[alsa-devel] [PATCH 0/3] alsa-lib - improve surround 2.1 support
So, in order to support 2.1 surround on both 4-channels (e g FL FR LFE LFE, on internal subwoofer) and 6-channels (e g FL FR RL RR C LFE, on desktops with 5.1 out), I needed to make the route plugin more chmap aware.
This also included allowing a new syntax for the ttable, which I think is quite nice. The new syntax also falls back to ALSAs standard chmap in case the hardware does not support it.
David Henningsson (3): route: Allow chmap syntax for slave channels in ttable route: Select slave chmap based on ttable information conf: Allow 2.1 surround to use different number of channels
src/conf/pcm/surround21.conf | 7 +- src/pcm/pcm_route.c | 304 ++++++++++++++++++++++++++++++++++++++----- 2 files changed, 271 insertions(+), 40 deletions(-)
Instead of writing e g "0" and "1", one can now write "FL" and "FR" instead.
E g: ttable.0.FL 1 ttable.1.FR 1 ttable.2.LFE 1
Signed-off-by: David Henningsson david.henningsson@canonical.com --- src/pcm/pcm_route.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/src/pcm/pcm_route.c b/src/pcm/pcm_route.c index 2beedf6..ffc283f 100644 --- a/src/pcm/pcm_route.c +++ b/src/pcm/pcm_route.c @@ -789,6 +789,24 @@ static void snd_pcm_route_dump(snd_pcm_t *pcm, snd_output_t *out) snd_pcm_dump(route->plug.gen.slave, out); }
+static int safe_chmapchannel(const char *id, long *channel) +{ + int err; + int ch; + err = safe_strtol(id, channel); + if (err >= 0) + return err; + + ch = (int) snd_pcm_chmap_from_string(id); + if (ch == -1) + return -EINVAL; + + /* For now, assume standard channel mapping */ + *channel = ch - SND_CHMAP_FL; + return 0; +} + + static const snd_pcm_ops_t snd_pcm_route_ops = { .close = snd_pcm_route_close, .info = snd_pcm_generic_info, @@ -983,7 +1001,7 @@ int snd_pcm_route_determine_ttable(snd_config_t *tt, const char *id; if (snd_config_get_id(jnode, &id) < 0) continue; - err = safe_strtol(id, &schannel); + err = safe_chmapchannel(id, &schannel); if (err < 0) { SNDERR("Invalid slave channel: %s", id); return -EINVAL; @@ -1046,7 +1064,7 @@ int snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *tt const char *id; if (snd_config_get_id(jnode, &id) < 0) continue; - err = safe_strtol(id, &schannel); + err = safe_chmapchannel(id, &schannel); if (err < 0 || schannel < 0 || (unsigned int) schannel > tt_ssize || (schannels > 0 && schannel >= schannels)) {
At Fri, 21 Feb 2014 16:24:20 +0100, David Henningsson wrote:
Instead of writing e g "0" and "1", one can now write "FL" and "FR" instead.
E g: ttable.0.FL 1 ttable.1.FR 1 ttable.2.LFE 1
Signed-off-by: David Henningsson david.henningsson@canonical.com
src/pcm/pcm_route.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/src/pcm/pcm_route.c b/src/pcm/pcm_route.c index 2beedf6..ffc283f 100644 --- a/src/pcm/pcm_route.c +++ b/src/pcm/pcm_route.c @@ -789,6 +789,24 @@ static void snd_pcm_route_dump(snd_pcm_t *pcm, snd_output_t *out) snd_pcm_dump(route->plug.gen.slave, out); }
+static int safe_chmapchannel(const char *id, long *channel)
You need no safe_ prefix for this function. safe_strtol() is just because strtol() already exists in an unsafe way.
Besides that, I find it also OK to just return the channel (>= 0) or a negative error. But it's no big matter in which form is.
