDW_SLAVE_UNATTACHED; slave->dev_num = 0; @@ -112,3 +114,48 @@ int sdw_acpi_find_slaves(struct sdw_bus *bus) } #endif
+/*
- sdw_of_find_slaves() - Find Slave devices in master device tree node
- @bus: SDW bus instance
- Scans Master DT node for SDW child Slave devices and registers it.
- */
+int sdw_of_find_slaves(struct sdw_bus *bus) +{ + struct device *dev = bus->dev; + struct device_node *node;
+ for_each_child_of_node(bus->dev->of_node, node) { + struct sdw_slave_id id; + const char *compat = NULL; + int unique_id, ret; + int ver, mfg_id, part_id, class_id;
+ compat = of_get_property(node, "compatible", NULL); + if (!compat) + continue;
+ ret = sscanf(compat, "sdw%x,%x,%x,%x", + &ver, &mfg_id, &part_id, &class_id); + if (ret != 4) { + dev_err(dev, "Manf ID & Product code not found %s\n", + compat); + continue; + }
+ ret = of_property_read_u32(node, "sdw-instance-id", &unique_id); + if (ret) { + dev_err(dev, "Instance id not found:%d\n", ret); + continue;
I am confused here. If you have two identical devices on the same link, isn't this property required and that should be a real error instead of a continue?
Yes, I agree it will be mandatory in such cases.
Am okay either way, I dont mind changing it to returning EINVAL in all the cases.
+ }
+ id.sdw_version = ver - 0xF;
maybe a comment in the code would help to make the encoding self-explanatory, as you did in the DT bindings
Version number '0x10' represents SoundWire 1.0 Version number '0x11' represents SoundWire 1.1
Makes sense, will fix this in next version. This info is also available in bindings.
--srini
+ id.unique_id = unique_id; + id.mfg_id = mfg_id; + id.part_id = part_id; + id.class_id = class_id; + sdw_slave_add(bus, &id, of_fwnode_handle(node)); + } + return 0; +}
On 08-08-19, 16:17, Srinivas Kandagatla wrote:
Thanks for taking time to review.
On 08/08/2019 16:00, Pierre-Louis Bossart wrote:
@@ -35,6 +36,7 @@ static int sdw_slave_add(struct sdw_bus *bus, slave->dev.release = sdw_slave_release; slave->dev.bus = &sdw_bus_type; + slave->dev.of_node = of_node_get(to_of_node(fwnode));
shouldn't this protected by #if IS_ENABLED(CONFIG_OF) ?
These macros and functions have dummy entries, so it should not be an issue. I did build soundwire with i386_defconfig with no issues.
That means this function was compiled without errors, that is not strange nowadays given the ARM compiles ACPI and x86 OF, so check with OF being disable just to be safe :) I think dummy entries are helping
slave->bus = bus; slave->status = SDW_SLAVE_UNATTACHED; slave->dev_num = 0; @@ -112,3 +114,48 @@ int sdw_acpi_find_slaves(struct sdw_bus *bus) } #endif
+/*
- sdw_of_find_slaves() - Find Slave devices in master device tree node
- @bus: SDW bus instance
- Scans Master DT node for SDW child Slave devices and registers it.
- */
+int sdw_of_find_slaves(struct sdw_bus *bus) +{ + struct device *dev = bus->dev; + struct device_node *node;
+ for_each_child_of_node(bus->dev->of_node, node) { + struct sdw_slave_id id; + const char *compat = NULL; + int unique_id, ret; + int ver, mfg_id, part_id, class_id;
+ compat = of_get_property(node, "compatible", NULL); + if (!compat) + continue;
+ ret = sscanf(compat, "sdw%x,%x,%x,%x", + &ver, &mfg_id, &part_id, &class_id); + if (ret != 4) { + dev_err(dev, "Manf ID & Product code not found %s\n", + compat); + continue; + }
+ ret = of_property_read_u32(node, "sdw-instance-id", &unique_id); + if (ret) { + dev_err(dev, "Instance id not found:%d\n", ret); + continue;
I am confused here. If you have two identical devices on the same link, isn't this property required and that should be a real error instead of a continue?
Yes, I agree it will be mandatory in such cases.
Am okay either way, I dont mind changing it to returning EINVAL in all the cases.
Do we want to abort? We are in loop scanning for devices so makes sense if we do not do that and continue to check next one..
On 09/08/2019 06:46, Vinod Koul wrote:
+int sdw_of_find_slaves(struct sdw_bus *bus) +{ + struct device *dev = bus->dev; + struct device_node *node;
+ for_each_child_of_node(bus->dev->of_node, node) { + struct sdw_slave_id id; + const char *compat = NULL; + int unique_id, ret; + int ver, mfg_id, part_id, class_id;
+ compat = of_get_property(node, "compatible", NULL); + if (!compat) + continue;
+ ret = sscanf(compat, "sdw%x,%x,%x,%x", + &ver, &mfg_id, &part_id, &class_id); + if (ret != 4) { + dev_err(dev, "Manf ID & Product code not found %s\n", + compat); + continue; + }
+ ret = of_property_read_u32(node, "sdw-instance-id", &unique_id); + if (ret) { + dev_err(dev, "Instance id not found:%d\n", ret); + continue;
I am confused here. If you have two identical devices on the same link, isn't this property required and that should be a real error instead of a continue?
Yes, I agree it will be mandatory in such cases.
Am okay either way, I dont mind changing it to returning EINVAL in all the cases.
Do we want to abort? We are in loop scanning for devices so makes sense if we do not do that and continue to check next one..
That was my inital plan. Pierre suggested a better compatible to include instance ID and LinkID so this check would be part of the check one before this line.
--srini
On 08-08-19, 15:45, Srinivas Kandagatla wrote:
This patch adds support to parsing device tree based SoundWire slave devices.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org
drivers/soundwire/bus.c | 2 ++ drivers/soundwire/bus.h | 1 + drivers/soundwire/slave.c | 47 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index fe745830a261..324c54dc52fb 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -77,6 +77,8 @@ int sdw_add_bus_master(struct sdw_bus *bus) */ if (IS_ENABLED(CONFIG_ACPI) && ACPI_HANDLE(bus->dev)) ret = sdw_acpi_find_slaves(bus);
- else if (IS_ENABLED(CONFIG_OF) && bus->dev->of_node)
ret = sdw_of_find_slaves(bus);diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 3048ca153f22..ee46befedbd1 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -15,6 +15,7 @@ static inline int sdw_acpi_find_slaves(struct sdw_bus *bus) } #endif
+int sdw_of_find_slaves(struct sdw_bus *bus); void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c index f39a5815e25d..8ab76f5d5a56 100644 --- a/drivers/soundwire/slave.c +++ b/drivers/soundwire/slave.c @@ -2,6 +2,7 @@ // Copyright(c) 2015-17 Intel Corporation.
#include <linux/acpi.h> +#include <linux/of.h> #include <linux/soundwire/sdw.h> #include <linux/soundwire/sdw_type.h> #include "bus.h" @@ -35,6 +36,7 @@ static int sdw_slave_add(struct sdw_bus *bus,
slave->dev.release = sdw_slave_release; slave->dev.bus = &sdw_bus_type;
- slave->dev.of_node = of_node_get(to_of_node(fwnode)); slave->bus = bus; slave->status = SDW_SLAVE_UNATTACHED; slave->dev_num = 0;
@@ -112,3 +114,48 @@ int sdw_acpi_find_slaves(struct sdw_bus *bus) }
#endif
+/*
- sdw_of_find_slaves() - Find Slave devices in master device tree node
- @bus: SDW bus instance
- Scans Master DT node for SDW child Slave devices and registers it.
- */
+int sdw_of_find_slaves(struct sdw_bus *bus) +{
- struct device *dev = bus->dev;
- struct device_node *node;
- for_each_child_of_node(bus->dev->of_node, node) {
struct sdw_slave_id id;const char *compat = NULL;int unique_id, ret;int ver, mfg_id, part_id, class_id;compat = of_get_property(node, "compatible", NULL);if (!compat)continue;
Why not use of_find_compatible_node() that will return the node which is sdw* and we dont need to checks on that..
ret = sscanf(compat, "sdw%x,%x,%x,%x",&ver, &mfg_id, &part_id, &class_id);if (ret != 4) {dev_err(dev, "Manf ID & Product code not found %s\n",compat);continue;}ret = of_property_read_u32(node, "sdw-instance-id", &unique_id);if (ret) {dev_err(dev, "Instance id not found:%d\n", ret);continue;}id.sdw_version = ver - 0xF;id.unique_id = unique_id;id.mfg_id = mfg_id;id.part_id = part_id;id.class_id = class_id;
empty line here please
sdw_slave_add(bus, &id, of_fwnode_handle(node));- }
and here as well
- return 0;
+}
2.21.0
On 09/08/2019 06:07, Vinod Koul wrote:
On 08-08-19, 15:45, Srinivas Kandagatla wrote:
This patch adds support to parsing device tree based SoundWire slave devices.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org
drivers/soundwire/bus.c | 2 ++ drivers/soundwire/bus.h | 1 + drivers/soundwire/slave.c | 47 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index fe745830a261..324c54dc52fb 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -77,6 +77,8 @@ int sdw_add_bus_master(struct sdw_bus *bus) */ if (IS_ENABLED(CONFIG_ACPI) && ACPI_HANDLE(bus->dev)) ret = sdw_acpi_find_slaves(bus);
- else if (IS_ENABLED(CONFIG_OF) && bus->dev->of_node)
ret = sdw_of_find_slaves(bus);diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 3048ca153f22..ee46befedbd1 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -15,6 +15,7 @@ static inline int sdw_acpi_find_slaves(struct sdw_bus *bus) } #endif
+int sdw_of_find_slaves(struct sdw_bus *bus); void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c index f39a5815e25d..8ab76f5d5a56 100644 --- a/drivers/soundwire/slave.c +++ b/drivers/soundwire/slave.c @@ -2,6 +2,7 @@ // Copyright(c) 2015-17 Intel Corporation.
#include <linux/acpi.h> +#include <linux/of.h> #include <linux/soundwire/sdw.h> #include <linux/soundwire/sdw_type.h> #include "bus.h" @@ -35,6 +36,7 @@ static int sdw_slave_add(struct sdw_bus *bus,
slave->dev.release = sdw_slave_release; slave->dev.bus = &sdw_bus_type;
- slave->dev.of_node = of_node_get(to_of_node(fwnode)); slave->bus = bus; slave->status = SDW_SLAVE_UNATTACHED; slave->dev_num = 0;
@@ -112,3 +114,48 @@ int sdw_acpi_find_slaves(struct sdw_bus *bus) }
#endif
+/*
- sdw_of_find_slaves() - Find Slave devices in master device tree node
- @bus: SDW bus instance
- Scans Master DT node for SDW child Slave devices and registers it.
