This adds support for all sample rates supported by the hardware, Digidesign Mbox 3 supports: {44100, 48000, 88200, 96000}

Fixes syncing clock issues that presented as pops. To test this, without this patch playing 440hz tone produces pops.

Clock is now synced between playback and capture interfaces so no more latency drift issue when using pipewire pro-profile. (https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3900)

Signed-off-by: Manuel Barrio Linares mbarriolinares@gmail.com --- v2: Cleaned up code. Explicit __le32 usage. v3: Get rid of sparse warnings v4: Fixed wrong use of usb_sndctrlpipe to usb_rcvctrlpipe, lines 1743 and 1768

sound/usb/quirks-table.h | 38 +++++++++++++-------- sound/usb/quirks.c | 74 +++++++++++++++++++++++++++++++--------- 2 files changed, 81 insertions(+), 31 deletions(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 5d72dc8441cbb..73abc38a54006 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3013,21 +3013,28 @@ YAMAHA_DEVICE(0x7010, "UB99"), .type = QUIRK_AUDIO_FIXED_ENDPOINT, .data = &(const struct audioformat) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .fmt_bits = 24, .channels = 4, .iface = 2, .altsetting = 1, .altset_idx = 1, .attributes = 0x00, - .endpoint = 0x01, + .endpoint = USB_RECIP_INTERFACE | USB_DIR_OUT, .ep_attr = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .rates = SNDRV_PCM_RATE_48000, - .rate_min = 48000, - .rate_max = 48000, - .nr_rates = 1, + .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000, + .rate_min = 44100, + .rate_max = 96000, + .nr_rates = 4, .rate_table = (unsigned int[]) { - 48000 - } + 44100, 48000, 88200, 96000 + }, + .sync_ep = USB_RECIP_INTERFACE | USB_DIR_IN, + .sync_iface = 3, + .sync_altsetting = 1, + .sync_ep_idx = 1, + .implicit_fb = 1, } }, { @@ -3035,22 +3042,25 @@ YAMAHA_DEVICE(0x7010, "UB99"), .type = QUIRK_AUDIO_FIXED_ENDPOINT, .data = &(const struct audioformat) { .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .fmt_bits = 24, .channels = 4, .iface = 3, .altsetting = 1, .altset_idx = 1, - .endpoint = 0x81, .attributes = 0x00, + .endpoint = USB_RECIP_INTERFACE | USB_DIR_IN, .ep_attr = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, .maxpacksize = 0x009c, - .rates = SNDRV_PCM_RATE_48000, - .rate_min = 48000, - .rate_max = 48000, - .nr_rates = 1, + .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000, + .rate_min = 44100, + .rate_max = 96000, + .nr_rates = 4, .rate_table = (unsigned int[]) { - 48000 - } + 44100, 48000, 88200, 96000 + }, + .implicit_fb = 0, } }, { diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 09712e61c606e..58156fbca02c7 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -984,21 +984,13 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) return 0; }

-static void mbox3_setup_48_24_magic(struct usb_device *dev) +static void mbox3_setup_defaults(struct usb_device *dev) { /* The Mbox 3 is "little endian" */ /* max volume is: 0x0000. */ /* min volume is: 0x0080 (shown in little endian form) */

- - /* Load 48000Hz rate into buffer */ - u8 com_buff[4] = {0x80, 0xbb, 0x00, 0x00}; - - /* Set 48000Hz sample rate */ - snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), - 0x01, 0x21, 0x0100, 0x0001, &com_buff, 4); //Is this really needed? - snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), - 0x01, 0x21, 0x0100, 0x8101, &com_buff, 4); + u8 com_buff[2];

/* Deactivate Tuner */ /* on = 0x01*/ @@ -1008,6 +1000,8 @@ static void mbox3_setup_48_24_magic(struct usb_device *dev) 0x01, 0x21, 0x0003, 0x2001, &com_buff, 1);