Takashi
+{
- int err;
- int ch;
- err = safe_strtol(id, channel);
- if (err >= 0)
return err;
- ch = (int) snd_pcm_chmap_from_string(id);
- if (ch == -1)
return -EINVAL;
- /* For now, assume standard channel mapping */
- *channel = ch - SND_CHMAP_FL;
- return 0;
+}
static const snd_pcm_ops_t snd_pcm_route_ops = { .close = snd_pcm_route_close, .info = snd_pcm_generic_info, @@ -983,7 +1001,7 @@ int snd_pcm_route_determine_ttable(snd_config_t *tt, const char *id; if (snd_config_get_id(jnode, &id) < 0) continue;
err = safe_strtol(id, &schannel);
err = safe_chmapchannel(id, &schannel); if (err < 0) { SNDERR("Invalid slave channel: %s", id); return -EINVAL;
@@ -1046,7 +1064,7 @@ int snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *tt const char *id; if (snd_config_get_id(jnode, &id) < 0) continue;
err = safe_strtol(id, &schannel);
err = safe_chmapchannel(id, &schannel); if (err < 0 || schannel < 0 || (unsigned int) schannel > tt_ssize || (schannels > 0 && schannel >= schannels)) {
-- 1.9.0
It means we need to initialize this order:
1) Read the ttable to figure out which channels are present 2) Open slave pcm and find a matching chmap 3) Determine size of ttable (this can now depend on the chmap) 4) Read ttable coefficients 5) At prepare time, select the matching chmap
Signed-off-by: David Henningsson david.henningsson@canonical.com --- src/pcm/pcm_route.c | 300 ++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 257 insertions(+), 43 deletions(-)
diff --git a/src/pcm/pcm_route.c b/src/pcm/pcm_route.c index ffc283f..355da1e 100644 --- a/src/pcm/pcm_route.c +++ b/src/pcm/pcm_route.c @@ -103,6 +103,7 @@ typedef struct { snd_pcm_format_t sformat; int schannels; snd_pcm_route_params_t params; + snd_pcm_chmap_t *chmap; } snd_pcm_route_t;
#endif /* DOC_HIDDEN */ @@ -518,6 +519,7 @@ static int snd_pcm_route_close(snd_pcm_t *pcm) } free(params->dsts); } + free(route->chmap); return snd_pcm_generic_close(pcm); }
@@ -789,21 +791,168 @@ static void snd_pcm_route_dump(snd_pcm_t *pcm, snd_output_t *out) snd_pcm_dump(route->plug.gen.slave, out); }
-static int safe_chmapchannel(const char *id, long *channel) +static int safe_chmapchannel(const char *id, snd_pcm_chmap_t *chmap, + long *channel, int channel_size) { - int err; int ch; - err = safe_strtol(id, channel); - if (err >= 0) - return err; + if (safe_strtol(id, channel) >= 0) + return 1;
ch = (int) snd_pcm_chmap_from_string(id); if (ch == -1) return -EINVAL;
- /* For now, assume standard channel mapping */ - *channel = ch - SND_CHMAP_FL; + if (chmap) { + int i, r = 0; + /* Start with highest channel to simplify implementation of + determine ttable size */ + for (i = chmap->channels - 1; i >= 0; i--) { + if ((int) chmap->pos[i] != ch) + continue; + if (r >= channel_size) + continue; + channel[r++] = i; + } + return r; + } + else { + /* Assume ALSA standard channel mapping */ + *channel = ch - SND_CHMAP_FL; + return 1; + } +} + +#define MAX_CHMAP_CHANNELS 256 + +static int determine_chmap(snd_config_t *tt, snd_pcm_chmap_t **tt_chmap) +{ + snd_config_iterator_t i, inext; + snd_pcm_chmap_t *chmap; + + assert(tt && tt_chmap); + chmap = malloc(sizeof(snd_pcm_chmap_t) + + MAX_CHMAP_CHANNELS * sizeof(unsigned int)); + + chmap->channels = 0; + snd_config_for_each(i, inext, tt) { + const char *id; + snd_config_iterator_t j, jnext; + snd_config_t *in = snd_config_iterator_entry(i); + + if (!snd_config_get_id(in, &id) < 0) + continue; + if (snd_config_get_type(in) != SND_CONFIG_TYPE_COMPOUND) + goto err; + snd_config_for_each(j, jnext, in) { + int ch, k, found; + long schannel; + snd_config_t *jnode = snd_config_iterator_entry(j); + if (snd_config_get_id(jnode, &id) < 0) + continue; + if (safe_strtol(id, &schannel) >= 0) + continue; + ch = (int) snd_pcm_chmap_from_string(id); + if (ch == -1) + goto err; + + found = 0; + for (k = 0; k < (int) chmap->channels; k++) + if (ch == (int) chmap->pos[k]) { + found = 1; + break; + } + if (found) + continue; + + if (chmap->channels >= MAX_CHMAP_CHANNELS) { + SNDERR("Too many channels in ttable chmap"); + goto err; + } + chmap->pos[chmap->channels++] = ch; + } + } + + + *tt_chmap = chmap; return 0; + +err: + *tt_chmap = NULL; + free(chmap); + return -EINVAL; +} + +static int find_matching_chmap(snd_pcm_t *spcm, snd_pcm_chmap_t *tt_chmap, + snd_pcm_chmap_t **found_chmap, int *schannels) +{ + snd_pcm_chmap_query_t** chmaps = snd_pcm_query_chmaps(spcm); + int i; + + *found_chmap = NULL; + + if (chmaps == NULL) + return 0; /* chmap API not supported for this slave */ + + for (i = 0; chmaps[i]; i++) { + unsigned int j, k; + int match = 1; + snd_pcm_chmap_t *c = &chmaps[i]->map; + if (*schannels >= 0 && (int) c->channels != *schannels) + continue; + + for (j = 0; j < tt_chmap->channels; j++) { + int found = 0; + unsigned int ch = tt_chmap->pos[j]; + for (k = 0; k < c->channels; k++) + if (c->pos[k] == ch) { + found = 1; + break; + } + if (!found) { + match = 0; + break; + } + } + + if (match) { + int size = sizeof(snd_pcm_chmap_t) + c->channels * sizeof(unsigned int); + *found_chmap = malloc(size); + memcpy(*found_chmap, c, size); + *schannels = c->channels; + break; + } + } + + snd_pcm_free_chmaps(chmaps); + + if (*found_chmap == NULL) { + SNDERR("Found no matching channel map"); + return -EINVAL; + } + return 0; +} + +static int route_chmap_init(snd_pcm_t *pcm) +{ + int set_map = 0; + snd_pcm_chmap_t *current; + snd_pcm_route_t *route = pcm->private_data; + if (!route->chmap) + return 0; + if (snd_pcm_state(pcm) != SND_PCM_STATE_PREPARED) + return 0; + + current = snd_pcm_get_chmap(route->plug.gen.slave); + if (!current) + return -ENOSYS; + if (current->channels != route->chmap->channels) + set_map = 1; + else set_map = memcmp(current->pos, route->chmap->pos, current->channels); + free(current); + if (!set_map) + return 0; + + return snd_pcm_set_chmap(route->plug.gen.slave, route->chmap); }
@@ -939,6 +1088,7 @@ int snd_pcm_route_open(snd_pcm_t **pcmp, const char *name, route->plug.undo_write = snd_pcm_plugin_undo_write_generic; route->plug.gen.slave = slave; route->plug.gen.close_slave = close_slave; + route->plug.init = route_chmap_init;
err = snd_pcm_new(&pcm, SND_PCM_TYPE_ROUTE, name, slave->stream, slave->mode); if (err < 0) { @@ -963,16 +1113,10 @@ int snd_pcm_route_open(snd_pcm_t **pcmp, const char *name, return 0; }
-/** - * \brief Determine route matrix sizes - * \param tt Configuration root describing route matrix - * \param tt_csize Returned client size in elements - * \param tt_ssize Returned slave size in elements - * \retval zero on success otherwise a negative error code - */ -int snd_pcm_route_determine_ttable(snd_config_t *tt, - unsigned int *tt_csize, - unsigned int *tt_ssize) +static int _snd_pcm_route_determine_ttable(snd_config_t *tt, + unsigned int *tt_csize, + unsigned int *tt_ssize, + snd_pcm_chmap_t *chmap) { snd_config_iterator_t i, inext; long csize = 0, ssize = 0; @@ -1001,7 +1145,7 @@ int snd_pcm_route_determine_ttable(snd_config_t *tt, const char *id; if (snd_config_get_id(jnode, &id) < 0) continue; - err = safe_chmapchannel(id, &schannel); + err = safe_chmapchannel(id, chmap, &schannel, 1); if (err < 0) { SNDERR("Invalid slave channel: %s", id); return -EINVAL; @@ -1020,6 +1164,20 @@ int snd_pcm_route_determine_ttable(snd_config_t *tt, }