- */
+int sdw_of_find_slaves(struct sdw_bus *bus) +{
- struct device *dev = bus->dev;
- struct device_node *node;
- for_each_child_of_node(bus->dev->of_node, node) {
struct sdw_slave_id id;const char *compat = NULL;int unique_id, ret;int ver, mfg_id, part_id, class_id;compat = of_get_property(node, "compatible", NULL);if (!compat)continue;Why not use of_find_compatible_node() that will return the node which is sdw* and we dont need to checks on that..
Am not sure if wild characters are really supported in this api. Also AFIU, it would not very optimal to use this api and it would complicate the code without much gain.
ret = sscanf(compat, "sdw%x,%x,%x,%x",&ver, &mfg_id, &part_id, &class_id);if (ret != 4) {dev_err(dev, "Manf ID & Product code not found %s\n",compat);continue;}ret = of_property_read_u32(node, "sdw-instance-id", &unique_id);if (ret) {dev_err(dev, "Instance id not found:%d\n", ret);continue;}id.sdw_version = ver - 0xF;id.unique_id = unique_id;id.mfg_id = mfg_id;id.part_id = part_id;id.class_id = class_id;empty line here please
yep, will add that.
thanks, srini
sdw_slave_add(bus, &id, of_fwnode_handle(node));- }
and here as well
- return 0;
+}
2.21.0
This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker Amplifier. This Amplifier also has a simple thermal sensor for over temperature and speaker protection.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- .../bindings/sound/qcom,wsa881x.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.txt
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt b/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt new file mode 100644 index 000000000000..582db402a482 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt @@ -0,0 +1,27 @@ +Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier + +WSA8810 is a class-D smart speaker amplifier and WSA8815 is a high-output +power class-D smart speaker amplifier. This amplifier uses SoundWire +digital audio as primary interface. + +Required properties with SoundWire Interface: + +- compatible: Should be textual representation of SoundWire Enumeration + address. + Refer to soundwire/bus.txt for details. + Should be "sdw10,0217,2010,0" for WSA8810 +- sdw-instance-id: Should be ('Instance ID') from SoundWire Enumeration + address. + Refer to soundwire/bus.txt for details. +- pd-gpios: Should be phandle and gpio pair for + Powerdown/Shutdown pin. +- #thermal-sensor-cells: Should be 0 + +Example: + +spkr_left:wsa8810-left{ + compatible = "sdw10,0217,2010,0"; + sdw-instance-id = <1>; + #thermal-sensor-cells = <0>; + ... +};
This patch adds support to WSA8810/WSA8815 Class-D Smart Speaker Amplifier. This Amplifier is primarily interfaced with SoundWire. One WSA is used for mono speaker configuration and second one would give stereo setup.
This patch is tested on SDM845 based DragonBoard DB845c.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wsa881x.c | 1160 ++++++++++++++++++++++++++++++++++++ 3 files changed, 1172 insertions(+) create mode 100644 sound/soc/codecs/wsa881x.c
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 89238343e34d..9f8fa1016d22 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -203,6 +203,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_UDA134X select SND_SOC_UDA1380 if I2C select SND_SOC_WCD9335 if SLIMBUS + select SND_SOC_WSA881X if SOUNDWIRE select SND_SOC_WL1273 if MFD_WL1273_CORE select SND_SOC_WM0010 if SPI_MASTER select SND_SOC_WM1250_EV1 if I2C @@ -1233,6 +1234,15 @@ config SND_SOC_WCD9335 Qualcomm Technologies, Inc. (QTI) multimedia solutions, including the MSM8996, MSM8976, and MSM8956 chipsets.
+config SND_SOC_WSA881X + tristate "WSA881X Codec" + depends on SOUNDWIRE + select REGMAP_SOUNDWIRE + tristate + help + This enables support for Qualcomm WSA8810/WSA8815 Class-D + Smart Speaker Amplifier. + config SND_SOC_WL1273 tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index c498373dcc5f..ab07becf31f8 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -216,6 +216,7 @@ snd-soc-uda1334-objs := uda1334.o snd-soc-uda134x-objs := uda134x.o snd-soc-uda1380-objs := uda1380.o snd-soc-wcd9335-objs := wcd-clsh-v2.o wcd9335.o +snd-soc-wsa881x-objs := wsa881x.o snd-soc-wl1273-objs := wl1273.o snd-soc-wm-adsp-objs := wm_adsp.o snd-soc-wm0010-objs := wm0010.o @@ -499,6 +500,7 @@ obj-$(CONFIG_SND_SOC_UDA1334) += snd-soc-uda1334.o obj-$(CONFIG_SND_SOC_UDA134X) += snd-soc-uda134x.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o obj-$(CONFIG_SND_SOC_WCD9335) += snd-soc-wcd9335.o +obj-$(CONFIG_SND_SOC_WSA881X) += snd-soc-wsa881x.o obj-$(CONFIG_SND_SOC_WL1273) += snd-soc-wl1273.o obj-$(CONFIG_SND_SOC_WM0010) += snd-soc-wm0010.o obj-$(CONFIG_SND_SOC_WM1250_EV1) += snd-soc-wm1250-ev1.o diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c new file mode 100644 index 000000000000..7bf72b3e6f7c --- /dev/null +++ b/sound/soc/codecs/wsa881x.c @@ -0,0 +1,1160 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2015-2017, The Linux Foundation. +// Copyright (c) 2019, Linaro Limited + +#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#define WSA881X_DIGITAL_BASE 0x3000 +#define WSA881X_ANALOG_BASE 0x3100 + +/* Digital register address space */ +#define WSA881X_CHIP_ID0 (WSA881X_DIGITAL_BASE + 0x0000) +#define WSA881X_CHIP_ID1 (WSA881X_DIGITAL_BASE + 0x0001) +#define WSA881X_CHIP_ID2 (WSA881X_DIGITAL_BASE + 0x0002) +#define WSA881X_CHIP_ID3 (WSA881X_DIGITAL_BASE + 0x0003) +#define WSA881X_BUS_ID (WSA881X_DIGITAL_BASE + 0x0004) +#define WSA881X_CDC_RST_CTL (WSA881X_DIGITAL_BASE + 0x0005) +#define WSA881X_CDC_TOP_CLK_CTL (WSA881X_DIGITAL_BASE + 0x0006) +#define WSA881X_CDC_ANA_CLK_CTL (WSA881X_DIGITAL_BASE + 0x0007) +#define WSA881X_CDC_DIG_CLK_CTL (WSA881X_DIGITAL_BASE + 0x0008) +#define WSA881X_CLOCK_CONFIG (WSA881X_DIGITAL_BASE + 0x0009) +#define WSA881X_ANA_CTL (WSA881X_DIGITAL_BASE + 0x000A) +#define WSA881X_SWR_RESET_EN (WSA881X_DIGITAL_BASE + 0x000B) +#define WSA881X_RESET_CTL (WSA881X_DIGITAL_BASE + 0x000C) +#define WSA881X_TADC_VALUE_CTL (WSA881X_DIGITAL_BASE + 0x000F) +#define WSA881X_TEMP_DETECT_CTL (WSA881X_DIGITAL_BASE + 0x0010) +#define WSA881X_TEMP_MSB (WSA881X_DIGITAL_BASE + 0x0011) +#define WSA881X_TEMP_LSB (WSA881X_DIGITAL_BASE + 0x0012) +#define WSA881X_TEMP_CONFIG0 (WSA881X_DIGITAL_BASE + 0x0013) +#define WSA881X_TEMP_CONFIG1 (WSA881X_DIGITAL_BASE + 0x0014) +#define WSA881X_CDC_CLIP_CTL (WSA881X_DIGITAL_BASE + 0x0015) +#define WSA881X_SDM_PDM9_LSB (WSA881X_DIGITAL_BASE + 0x0016) +#define WSA881X_SDM_PDM9_MSB (WSA881X_DIGITAL_BASE + 0x0017) +#define WSA881X_CDC_RX_CTL (WSA881X_DIGITAL_BASE + 0x0018) +#define WSA881X_DEM_BYPASS_DATA0 (WSA881X_DIGITAL_BASE + 0x0019) +#define WSA881X_DEM_BYPASS_DATA1 (WSA881X_DIGITAL_BASE + 0x001A) +#define WSA881X_DEM_BYPASS_DATA2 (WSA881X_DIGITAL_BASE + 0x001B) +#define WSA881X_DEM_BYPASS_DATA3 (WSA881X_DIGITAL_BASE + 0x001C) +#define WSA881X_OTP_CTRL0 (WSA881X_DIGITAL_BASE + 0x001D) +#define WSA881X_OTP_CTRL1 (WSA881X_DIGITAL_BASE + 0x001E) +#define WSA881X_HDRIVE_CTL_GROUP1 (WSA881X_DIGITAL_BASE + 0x001F) +#define WSA881X_INTR_MODE (WSA881X_DIGITAL_BASE + 0x0020) +#define WSA881X_INTR_MASK (WSA881X_DIGITAL_BASE + 0x0021) +#define