[alsa-devel] [PATCH] ASoC: cs4271: claim reset GPIO in bus probe function
Move the GPIO acquisition from the codec to the bus probe functions.
Signed-off-by: Daniel Mack zonque@gmail.com --- sound/soc/codecs/cs4271.c | 60 +++++++++++++++++++++++++++++++---------------- 1 file changed, 40 insertions(+), 20 deletions(-)
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index ce05fd9..6bfe021 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -540,14 +540,10 @@ static int cs4271_probe(struct snd_soc_codec *codec) struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec); struct cs4271_platform_data *cs4271plat = codec->dev->platform_data; int ret; - int gpio_nreset = -EINVAL; bool amutec_eq_bmutec = false;
#ifdef CONFIG_OF if (of_match_device(cs4271_dt_ids, codec->dev)) { - gpio_nreset = of_get_named_gpio(codec->dev->of_node, - "reset-gpio", 0); - if (of_get_property(codec->dev->of_node, "cirrus,amutec-eq-bmutec", NULL)) amutec_eq_bmutec = true; @@ -559,27 +555,19 @@ static int cs4271_probe(struct snd_soc_codec *codec) #endif
if (cs4271plat) { - if (gpio_is_valid(cs4271plat->gpio_nreset)) - gpio_nreset = cs4271plat->gpio_nreset; - amutec_eq_bmutec = cs4271plat->amutec_eq_bmutec; cs4271->enable_soft_reset = cs4271plat->enable_soft_reset; }
- if (gpio_nreset >= 0) - if (devm_gpio_request(codec->dev, gpio_nreset, "CS4271 Reset")) - gpio_nreset = -EINVAL; - if (gpio_nreset >= 0) { + if (gpio_is_valid(cs4271->gpio_nreset)) { /* Reset codec */ - gpio_direction_output(gpio_nreset, 0); + gpio_direction_output(cs4271->gpio_nreset, 0); udelay(1); - gpio_set_value(gpio_nreset, 1); + gpio_set_value(cs4271->gpio_nreset, 1); /* Give the codec time to wake up */ udelay(1); }
- cs4271->gpio_nreset = gpio_nreset; - ret = regmap_update_bits(cs4271->regmap, CS4271_MODE2, CS4271_MODE2_PDN | CS4271_MODE2_CPEN, CS4271_MODE2_PDN | CS4271_MODE2_CPEN); @@ -641,14 +629,45 @@ static const struct regmap_config cs4271_spi_regmap = { .volatile_reg = cs4271_volatile_reg, };
-static int cs4271_spi_probe(struct spi_device *spi) +static int cs4271_common_probe(struct device *dev, + struct cs4271_private **c) { + struct cs4271_platform_data *cs4271plat = dev->platform_data; struct cs4271_private *cs4271;
- cs4271 = devm_kzalloc(&spi->dev, sizeof(*cs4271), GFP_KERNEL); + cs4271 = devm_kzalloc(dev, sizeof(*cs4271), GFP_KERNEL); if (!cs4271) return -ENOMEM;
+ if (of_match_device(cs4271_dt_ids, dev)) + cs4271->gpio_nreset = + of_get_named_gpio(dev->of_node, "reset-gpio", 0); + + if (cs4271plat) + cs4271->gpio_nreset = cs4271plat->gpio_nreset; + + if (gpio_is_valid(cs4271->gpio_nreset)) { + int ret; + + ret = devm_gpio_request(dev, cs4271->gpio_nreset, + "CS4271 Reset"); + if (ret < 0) + return ret; + } + + *c = cs4271; + return 0; +} + +static int cs4271_spi_probe(struct spi_device *spi) +{ + struct cs4271_private *cs4271; + int ret; + + ret = cs4271_common_probe(&spi->dev, &cs4271); + if (ret < 0) + return ret; + spi_set_drvdata(spi, cs4271); cs4271->regmap = devm_regmap_init_spi(spi, &cs4271_spi_regmap); if (IS_ERR(cs4271->regmap)) @@ -698,10 +717,11 @@ static int cs4271_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct cs4271_private *cs4271; + int ret;
- cs4271 = devm_kzalloc(&client->dev, sizeof(*cs4271), GFP_KERNEL); - if (!cs4271) - return -ENOMEM; + ret = cs4271_common_probe(&client->dev, &cs4271); + if (ret < 0) + return ret;
i2c_set_clientdata(client, cs4271); cs4271->regmap = devm_regmap_init_i2c(client, &cs4271_i2c_regmap);
On Feb 19, 2014, at 7:06, "Daniel Mack" zonque@gmail.com wrote:
Move the GPIO acquisition from the codec to the bus probe functions.
