From: Lucas Tanure tanureal@opensource.cirrus.com

[ Upstream commit 19325cfea04446bc79b36bffd4978af15f46a00e ]

This delay is part of the power-up sequence defined in the datasheet. A runtime_resume is a power-up so must also include the delay.

Signed-off-by: Lucas Tanure tanureal@opensource.cirrus.com Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 3 ++- sound/soc/codecs/cs42l42.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 95930018a1a4..dcd2acb2c3ce 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -1796,7 +1796,7 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client, dev_dbg(&i2c_client->dev, "Found reset GPIO\n"); gpiod_set_value_cansleep(cs42l42->reset_gpio, 1); } - mdelay(3); + usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);

/* Request IRQ */ ret = devm_request_threaded_irq(&i2c_client->dev, @@ -1921,6 +1921,7 @@ static int cs42l42_runtime_resume(struct device *dev) }

gpiod_set_value_cansleep(cs42l42->reset_gpio, 1); + usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);

regcache_cache_only(cs42l42->regmap, false); regcache_sync(cs42l42->regmap); diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h index 9b017b76828a..866d7c873e3c 100644 --- a/sound/soc/codecs/cs42l42.h +++ b/sound/soc/codecs/cs42l42.h @@ -740,6 +740,7 @@ #define CS42L42_FRAC2_VAL(val) (((val) & 0xff0000) >> 16)

#define CS42L42_NUM_SUPPLIES 5 +#define CS42L42_BOOT_TIME_US 3000

static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = { "VA",