WSA881X_INTR_STATUS (WSA881X_DIGITAL_BASE + 0x0022) +#define WSA881X_INTR_CLEAR (WSA881X_DIGITAL_BASE + 0x0023) +#define WSA881X_INTR_LEVEL (WSA881X_DIGITAL_BASE + 0x0024) +#define WSA881X_INTR_SET (WSA881X_DIGITAL_BASE + 0x0025) +#define WSA881X_INTR_TEST (WSA881X_DIGITAL_BASE + 0x0026) +#define WSA881X_PDM_TEST_MODE (WSA881X_DIGITAL_BASE + 0x0030) +#define WSA881X_ATE_TEST_MODE (WSA881X_DIGITAL_BASE + 0x0031) +#define WSA881X_PIN_CTL_MODE (WSA881X_DIGITAL_BASE + 0x0032) +#define WSA881X_PIN_CTL_OE (WSA881X_DIGITAL_BASE + 0x0033) +#define WSA881X_PIN_WDATA_IOPAD (WSA881X_DIGITAL_BASE + 0x0034) +#define WSA881X_PIN_STATUS (WSA881X_DIGITAL_BASE + 0x0035) +#define WSA881X_DIG_DEBUG_MODE (WSA881X_DIGITAL_BASE + 0x0037) +#define WSA881X_DIG_DEBUG_SEL (WSA881X_DIGITAL_BASE + 0x0038) +#define WSA881X_DIG_DEBUG_EN (WSA881X_DIGITAL_BASE + 0x0039) +#define WSA881X_SWR_HM_TEST1 (WSA881X_DIGITAL_BASE + 0x003B) +#define WSA881X_SWR_HM_TEST2 (WSA881X_DIGITAL_BASE + 0x003C) +#define WSA881X_TEMP_DETECT_DBG_CTL (WSA881X_DIGITAL_BASE + 0x003D) +#define WSA881X_TEMP_DEBUG_MSB (WSA881X_DIGITAL_BASE + 0x003E) +#define WSA881X_TEMP_DEBUG_LSB (WSA881X_DIGITAL_BASE + 0x003F) +#define WSA881X_SAMPLE_EDGE_SEL (WSA881X_DIGITAL_BASE + 0x0044) +#define WSA881X_IOPAD_CTL (WSA881X_DIGITAL_BASE + 0x0045) +#define WSA881X_SPARE_0 (WSA881X_DIGITAL_BASE + 0x0050) +#define WSA881X_SPARE_1 (WSA881X_DIGITAL_BASE + 0x0051) +#define WSA881X_SPARE_2 (WSA881X_DIGITAL_BASE + 0x0052) +#define WSA881X_OTP_REG_0 (WSA881X_DIGITAL_BASE + 0x0080) +#define WSA881X_OTP_REG_1 (WSA881X_DIGITAL_BASE + 0x0081) +#define WSA881X_OTP_REG_2 (WSA881X_DIGITAL_BASE + 0x0082) +#define WSA881X_OTP_REG_3 (WSA881X_DIGITAL_BASE + 0x0083) +#define WSA881X_OTP_REG_4 (WSA881X_DIGITAL_BASE + 0x0084) +#define WSA881X_OTP_REG_5 (WSA881X_DIGITAL_BASE + 0x0085) +#define WSA881X_OTP_REG_6 (WSA881X_DIGITAL_BASE + 0x0086) +#define WSA881X_OTP_REG_7 (WSA881X_DIGITAL_BASE + 0x0087) +#define WSA881X_OTP_REG_8 (WSA881X_DIGITAL_BASE + 0x0088) +#define WSA881X_OTP_REG_9 (WSA881X_DIGITAL_BASE + 0x0089) +#define WSA881X_OTP_REG_10 (WSA881X_DIGITAL_BASE + 0x008A) +#define WSA881X_OTP_REG_11 (WSA881X_DIGITAL_BASE + 0x008B) +#define WSA881X_OTP_REG_12 (WSA881X_DIGITAL_BASE + 0x008C) +#define WSA881X_OTP_REG_13 (WSA881X_DIGITAL_BASE + 0x008D) +#define WSA881X_OTP_REG_14 (WSA881X_DIGITAL_BASE + 0x008E) +#define WSA881X_OTP_REG_15 (WSA881X_DIGITAL_BASE + 0x008F) +#define WSA881X_OTP_REG_16 (WSA881X_DIGITAL_BASE + 0x0090) +#define WSA881X_OTP_REG_17 (WSA881X_DIGITAL_BASE + 0x0091) +#define WSA881X_OTP_REG_18 (WSA881X_DIGITAL_BASE + 0x0092) +#define WSA881X_OTP_REG_19 (WSA881X_DIGITAL_BASE + 0x0093) +#define WSA881X_OTP_REG_20 (WSA881X_DIGITAL_BASE + 0x0094) +#define WSA881X_OTP_REG_21 (WSA881X_DIGITAL_BASE + 0x0095) +#define WSA881X_OTP_REG_22 (WSA881X_DIGITAL_BASE + 0x0096) +#define WSA881X_OTP_REG_23 (WSA881X_DIGITAL_BASE + 0x0097) +#define WSA881X_OTP_REG_24 (WSA881X_DIGITAL_BASE + 0x0098) +#define WSA881X_OTP_REG_25 (WSA881X_DIGITAL_BASE + 0x0099) +#define WSA881X_OTP_REG_26 (WSA881X_DIGITAL_BASE + 0x009A) +#define WSA881X_OTP_REG_27 (WSA881X_DIGITAL_BASE + 0x009B) +#define WSA881X_OTP_REG_28 (WSA881X_DIGITAL_BASE + 0x009C) +#define WSA881X_OTP_REG_29 (WSA881X_DIGITAL_BASE + 0x009D) +#define WSA881X_OTP_REG_30 (WSA881X_DIGITAL_BASE + 0x009E) +#define WSA881X_OTP_REG_31 (WSA881X_DIGITAL_BASE + 0x009F) +#define WSA881X_OTP_REG_63 (WSA881X_DIGITAL_BASE + 0x00BF) + +/* Analog Register address space */ +#define WSA881X_BIAS_REF_CTRL (WSA881X_ANALOG_BASE + 0x0000) +#define WSA881X_BIAS_TEST (WSA881X_ANALOG_BASE + 0x0001) +#define WSA881X_BIAS_BIAS (WSA881X_ANALOG_BASE + 0x0002) +#define WSA881X_TEMP_OP (WSA881X_ANALOG_BASE + 0x0003) +#define WSA881X_TEMP_IREF_CTRL (WSA881X_ANALOG_BASE + 0x0004) +#define WSA881X_TEMP_ISENS_CTRL (WSA881X_ANALOG_BASE + 0x0005) +#define WSA881X_TEMP_CLK_CTRL (WSA881X_ANALOG_BASE + 0x0006) +#define WSA881X_TEMP_TEST (WSA881X_ANALOG_BASE + 0x0007) +#define WSA881X_TEMP_BIAS (WSA881X_ANALOG_BASE + 0x0008) +#define WSA881X_TEMP_ADC_CTRL (WSA881X_ANALOG_BASE + 0x0009) +#define WSA881X_TEMP_DOUT_MSB (WSA881X_ANALOG_BASE + 0x000A) +#define WSA881X_TEMP_DOUT_LSB (WSA881X_ANALOG_BASE + 0x000B) +#define WSA881X_ADC_EN_MODU_V (WSA881X_ANALOG_BASE + 0x0010) +#define WSA881X_ADC_EN_MODU_I (WSA881X_ANALOG_BASE + 0x0011) +#define WSA881X_ADC_EN_DET_TEST_V (WSA881X_ANALOG_BASE + 0x0012) +#define WSA881X_ADC_EN_DET_TEST_I (WSA881X_ANALOG_BASE + 0x0013) +#define WSA881X_ADC_SEL_IBIAS (WSA881X_ANALOG_BASE + 0x0014) +#define WSA881X_ADC_EN_SEL_IBAIS (WSA881X_ANALOG_BASE + 0x0015) +#define WSA881X_SPKR_DRV_EN (WSA881X_ANALOG_BASE + 0x001A) +#define WSA881X_SPKR_DRV_GAIN (WSA881X_ANALOG_BASE + 0x001B) +#define WSA881X_SPKR_DAC_CTL (WSA881X_ANALOG_BASE + 0x001C) +#define WSA881X_SPKR_DRV_DBG (WSA881X_ANALOG_BASE + 0x001D) +#define WSA881X_SPKR_PWRSTG_DBG (WSA881X_ANALOG_BASE + 0x001E) +#define WSA881X_SPKR_OCP_CTL (WSA881X_ANALOG_BASE + 0x001F) +#define WSA881X_SPKR_CLIP_CTL (WSA881X_ANALOG_BASE + 0x0020) +#define WSA881X_SPKR_BBM_CTL (WSA881X_ANALOG_BASE + 0x0021) +#define WSA881X_SPKR_MISC_CTL1 (WSA881X_ANALOG_BASE + 0x0022) +#define WSA881X_SPKR_MISC_CTL2 (WSA881X_ANALOG_BASE + 0x0023) +#define WSA881X_SPKR_BIAS_INT (WSA881X_ANALOG_BASE + 0x0024) +#define WSA881X_SPKR_PA_INT (WSA881X_ANALOG_BASE + 0x0025) +#define WSA881X_SPKR_BIAS_CAL (WSA881X_ANALOG_BASE + 0x0026) +#define WSA881X_SPKR_BIAS_PSRR (WSA881X_ANALOG_BASE + 0x0027) +#define WSA881X_SPKR_STATUS1 (WSA881X_ANALOG_BASE + 0x0028) +#define WSA881X_SPKR_STATUS2 (WSA881X_ANALOG_BASE + 0x0029) +#define WSA881X_BOOST_EN_CTL (WSA881X_ANALOG_BASE + 0x002A) +#define WSA881X_BOOST_CURRENT_LIMIT (WSA881X_ANALOG_BASE + 0x002B) +#define WSA881X_BOOST_PS_CTL (WSA881X_ANALOG_BASE + 0x002C) +#define WSA881X_BOOST_PRESET_OUT1 (WSA881X_ANALOG_BASE + 0x002D) +#define WSA881X_BOOST_PRESET_OUT2 (WSA881X_ANALOG_BASE + 0x002E) +#define WSA881X_BOOST_FORCE_OUT (WSA881X_ANALOG_BASE + 0x002F) +#define WSA881X_BOOST_LDO_PROG (WSA881X_ANALOG_BASE + 0x0030) +#define WSA881X_BOOST_SLOPE_COMP_ISENSE_FB (WSA881X_ANALOG_BASE + 0x0031) +#define WSA881X_BOOST_RON_CTL (WSA881X_ANALOG_BASE + 0x0032) +#define WSA881X_BOOST_LOOP_STABILITY (WSA881X_ANALOG_BASE + 0x0033) +#define WSA881X_BOOST_ZX_CTL (WSA881X_ANALOG_BASE + 0x0034) +#define WSA881X_BOOST_START_CTL (WSA881X_ANALOG_BASE + 0x0035) +#define WSA881X_BOOST_MISC1_CTL (WSA881X_ANALOG_BASE + 0x0036) +#define WSA881X_BOOST_MISC2_CTL (WSA881X_ANALOG_BASE + 0x0037) +#define WSA881X_BOOST_MISC3_CTL (WSA881X_ANALOG_BASE + 0x0038) +#define WSA881X_BOOST_ATEST_CTL (WSA881X_ANALOG_BASE + 0x0039) +#define WSA881X_SPKR_PROT_FE_GAIN (WSA881X_ANALOG_BASE + 0x003A) +#define WSA881X_SPKR_PROT_FE_CM_LDO_SET (WSA881X_ANALOG_BASE + 0x003B) +#define WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET1 (WSA881X_ANALOG_BASE + 0x003C) +#define WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET2 (WSA881X_ANALOG_BASE + 0x003D) +#define WSA881X_SPKR_PROT_ATEST1 (WSA881X_ANALOG_BASE + 0x003E) +#define WSA881X_SPKR_PROT_ATEST2 (WSA881X_ANALOG_BASE + 0x003F) +#define WSA881X_SPKR_PROT_FE_VSENSE_VCM (WSA881X_ANALOG_BASE + 0x0040) +#define