[alsa-devel] [PATCH v2 3/3] dt/bindings: Add milivolt, milliamps, and nanohenry units
From: Paul Handrigan Paul.Handrigan@cirrus.com
Add millivolt, milliamp, and nanohenry units to the Electricity category.
Signed-off-by: Paul Handrigan Paul.Handrigan@cirrus.com --- Documentation/devicetree/bindings/property-units.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt index 12278d7..92d6793 100644 --- a/Documentation/devicetree/bindings/property-units.txt +++ b/Documentation/devicetree/bindings/property-units.txt @@ -25,9 +25,12 @@ Distance Electricity ---------------------------------------- -microamp : micro amps +-milliamp : milli amps -ohms : Ohms -micro-ohms : micro Ohms -microvolt : micro volts +-millivolt : micro volts +-nanohenry : nano henries
Temperature ----------------------------------------
On Wed, Oct 12, 2016 at 01:53:30PM -0500, Paul.Handrigan@cirrus.com wrote:
From: Paul Handrigan Paul.Handrigan@cirrus.com
Add millivolt, milliamp, and nanohenry units to the Electricity category.
Signed-off-by: Paul Handrigan Paul.Handrigan@cirrus.com
Documentation/devicetree/bindings/property-units.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt index 12278d7..92d6793 100644 --- a/Documentation/devicetree/bindings/property-units.txt +++ b/Documentation/devicetree/bindings/property-units.txt @@ -25,9 +25,12 @@ Distance Electricity
-microamp : micro amps +-milliamp : milli amps -ohms : Ohms -micro-ohms : micro Ohms -microvolt : micro volts +-millivolt : micro volts
Typo here ^^^^^
Thanks, Charles
On Wed, Oct 12, 2016 at 1:53 PM, Paul.Handrigan@cirrus.com wrote:
From: Paul Handrigan Paul.Handrigan@cirrus.com
Add millivolt, milliamp, and nanohenry units to the Electricity category.
Signed-off-by: Paul Handrigan Paul.Handrigan@cirrus.com
Documentation/devicetree/bindings/property-units.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt index 12278d7..92d6793 100644 --- a/Documentation/devicetree/bindings/property-units.txt +++ b/Documentation/devicetree/bindings/property-units.txt @@ -25,9 +25,12 @@ Distance Electricity
-microamp : micro amps +-milliamp : milli amps
Please explain why you need need this. Is 2^32 uA not enough range for you? While we do have multiple units for some, that's because people picked arbitrary units for their properties before this doc existed. Ideally, we only have 1 unit to prevent that problem.
-ohms : Ohms -micro-ohms : micro Ohms -microvolt : micro volts +-millivolt : micro volts
Same question.
+-nanohenry : nano henries
Temperature
-- 1.9.1
Electricity
-microamp : micro amps +-milliamp : milli amps
Please explain why you need need this. Is 2^32 uA not enough range for you? While we do have multiple units for some, that's because people picked arbitrary units for their properties before this doc existed. Ideally, we only have 1 unit to prevent that problem.
2^32 would be enough, however, microamps would not be a good representation for this particular entry. For example, if the current limit is 2.1A the entry will have to be 2100000. Micro amps will not be the best representation for this value from a scientific notation perspective. Since the scale is in miiliamps as it is defined in the data sheet of this device, it will be best to stay consistent since an error in conversion could cause serious problems.
Also, I really don¹t see why adding milliamps and millivolts as being a major problems since both of them are commonly used.
On Tue, Oct 18, 2016 at 12:43:48AM +0000, Handrigan, Paul wrote:
Electricity
-microamp : micro amps +-milliamp : milli amps
Please explain why you need need this. Is 2^32 uA not enough range for you? While we do have multiple units for some, that's because people picked arbitrary units for their properties before this doc existed. Ideally, we only have 1 unit to prevent that problem.
2^32 would be enough, however, microamps would not be a good representation for this particular entry. For example, if the current limit is 2.1A the entry will have to be 2100000. Micro amps will not be the best representation for this value from a scientific notation perspective. Since the scale is in miiliamps as it is defined in the data sheet of this device, it will be best to stay consistent since an error in conversion could cause serious problems.
Also, I really don¹t see why adding milliamps and millivolts as being a major problems since both of them are commonly used.
As I explained, we want to have some uniformity in properties especially across different bindings. That's not something I want to check in every review. Telling people to add units is enough.
I don't see how adding '000' is a problem.
Rob
On Tue, 18 Oct 2016, Rob Herring wrote:
On Tue, Oct 18, 2016 at 12:43:48AM +0000, Handrigan, Paul wrote:
Electricity
-microamp : micro amps +-milliamp : milli amps
Please explain why you need need this. Is 2^32 uA not enough range for you? While we do have multiple units for some, that's because people picked arbitrary units for their properties before this doc existed. Ideally, we only have 1 unit to prevent that problem.
2^32 would be enough, however, microamps would not be a good representation for this particular entry. For example, if the current limit is 2.1A the entry will have to be 2100000. Micro amps will not be the best representation for this value from a scientific notation perspective. Since the scale is in miiliamps as it is defined in the data sheet of this device, it will be best to stay consistent since an error in conversion could cause serious problems.
Also, I really don¹t see why adding milliamps and millivolts as being a major problems since both of them are commonly used.
As I explained, we want to have some uniformity in properties especially across different bindings. That's not something I want to check in every review. Telling people to add units is enough.
I don't see how adding '000' is a problem.
Rob
Why is it such a big deal to not have a representation for all the common units of measurement? They are already defined so why not add them to your suffix file? I would think that if you are going to make us use this suffix devicetree thing, you would not restrict us to use only the units you think are appropriate.
I wouldn't think you would restrict us to saying it is a 5700ml Hemi V8 would you?
Brian
participants (6)
-
Brian Austin -
Charles Keepax -
Handrigan, Paul -
Paul.Handrigan＠cirrus.com
-
Rob Herring -
Rob Herring