[alsa-devel] [PATCH 3/3] ASoC: cs42l73: Add Device Tree support for CS42L73
This patch adds device tree support for the cs42l73 codec. Reset Gpio and Charge Pump Frequency are available
Signed-off-by: Brian Austin brian.austin@cirrus.com --- .../devicetree/bindings/sound/cs42l73.txt | 22 +++++++++++++++ sound/soc/codecs/cs42l73.c | 31 +++++++++++++++++++--- 2 files changed, 50 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/cs42l73.txt
diff --git a/Documentation/devicetree/bindings/sound/cs42l73.txt b/Documentation/devicetree/bindings/sound/cs42l73.txt new file mode 100644 index 0000000..5a86495 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs42l73.txt @@ -0,0 +1,22 @@ +CS42L73 audio CODEC + +Required properties: + + - compatible : "cirrus,cs42l73" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset_gpio : a GPIO spec for the reset pin. + - chgfreq : Charge Pump Frequency values 0x00-0x0F + + +Example: + +codec: cs42l73@4a { + compatible = "cirrus,cs42l73"; + reg = <0x4a>; + reset_gpio = <&gpio 10 0>; + chgfreq = <0x05>; +}; \ No newline at end of file diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c index e3187cc..4607958 100644 --- a/sound/soc/codecs/cs42l73.c +++ b/sound/soc/codecs/cs42l73.c @@ -17,7 +17,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/of_gpio.h> #include <linux/pm.h> #include <linux/i2c.h> #include <linux/regmap.h> @@ -1414,6 +1414,7 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client, struct cs42l73_private *cs42l73; struct cs42l73_platform_data *pdata = dev_get_platdata(&i2c_client->dev); int ret; + u32 val32; unsigned int devid = 0; unsigned int reg;
@@ -1431,9 +1432,26 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client, return ret; }
- if (pdata) + if (pdata) { cs42l73->pdata = *pdata; - + } else { + pdata = devm_kzalloc(&i2c_client->dev, + sizeof(struct cs42l73_platform_data), + GFP_KERNEL); + if (!pdata) { + dev_err(&i2c_client->dev, "could not allocate pdata\n"); + return -ENOMEM; + } + if (i2c_client->dev.of_node) { + if (of_property_read_u32(i2c_client->dev.of_node, + "chgfreq", &val32) >= 0) + pdata->chgfreq = val32; + } + pdata->reset_gpio = of_get_named_gpio(i2c_client->dev.of_node, + "reset-gpio", 0); + cs42l73->pdata = *pdata; + } + i2c_set_clientdata(i2c_client, cs42l73);
if ( cs42l73->pdata.reset_gpio) { @@ -1493,6 +1511,12 @@ static int cs42l73_i2c_remove(struct i2c_client *client) return 0; }
+static const struct of_device_id cs42l73_of_match[] = { + { .compatible = "cirrus,cs42l73", }, + {}, +}; +MODULE_DEVICE_TABLE(of, cs42l73_of_match); + static const struct i2c_device_id cs42l73_id[] = { {"cs42l73", 0}, {} @@ -1504,6 +1528,7 @@ static struct i2c_driver cs42l73_i2c_driver = { .driver = { .name = "cs42l73", .owner = THIS_MODULE, + .of_match_table = cs42l73_of_match, }, .id_table = cs42l73_id, .probe = cs42l73_i2c_probe,
On Fri, 18 Oct 2013, Brian Austin wrote:
This patch adds device tree support for the cs42l73 codec. Reset Gpio and Charge Pump Frequency are available
Signed-off-by: Brian Austin brian.austin@cirrus.com
Please disregard, I sent the wrong version.
Sorry
participants (1)
-
Brian Austin