Signed-off-by: Daniel Mack zonque@gmail.com
sound/soc/codecs/cs4271.c | 60 +++++++++++++++++++++++++++++++---------------- 1 file changed, 40 insertions(+), 20 deletions(-)
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index ce05fd9..6bfe021 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -540,14 +540,10 @@ static int cs4271_probe(struct snd_soc_codec *codec) struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec); struct cs4271_platform_data *cs4271plat = codec->dev->platform_data; int ret;
- int gpio_nreset = -EINVAL; bool amutec_eq_bmutec = false;
#ifdef CONFIG_OF if (of_match_device(cs4271_dt_ids, codec->dev)) {
gpio_nreset = of_get_named_gpio(codec->dev->of_node,
"reset-gpio", 0);
if (of_get_property(codec->dev->of_node, "cirrus,amutec-eq-bmutec", NULL)) amutec_eq_bmutec = true;
@@ -559,27 +555,19 @@ static int cs4271_probe(struct snd_soc_codec *codec) #endif
if (cs4271plat) {
if (gpio_is_valid(cs4271plat->gpio_nreset))
gpio_nreset = cs4271plat->gpio_nreset;
amutec_eq_bmutec = cs4271plat->amutec_eq_bmutec; cs4271->enable_soft_reset = cs4271plat->enable_soft_reset;
}
if (gpio_nreset >= 0)
if (devm_gpio_request(codec->dev, gpio_nreset, "CS4271 Reset"))
gpio_nreset = -EINVAL;
if (gpio_nreset >= 0) {
- if (gpio_is_valid(cs4271->gpio_nreset)) { /* Reset codec */
gpio_direction_output(gpio_nreset, 0);
gpio_direction_output(cs4271->gpio_nreset, 0); udelay(1);
gpio_set_value(gpio_nreset, 1);
}gpio_set_value(cs4271->gpio_nreset, 1); /* Give the codec time to wake up */ udelay(1);
Since your moving all the GPIO reset code into a new function that's called from the bus probes why not put the reset in there as well?