/** + * \brief Determine route matrix sizes + * \param tt Configuration root describing route matrix + * \param tt_csize Returned client size in elements + * \param tt_ssize Returned slave size in elements + * \retval zero on success otherwise a negative error code + */ +int snd_pcm_route_determine_ttable(snd_config_t *tt, + unsigned int *tt_csize, + unsigned int *tt_ssize) +{ + return _snd_pcm_route_determine_ttable(tt, tt_csize, tt_ssize, NULL); +} + +/** * \brief Load route matrix * \param tt Configuration root describing route matrix * \param ttable Returned route matrix @@ -1030,10 +1188,10 @@ int snd_pcm_route_determine_ttable(snd_config_t *tt, * \param schannels Slave channels * \retval zero on success otherwise a negative error code */ -int snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *ttable, - unsigned int tt_csize, unsigned int tt_ssize, - unsigned int *tt_cused, unsigned int *tt_sused, - int schannels) +static int _snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *ttable, + unsigned int tt_csize, unsigned int tt_ssize, + unsigned int *tt_cused, unsigned int *tt_sused, + int schannels, snd_pcm_chmap_t *chmap) { int cused = -1; int sused = -1; @@ -1060,17 +1218,18 @@ int snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *tt snd_config_for_each(j, jnext, in) { snd_config_t *jnode = snd_config_iterator_entry(j); double value; - long schannel; + int ss; + long *scha = alloca(tt_ssize * sizeof(long)); const char *id; if (snd_config_get_id(jnode, &id) < 0) continue; - err = safe_chmapchannel(id, &schannel); - if (err < 0 || - schannel < 0 || (unsigned int) schannel > tt_ssize || - (schannels > 0 && schannel >= schannels)) { + + ss = safe_chmapchannel(id, chmap, scha, tt_ssize); + if (ss < 0) { SNDERR("Invalid slave channel: %s", id); return -EINVAL; } + err = snd_config_get_real(jnode, &value); if (err < 0) { long v; @@ -1081,9 +1240,18 @@ int snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *tt } value = v; } - ttable[cchannel * tt_ssize + schannel] = value; - if (schannel > sused) - sused = schannel; + + for (k = 0; (int) k < ss; k++) { + long schannel = scha[k]; + if (schannel < 0 || (unsigned int) schannel > tt_ssize || + (schannels > 0 && schannel >= schannels)) { + SNDERR("Invalid slave channel: %s", id); + return -EINVAL; + } + ttable[cchannel * tt_ssize + schannel] = value; + if (schannel > sused) + sused = schannel; + } } if (cchannel > cused) cused = cchannel; @@ -1093,6 +1261,26 @@ int snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *tt return 0; }
+/** + * \brief Load route matrix + * \param tt Configuration root describing route matrix + * \param ttable Returned route matrix + * \param tt_csize Client size in elements + * \param tt_ssize Slave size in elements + * \param tt_cused Used client elements + * \param tt_sused Used slave elements + * \param schannels Slave channels + * \retval zero on success otherwise a negative error code + */ +int snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *ttable, + unsigned int tt_csize, unsigned int tt_ssize, + unsigned int *tt_cused, unsigned int *tt_sused, + int schannels) +{ + return _snd_pcm_route_load_ttable(tt, ttable, tt_csize, tt_ssize, + tt_cused, tt_sused, schannels, NULL); +} + /*! \page pcm_plugins
\section pcm_plugins_route Plugin: Route & Volume @@ -1100,6 +1288,9 @@ int snd_pcm_route_load_ttable(snd_config_t *tt, snd_pcm_route_ttable_entry_t *tt This plugin converts channels and applies volume during the conversion. The format and rate must match for both of them.
