[PATCH v2 1/4] ASoC: codecs: wcd9335: Simplify with dev_err_probe
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
---
Changes in v2: 1. Re-write commit msg. --- sound/soc/codecs/wcd9335.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index d2548fdf9ae5..8bf3510a3ea3 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -5138,20 +5138,17 @@ static int wcd9335_irq_init(struct wcd9335_codec *wcd) * INTR2 is a subset of first interrupt sources MAD, VBAT, and SVA */ wcd->intr1 = of_irq_get_byname(wcd->dev->of_node, "intr1"); - if (wcd->intr1 < 0) { - if (wcd->intr1 != -EPROBE_DEFER) - dev_err(wcd->dev, "Unable to configure IRQ\n"); - - return wcd->intr1; - } + if (wcd->intr1 < 0) + return dev_err_probe(wcd->dev, wcd->intr1, + "Unable to configure IRQ\n");
ret = devm_regmap_add_irq_chip(wcd->dev, wcd->regmap, wcd->intr1, IRQF_TRIGGER_HIGH, 0, &wcd9335_regmap_irq1_chip, &wcd->irq_data); if (ret) - dev_err(wcd->dev, "Failed to register IRQ chip: %d\n", ret); + return dev_err_probe(wcd->dev, ret, "Failed to register IRQ chip\n");
- return ret; + return 0; }
static int wcd9335_slim_probe(struct slim_device *slim) @@ -5207,17 +5204,15 @@ static int wcd9335_slim_status(struct slim_device *sdev, slim_get_logical_addr(wcd->slim_ifc_dev);
wcd->regmap = regmap_init_slimbus(sdev, &wcd9335_regmap_config); - if (IS_ERR(wcd->regmap)) { - dev_err(dev, "Failed to allocate slim register map\n"); - return PTR_ERR(wcd->regmap); - } + if (IS_ERR(wcd->regmap)) + return dev_err_probe(dev, PTR_ERR(wcd->regmap), + "Failed to allocate slim register map\n");
wcd->if_regmap = regmap_init_slimbus(wcd->slim_ifc_dev, &wcd9335_ifc_regmap_config); - if (IS_ERR(wcd->if_regmap)) { - dev_err(dev, "Failed to allocate ifc register map\n"); - return PTR_ERR(wcd->if_regmap); - } + if (IS_ERR(wcd->if_regmap)) + return dev_err_probe(dev, PTR_ERR(wcd->if_regmap), + "Failed to allocate ifc register map\n");
ret = wcd9335_bring_up(wcd); if (ret) {
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
---
Changes in v2: 1. Re-write commit msg. --- sound/soc/codecs/wcd934x.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c index 783479a4d535..56487ad2f048 100644 --- a/sound/soc/codecs/wcd934x.c +++ b/sound/soc/codecs/wcd934x.c @@ -5868,10 +5868,9 @@ static int wcd934x_codec_parse_data(struct wcd934x_codec *wcd) slim_get_logical_addr(wcd->sidev); wcd->if_regmap = regmap_init_slimbus(wcd->sidev, &wcd934x_ifc_regmap_config); - if (IS_ERR(wcd->if_regmap)) { - dev_err(dev, "Failed to allocate ifc register map\n"); - return PTR_ERR(wcd->if_regmap); - } + if (IS_ERR(wcd->if_regmap)) + return dev_err_probe(dev, PTR_ERR(wcd->if_regmap), + "Failed to allocate ifc register map\n");
of_property_read_u32(dev->parent->of_node, "qcom,dmic-sample-rate", &wcd->dmic_sample_rate); @@ -5923,19 +5922,15 @@ static int wcd934x_codec_probe(struct platform_device *pdev) memcpy(wcd->tx_chs, wcd934x_tx_chs, sizeof(wcd934x_tx_chs));
irq = regmap_irq_get_virq(data->irq_data, WCD934X_IRQ_SLIMBUS); - if (irq < 0) { - dev_err(wcd->dev, "Failed to get SLIM IRQ\n"); - return irq; - } + if (irq < 0) + return dev_err_probe(wcd->dev, irq, "Failed to get SLIM IRQ\n");
ret = devm_request_threaded_irq(dev, irq, NULL, wcd934x_slim_irq_handler, IRQF_TRIGGER_RISING | IRQF_ONESHOT, "slim", wcd); - if (ret) { - dev_err(dev, "Failed to request slimbus irq\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to request slimbus irq\n");
wcd934x_register_mclk_output(wcd); platform_set_drvdata(pdev, wcd);
The probe already stores pointer to &pdev->dev, so use it to make the code a bit easier to read.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
---
Changes in v2: 1. None. --- sound/soc/codecs/wcd934x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c index 56487ad2f048..c0d1fa36d841 100644 --- a/sound/soc/codecs/wcd934x.c +++ b/sound/soc/codecs/wcd934x.c @@ -5892,12 +5892,12 @@ static int wcd934x_codec_parse_data(struct wcd934x_codec *wcd)
