[alsa-devel] [PATCH] hda: Add support for 92HD73xxx codecs
Added support for new family of IDT codecs.
--- Signed-off-by: Matthew Ranostay mranostay@embeddedalley.com
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a4f44a0..115cee6 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -349,7 +349,7 @@ static hda_nid_t stac92hd73xx_pin_nids[13] = {
static hda_nid_t stac92hd71bxx_pin_nids[10] = { 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, - 0x0f, 0x14, 0x18, 0x19, 0x1e, + 0x14, 0x18, 0x19, 0x1e, 0x0f };
static hda_nid_t stac927x_pin_nids[14] = { @@ -641,15 +641,21 @@ static struct hda_verb stac92hd71bxx_analog_core_init[] = { { 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, /* connect headphone jack to dac1 */ { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01}, - /* connect ports 0d and 0f to audio mixer */ - { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x2}, - { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x2}, - { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Speaker */ + /* connect port 0d to audio mixer */ + { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x02}, /* unmute dac0 input in audio mixer */ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x701f}, - /* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */ + /* unmute right and left channels for nodes 0x0a, 0x0d */ { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {} +}; + +static struct hda_verb stac92hd71bxx_enable_portf[] = { + /* connect port 0f to audio mixer */ + { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x02}, + { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Speaker */ + /* unmute right and left channels for nodes 0x0f */ { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {} }; @@ -1313,20 +1319,20 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
static unsigned int ref92hd71bxx_pin_configs[10] = { 0x02214030, 0x02a19040, 0x01a19020, 0x01014010, - 0x0181302e, 0x01114010, 0x01019020, 0x90a000f0, - 0x90a000f0, 0x01452050, + 0x0181302e, 0x01019020, 0x90a000f0, 0x90a000f0, + 0x01452050, 0x01114010, };
-static unsigned int dell_m4_1_pin_configs[13] = { +static unsigned int dell_m4_1_pin_configs[10] = { 0x0421101f, 0x04a11221, 0x40f000f0, 0x90170110, - 0x23a1902e, 0x23014250, 0x40f000f0, 0x90a000f0, - 0x40f000f0, 0x4f0000f0, + 0x23a1902e, 0x40f000f0, 0x90a000f0, 0x40f000f0, + 0x4f0000f0, 0x23014250, };
-static unsigned int dell_m4_2_pin_configs[13] = { +static unsigned int dell_m4_2_pin_configs[10] = { 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110, - 0x23a1902e, 0x23014250, 0x40f000f0, 0x40f000f0, - 0x40f000f0, 0x044413b0, + 0x23a1902e, 0x40f000f0, 0x40f000f0, 0x40f000f0, + 0x044413b0, 0x23014250, };
static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = { @@ -2633,7 +2639,7 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec, 0, AC_VERB_GET_CONFIG_DEFAULT, 0); - if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE) + if (def_conf && (def_conf == AC_JACK_PORT_NONE)) continue;
nid = spec->dmic_nids[i]; @@ -3103,13 +3109,14 @@ static int stac92xx_init(struct hda_codec *codec) 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i], 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + def_conf = get_defcfg_connect(def_conf); /* outputs are only ports capable of power management * any attempts on powering down a input port cause the * referenced VREF to act quirky. */ if (pinctl & AC_PINCTL_IN_EN) continue; - if (get_defcfg_connect(def_conf) != AC_JACK_PORT_FIXED) + if (def_conf && def_conf != AC_JACK_PORT_FIXED) continue; enable_pin_detect(codec, spec->pwr_nids[i], event | i); codec->patch_ops.unsol_event(codec, (event | i) << 26); @@ -3614,12 +3621,39 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac92hd71bxx_pin_nids); + spec->num_pwrs = ARRAY_SIZE(stac92hd71bxx_pwr_nids); spec->pin_nids = stac92hd71bxx_pin_nids; spec->board_config = snd_hda_check_board_config(codec, STAC_92HD71BXX_MODELS, stac92hd71bxx_models, stac92hd71bxx_cfg_tbl); again: + switch (codec->vendor_id) { + case 0x111d76b6: /* 4 Port without Analog Mixer */ + case 0x111d76b7: + case 0x111d76b4: /* 6 Port without Analog Mixer */ + case 0x111d76b5: + spec->mixer = stac92hd71bxx_mixer; + spec->init = stac92hd71bxx_core_init; + break; + case 0x111d7603: /* 6 Port with Analog Mixer */ + case 0x111d7608: + /* no output amps */ + spec->num_pwrs = 0; + /* fallthru */ + default: + spec->mixer = stac92hd71bxx_analog_mixer; + spec->init = stac92hd71bxx_analog_core_init; + } + + if (codec->vendor_id != 0x111d7608) + snd_hda_sequence_write(codec, stac92hd71bxx_enable_portf); + else { + /* skip the VSW on port f */ + spec->num_pins--; + stac92xx_set_config_reg(codec, 0xf, 0x40f000f0); + } + if (spec->board_config < 0) { snd_printdd(KERN_INFO "hda_codec: Unknown model for" " STAC92HD71BXX, using BIOS defaults\n"); @@ -3634,19 +3668,6 @@ again: stac92xx_set_config_regs(codec); }
- switch (codec->vendor_id) { - case 0x111d76b6: /* 4 Port without Analog Mixer */ - case 0x111d76b7: - case 0x111d76b4: /* 6 Port without Analog Mixer */ - case 0x111d76b5: - spec->mixer = stac92hd71bxx_mixer; - spec->init = stac92hd71bxx_core_init; - break; - default: - spec->mixer = stac92hd71bxx_analog_mixer; - spec->init = stac92hd71bxx_analog_core_init; - } - spec->aloopback_mask = 0x20; spec->aloopback_shift = 0;
@@ -3666,7 +3687,6 @@ again: spec->num_dmics = STAC92HD71BXX_NUM_DMICS; spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
- spec->num_pwrs = ARRAY_SIZE(stac92hd71bxx_pwr_nids); spec->pwr_nids = stac92hd71bxx_pwr_nids;
spec->multiout.num_dacs = 1; @@ -4306,10 +4326,11 @@ struct hda_codec_preset snd_hda_preset_sigmatel[] = { { .id = 0x838476a5, .name = "STAC9255D", .patch = patch_stac9205 }, { .id = 0x838476a6, .name = "STAC9254", .patch = patch_stac9205 }, { .id = 0x838476a7, .name = "STAC9254D", .patch = patch_stac9205 }, + { .id = 0x111d7603, .name = "92HD75B3X5", .patch = patch_stac92hd71bxx}, + { .id = 0x111d7608, .name = "92HD75B2X5", .patch = patch_stac92hd71bxx}, { .id = 0x111d7674, .name = "92HD73D1X5", .patch = patch_stac92hd73xx }, { .id = 0x111d7675, .name = "92HD73C1X5", .patch = patch_stac92hd73xx }, { .id = 0x111d7676, .name = "92HD73E1X5", .patch = patch_stac92hd73xx }, - { .id = 0x111d7608, .name = "92HD71BXX", .patch = patch_stac92hd71bxx }, { .id = 0x111d76b0, .name = "92HD71B8X", .patch = patch_stac92hd71bxx }, { .id = 0x111d76b1, .name = "92HD71B8X", .patch = patch_stac92hd71bxx }, { .id = 0x111d76b2, .name = "92HD71B7X", .patch = patch_stac92hd71bxx },
At Thu, 12 Jun 2008 15:19:31 -0400, Matthew Ranostay wrote:
@@ -2633,7 +2639,7 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
if (def_conf && (def_conf == AC_JACK_PORT_NONE)) continue;
I guess the line def_conf = get_defcfg_connect(def_conf) is missing. But, still I don't see why to change to that.
@@ -3614,12 +3621,39 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
(snip)
- if (codec->vendor_id != 0x111d7608)
snd_hda_sequence_write(codec, stac92hd71bxx_enable_portf);
- else {
/* skip the VSW on port f */
spec->num_pins--;
stac92xx_set_config_reg(codec, 0xf, 0x40f000f0);
- }
These sequence wouldn't be executed in the resume. snd_hda_sequence_write() should be replaced with *_cache(). stac92xx_set_config_reg() is a bit problem...
thanks,
Takashi
Takashi Iwai wrote:
At Thu, 12 Jun 2008 15:19:31 -0400, Matthew Ranostay wrote:
@@ -2633,7 +2639,7 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
if (def_conf && (def_conf == AC_JACK_PORT_NONE)) continue;
I guess the line def_conf = get_defcfg_connect(def_conf) is missing. But, still I don't see why to change to that.