+SCHANNEL can be a channel name instead of a number (e g FL, LFE). +If so, a matching channel map will be selected for the slave. + \code pcm.name { type route # Route & Volume conversion PCM @@ -1150,6 +1341,7 @@ int _snd_pcm_route_open(snd_pcm_t **pcmp, const char *name, int err; snd_pcm_t *spcm; snd_config_t *slave = NULL, *sconf; + snd_pcm_chmap_t *tt_chmap, *chmap; snd_pcm_format_t sformat = SND_PCM_FORMAT_UNKNOWN; int schannels = -1; snd_config_t *tt = NULL; @@ -1198,37 +1390,59 @@ int _snd_pcm_route_open(snd_pcm_t **pcmp, const char *name, return -EINVAL; }
- err = snd_pcm_route_determine_ttable(tt, &csize, &ssize); + err = determine_chmap(tt, &tt_chmap); if (err < 0) { - snd_config_delete(sconf); + free(ttable); return err; } - ttable = malloc(csize * ssize * sizeof(snd_pcm_route_ttable_entry_t)); - if (ttable == NULL) { - snd_config_delete(sconf); - return -ENOMEM; - } - err = snd_pcm_route_load_ttable(tt, ttable, csize, ssize, - &cused, &sused, schannels); + + err = snd_pcm_open_slave(&spcm, root, sconf, stream, mode, conf); + snd_config_delete(sconf); if (err < 0) { + free(tt_chmap); free(ttable); - snd_config_delete(sconf); return err; }
- err = snd_pcm_open_slave(&spcm, root, sconf, stream, mode, conf); - snd_config_delete(sconf); + if (tt_chmap) { + err = find_matching_chmap(spcm, tt_chmap, &chmap, &schannels); + free(tt_chmap); + if (err < 0) + return err; + } + + err = _snd_pcm_route_determine_ttable(tt, &csize, &ssize, chmap); if (err < 0) { + free(chmap); + snd_pcm_close(spcm); + return err; + } + ttable = malloc(csize * ssize * sizeof(snd_pcm_route_ttable_entry_t)); + if (ttable == NULL) { + free(chmap); + snd_pcm_close(spcm); + return -ENOMEM; + } + err = _snd_pcm_route_load_ttable(tt, ttable, csize, ssize, + &cused, &sused, schannels, chmap); + if (err < 0) { + free(chmap); free(ttable); + snd_pcm_close(spcm); return err; } + err = snd_pcm_route_open(pcmp, name, sformat, schannels, ttable, ssize, cused, sused, spcm, 1); free(ttable); - if (err < 0) + if (err < 0) { + free(chmap); snd_pcm_close(spcm); + } + ((snd_pcm_route_t*) (*pcmp)->private_data)->chmap = chmap; + return err; } #ifndef DOC_HIDDEN
At Fri, 21 Feb 2014 16:24:21 +0100, David Henningsson wrote:
It means we need to initialize this order:
- Read the ttable to figure out which channels are present
- Open slave pcm and find a matching chmap
- Determine size of ttable (this can now depend on the chmap)
- Read ttable coefficients
- At prepare time, select the matching chmap
Signed-off-by: David Henningsson david.henningsson@canonical.com
src/pcm/pcm_route.c | 300 ++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 257 insertions(+), 43 deletions(-)
diff --git a/src/pcm/pcm_route.c b/src/pcm/pcm_route.c index ffc283f..355da1e 100644 --- a/src/pcm/pcm_route.c +++ b/src/pcm/pcm_route.c @@ -103,6 +103,7 @@ typedef struct { snd_pcm_format_t sformat; int schannels; snd_pcm_route_params_t params;
- snd_pcm_chmap_t *chmap;
} snd_pcm_route_t;
#endif /* DOC_HIDDEN */ @@ -518,6 +519,7 @@ static int snd_pcm_route_close(snd_pcm_t *pcm) } free(params->dsts); }