static int wcd934x_codec_probe(struct platform_device *pdev) { - struct wcd934x_ddata *data = dev_get_drvdata(pdev->dev.parent); - struct wcd934x_codec *wcd; struct device *dev = &pdev->dev; + struct wcd934x_ddata *data = dev_get_drvdata(dev->parent); + struct wcd934x_codec *wcd; int ret, irq;
- wcd = devm_kzalloc(&pdev->dev, sizeof(*wcd), GFP_KERNEL); + wcd = devm_kzalloc(dev, sizeof(*wcd), GFP_KERNEL); if (!wcd) return -ENOMEM;
Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
---
Changes in v2: 1. Re-write commit msg. --- sound/soc/codecs/wcd938x.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c index f033f79ed238..11b264a63b04 100644 --- a/sound/soc/codecs/wcd938x.c +++ b/sound/soc/codecs/wcd938x.c @@ -4235,18 +4235,15 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device int ret;
wcd938x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0); - if (wcd938x->reset_gpio < 0) { - dev_err(dev, "Failed to get reset gpio: err = %d\n", - wcd938x->reset_gpio); - return wcd938x->reset_gpio; - } + if (wcd938x->reset_gpio < 0) + return dev_err_probe(dev, wcd938x->reset_gpio, + "Failed to get reset gpio\n");
wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro", GPIOD_OUT_LOW); - if (IS_ERR(wcd938x->us_euro_gpio)) { - dev_err(dev, "us-euro swap Control GPIO not found\n"); - return PTR_ERR(wcd938x->us_euro_gpio); - } + if (IS_ERR(wcd938x->us_euro_gpio)) + return dev_err_probe(dev, PTR_ERR(wcd938x->us_euro_gpio), + "us-euro swap Control GPIO not found\n");
cfg->swap_gnd_mic = wcd938x_swap_gnd_mic;
@@ -4256,16 +4253,12 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device wcd938x->supplies[3].supply = "vdd-mic-bias";
ret = regulator_bulk_get(dev, WCD938X_MAX_SUPPLY, wcd938x->supplies); - if (ret) { - dev_err(dev, "Failed to get supplies: err = %d\n", ret); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to get supplies\n");
ret = regulator_bulk_enable(WCD938X_MAX_SUPPLY, wcd938x->supplies); - if (ret) { - dev_err(dev, "Failed to enable supplies: err = %d\n", ret); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to enable supplies\n");
wcd938x_dt_parse_micbias_info(dev, wcd938x);
On Tue, Apr 18, 2023 at 09:46:27AM +0200, Krzysztof Kozlowski wrote:
Replace dev_err() in probe() path with dev_err_probe() to:
- Make code a bit simpler and easier to read,
- Do not print messages on deferred probe.
*/wcd->intr1 = of_irq_get_byname(wcd->dev->of_node, "intr1");
- if (wcd->intr1 < 0) {
if (wcd->intr1 != -EPROBE_DEFER)dev_err(wcd->dev, "Unable to configure IRQ\n");return wcd->intr1;
This is already not printing a message on deferred probe.
On 18/04/2023 14:55, Mark Brown wrote:
On Tue, Apr 18, 2023 at 09:46:27AM +0200, Krzysztof Kozlowski wrote:
Replace dev_err() in probe() path with dev_err_probe() to:
- Make code a bit simpler and easier to read,
- Do not print messages on deferred probe.
*/wcd->intr1 = of_irq_get_byname(wcd->dev->of_node, "intr1");
- if (wcd->intr1 < 0) {
if (wcd->intr1 != -EPROBE_DEFER)dev_err(wcd->dev, "Unable to configure IRQ\n");return wcd->intr1;This is already not printing a message on deferred probe.
True, but the other places in the patch don't have such condition.
Best regards, Krzysztof
On Tue, 18 Apr 2023 09:46:27 +0200, Krzysztof Kozlowski wrote:
Replace dev_err() in probe() path with dev_err_probe() to:
- Make code a bit simpler and easier to read,
- Do not print messages on deferred probe.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[2/4] ASoC: codecs: wcd934x: Simplify with dev_err_probe commit: fa92f4294283cc7d1f29151420be9e9336182518 [3/4] ASoC: codecs: wcd934x: Simplify &pdev->dev in probe commit: 92864de45c3e445419d1e99e3a409469a5f3ef57 [4/4] ASoC: codecs: wcd938x: Simplify with dev_err_probe commit: 60ba2fda5280528e70fa26b44e36d1530f6d1d7e
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Krzysztof Kozlowski -
Mark Brown