On 25 Jul 2010, at 23:59, Peter Ujfalusi peter.ujfalusi@Nokia.com wrote:

There is no need to handle POST_PMU, POST_PMD event with the Capture Route widget. It is enough to handle POST_REG event, since that will come when the user changes the routing, and we will switch the needed bits in the registers.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com

Acked-by: Mark Brown broonie@opensource.wolfsonmicro.com

---

sound/soc/codecs/twl4030.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index bd557c2..d401c59 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -1432,11 +1432,9 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { TX2 Left/Right: either analog Left/Right or Digimic1 */ SND_SOC_DAPM_MUX_E("TX1 Capture Route", SND_SOC_NOPM, 0, 0, &twl4030_dapm_micpathtx1_control, micpath_event,

• SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
  

  SND_SOC_DAPM_POST_REG), SND_SOC_DAPM_MUX_E("TX2 Capture Route", SND_SOC_NOPM, 0, 0, &twl4030_dapm_micpathtx2_control, micpath_event,

• SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
  

  SND_SOC_DAPM_POST_REG),

  /* Analog input mixers for the capture amplifiers */

-- 1.7.1.1