WSA881X_SPKR_PROT_FE_VSENSE_BIAS_SET1 (WSA881X_ANALOG_BASE + 0x0041) +#define WSA881X_BONGO_RESRV_REG1 (WSA881X_ANALOG_BASE + 0x0042) +#define WSA881X_BONGO_RESRV_REG2 (WSA881X_ANALOG_BASE + 0x0043) +#define WSA881X_SPKR_PROT_SAR (WSA881X_ANALOG_BASE + 0x0044) +#define WSA881X_SPKR_STATUS3 (WSA881X_ANALOG_BASE + 0x0045) + +#define SWRS_SCP_FRAME_CTRL_BANK(m) (0x60 + 0x10 * (m)) +#define SWRS_SCP_HOST_CLK_DIV2_CTL_BANK(m) (0xE0 + 0x10 * (m)) + +#define WSA881X_NUM_REGISTERS (WSA881X_SPKR_STATUS3 + 1) +#define WSA881X_MAX_REGISTER (WSA881X_NUM_REGISTERS - 1) +#define WSA881X_CACHE_SIZE WSA881X_NUM_REGISTERS +#define SWR_SLV_MAX_REG_ADDR 0x390 +#define SWR_SLV_START_REG_ADDR 0x40 +#define SWR_SLV_MAX_BUF_LEN 20 +#define BYTES_PER_LINE 12 +#define SWR_SLV_RD_BUF_LEN 8 +#define SWR_SLV_WR_BUF_LEN 32 +#define SWR_SLV_MAX_DEVICES 2 +#define WSA881X_MAX_SWR_PORTS 4 +#define WSA881X_VERSION_ENTRY_SIZE 27 +#define WSA881X_OCP_CTL_TIMER_SEC 2 +#define WSA881X_OCP_CTL_TEMP_CELSIUS 25 +#define WSA881X_OCP_CTL_POLL_TIMER_SEC 60 + +#define WSA881X_PA_GAIN_TLV(xname, reg, shift, max, invert, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ + SNDRV_CTL_ELEM_ACCESS_READWRITE,\ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\ + .put = wsa881x_put_pa_gain, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } + +static const u8 wsa881x_reg_readable[WSA881X_CACHE_SIZE] = { + [WSA881X_CHIP_ID0] = 1, + [WSA881X_CHIP_ID1] = 1, + [WSA881X_CHIP_ID2] = 1, + [WSA881X_CHIP_ID3] = 1, + [WSA881X_BUS_ID] = 1, + [WSA881X_CDC_RST_CTL] = 1, + [WSA881X_CDC_TOP_CLK_CTL] = 1, + [WSA881X_CDC_ANA_CLK_CTL] = 1, + [WSA881X_CDC_DIG_CLK_CTL] = 1, + [WSA881X_CLOCK_CONFIG] = 1, + [WSA881X_ANA_CTL] = 1, + [WSA881X_SWR_RESET_EN] = 1, + [WSA881X_RESET_CTL] = 1, + [WSA881X_TADC_VALUE_CTL] = 1, + [WSA881X_TEMP_DETECT_CTL] = 1, + [WSA881X_TEMP_MSB] = 1, + [WSA881X_TEMP_LSB] = 1, + [WSA881X_TEMP_CONFIG0] = 1, + [WSA881X_TEMP_CONFIG1] = 1, + [WSA881X_CDC_CLIP_CTL] = 1, + [WSA881X_SDM_PDM9_LSB] = 1, + [WSA881X_SDM_PDM9_MSB] = 1, + [WSA881X_CDC_RX_CTL] = 1, + [WSA881X_DEM_BYPASS_DATA0] = 1, + [WSA881X_DEM_BYPASS_DATA1] = 1, + [WSA881X_DEM_BYPASS_DATA2] = 1, + [WSA881X_DEM_BYPASS_DATA3] = 1, + [WSA881X_OTP_CTRL0] = 1, + [WSA881X_OTP_CTRL1] = 1, + [WSA881X_HDRIVE_CTL_GROUP1] = 1, + [WSA881X_INTR_MODE] = 1, + [WSA881X_INTR_MASK] = 1, + [WSA881X_INTR_STATUS] = 1, + [WSA881X_INTR_CLEAR] = 1, + [WSA881X_INTR_LEVEL] = 1, + [WSA881X_INTR_SET] = 1, + [WSA881X_INTR_TEST] = 1, + [WSA881X_PDM_TEST_MODE] = 1, + [WSA881X_ATE_TEST_MODE] = 1, + [WSA881X_PIN_CTL_MODE] = 1, + [WSA881X_PIN_CTL_OE] = 1, + [WSA881X_PIN_WDATA_IOPAD] = 1, + [WSA881X_PIN_STATUS] = 1, + [WSA881X_DIG_DEBUG_MODE] = 1, + [WSA881X_DIG_DEBUG_SEL] = 1, + [WSA881X_DIG_DEBUG_EN] = 1, + [WSA881X_SWR_HM_TEST1] = 1, + [WSA881X_SWR_HM_TEST2] = 1, + [WSA881X_TEMP_DETECT_DBG_CTL] = 1, + [WSA881X_TEMP_DEBUG_MSB] = 1, + [WSA881X_TEMP_DEBUG_LSB] = 1, + [WSA881X_SAMPLE_EDGE_SEL] = 1, + [WSA881X_IOPAD_CTL] = 1, + [WSA881X_SPARE_0] = 1, + [WSA881X_SPARE_1] = 1, + [WSA881X_SPARE_2] = 1, + [WSA881X_OTP_REG_0] = 1, + [WSA881X_OTP_REG_1] = 1, + [WSA881X_OTP_REG_2] = 1, + [WSA881X_OTP_REG_3] = 1, + [WSA881X_OTP_REG_4] = 1, + [WSA881X_OTP_REG_5] = 1, + [WSA881X_OTP_REG_6] = 1, + [WSA881X_OTP_REG_7] = 1, + [WSA881X_OTP_REG_8] = 1, + [WSA881X_OTP_REG_9] = 1, + [WSA881X_OTP_REG_10] = 1, + [WSA881X_OTP_REG_11] = 1, + [WSA881X_OTP_REG_12] = 1, + [WSA881X_OTP_REG_13] = 1, + [WSA881X_OTP_REG_14] = 1, + [WSA881X_OTP_REG_15] = 1, + [WSA881X_OTP_REG_16] = 1, + [WSA881X_OTP_REG_17] = 1, + [WSA881X_OTP_REG_18] = 1, + [WSA881X_OTP_REG_19] = 1, + [WSA881X_OTP_REG_20] = 1, + [WSA881X_OTP_REG_21] = 1, + [WSA881X_OTP_REG_22] = 1, + [WSA881X_OTP_REG_23] = 1, + [WSA881X_OTP_REG_24] = 1, + [WSA881X_OTP_REG_25] = 1, + [WSA881X_OTP_REG_26] = 1, + [WSA881X_OTP_REG_27] = 1, + [WSA881X_OTP_REG_28] = 1, + [WSA881X_OTP_REG_29] = 1, + [WSA881X_OTP_REG_30] = 1, + [WSA881X_OTP_REG_31] = 1, + [WSA881X_OTP_REG_63] = 1, + /* Analog Registers */ + [WSA881X_BIAS_REF_CTRL] = 1, + [WSA881X_BIAS_TEST] = 1, + [WSA881X_BIAS_BIAS] = 1, + [WSA881X_TEMP_OP] = 1, + [WSA881X_TEMP_IREF_CTRL] = 1, + [WSA881X_TEMP_ISENS_CTRL] = 1, + [WSA881X_TEMP_CLK_CTRL] = 1, + [WSA881X_TEMP_TEST] = 1, + [WSA881X_TEMP_BIAS] = 1, + [WSA881X_TEMP_ADC_CTRL] = 1, + [WSA881X_TEMP_DOUT_MSB] = 1, + [WSA881X_TEMP_DOUT_LSB] = 1, + [WSA881X_ADC_EN_MODU_V] = 1, + [WSA881X_ADC_EN_MODU_I] = 1, + [WSA881X_ADC_EN_DET_TEST_V] = 1, + [WSA881X_ADC_EN_DET_TEST_I] = 1, + [WSA881X_ADC_SEL_IBIAS] = 1, + [WSA881X_ADC_EN_SEL_IBAIS] = 1, + [WSA881X_SPKR_DRV_EN] = 1, + [WSA881X_SPKR_DRV_GAIN] = 1, + [WSA881X_SPKR_DAC_CTL] = 1, + [WSA881X_SPKR_DRV_DBG] = 1, + [WSA881X_SPKR_PWRSTG_DBG] = 1, + [WSA881X_SPKR_OCP_CTL] = 1, + [WSA881X_SPKR_CLIP_CTL] = 1, + [WSA881X_SPKR_BBM_CTL] = 1, + [WSA881X_SPKR_MISC_CTL1] = 1, + [WSA881X_SPKR_MISC_CTL2] = 1, + [WSA881X_SPKR_BIAS_INT] = 1, + [WSA881X_SPKR_PA_INT] = 1, + [WSA881X_SPKR_BIAS_CAL] = 1, + [WSA881X_SPKR_BIAS_PSRR] = 1, + [WSA881X_SPKR_STATUS1] = 1, + [WSA881X_SPKR_STATUS2] = 1, + [WSA881X_BOOST_EN_CTL] = 1, + [WSA881X_BOOST_CURRENT_LIMIT] = 1, + [WSA881X_BOOST_PS_CTL] = 1, + [WSA881X_BOOST_PRESET_OUT1] = 1, + [WSA881X_BOOST_PRESET_OUT2] = 1, + [WSA881X_BOOST_FORCE_OUT] = 1, + [WSA881X_BOOST_LDO_PROG] = 1, + [WSA881X_BOOST_SLOPE_COMP_ISENSE_FB] = 1, + [WSA881X_BOOST_RON_CTL] = 1, + [WSA881X_BOOST_LOOP_STABILITY] = 1, + [WSA881X_BOOST_ZX_CTL] = 1, + [WSA881X_BOOST_START_CTL] = 1, + [WSA881X_BOOST_MISC1_CTL] = 1, + [WSA881X_BOOST_MISC2_CTL] = 1, + [WSA881X_BOOST_MISC3_CTL] = 1, + [WSA881X_BOOST_ATEST_CTL] = 1, + [WSA881X_SPKR_PROT_FE_GAIN] = 1, + [WSA881X_SPKR_PROT_FE_CM_LDO_SET] = 1, + [WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET1] = 1, + [WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET2] = 1, + [WSA881X_SPKR_PROT_ATEST1] = 1, + [WSA881X_SPKR_PROT_ATEST2] = 1, + [WSA881X_SPKR_PROT_FE_VSENSE_VCM] = 1, + [WSA881X_SPKR_PROT_FE_VSENSE_BIAS_SET1] = 1, + [WSA881X_BONGO_RESRV_REG1] = 1, + [WSA881X_BONGO_RESRV_REG2] = 1, + [WSA881X_SPKR_PROT_SAR] = 1, + [WSA881X_SPKR_STATUS3] = 1, +}; + +static struct reg_default wsa881x_defaults[] = { + {WSA881X_CHIP_ID0, 0x00}, + {WSA881X_CHIP_ID1, 0x00}, + {WSA881X_CHIP_ID2, 0x00}, + {WSA881X_CHIP_ID3, 0x02}, + {WSA881X_BUS_ID, 0x00}, + {WSA881X_CDC_RST_CTL, 0x00}, + {WSA881X_CDC_TOP_CLK_CTL, 0x03}, + {WSA881X_CDC_ANA_CLK_CTL, 0x00}, + {WSA881X_CDC_DIG_CLK_CTL, 0x00}, + {WSA881X_CLOCK_CONFIG, 0x00}, + {WSA881X_ANA_CTL, 0x08}, + {WSA881X_SWR_RESET_EN, 0x00}, + {WSA881X_TEMP_DETECT_CTL, 0x01}, + {WSA881X_TEMP_MSB, 0x00}, + {WSA881X_TEMP_LSB, 0x00}, + {WSA881X_TEMP_CONFIG0, 0x00}, + {WSA881X_TEMP_CONFIG1, 0x00}, + {WSA881X_CDC_CLIP_CTL, 0x03}, + {WSA881X_SDM_PDM9_LSB, 0x00}, + {WSA881X_SDM_PDM9_MSB, 0x00}, + {WSA881X_CDC_RX_CTL, 0x7E}, + {WSA881X_DEM_BYPASS_DATA0, 0x00}, + {WSA881X_DEM_BYPASS_DATA1, 0x00}, + {WSA881X_DEM_BYPASS_DATA2, 0x00}, + {WSA881X_DEM_BYPASS_DATA3, 0x00}, + {WSA881X_OTP_CTRL0, 0x00}, + {WSA881X_OTP_CTRL1, 0x00}, + {WSA881X_HDRIVE_CTL_GROUP1, 0x00}, + {WSA881X_INTR_MODE, 0x00}, + {WSA881X_INTR_STATUS, 0x00}, + {WSA881X_INTR_CLEAR, 0x00}, + {WSA881X_INTR_LEVEL, 0x00}, + {WSA881X_INTR_SET, 0x00}, + {WSA881X_INTR_TEST, 