- cs4271->gpio_nreset = gpio_nreset;
- ret = regmap_update_bits(cs4271->regmap, CS4271_MODE2, CS4271_MODE2_PDN | CS4271_MODE2_CPEN, CS4271_MODE2_PDN | CS4271_MODE2_CPEN);
@@ -641,14 +629,45 @@ static const struct regmap_config cs4271_spi_regmap = { .volatile_reg = cs4271_volatile_reg, };
-static int cs4271_spi_probe(struct spi_device *spi) +static int cs4271_common_probe(struct device *dev,
struct cs4271_private **c)
{
- struct cs4271_platform_data *cs4271plat = dev->platform_data; struct cs4271_private *cs4271;
- cs4271 = devm_kzalloc(&spi->dev, sizeof(*cs4271), GFP_KERNEL);
cs4271 = devm_kzalloc(dev, sizeof(*cs4271), GFP_KERNEL); if (!cs4271) return -ENOMEM;
if (of_match_device(cs4271_dt_ids, dev))
cs4271->gpio_nreset =
of_get_named_gpio(dev->of_node, "reset-gpio", 0);
if (cs4271plat)
cs4271->gpio_nreset = cs4271plat->gpio_nreset;
if (gpio_is_valid(cs4271->gpio_nreset)) {
int ret;
ret = devm_gpio_request(dev, cs4271->gpio_nreset,
"CS4271 Reset");
if (ret < 0)
return ret;
}
*c = cs4271;
return 0;
+}
+static int cs4271_spi_probe(struct spi_device *spi) +{
- struct cs4271_private *cs4271;
- int ret;
- ret = cs4271_common_probe(&spi->dev, &cs4271);
- if (ret < 0)
return ret;
- spi_set_drvdata(spi, cs4271); cs4271->regmap = devm_regmap_init_spi(spi, &cs4271_spi_regmap); if (IS_ERR(cs4271->regmap))
@@ -698,10 +717,11 @@ static int cs4271_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct cs4271_private *cs4271;
- int ret;
- cs4271 = devm_kzalloc(&client->dev, sizeof(*cs4271), GFP_KERNEL);
- if (!cs4271)
return -ENOMEM;
ret = cs4271_common_probe(&client->dev, &cs4271);
if (ret < 0)
return ret;
i2c_set_clientdata(client, cs4271); cs4271->regmap = devm_regmap_init_i2c(client, &cs4271_i2c_regmap);
-- 1.8.5.3
On 02/19/2014 05:08 PM, Austin, Brian wrote:
On Feb 19, 2014, at 7:06, "Daniel Mack" zonque@gmail.com wrote:
- if (gpio_nreset >= 0)
if (devm_gpio_request(codec->dev, gpio_nreset, "CS4271 Reset"))
gpio_nreset = -EINVAL;
- if (gpio_nreset >= 0) {
- if (gpio_is_valid(cs4271->gpio_nreset)) { /* Reset codec */
gpio_direction_output(gpio_nreset, 0);
gpio_direction_output(cs4271->gpio_nreset, 0); udelay(1);
gpio_set_value(gpio_nreset, 1);
}gpio_set_value(cs4271->gpio_nreset, 1); /* Give the codec time to wake up */ udelay(1);
Since your moving all the GPIO reset code into a new function that's called from the bus probes why not put the reset in there as well?
Because I want the codec to stay in reset until it is actually used, and the machine drivers builds the DAI link.
Daniel
On Feb 19, 2014, at 10:17, "Daniel Mack" daniel@zonque.org wrote:
On 02/19/2014 05:08 PM, Austin, Brian wrote:
On Feb 19, 2014, at 7:06, "Daniel Mack" zonque@gmail.com wrote:
- if (gpio_nreset >= 0)
if (devm_gpio_request(codec->dev, gpio_nreset, "CS4271 Reset"))
gpio_nreset = -EINVAL;
- if (gpio_nreset >= 0) {
- if (gpio_is_valid(cs4271->gpio_nreset)) { /* Reset codec */
gpio_direction_output(gpio_nreset, 0);
gpio_direction_output(cs4271->gpio_nreset, 0); udelay(1);
gpio_set_value(gpio_nreset, 1);
}gpio_set_value(cs4271->gpio_nreset, 1); /* Give the codec time to wake up */ udelay(1);
Since your moving all the GPIO reset code into a new function that's called from the bus probes why not put the reset in there as well?
Because I want the codec to stay in reset until it is actually used, and the machine drivers builds the DAI link.
Daniel
Ok, fair enough Thanks
On Feb 19, 2014, at 7:06, "Daniel Mack" zonque@gmail.com wrote:
Move the GPIO acquisition from the codec to the bus probe functions.
Signed-off-by: Daniel Mack zonque@gmail.com
Acked-by: Brian Austin brian.austin@cirrus.com
participants (4)
-
Austin, Brian
-
Daniel Mack
-
Daniel Mack
-
Mark Brown