[alsa-devel] [PATCH v2] dbri: Fix compiler warning
dbri uses 'u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enabled 64bit DMA and therefore dma_addr_t became of type u64. This makes 'incompatible pointer type' warnings inevitable.
e.g. sound/sparc/dbri.c: In function ‘snd_dbri_create’: sound/sparc/dbri.c:2538: warning: passing argument 3 of ‘dma_zalloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:608: note: expected ‘dma_addr_t *’ but argument is of type ‘u32 *’
For the record, dbri(sbus) driver never executes on sun4v. Therefore even though 64bit DMA is enabled on SPARC, dbri continues to use legacy iommu that guarantees DMA address is always in 32bit range.
This patch resolves above compiler warning.
Signed-off-by: Tushar Dave tushar.n.dave@oracle.com Reviewed-by: thomas tai thomas.tai@oracle.com --- v1->v2: - commit message updated.
sound/sparc/dbri.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 0190cb6..542c1b5 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -304,7 +304,7 @@ struct snd_dbri { spinlock_t lock;
struct dbri_dma *dma; /* Pointer to our DMA block */ - u32 dma_dvma; /* DBRI visible DMA address */ + dma_addr_t dma_dvma; /* DBRI visible DMA address */
void __iomem *regs; /* dbri HW regs */ int dbri_irqp; /* intr queue pointer */ @@ -657,12 +657,14 @@ static void dbri_cmdwait(struct snd_dbri *dbri) */ static s32 *dbri_cmdlock(struct snd_dbri *dbri, int len) { + u32 dvma_addr = (u32)dbri->dma_dvma; + /* Space for 2 WAIT cmds (replaced later by 1 JUMP cmd) */ len += 2; spin_lock(&dbri->cmdlock); if (dbri->cmdptr - dbri->dma->cmd + len < DBRI_NO_CMDS - 2) return dbri->cmdptr + 2; - else if (len < sbus_readl(dbri->regs + REG8) - dbri->dma_dvma) + else if (len < sbus_readl(dbri->regs + REG8) - dvma_addr) return dbri->dma->cmd; else printk(KERN_ERR "DBRI: no space for commands."); @@ -680,6 +682,7 @@ static s32 *dbri_cmdlock(struct snd_dbri *dbri, int len) */ static void dbri_cmdsend(struct snd_dbri *dbri, s32 *cmd, int len) { + u32 dvma_addr = (u32)dbri->dma_dvma; s32 tmp, addr; static int wait_id = 0;
@@ -689,7 +692,7 @@ static void dbri_cmdsend(struct snd_dbri *dbri, s32 *cmd, int len) *(cmd+1) = DBRI_CMD(D_WAIT, 1, wait_id);
/* Replace the last command with JUMP */ - addr = dbri->dma_dvma + (cmd - len - dbri->dma->cmd) * sizeof(s32); + addr = dvma_addr + (cmd - len - dbri->dma->cmd) * sizeof(s32); *(dbri->cmdptr+1) = addr; *(dbri->cmdptr) = DBRI_CMD(D_JUMP, 0, 0);
@@ -747,6 +750,7 @@ static void dbri_reset(struct snd_dbri *dbri) /* Lock must not be held before calling this */ static void dbri_initialize(struct snd_dbri *dbri) { + u32 dvma_addr = (u32)dbri->dma_dvma; s32 *cmd; u32 dma_addr; unsigned long flags; @@ -764,7 +768,7 @@ static void dbri_initialize(struct snd_dbri *dbri) /* * Initialize the interrupt ring buffer. */ - dma_addr = dbri->dma_dvma + dbri_dma_off(intr, 0); + dma_addr = dvma_addr + dbri_dma_off(intr, 0); dbri->dma->intr[0] = dma_addr; dbri->dbri_irqp = 1; /* @@ -778,7 +782,7 @@ static void dbri_initialize(struct snd_dbri *dbri) dbri->cmdptr = cmd; *(cmd++) = DBRI_CMD(D_WAIT, 1, 0); *(cmd++) = DBRI_CMD(D_WAIT, 1, 0); - dma_addr = dbri->dma_dvma + dbri_dma_off(cmd, 0); + dma_addr = dvma_addr + dbri_dma_off(cmd, 0); sbus_writel(dma_addr, dbri->regs + REG8); spin_unlock(&dbri->cmdlock);