- free(route->chmap); return snd_pcm_generic_close(pcm);
}
@@ -789,21 +791,168 @@ static void snd_pcm_route_dump(snd_pcm_t *pcm, snd_output_t *out) snd_pcm_dump(route->plug.gen.slave, out); }
-static int safe_chmapchannel(const char *id, long *channel) +static int safe_chmapchannel(const char *id, snd_pcm_chmap_t *chmap,
long *channel, int channel_size)
A brief description of the function would be helpful, as the code becomes no longer trivial by this patch.
{
- int err; int ch;
- err = safe_strtol(id, channel);
- if (err >= 0)
return err;
if (safe_strtol(id, channel) >= 0)
return 1;
ch = (int) snd_pcm_chmap_from_string(id); if (ch == -1) return -EINVAL;
- /* For now, assume standard channel mapping */
- *channel = ch - SND_CHMAP_FL;
- if (chmap) {
int i, r = 0;
/* Start with highest channel to simplify implementation of
determine ttable size */
for (i = chmap->channels - 1; i >= 0; i--) {
if ((int) chmap->pos[i] != ch)
continue;
if (r >= channel_size)
continue;
channel[r++] = i;
}
return r;
- }
- else {
/* Assume ALSA standard channel mapping */
*channel = ch - SND_CHMAP_FL;
return 1;
- }
+}
+#define MAX_CHMAP_CHANNELS 256
+static int determine_chmap(snd_config_t *tt, snd_pcm_chmap_t **tt_chmap) +{
- snd_config_iterator_t i, inext;
- snd_pcm_chmap_t *chmap;
- assert(tt && tt_chmap);
- chmap = malloc(sizeof(snd_pcm_chmap_t) +
MAX_CHMAP_CHANNELS * sizeof(unsigned int));
- chmap->channels = 0;
- snd_config_for_each(i, inext, tt) {
const char *id;
snd_config_iterator_t j, jnext;
snd_config_t *in = snd_config_iterator_entry(i);
if (!snd_config_get_id(in, &id) < 0)
continue;
if (snd_config_get_type(in) != SND_CONFIG_TYPE_COMPOUND)
goto err;
snd_config_for_each(j, jnext, in) {
int ch, k, found;
long schannel;
snd_config_t *jnode = snd_config_iterator_entry(j);
if (snd_config_get_id(jnode, &id) < 0)
continue;
if (safe_strtol(id, &schannel) >= 0)
continue;
ch = (int) snd_pcm_chmap_from_string(id);
if (ch == -1)
goto err;
found = 0;
for (k = 0; k < (int) chmap->channels; k++)
if (ch == (int) chmap->pos[k]) {
found = 1;
break;
}
if (found)
continue;
if (chmap->channels >= MAX_CHMAP_CHANNELS) {
SNDERR("Too many channels in ttable chmap");
goto err;
}
chmap->pos[chmap->channels++] = ch;
}
- }
- *tt_chmap = chmap; return 0;
+err:
- *tt_chmap = NULL;
- free(chmap);
- return -EINVAL;
+}
+static int find_matching_chmap(snd_pcm_t *spcm, snd_pcm_chmap_t *tt_chmap,
snd_pcm_chmap_t **found_chmap, int *schannels)
+{
- snd_pcm_chmap_query_t** chmaps = snd_pcm_query_chmaps(spcm);
- int i;
- *found_chmap = NULL;
- if (chmaps == NULL)
return 0; /* chmap API not supported for this slave */
- for (i = 0; chmaps[i]; i++) {
unsigned int j, k;
int match = 1;
snd_pcm_chmap_t *c = &chmaps[i]->map;
if (*schannels >= 0 && (int) c->channels != *schannels)
continue;
for (j = 0; j < tt_chmap->channels; j++) {
int found = 0;
unsigned int ch = tt_chmap->pos[j];
for (k = 0; k < c->channels; k++)
if (c->pos[k] == ch) {
found = 1;
break;
}
if (!found) {
match = 0;
break;
}
}
if (match) {
int size = sizeof(snd_pcm_chmap_t) + c->channels * sizeof(unsigned int);
*found_chmap = malloc(size);
NULL check is missing here.