0x00}, + {WSA881X_PDM_TEST_MODE, 0x00}, + {WSA881X_ATE_TEST_MODE, 0x00}, + {WSA881X_PIN_CTL_MODE, 0x00}, + {WSA881X_PIN_CTL_OE, 0x00}, + {WSA881X_PIN_WDATA_IOPAD, 0x00}, + {WSA881X_PIN_STATUS, 0x00}, + {WSA881X_DIG_DEBUG_MODE, 0x00}, + {WSA881X_DIG_DEBUG_SEL, 0x00}, + {WSA881X_DIG_DEBUG_EN, 0x00}, + {WSA881X_SWR_HM_TEST1, 0x08}, + {WSA881X_SWR_HM_TEST2, 0x00}, + {WSA881X_TEMP_DETECT_DBG_CTL, 0x00}, + {WSA881X_TEMP_DEBUG_MSB, 0x00}, + {WSA881X_TEMP_DEBUG_LSB, 0x00}, + {WSA881X_SAMPLE_EDGE_SEL, 0x0C}, + {WSA881X_SPARE_0, 0x00}, + {WSA881X_SPARE_1, 0x00}, + {WSA881X_SPARE_2, 0x00}, + {WSA881X_OTP_REG_0, 0x01}, + {WSA881X_OTP_REG_1, 0xFF}, + {WSA881X_OTP_REG_2, 0xC0}, + {WSA881X_OTP_REG_3, 0xFF}, + {WSA881X_OTP_REG_4, 0xC0}, + {WSA881X_OTP_REG_5, 0xFF}, + {WSA881X_OTP_REG_6, 0xFF}, + {WSA881X_OTP_REG_7, 0xFF}, + {WSA881X_OTP_REG_8, 0xFF}, + {WSA881X_OTP_REG_9, 0xFF}, + {WSA881X_OTP_REG_10, 0xFF}, + {WSA881X_OTP_REG_11, 0xFF}, + {WSA881X_OTP_REG_12, 0xFF}, + {WSA881X_OTP_REG_13, 0xFF}, + {WSA881X_OTP_REG_14, 0xFF}, + {WSA881X_OTP_REG_15, 0xFF}, + {WSA881X_OTP_REG_16, 0xFF}, + {WSA881X_OTP_REG_17, 0xFF}, + {WSA881X_OTP_REG_18, 0xFF}, + {WSA881X_OTP_REG_19, 0xFF}, + {WSA881X_OTP_REG_20, 0xFF}, + {WSA881X_OTP_REG_21, 0xFF}, + {WSA881X_OTP_REG_22, 0xFF}, + {WSA881X_OTP_REG_23, 0xFF}, + {WSA881X_OTP_REG_24, 0x03}, + {WSA881X_OTP_REG_25, 0x01}, + {WSA881X_OTP_REG_26, 0x03}, + {WSA881X_OTP_REG_27, 0x11}, + {WSA881X_OTP_REG_63, 0x40}, + /* WSA881x Analog registers */ + {WSA881X_BIAS_REF_CTRL, 0x6C}, + {WSA881X_BIAS_TEST, 0x16}, + {WSA881X_BIAS_BIAS, 0xF0}, + {WSA881X_TEMP_OP, 0x00}, + {WSA881X_TEMP_IREF_CTRL, 0x56}, + {WSA881X_TEMP_ISENS_CTRL, 0x47}, + {WSA881X_TEMP_CLK_CTRL, 0x87}, + {WSA881X_TEMP_TEST, 0x00}, + {WSA881X_TEMP_BIAS, 0x51}, + {WSA881X_TEMP_DOUT_MSB, 0x00}, + {WSA881X_TEMP_DOUT_LSB, 0x00}, + {WSA881X_ADC_EN_MODU_V, 0x00}, + {WSA881X_ADC_EN_MODU_I, 0x00}, + {WSA881X_ADC_EN_DET_TEST_V, 0x00}, + {WSA881X_ADC_EN_DET_TEST_I, 0x00}, + {WSA881X_ADC_EN_SEL_IBAIS, 0x10}, + {WSA881X_SPKR_DRV_EN, 0x74}, + {WSA881X_SPKR_DRV_DBG, 0x15}, + {WSA881X_SPKR_PWRSTG_DBG, 0x00}, + {WSA881X_SPKR_OCP_CTL, 0xD4}, + {WSA881X_SPKR_CLIP_CTL, 0x90}, + {WSA881X_SPKR_PA_INT, 0x54}, + {WSA881X_SPKR_BIAS_CAL, 0xAC}, + {WSA881X_SPKR_STATUS1, 0x00}, + {WSA881X_SPKR_STATUS2, 0x00}, + {WSA881X_BOOST_EN_CTL, 0x18}, + {WSA881X_BOOST_CURRENT_LIMIT, 0x7A}, + {WSA881X_BOOST_PRESET_OUT2, 0x70}, + {WSA881X_BOOST_FORCE_OUT, 0x0E}, + {WSA881X_BOOST_LDO_PROG, 0x16}, + {WSA881X_BOOST_SLOPE_COMP_ISENSE_FB, 0x71}, + {WSA881X_BOOST_RON_CTL, 0x0F}, + {WSA881X_BOOST_ZX_CTL, 0x34}, + {WSA881X_BOOST_START_CTL, 0x23}, + {WSA881X_BOOST_MISC1_CTL, 0x80}, + {WSA881X_BOOST_MISC2_CTL, 0x00}, + {WSA881X_BOOST_MISC3_CTL, 0x00}, + {WSA881X_BOOST_ATEST_CTL, 0x00}, + {WSA881X_SPKR_PROT_FE_GAIN, 0x46}, + {WSA881X_SPKR_PROT_FE_CM_LDO_SET, 0x3B}, + {WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET1, 0x8D}, + {WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET2, 0x8D}, + {WSA881X_SPKR_PROT_ATEST1, 0x01}, + {WSA881X_SPKR_PROT_FE_VSENSE_VCM, 0x8D}, + {WSA881X_SPKR_PROT_FE_VSENSE_BIAS_SET1, 0x4D}, + {WSA881X_SPKR_PROT_SAR, 0x00}, + {WSA881X_SPKR_STATUS3, 0x00}, +}; + +static const struct reg_sequence wsa881x_pre_pmu_pa[] = { + {WSA881X_SPKR_DRV_GAIN, 0x41, 0}, + {WSA881X_SPKR_MISC_CTL1, 0x01, 0}, + {WSA881X_ADC_EN_DET_TEST_I, 0x01, 0}, + {WSA881X_ADC_EN_MODU_V, 0x02, 0}, + {WSA881X_ADC_EN_DET_TEST_V, 0x10, 0}, + {WSA881X_SPKR_PWRSTG_DBG, 0xA0, 0}, +}; + +static const struct reg_sequence wsa881x_pre_pmu_pa_2_0[] = { + {WSA881X_SPKR_DRV_GAIN, 0x41, 0}, + {WSA881X_SPKR_MISC_CTL1, 0x87, 0}, +}; + +static const struct reg_sequence wsa881x_post_pmu_pa[] = { + {WSA881X_SPKR_PWRSTG_DBG, 0x00, 0}, + {WSA881X_ADC_EN_DET_TEST_V, 0x00, 0}, + {WSA881X_ADC_EN_MODU_V, 0x00, 0}, + {WSA881X_ADC_EN_DET_TEST_I, 0x00, 0}, +}; + +static const struct reg_sequence wsa881x_vi_txfe_en[] = { + {WSA881X_SPKR_PROT_FE_VSENSE_VCM, 0x85, 0}, + {WSA881X_SPKR_PROT_ATEST2, 0x0A, 0}, + {WSA881X_SPKR_PROT_FE_GAIN, 0xCF, 0}, +}; + +static const struct reg_sequence wsa881x_vi_txfe_en_2_0[] = { + {WSA881X_SPKR_PROT_FE_VSENSE_VCM, 0x85, 0}, + {WSA881X_SPKR_PROT_ATEST2, 0x0A, 0}, + {WSA881X_SPKR_PROT_FE_GAIN, 0x47, 0}, +}; + +/* Default register reset values for WSA881x rev 2.0 */ +static struct reg_sequence wsa881x_rev_2_0[] = { + {WSA881X_RESET_CTL, 0x00, 0x00}, + {WSA881X_TADC_VALUE_CTL, 0x01, 0x00}, + {WSA881X_INTR_MASK, 0x1B, 0x00}, + {WSA881X_IOPAD_CTL, 0x00, 0x00}, + {WSA881X_OTP_REG_28, 0x3F, 0x00}, + {WSA881X_OTP_REG_29, 0x3F, 0x00}, + {WSA881X_OTP_REG_30, 0x01, 0x00}, + {WSA881X_OTP_REG_31, 0x01, 0x00}, + {WSA881X_TEMP_ADC_CTRL, 0x03, 0x00}, + {WSA881X_ADC_SEL_IBIAS, 0x45, 0x00}, + {WSA881X_SPKR_DRV_GAIN, 0xC1, 0x00}, + {WSA881X_SPKR_DAC_CTL, 0x42, 0x00}, + {WSA881X_SPKR_BBM_CTL, 0x02, 0x00}, + {WSA881X_SPKR_MISC_CTL1, 0x40, 0x00}, + {WSA881X_SPKR_MISC_CTL2, 0x07, 0x00}, + {WSA881X_SPKR_BIAS_INT, 0x5F, 0x00}, + {WSA881X_SPKR_BIAS_PSRR, 0x44, 0x00}, + {WSA881X_BOOST_PS_CTL, 0xA0, 0x00}, + {WSA881X_BOOST_PRESET_OUT1, 0xB7, 0x00}, + {WSA881X_BOOST_LOOP_STABILITY, 0x8D, 0x00}, + {WSA881X_SPKR_PROT_ATEST2, 0x02, 0x00}, + {WSA881X_BONGO_RESRV_REG1, 0x5E, 0x00}, + {WSA881X_BONGO_RESRV_REG2, 0x07, 0x00}, +}; + +enum wsa_port_ids { + WSA881X_PORT_DAC, + WSA881X_PORT_COMP, + WSA881X_PORT_BOOST, + WSA881X_PORT_VISENSE, +}; + +/* 4 ports */ +static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = { + { + /* DAC */ + .num = 1, + .type = SDW_DPN_SIMPLE, + .min_ch = 1, + .max_ch = 8, + .simple_ch_prep_sm = true, + }, { + /* COMP */ + .num = 2, + .type = SDW_DPN_SIMPLE, + .min_ch = 1, + .max_ch = 8, + .simple_ch_prep_sm = true, + }, { + /* BOOST */ + .num = 3, + .type = SDW_DPN_SIMPLE, + .min_ch = 1, + .max_ch = 8, + .simple_ch_prep_sm = true, + }, { + /* VISENSE */ + .num = 4, + .type = SDW_DPN_SIMPLE, + .min_ch = 1, + .max_ch = 8, + .simple_ch_prep_sm = true, + } +}; + +static bool wsa881x_readable_register(struct device *dev, unsigned int reg) +{ + return wsa881x_reg_readable[reg]; +} + +static bool wsa881x_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case WSA881X_CHIP_ID0: + case WSA881X_CHIP_ID1: + case WSA881X_CHIP_ID2: + case WSA881X_CHIP_ID3: + case WSA881X_BUS_ID: + case WSA881X_TEMP_MSB: + case WSA881X_TEMP_LSB: + case WSA881X_SDM_PDM9_LSB: + case WSA881X_SDM_PDM9_MSB: + case WSA881X_OTP_CTRL1: + case WSA881X_INTR_STATUS: + case WSA881X_ATE_TEST_MODE: + case WSA881X_PIN_STATUS: + case WSA881X_SWR_HM_TEST2: + case WSA881X_SPKR_STATUS1: + case WSA881X_SPKR_STATUS2: + case WSA881X_SPKR_STATUS3: + case WSA881X_OTP_REG_0: + case WSA881X_OTP_REG_1: + case WSA881X_OTP_REG_2: + case WSA881X_OTP_REG_3: + case WSA881X_OTP_REG_4: + case WSA881X_OTP_REG_5: + case WSA881X_OTP_REG_31: + case WSA881X_TEMP_DOUT_MSB: + case WSA881X_TEMP_DOUT_LSB: + case WSA881X_TEMP_OP: + case WSA881X_SPKR_PROT_SAR: + return true; + default: + return false; + } +} + +static struct regmap_config wsa881x_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .reg_defaults = wsa881x_defaults, + .num_reg_defaults = ARRAY_SIZE(wsa881x_defaults), + .max_register = WSA881X_MAX_REGISTER, + .volatile_reg = wsa881x_volatile_register, + .readable_reg = wsa881x_readable_register, + .reg_format_endian = REGMAP_ENDIAN_NATIVE, + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .can_multi_write = true, +}; + +enum { + G_18DB = 0, + G_16P5DB, + G_15DB, + G_13P5DB, + G_12DB, + G_10P5DB, + G_9DB, + G_7P5DB, + G_6DB, + G_4P5DB, + G_3DB, + G_1P5DB, + G_0DB, +}; + +/* + * Private data Structure for wsa881x. All parameters related to + * WSA881X codec needs to be defined here. + */ +struct wsa881x_priv { + struct regmap *regmap; + struct device *dev; + struct sdw_slave *slave; + struct gpio_desc *sd_n; + int bg_cnt; + int clk_cnt; + int version; + /* bandgap lock */ + struct mutex bg_lock; + /* clk resource lock */ + struct mutex res_lock; + bool port_prepared[WSA881X_MAX_SWR_PORTS]; + u8 pa_gain; +}; + +static void wsa881x_init(struct snd_soc_component *comp) +{ + struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp); + + wsa881x->version = snd_soc_component_read32(comp, WSA881X_CHIP_ID1); + regcache_cache_only(wsa881x->regmap, true); + regmap_multi_reg_write(wsa881x->regmap, wsa881x_rev_2_0, + ARRAY_SIZE(wsa881x_rev_2_0)); + regcache_cache_only(wsa881x->regmap, false); + /* Enable software reset output from soundwire slave */ + snd_soc_component_update_bits(comp, WSA881X_SWR_RESET_EN, 0x07, 0x07); + /* Bring out of analog reset */ + snd_soc_component_update_bits(comp, WSA881X_CDC_RST_CTL, 0x02, 0x02); + /* Bring out of digital reset */ + snd_soc_component_update_bits(comp, WSA881X_CDC_RST_CTL, 0x01, 0x01); + + snd_soc_component_update_bits(comp, WSA881X_CLOCK_CONFIG, 0x10, 0x10); + snd_soc_component_update_bits(comp, WSA881X_SPKR_OCP_CTL, 0x02, 0x02); + snd_soc_component_update_bits(comp, WSA881X_SPKR_MISC_CTL1, 0xC0, 0x80); + snd_soc_component_update_bits(comp, WSA881X_SPKR_MISC_CTL1, 0x06, 0x06); + snd_soc_component_update_bits(comp, WSA881X_SPKR_BIAS_INT, 0xFF, 0x00); + snd_soc_component_update_bits(comp, WSA881X_SPKR_PA_INT, 0xF0, 0x40); + snd_soc_component_update_bits(comp, WSA881X_SPKR_PA_INT, 0x0E, 0x0E); + snd_soc_component_update_bits(comp, WSA881X_BOOST_LOOP_STABILITY, + 0x03, 0x03); + snd_soc_component_update_bits(comp, WSA881X_BOOST_MISC2_CTL, + 0xFF, 0x14); + snd_soc_component_update_bits(comp, WSA881X_BOOST_START_CTL, + 0x80, 0x80); + snd_soc_component_update_bits(comp, WSA881X_BOOST_START_CTL, + 0x03, 0x00); + snd_soc_component_update_bits(comp, WSA881X_BOOST_SLOPE_COMP_ISENSE_FB, + 0x0C, 0x04); + snd_soc_component_update_bits(comp, WSA881X_BOOST_SLOPE_COMP_ISENSE_FB, + 0x03, 0x00); + if (snd_soc_component_read32(comp, WSA881X_OTP_REG_0)) + snd_soc_component_update_bits(comp, WSA881X_BOOST_PRESET_OUT1, + 0xF0, 0x70); + snd_soc_component_update_bits(comp, WSA881X_BOOST_PRESET_OUT2, + 0xF0, 0x30); + snd_soc_component_update_bits(comp, WSA881X_SPKR_DRV_EN, 0x08, 0x08); + snd_soc_component_update_bits(comp, WSA881X_BOOST_CURRENT_LIMIT, + 0x0F, 0x08); + snd_soc_component_update_bits(comp, WSA881X_SPKR_OCP_CTL, 0x30, 0x30); + snd_soc_component_update_bits(comp, WSA881X_SPKR_OCP_CTL, 0x0C, 0x00); + snd_soc_component_update_bits(comp, WSA881X_OTP_REG_28, 0x3F, 0x3A); + snd_soc_component_update_bits(comp, WSA881X_BONGO_RESRV_REG1, + 0xFF, 0xB2); + snd_soc_component_update_bits(comp, WSA881X_BONGO_RESRV_REG2, + 0xFF, 0x05); +} + +static int wsa881x_component_probe(struct snd_soc_component *comp) +{ + struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp); + + if (!wsa881x) + return -EINVAL; + + snd_soc_component_init_regmap(comp, wsa881x->regmap); + + mutex_init(&wsa881x->bg_lock); + mutex_init(&wsa881x->res_lock); + wsa881x_init(comp); + wsa881x->bg_cnt = 0; + wsa881x->clk_cnt = 0; + + return 0; +} + +static int wsa881x_put_pa_gain(struct snd_kcontrol *kc, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kc); + struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kc->private_value; + int max = mc->max; + unsigned int mask = (1 << fls(max)) - 1; + + /* + * program actual register just before compander enable and ensure hw + * sequence is followed + */ + wsa881x->pa_gain = (max - ucontrol->value.integer.value[0]) & mask; + + return 0; +} + +static const char * const smart_boost_lvl_text[] = { + "6.625 V", "6.750 V", "6.875 V", "7.000 V", + "7.125 V", "7.250 V", "7.375 V", "7.500 V", + "7.625 V", "7.750 V", "7.875 V", "8.000 V", + "8.125 V", "8.250 V", "8.375 V", "8.500 V" +}; + +static const struct soc_enum smart_boost_lvl_enum = + SOC_ENUM_SINGLE(WSA881X_BOOST_PRESET_OUT1, 0, + ARRAY_SIZE(smart_boost_lvl_text), + smart_boost_lvl_text); + +static const DECLARE_TLV_DB_SCALE(pa_gain, 0, 150, 0); + +static const struct snd_kcontrol_new wsa881x_snd_controls[] = { + SOC_ENUM("Smart Boost Level", smart_boost_lvl_enum), + WSA881X_PA_GAIN_TLV("PA Gain", WSA881X_SPKR_DRV_GAIN, + 4, 0xC, 1, pa_gain), + SOC_SINGLE("PA Mute Switch", WSA881X_SPKR_DRV_EN, 7, 1, 1), +}; + +static const struct snd_soc_dapm_route wsa881x_audio_map[] = { + {"RDAC", NULL, "IN"}, + {"SPKR PGA", NULL, "RDAC"}, + {"SPKR", NULL, "SPKR PGA"}, +}; + +static void wsa881x_clk_ctrl(struct snd_soc_component *comp, bool enable) +{ + struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp); + + mutex_lock(&wsa881x->res_lock); + if (enable) { + ++wsa881x->clk_cnt; + if (wsa881x->clk_cnt == 1) { + snd_soc_component_write(comp, + WSA881X_CDC_DIG_CLK_CTL, + enable); + snd_soc_component_write(comp, + WSA881X_CDC_ANA_CLK_CTL, + enable); + } + } else { + --wsa881x->clk_cnt; + if (wsa881x->clk_cnt <= 0) { + WARN_ON(wsa881x->clk_cnt < 0); + wsa881x->clk_cnt = 0; + snd_soc_component_write(comp, + WSA881X_CDC_DIG_CLK_CTL, + enable); + snd_soc_component_write(comp, + WSA881X_CDC_ANA_CLK_CTL, + enable); + } + } + mutex_unlock(&wsa881x->res_lock); +} + +static void wsa881x_bandgap_ctrl(struct snd_soc_component *comp, bool enable) +{ + struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp); + + mutex_lock(&wsa881x->bg_lock); + if (enable) { + ++wsa881x->bg_cnt; + if (wsa881x->bg_cnt == 1) { + snd_soc_component_update_bits(comp, WSA881X_TEMP_OP, + 0x08, 0x08); + /* 400usec sleep is needed as per HW requirement */ + usleep_range(400, 410); + snd_soc_component_update_bits(comp, WSA881X_TEMP_OP, + 0x04, 0x04); + } + } else { + --wsa881x->bg_cnt; + if (wsa881x->bg_cnt <= 0) { + WARN_ON(wsa881x->bg_cnt < 0); + wsa881x->bg_cnt = 0; + snd_soc_component_update_bits(comp, WSA881X_TEMP_OP, + 0x04, 0x00); + snd_soc_component_update_bits(comp, WSA881X_TEMP_OP, + 0x08, 0x00); + } + } + mutex_unlock(&wsa881x->bg_lock); +} + +static int wsa881x_boost_ctrl(struct snd_soc_component *comp, bool enable) +{ + if (enable) + snd_soc_component_update_bits(comp, WSA881X_BOOST_EN_CTL, + 0x80, 0x80); + else + snd_soc_component_update_bits(comp, WSA881X_BOOST_EN_CTL, + 0x80, 0x00); + /* + * 1.5ms sleep is needed after boost enable/disable as per + * HW requirement + */ + usleep_range(1500, 1510); + return 0; +} + +static int32_t wsa881x_resource_acquire(struct snd_soc_component *comp, + bool enable) +{ + wsa881x_clk_ctrl(comp, enable); + wsa881x_bandgap_ctrl(comp, enable); + + return 0; +} + +static int wsa881x_rdac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + wsa881x_resource_acquire(comp, true); + wsa881x_boost_ctrl(comp, true); + break; + case