Ok I meant this for the power management block(see below). Any port that has a jack should be included (settings 0 and 3) in the power management by nid.
@@ -3614,12 +3621,39 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
(snip)
- if (codec->vendor_id != 0x111d7608)
snd_hda_sequence_write(codec, stac92hd71bxx_enable_portf);
- else {
/* skip the VSW on port f */
spec->num_pins--;
stac92xx_set_config_reg(codec, 0xf, 0x40f000f0);
- }
These sequence wouldn't be executed in the resume. snd_hda_sequence_write() should be replaced with *_cache(). stac92xx_set_config_reg() is a bit problem...
Ok I totally forgot about suspend/resume issues. I'm not sure if the method I have below is acceptable to ALSA coding standards, but I'm sure you'll let me know :).
thanks,
Takashi
Added support for new 92HD75xxx family of codecs.
--- Signed-off-by: Matthew Ranostay mranostay@embeddedalley.com
diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c index a4f44a0..4d19112 100644 --- a/pci/hda/patch_sigmatel.c +++ b/pci/hda/patch_sigmatel.c @@ -636,21 +636,28 @@ static struct hda_verb stac92hd71bxx_core_init[] = { { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, };
+#define HD_DISABLE_PORTF 3 static struct hda_verb stac92hd71bxx_analog_core_init[] = { + /* start of config #1 */ + + /* connect port 0f to audio mixer */ + { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x2}, + { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Speaker */ + /* unmute right and left channels for node 0x0f */ + { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + /* start of config #2 */ + /* set master volume and direct control */ { 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, /* connect headphone jack to dac1 */ { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01}, - /* connect ports 0d and 0f to audio mixer */ + /* connect port 0d to audio mixer */ { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x2}, - { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x2}, - { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Speaker */ /* unmute dac0 input in audio mixer */ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x701f}, - /* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */ + /* unmute right and left channels for nodes 0x0a, 0xd */ { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {} };
@@ -1317,13 +1324,13 @@ static unsigned int ref92hd71bxx_pin_configs[10] = { 0x90a000f0, 0x01452050, };
-static unsigned int dell_m4_1_pin_configs[13] = { +static unsigned int dell_m4_1_pin_configs[10] = { 0x0421101f, 0x04a11221, 0x40f000f0, 0x90170110, 0x23a1902e, 0x23014250, 0x40f000f0, 0x90a000f0, 0x40f000f0, 0x4f0000f0, };
-static unsigned int dell_m4_2_pin_configs[13] = { +static unsigned int dell_m4_2_pin_configs[10] = { 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110, 0x23a1902e, 0x23014250, 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x044413b0, @@ -3103,13 +3110,16 @@ static int stac92xx_init(struct hda_codec *codec) 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i], 0, AC_VERB_GET_CONFIG_DEFAULT, 0); + def_conf = get_defcfg_connect(def_conf); /* outputs are only ports capable of power management * any attempts on powering down a input port cause the * referenced VREF to act quirky. */ if (pinctl & AC_PINCTL_IN_EN) continue; - if (get_defcfg_connect(def_conf) != AC_JACK_PORT_FIXED) + /* skip any ports that don't have jacks since presence + * detection is useless */ + if (def_conf && def_conf != AC_JACK_PORT_FIXED) continue; enable_pin_detect(codec, spec->pwr_nids[i], event | i); codec->patch_ops.unsol_event(codec, (event | i) << 26); @@ -3614,6 +3624,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac92hd71bxx_pin_nids); + spec->num_pwrs = ARRAY_SIZE(stac92hd71bxx_pwr_nids); spec->pin_nids = stac92hd71bxx_pin_nids; spec->board_config = snd_hda_check_board_config(codec, STAC_92HD71BXX_MODELS, @@ -3642,6 +3653,19 @@ again: spec->mixer = stac92hd71bxx_mixer; spec->init = stac92hd71bxx_core_init; break; + case 0x111d7608: /* 5 Port with Analog Mixer */ + /* no output amps */ + spec->num_pwrs = 0; + spec->mixer = stac92hd71bxx_analog_mixer; + + /* disable VSW */ + spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF]; + stac92xx_set_config_reg(codec, 0xf, 0x40f000f0); + break; + case 0x111d7603: /* 6 Port with Analog Mixer */ + /* no output amps */ + spec->num_pwrs = 0; + /* fallthru */ default: spec->mixer = stac92hd71bxx_analog_mixer; spec->init = stac92hd71bxx_analog_core_init; @@ -3660,15 +3684,13 @@ again: spec->adc_nids = stac92hd71bxx_adc_nids; spec->dmic_nids = stac92hd71bxx_dmic_nids; spec->dmux_nids = stac92hd71bxx_dmux_nids; + spec->pwr_nids = stac92hd71bxx_pwr_nids;
spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids); spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids); spec->num_dmics = STAC92HD71BXX_NUM_DMICS; spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
- spec->num_pwrs = ARRAY_SIZE(stac92hd71bxx_pwr_nids); - spec->pwr_nids = stac92hd71bxx_pwr_nids; - spec->multiout.num_dacs = 1; spec->multiout.hp_nid = 0x11; spec->multiout.dac_nids = stac92hd71bxx_dac_nids; @@ -4306,10 +4328,11 @@ struct hda_codec_preset snd_hda_preset_sigmatel[] = { { .id = 0x838476a5, .name = "STAC9255D", .patch = patch_stac9205 }, { .id = 0x838476a6, .name = "STAC9254", .patch = patch_stac9205 }, { .id = 0x838476a7, .name = "STAC9254D", .patch = patch_stac9205 }, + { .id = 0x111d7603, .name = "92HD75B3X5", .patch = patch_stac92hd71bxx}, + { .id = 0x111d7608, .name = "92HD75B2X5", .patch = patch_stac92hd71bxx}, { .id = 0x111d7674, .name = "92HD73D1X5", .patch = patch_stac92hd73xx }, { .id = 0x111d7675, .name = "92HD73C1X5", .patch = patch_stac92hd73xx }, { .id = 0x111d7676, .name = "92HD73E1X5", .patch = patch_stac92hd73xx }, - { .id = 0x111d7608, .name = "92HD71BXX", .patch = patch_stac92hd71bxx }, { .id = 0x111d76b0, .name = "92HD71B8X", .patch = patch_stac92hd71bxx }, { .id = 0x111d76b1, .name = "92HD71B8X", .patch = patch_stac92hd71bxx }, { .id = 0x111d76b2, .name = "92HD71B7X", .patch = patch_stac92hd71bxx },
At Fri, 13 Jun 2008 10:16:45 -0400, Matthew Ranostay wrote:
Takashi Iwai wrote:
At Thu, 12 Jun 2008 15:19:31 -0400, Matthew Ranostay wrote:
@@ -2633,7 +2639,7 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
if (def_conf && (def_conf == AC_JACK_PORT_NONE)) continue;
I guess the line def_conf = get_defcfg_connect(def_conf) is missing. But, still I don't see why to change to that.
Ok I meant this for the power management block(see below). Any port that has a jack should be included (settings 0 and 3) in the power management by nid.
@@ -3614,12 +3621,39 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
(snip)
- if (codec->vendor_id != 0x111d7608)
snd_hda_sequence_write(codec, stac92hd71bxx_enable_portf);
- else {
/* skip the VSW on port f */
spec->num_pins--;
stac92xx_set_config_reg(codec, 0xf, 0x40f000f0);
- }
These sequence wouldn't be executed in the resume. snd_hda_sequence_write() should be replaced with *_cache(). stac92xx_set_config_reg() is a bit problem...
Ok I totally forgot about suspend/resume issues. I'm not sure if the method I have below is acceptable to ALSA coding standards, but I'm sure you'll let me know :).
This looks good to me. Thanks!
Takashi
participants (2)
-
Matthew Ranostay
-
Takashi Iwai