memcpy(*found_chmap, c, size);
*schannels = c->channels;
break;
}
- }
- snd_pcm_free_chmaps(chmaps);
- if (*found_chmap == NULL) {
SNDERR("Found no matching channel map");
return -EINVAL;
- }
- return 0;
+}
+static int route_chmap_init(snd_pcm_t *pcm) +{
- int set_map = 0;
- snd_pcm_chmap_t *current;
- snd_pcm_route_t *route = pcm->private_data;
- if (!route->chmap)
return 0;
- if (snd_pcm_state(pcm) != SND_PCM_STATE_PREPARED)
return 0;
- current = snd_pcm_get_chmap(route->plug.gen.slave);
- if (!current)
return -ENOSYS;
- if (current->channels != route->chmap->channels)
set_map = 1;
- else set_map = memcmp(current->pos, route->chmap->pos, current->channels);
Please fix the indentation.
Takashi
This way, cards that support LFE on four channels (e g laptop with internal subwoofer) can do that, and other cards on a six channel setup can use that as well.
Well, note that there is still a reference to "pcm.surround51" left here. In practice, for HDA Intel sound cards this does not matter as both surround51 and surround40 reference the same definition. (And that's the only card I currently know of that actually does surround2.1 over four channels.)
Signed-off-by: David Henningsson david.henningsson@canonical.com --- src/conf/pcm/surround21.conf | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/src/conf/pcm/surround21.conf b/src/conf/pcm/surround21.conf index be29020..7f4676b 100644 --- a/src/conf/pcm/surround21.conf +++ b/src/conf/pcm/surround21.conf @@ -51,10 +51,9 @@ pcm.!surround21 { ] } } - slave.channels 6 - ttable.0.0 1 - ttable.1.1 1 - ttable.2.5 1 + ttable.0.FL 1 + ttable.1.FR 1 + ttable.2.LFE 1 hint { description "2.1 Surround output to Front and Subwoofer speakers" device $DEV
At Fri, 21 Feb 2014 16:24:19 +0100, David Henningsson wrote:
So, in order to support 2.1 surround on both 4-channels (e g FL FR LFE LFE, on internal subwoofer) and 6-channels (e g FL FR RL RR C LFE, on desktops with 5.1 out), I needed to make the route plugin more chmap aware.
This also included allowing a new syntax for the ttable, which I think is quite nice. The new syntax also falls back to ALSAs standard chmap in case the hardware does not support it.
The idea looks great, a nice improvement. Spotted a few trivial things I posted individually, but in general it's in a good shape.
thanks,
Takashi
David Henningsson (3): route: Allow chmap syntax for slave channels in ttable route: Select slave chmap based on ttable information conf: Allow 2.1 surround to use different number of channels
src/conf/pcm/surround21.conf | 7 +- src/pcm/pcm_route.c | 304 ++++++++++++++++++++++++++++++++++++++----- 2 files changed, 271 insertions(+), 40 deletions(-)
-- 1.9.0
participants (2)
-
David Henningsson
-
Takashi Iwai