SND_SOC_DAPM_POST_PMD: + wsa881x_boost_ctrl(comp, false); + wsa881x_resource_acquire(comp, false); + break; + } + return 0; +} + +static int wsa881x_ramp_pa_gain(struct snd_soc_component *comp, + int min_gain, int max_gain, int udelay) +{ + int val; + + for (val = min_gain; max_gain <= val; val--) { + snd_soc_component_update_bits(comp, WSA881X_SPKR_DRV_GAIN, + 0xF0, val << 4); + /* + * 1ms delay is needed for every step change in gain as per + * HW requirement. + */ + usleep_range(udelay, udelay + 10); + } + return 0; +} + +static int wsa881x_visense_txfe_ctrl(struct snd_soc_component *comp, + bool enable, u8 isense1_gain, + u8 isense2_gain, + u8 vsense_gain) +{ + struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp); + + if (enable) { + regmap_multi_reg_write(wsa881x->regmap, + wsa881x_vi_txfe_en_2_0, + ARRAY_SIZE(wsa881x_vi_txfe_en_2_0)); + } else { + snd_soc_component_update_bits(comp, + WSA881X_SPKR_PROT_FE_VSENSE_VCM, + 0x08, 0x08); + /* + * 200us sleep is needed after visense txfe disable as per + * HW requirement. + */ + usleep_range(200, 210); + snd_soc_component_update_bits(comp, WSA881X_SPKR_PROT_FE_GAIN, + 0x01, 0x00); + } + return 0; +} + +static int wsa881x_visense_adc_ctrl(struct snd_soc_component *comp, + bool enable) +{ + snd_soc_component_update_bits(comp, WSA881X_ADC_EN_MODU_V, (0x01 << 7), + (enable << 7)); + snd_soc_component_update_bits(comp, WSA881X_ADC_EN_MODU_I, (0x01 << 7), + (enable << 7)); + return 0; +} + +static int wsa881x_spkr_pa_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm); + struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp); + int min_gain, max_gain; + + dev_err(comp->dev, "%s: %s %d\n", __func__, w->name, event); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_component_update_bits(comp, WSA881X_SPKR_OCP_CTL, + 0xC0, 0x80); + regmap_multi_reg_write(wsa881x->regmap, + wsa881x_pre_pmu_pa_2_0, + ARRAY_SIZE(wsa881x_pre_pmu_pa_2_0)); + + /* Set register mode if compander is not enabled */ + if (!wsa881x->port_prepared[WSA881X_PORT_COMP]) + snd_soc_component_update_bits(comp, + WSA881X_SPKR_DRV_GAIN, + 0x08, 0x08); + else + snd_soc_component_update_bits(comp, + WSA881X_SPKR_DRV_GAIN, + 0x08, 0x00); + break; + case SND_SOC_DAPM_POST_PMU: + if (!wsa881x->port_prepared[WSA881X_PORT_COMP]) { + max_gain = wsa881x->pa_gain; + /* + * Gain has to set incrementally in 4 steps + * as per HW sequence + */ + if (max_gain > G_4P5DB) + min_gain = G_0DB; + else + min_gain = max_gain + 3; + /* + * 1ms delay is needed before change in gain + * as per HW requirement. + */ + usleep_range(1000, 1010); + wsa881x_ramp_pa_gain(comp, min_gain, max_gain, 1000); + } + + if (wsa881x->port_prepared[WSA881X_PORT_VISENSE]) { + wsa881x_visense_txfe_ctrl(comp, true, + 0x00, 0x03, 0x01); + snd_soc_component_update_bits(comp, + WSA881X_ADC_EN_SEL_IBAIS, + 0x07, 0x01); + wsa881x_visense_adc_ctrl(comp, true); + } + + break; + case SND_SOC_DAPM_POST_PMD: + if (wsa881x->port_prepared[WSA881X_PORT_VISENSE]) { + wsa881x_visense_adc_ctrl(comp, false); + wsa881x_visense_txfe_ctrl(comp, false, + 0x00, 0x01, 0x01); + } + + snd_soc_component_update_bits(comp, WSA881X_SPKR_OCP_CTL, + 0xC0, 0xC0); + break; + } + return 0; +} + +static const struct snd_soc_dapm_widget wsa881x_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("IN"), + SND_SOC_DAPM_DAC_E("RDAC", NULL, WSA881X_SPKR_DAC_CTL, 7, 0, + wsa881x_rdac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PGA_E("SPKR PGA", WSA881X_SPKR_DRV_EN, 7, 0, NULL, 0, + wsa881x_spkr_pa_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_OUTPUT("SPKR"), +}; + +static void wsa881x_component_remove(struct snd_soc_component *comp) +{ + struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp); + + mutex_destroy(&wsa881x->bg_lock); + mutex_destroy(&wsa881x->res_lock); +} + +static const struct snd_soc_component_driver wsa881x_component_drv = { + .probe = wsa881x_component_probe, + .controls = wsa881x_snd_controls, + .num_controls = ARRAY_SIZE(wsa881x_snd_controls), + .remove = wsa881x_component_remove, + .dapm_widgets = wsa881x_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(wsa881x_dapm_widgets), + .dapm_routes = wsa881x_audio_map, + .num_dapm_routes = ARRAY_SIZE(wsa881x_audio_map), +}; + +static int wsa881x_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct wsa881x_priv *wsa881x = dev_get_drvdata(&slave->dev); + + if (status == SDW_SLAVE_ATTACHED) { + if (!wsa881x->regmap) { + wsa881x->regmap = devm_regmap_init_sdw(slave, + &wsa881x_regmap_config); + if (IS_ERR(wsa881x->regmap)) { + dev_err(&slave->dev, "regmap_init failed\n"); + return PTR_ERR(wsa881x->regmap); + } + } + + return snd_soc_register_component(&slave->dev, + &wsa881x_component_drv, + NULL, 0); + } else if (status == SDW_SLAVE_UNATTACHED) { + snd_soc_unregister_component(&slave->dev); + } + + return 0; +} + +static int wsa881x_port_prep(struct sdw_slave *slave, + struct sdw_prepare_ch *prepare_ch, + enum sdw_port_prep_ops state) +{ + struct wsa881x_priv *wsa881x = dev_get_drvdata(&slave->dev); + + if (state == SDW_OPS_PORT_POST_PREP) + wsa881x->port_prepared[prepare_ch->num - 1] = true; + else + wsa881x->port_prepared[prepare_ch->num - 1] = false; + + return 0; +} + +static int wsa881x_bus_config(struct sdw_slave *slave, + struct sdw_bus_params *params) +{ + sdw_write(slave, SWRS_SCP_HOST_CLK_DIV2_CTL_BANK(params->next_bank), + 0x01); + + return 0; +} + +static struct sdw_slave_ops wsa881x_slave_ops = { + .update_status = wsa881x_update_status, + .bus_config = wsa881x_bus_config, + .port_prep = wsa881x_port_prep, +}; + +static int wsa881x_probe(struct sdw_slave *pdev, + const struct sdw_device_id *id) +{ + struct wsa881x_priv *wsa881x; + + wsa881x = devm_kzalloc(&pdev->dev, sizeof(*wsa881x), GFP_KERNEL); + if (!wsa881x) + return -ENOMEM; + + wsa881x->sd_n = devm_gpiod_get_optional(&pdev->dev, "pd", + GPIOD_FLAGS_BIT_NONEXCLUSIVE); + if (IS_ERR(wsa881x->sd_n)) { + dev_err(&pdev->dev, "Shutdown Control GPIO not found\n"); + return PTR_ERR(wsa881x->sd_n); + } + + dev_set_drvdata(&pdev->dev, wsa881x); + wsa881x->slave = pdev; + wsa881x->dev = &pdev->dev; + pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0); + pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop; + gpiod_set_value(wsa881x->sd_n, 1); + + return 0; +} + +static int wsa881x_remove(struct sdw_slave *sdw) +{ + return 0; +} + +static const struct sdw_device_id wsa881x_slave_id[] = { + SDW_SLAVE_ENTRY(0x0217, 0x2010, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, wsa881x_slave_id); + +static struct sdw_driver wsa881x_codec_driver = { + .probe = wsa881x_probe, + .remove = wsa881x_remove, + .ops = &wsa881x_slave_ops, + .id_table = wsa881x_slave_id, + .driver = { + .name = "wsa881x-codec", + } +}; +module_sdw_driver(wsa881x_codec_driver); + +MODULE_DESCRIPTION("WSA881x codec driver"); +MODULE_LICENSE("GPL v2");
+/* 4 ports */ +static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = {
- {
/* DAC */.num = 1,.type = SDW_DPN_SIMPLE,
IIRC we added the REDUCED type in SoundWire 1.1 to cover the PDM case with channel packing (or was it grouping) used by Qualcomm. I am not sure the SIMPLE type works?