/* Set clock source to Internal (as opposed to S/PDIF) */ + /* Internal = 0x01*/ + /* S/PDIF = 0x02*/ com_buff[0] = 0x01; snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x0100, 0x8001, &com_buff, 1); @@ -1113,9 +1107,11 @@ static void mbox3_setup_48_24_magic(struct usb_device *dev) 1, 0x21, 0x0107, 0x4201, &com_buff, 2);

/* Toggle allowing host control */ + /* Not needed com_buff[0] = 0x02; snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 3, 0x21, 0x0000, 0x2001, &com_buff, 1); + */

/* Do not dim fx returns */ com_buff[0] = 0x00; @@ -1259,26 +1255,27 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev) descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength);

if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) { - dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size); + dev_err(&dev->dev, "MBOX3: Invalid descriptor size=%d.\n", descriptor_size); return -ENODEV; }

- dev_dbg(&dev->dev, "device initialised!\n"); + dev_dbg(&dev->dev, "MBOX3: device initialised!\n");

err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, sizeof(dev->descriptor)); config = dev->actconfig; if (err < 0) - dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); + dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err);

err = usb_reset_configuration(dev); if (err < 0) - dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); - dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n", + dev_dbg(&dev->dev, "MBOX3: error usb_reset_configuration: %d\n", err); + + dev_dbg(&dev->dev, "MBOX3: new boot length = %d\n", le16_to_cpu(get_cfg_desc(config)->wTotalLength));

- mbox3_setup_48_24_magic(dev); - dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz"); + mbox3_setup_defaults(dev); + dev_info(&dev->dev, "MBOX3: Initialized.");

return 0; /* Successful boot */ } @@ -1734,6 +1731,46 @@ static int pioneer_djm_set_format_quirk(struct snd_usb_substream *subs, return 0; }

+static void mbox3_set_format_quirk(struct snd_usb_substream *subs, + const struct audioformat *fmt) +{ + __le32 buff4 = 0; + u8 buff1 = 0x01; + u32 new_rate = subs->data_endpoint->cur_rate; + u32 current_rate; + + // Get current rate from card and check if changing it is needed + snd_usb_ctl_msg(subs->dev, usb_rcvctrlpipe(subs->dev, 0), + 0x01, 0x21 | USB_DIR_IN, 0x0100, 0x8101, &buff4, 4); + current_rate = le32_to_cpu(buff4); + dev_dbg(&subs->dev->dev, + "MBOX3: Current configured sample rate: %d", current_rate); + if (current_rate == new_rate) { + dev_dbg(&subs->dev->dev, + "MBOX3: No change needed (current rate:%d == new rate:%d)", + current_rate, new_rate); + return; + } + + // Set new rate + dev_info(&subs->dev->dev, + "MBOX3: Changing sample rate to: %d", new_rate); + buff4 = cpu_to_le32(new_rate); + snd_usb_ctl_msg(subs->dev, usb_sndctrlpipe(subs->dev, 0), + 0x01, 0x21, 0x0100, 0x8101, &buff4, 4); + + // Set clock source to Internal + snd_usb_ctl_msg(subs->dev, usb_sndctrlpipe(subs->dev, 0), + 0x01, 0x21, 0x0100, 0x8001, &buff1, 1); + + // Check whether the change was successful + buff4 = 0; + snd_usb_ctl_msg(subs->dev, usb_rcvctrlpipe(subs->dev, 0), + 0x01, 0x21 | USB_DIR_IN, 0x0100, 0x8101, &buff4, 4); + if (new_rate != le32_to_cpu(buff4)) + dev_warn(&subs->dev->dev, "MBOX3: Couldn't set the sample rate"); +} + void snd_usb_set_format_quirk(struct snd_usb_substream *subs, const struct audioformat *fmt) { @@ -1755,6 +1792,9 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs, case USB_ID(0x08e4, 0x0163): /* Pioneer DJM-850 */ pioneer_djm_set_format_quirk(subs, 0x0086); break; + case USB_ID(0x0dba, 0x5000): + mbox3_set_format_quirk(subs, fmt); /* Digidesign Mbox 3 */ + break; } }