@@ -1077,6 +1081,7 @@ static void recv_fixed(struct snd_dbri *dbri, int pipe, volatile __u32 *ptr) static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) { struct dbri_streaminfo *info = &dbri->stream_info[streamno]; + u32 dvma_addr = (u32)dbri->dma_dvma; __u32 dvma_buffer; int desc; int len; @@ -1177,7 +1182,7 @@ static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) else { dbri->next_desc[last_desc] = desc; dbri->dma->desc[last_desc].nda = - dbri->dma_dvma + dbri_dma_off(desc, desc); + dvma_addr + dbri_dma_off(desc, desc); }
last_desc = desc; @@ -1192,7 +1197,7 @@ static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) }
dbri->dma->desc[last_desc].nda = - dbri->dma_dvma + dbri_dma_off(desc, first_desc); + dvma_addr + dbri_dma_off(desc, first_desc); dbri->next_desc[last_desc] = first_desc; dbri->pipes[info->pipe].first_desc = first_desc; dbri->pipes[info->pipe].desc = first_desc; @@ -1697,6 +1702,7 @@ calling dbri_process_interrupt_buffer(), which works even if the CPU's static void xmit_descs(struct snd_dbri *dbri) { struct dbri_streaminfo *info; + u32 dvma_addr = (u32)dbri->dma_dvma; s32 *cmd; unsigned long flags; int first_td; @@ -1718,7 +1724,7 @@ static void xmit_descs(struct snd_dbri *dbri) *(cmd++) = DBRI_CMD(D_SDP, 0, dbri->pipes[info->pipe].sdp | D_SDP_P | D_SDP_EVERY | D_SDP_C); - *(cmd++) = dbri->dma_dvma + + *(cmd++) = dvma_addr + dbri_dma_off(desc, first_td); dbri_cmdsend(dbri, cmd, 2);
@@ -1740,7 +1746,7 @@ static void xmit_descs(struct snd_dbri *dbri) *(cmd++) = DBRI_CMD(D_SDP, 0, dbri->pipes[info->pipe].sdp | D_SDP_P | D_SDP_EVERY | D_SDP_C); - *(cmd++) = dbri->dma_dvma + + *(cmd++) = dvma_addr + dbri_dma_off(desc, first_td); dbri_cmdsend(dbri, cmd, 2);
@@ -2539,7 +2545,7 @@ static int snd_dbri_create(struct snd_card *card, if (!dbri->dma) return -ENOMEM;
- dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08x)\n", + dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08llx)\n", dbri->dma, dbri->dma_dvma);
/* Map the registers into memory. */
On Thu, 24 Nov 2016 04:15:15 +0100, Tushar Dave wrote:
@@ -2539,7 +2545,7 @@ static int snd_dbri_create(struct snd_card *card, if (!dbri->dma) return -ENOMEM;
- dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08x)\n",
- dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08llx)\n", dbri->dma, dbri->dma_dvma);
Better to use %pad for dma_addr_t here. If the config doesn't enable ATU, dma_addr_t would be still u32, and your change will be buggy.
thanks,
Takashi
From: Takashi Iwai tiwai@suse.de Date: Thu, 24 Nov 2016 13:59:10 +0100
On Thu, 24 Nov 2016 04:15:15 +0100, Tushar Dave wrote:
@@ -2539,7 +2545,7 @@ static int snd_dbri_create(struct snd_card *card, if (!dbri->dma) return -ENOMEM;
- dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08x)\n",
- dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08llx)\n", dbri->dma, dbri->dma_dvma);
Better to use %pad for dma_addr_t here. If the config doesn't enable ATU, dma_addr_t would be still u32, and your change will be buggy.
dma_addr_t is unconditionally a 64-bit type on sparc64.
However, you are right in that on sparc32 it is still 32-bit.
participants (3)
-
David Miller
-
Takashi Iwai
-
Tushar Dave