I am trying to develop a driver the the Maxim MAX9744 20W Class D Stereo Amplifier. (see https://www.maximintegrated.com/en/products/analog/audio/MAX9744.html https://www.maximintegrated.com/en/products/analog/audio/MAX9744.html). It is very similar to the MAX9768 10W Class D Mono amplifier which has a linux driver. (see https://www.maximintegrated.com/en/products/analog/audio/MAX9768.html https://www.maximintegrated.com/en/products/analog/audio/MAX9768.html) From a control perspective, both look to be the same from their data sheets. Volume is controlled through i2c, and it has mute and shutdown controlled through gpio. The MAX9744 has a volume control that changes both channels together. When I try to use the MAX9768 driver it shows up as a mono amplifier in alsamixer. What do I need to change in the driver to have it recognize stereo input and output but with the volume control tied together (not independent for each channel)? It seems like I should be able to modify the MAX9768 driver to work with the MAX9744.

I have an Adafruit board with the MAX9744 amplifier on it so it is easy to test: https://www.adafruit.com/product/1752 https://www.adafruit.com/product/1752.