.min_ch = 1,.max_ch = 8,.simple_ch_prep_sm = true,- }, {
/* COMP */.num = 2,.type = SDW_DPN_SIMPLE,.min_ch = 1,.max_ch = 8,.simple_ch_prep_sm = true,- }, {
/* BOOST */.num = 3,.type = SDW_DPN_SIMPLE,.min_ch = 1,.max_ch = 8,.simple_ch_prep_sm = true,- }, {
/* VISENSE */.num = 4,.type = SDW_DPN_SIMPLE,.min_ch = 1,.max_ch = 8,.simple_ch_prep_sm = true,- }
+};
+static int wsa881x_update_status(struct sdw_slave *slave,
enum sdw_slave_status status)+{
- struct wsa881x_priv *wsa881x = dev_get_drvdata(&slave->dev);
- if (status == SDW_SLAVE_ATTACHED) {
there is an ambiguity here, the Slave can be attached but as device0 (not enumerated). We should check dev_num > 0
if (!wsa881x->regmap) {wsa881x->regmap = devm_regmap_init_sdw(slave,&wsa881x_regmap_config);if (IS_ERR(wsa881x->regmap)) {dev_err(&slave->dev, "regmap_init failed\n");return PTR_ERR(wsa881x->regmap);}}return snd_soc_register_component(&slave->dev,&wsa881x_component_drv,NULL, 0);- } else if (status == SDW_SLAVE_UNATTACHED) {
snd_soc_unregister_component(&slave->dev);
the update_status() is supposed to be called based on bus events, it'd be very odd to register/unregister the component itself dynamically. In our existing Realtek-based solutions the register_component() is called in the probe function (and unregister_component() in remove). We do the inits when the Slave becomes attached but the component is already registered.
- }
- return 0;
+}
+static int wsa881x_port_prep(struct sdw_slave *slave,
struct sdw_prepare_ch *prepare_ch,enum sdw_port_prep_ops state)+{
- struct wsa881x_priv *wsa881x = dev_get_drvdata(&slave->dev);
- if (state == SDW_OPS_PORT_POST_PREP)
wsa881x->port_prepared[prepare_ch->num - 1] = true;- else
wsa881x->port_prepared[prepare_ch->num - 1] = false;- return 0;
+}
+static int wsa881x_bus_config(struct sdw_slave *slave,
struct sdw_bus_params *params)+{
- sdw_write(slave, SWRS_SCP_HOST_CLK_DIV2_CTL_BANK(params->next_bank),
0x01);- return 0;
+}
+static struct sdw_slave_ops wsa881x_slave_ops = {
- .update_status = wsa881x_update_status,
- .bus_config = wsa881x_bus_config,
- .port_prep = wsa881x_port_prep,
+};
+static int wsa881x_probe(struct sdw_slave *pdev,
const struct sdw_device_id *id)+{
- struct wsa881x_priv *wsa881x;
- wsa881x = devm_kzalloc(&pdev->dev, sizeof(*wsa881x), GFP_KERNEL);
- if (!wsa881x)
return -ENOMEM;- wsa881x->sd_n = devm_gpiod_get_optional(&pdev->dev, "pd",
GPIOD_FLAGS_BIT_NONEXCLUSIVE);- if (IS_ERR(wsa881x->sd_n)) {
dev_err(&pdev->dev, "Shutdown Control GPIO not found\n");return PTR_ERR(wsa881x->sd_n);- }
- dev_set_drvdata(&pdev->dev, wsa881x);
- wsa881x->slave = pdev;
- wsa881x->dev = &pdev->dev;
- pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0);
- pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
- gpiod_set_value(wsa881x->sd_n, 1);
- return 0;
+}
+static int wsa881x_remove(struct sdw_slave *sdw) +{
- return 0;
+}
+static const struct sdw_device_id wsa881x_slave_id[] = {
- SDW_SLAVE_ENTRY(0x0217, 0x2010, 0),
- {},
+}; +MODULE_DEVICE_TABLE(sdw, wsa881x_slave_id);
+static struct sdw_driver wsa881x_codec_driver = {
- .probe = wsa881x_probe,
- .remove = wsa881x_remove,
is this needed since you do nothing in that function?
- .ops = &wsa881x_slave_ops,
- .id_table = wsa881x_slave_id,
- .driver = {
.name = "wsa881x-codec",- }
+}; +module_sdw_driver(wsa881x_codec_driver);
+MODULE_DESCRIPTION("WSA881x codec driver"); +MODULE_LICENSE("GPL v2");
Thanks for taking time to review,
On 08/08/2019 16:18, Pierre-Louis Bossart wrote:
+/* 4 ports */ +static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = { + { + /* DAC */ + .num = 1, + .type = SDW_DPN_SIMPLE,
IIRC we added the REDUCED type in SoundWire 1.1 to cover the PDM case with channel packing (or was it grouping) used by Qualcomm. I am not sure the SIMPLE type works?
grouping I guess.
This is a simplified data port as there is no DPn_OffsetCtrl2 register implemented.
Having said below channel count looks incorrect, i should fix that.
+ .min_ch = 1, + .max_ch = 8, + .simple_ch_prep_sm = true, + }, { + /* COMP */ + .num = 2, + .type = SDW_DPN_SIMPLE, + .min_ch = 1, + .max_ch = 8, + .simple_ch_prep_sm = true, + }, { + /* BOOST */ + .num = 3, + .type = SDW_DPN_SIMPLE, + .min_ch = 1, + .max_ch = 8, + .simple_ch_prep_sm = true, + }, { + /* VISENSE */ + .num = 4, + .type = SDW_DPN_SIMPLE, + .min_ch = 1, + .max_ch = 8, + .simple_ch_prep_sm = true, + } +};
+static int wsa881x_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct wsa881x_priv *wsa881x = dev_get_drvdata(&slave->dev);
+ if (status == SDW_SLAVE_ATTACHED) {
there is an ambiguity here, the Slave can be attached but as device0 (not enumerated). We should check dev_num > 0
Thanks for point that! will add a check!
+ if (!wsa881x->regmap) { + wsa881x->regmap = devm_regmap_init_sdw(slave, + &wsa881x_regmap_config); + if (IS_ERR(wsa881x->regmap)) { + dev_err(&slave->dev, "regmap_init failed\n"); + return PTR_ERR(wsa881x->regmap); + } + }
+ return snd_soc_register_component(&slave->dev, + &wsa881x_component_drv, + NULL, 0); + } else if (status == SDW_SLAVE_UNATTACHED) { + snd_soc_unregister_component(&slave->dev);
the update_status() is supposed to be called based on bus events, it'd be very odd to register/unregister the component itself dynamically. In our existing Realtek-based solutions the register_component() is called in the probe function (and unregister_component() in remove). We do the inits when the Slave becomes attached but the component is already registered.
looks less intrusive! I will give that a try!
+ }
+ return 0; +}
+static int wsa881x_remove(struct sdw_slave *sdw) +{ + return 0; +}
+static const struct sdw_device_id wsa881x_slave_id[] = { + SDW_SLAVE_ENTRY(0x0217, 0x2010, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, wsa881x_slave_id);
+static struct sdw_driver wsa881x_codec_driver = { + .probe = wsa881x_probe, + .remove = wsa881x_remove,
is this needed since you do nothing in that function?
yes, it can be removed! will do that in next version.
--srini
+/* 4 ports */ +static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = { + { + /* DAC */ + .num = 1, + .type = SDW_DPN_SIMPLE,
IIRC we added the REDUCED type in SoundWire 1.1 to cover the PDM case with channel packing (or was it grouping) used by Qualcomm. I am not sure the SIMPLE type works?
grouping I guess.
This is a simplified data port as there is no DPn_OffsetCtrl2 register implemented.
ok, for the REDUCED type it's required to have BlockPackingMode and OffsetCtrl2, so it does not apply here. Thanks for confirming.
On 08-08-19, 15:45, Srinivas Kandagatla wrote:
This patchset adds support to WSA8810/WSA8815 Class-D Smart Speaker Amplifier which is SoundWire interfaced. This also adds support to some missing bits in SoundWire bus layer like Device Tree support and module_sdw_driver macro.
^^^^^^^^^^^^^^^ That part we already applied :D
This patchset along with DB845c machine driver and WCD934x codec driver has been tested on SDM845 SoC based DragonBoard DB845c with two WSA8810 speakers.
Most of the code in this driver is rework of Qualcomm downstream drivers used in Andriod. Credits to Banajit Goswami and Patrick Lai's Team.
TODO: Add thermal sensor support in WSA881x.
This patchset also depends on the soundwire Kconfig patch https://lkml.org/lkml/2019/7/18/834 from Pierre
Thanks, srini
Changes since v1 RFC:
- bindings document renamed to slave.txt
- fix error code from dt slave parsing
Srinivas Kandagatla (4): dt-bindings: soundwire: add slave bindings soundwire: core: add device tree support for slave devices dt-bindings: ASoC: Add WSA881x bindings ASoC: codecs: add wsa881x amplifier support
.../bindings/sound/qcom,wsa881x.txt | 27 + .../devicetree/bindings/soundwire/slave.txt | 46 + drivers/soundwire/bus.c | 2 + drivers/soundwire/bus.h | 1 + drivers/soundwire/slave.c | 47 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wsa881x.c | 1160 +++++++++++++++++ 8 files changed, 1295 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.txt create mode 100644 Documentation/devicetree/bindings/soundwire/slave.txt create mode 100644 sound/soc/codecs/wsa881x.c
-- 2.21.0
participants (4)
-
Mark Brown -
Pierre-Louis Bossart -
Srinivas Kandagatla -
Vinod Koul