[alsa-devel] [PATCH 0/7] ASoC: Intel: Introduce tokens for CNL

newer
[alsa-devel] [PATCH v3] ASoC: Add...

older
[alsa-devel] [PATCH v2 0/7] ASoC:...

Guneshwor Singh

21 Aug 2017 21 Aug '17

10:46 a.m.

This series introduces topology changes for CNL platform. Cannonlake DSP supports various formats, rates and channels for each module. To represent the buffer size, cycles per second and required memory page per format/channel/rate per module, common module data are abstracted out and are now part of the topology manifest. This is necessary for pipelines which involve algo modules as they required floating point calculations.

With the addition of manifest tokens, buffer size, formats and page required by dsp modules can be pre-calculated and populate in the conf manifest instead of computing them in the driver.

This change is backward compatible with the existing model.

Jeeja KP (1): ASoC: Intel: Skylake: Update module id in pin connections

Ramesh Babu (1): ASoC: Intel: Skylake: Parse and update module config structure

Shreyas NC (5): ASoC: Intel: Skylake: Parse multiple manifest data blocks ASoC: Intel: uapi: Add new tokens for module common data ASoC: Intel: Skylake: Commonize parsing of format tokens ASoC: Intel: Skylake: Add driver structures to be filled from topology manifest ASoC: Intel: Skylake: Populate module data from topology manifest

include/uapi/sound/snd_sst_tokens.h | 96 ++++- sound/soc/intel/skylake/skl-messages.c | 59 ++- sound/soc/intel/skylake/skl-pcm.c | 44 +- sound/soc/intel/skylake/skl-topology.c | 718 ++++++++++++++++++++++++++++----- sound/soc/intel/skylake/skl-topology.h | 79 ++++ sound/soc/intel/skylake/skl.h | 2 + 6 files changed, 871 insertions(+), 127 deletions(-)

-- 2.14.1

Show replies by date

Guneshwor Singh

21 Aug 21 Aug

10:46 a.m.

New subject: [alsa-devel] [PATCH 1/7] ASoC: Intel: Skylake: Parse multiple manifest data blocks

From: Shreyas NC shreyas.nc@intel.com

Currently we can parse a single manifest data block. But manifest private data can have multiple data blocks.

So, fix the parsing logic to parse multiple data blocks by returning offset of each parsed data block.

Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com --- sound/soc/intel/skylake/skl-topology.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 350d2387f737..f14b373f65d7 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -2721,14 +2721,12 @@ static int skl_tplg_get_manifest_tkn(struct device *dev,

tkn_count = tkn_count + ret; tkn_elem++; - tuple_size += tkn_count * - sizeof(struct snd_soc_tplg_vendor_value_elem); - break; } + tuple_size += (tkn_count * sizeof(*tkn_elem)); tkn_count = 0; }

- return 0; + return off; }

/* @@ -2751,11 +2749,10 @@ static int skl_tplg_get_manifest_data(struct snd_soc_tplg_manifest *manifest, num_blocks = ret;

off += array->size; - array = (struct snd_soc_tplg_vendor_array *) - (manifest->priv.data + off); - /* Read the BLOCK_TYPE and BLOCK_SIZE descriptor */ while (num_blocks > 0) { + array = (struct snd_soc_tplg_vendor_array *) + (manifest->priv.data + off); ret = skl_tplg_get_desc_blocks(dev, array);

if (ret < 0) @@ -2789,6 +2786,7 @@ static int skl_tplg_get_manifest_data(struct snd_soc_tplg_manifest *manifest, } else { return -EINVAL; } + off += ret; }

return 0;

-- 2.14.1

Mark Brown

27 Aug 27 Aug

3:39 p.m.

New subject: [alsa-devel] Applied "ASoC: Intel: Skylake: Parse multiple manifest data blocks" to the asoc tree

The patch

ASoC: Intel: Skylake: Parse multiple manifest data blocks

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

...

From 9fc129f6e5de01ce5fccf033485e40dfa429b45c Mon Sep 17 00:00:00 2001

From: Shreyas NC shreyas.nc@intel.com Date: Wed, 23 Aug 2017 19:33:48 +0530 Subject: [PATCH] ASoC: Intel: Skylake: Parse multiple manifest data blocks

Currently we can parse a single manifest data block. But manifest private data can have multiple data blocks.

So, fix the parsing logic to parse multiple data blocks by returning offset of each parsed data block.

Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com Acked-By: Vinod Koul vinod.koul@intel.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/intel/skylake/skl-topology.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)

tkn_count = tkn_count + ret; tkn_elem++; - tuple_size += tkn_count * - sizeof(struct snd_soc_tplg_vendor_value_elem); - break; } + tuple_size += (tkn_count * sizeof(*tkn_elem)); tkn_count = 0; }

- return 0; + return off; }

/* @@ -2751,11 +2749,10 @@ static int skl_tplg_get_manifest_data(struct snd_soc_tplg_manifest *manifest, num_blocks = ret;

if (ret < 0) @@ -2789,6 +2786,7 @@ static int skl_tplg_get_manifest_data(struct snd_soc_tplg_manifest *manifest, } else { return -EINVAL; } + off += ret; }

return 0;

-- 2.13.2

Guneshwor Singh

21 Aug 21 Aug

10:46 a.m.

New subject: [alsa-devel] [PATCH 2/7] ASoC: Intel: uapi: Add new tokens for module common data

From: Shreyas NC shreyas.nc@intel.com

The module private data can be modelled independent of its instances so that it can be reused by the module instances. So move module data to common manifest which can be referenced by the module instances.

This requires new tokens to be defined to accommodate these changes. The new tokens will specify buffer sizes, DSP cycles and respective indexes corresponding to the pcm params in the topology manifest so that driver need not compute them.

Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com --- include/uapi/sound/snd_sst_tokens.h | 96 ++++++++++++++++++++++++++++++++++++- 1 file changed, 95 insertions(+), 1 deletion(-)

diff --git a/include/uapi/sound/snd_sst_tokens.h b/include/uapi/sound/snd_sst_tokens.h index dedb2056160d..7b294d9c32cf 100644 --- a/include/uapi/sound/snd_sst_tokens.h +++ b/include/uapi/sound/snd_sst_tokens.h @@ -163,8 +163,74 @@ * * %SKL_TKN_U32_DMA_BUF_SIZE: DMA buffer size in millisec * + * %SKL_TKN_U32_PIPE_DIR: Specifies pipe direction. Can be + * playback/capture. + * + * %SKL_TKN_U32_NUM_CONFIGS: Number of pipe configs + * + * %SKL_TKN_U32_PATH_MEM_PGS: Size of memory (in pages) required for pipeline + * and its data + * + * %SKL_TKN_U32_PIPE_CONFIG_ID: Config id for the modules in the pipe + * and PCM params supported by that pipe + * config. This is used as index to fill + * up the pipe config and module config + * structure. + * + * %SKL_TKN_U32_CFG_FREQ: + * %SKL_TKN_U8_CFG_CHAN: + * %SKL_TKN_U8_CFG_BPS: PCM params (freq, channels, bits per sample) + * supported for each of the pipe configs. + * + * %SKL_TKN_CFG_MOD_RES_ID: Module's resource index for each of the + * pipe config + * + * %SKL_TKN_CFG_MOD_FMT_ID: Module's interface index for each of the + * pipe config + * + * %SKL_TKN_U8_NUM_MOD: Number of modules in the manifest + * + * %SKL_TKN_MM_U8_MOD_IDX: Current index of the module in the manifest + * + * %SKL_TKN_MM_U8_MAX_INST_COUNT: + * Max allowed instance count for modules + * + * %SKL_TKN_MM_U8_NUM_RES: Number of resources for the module + * + * %SKL_TKN_MM_U8_NUM_INTF: Number of interfaces for the module + * + * %SKL_TKN_MM_U32_RES_ID: Resource index for the resource info to + * be filled into. + * A module can support multiple resource + * configuration and is represnted as a + * resource table. This index is used to + * fill information into appropriate index. + * + * %SKL_TKN_MM_U32_CPS: DSP cycles per second + * + * %SKL_TKN_MM_U32_DMA_SIZE: Allocated buffer size for gateway DMA + * + * %SKL_TKN_MM_U32_CPC: DSP cycles allocated per frame + * + * %SKL_TKN_MM_U32_RES_PIN_ID: Resource pin index in the module + * + * %SKL_TKN_MM_U32_INTF_PIN_ID: Interface index in the module + * + * %SKL_TKN_MM_U32_PIN_BUF: Buffer size of the module pin + * + * %SKL_TKN_MM_U32_FMT_ID: Format index for each of the interface/ + * format information to be filled into. + * + * %SKL_TKN_MM_U32_NUM_IN_FMT: Number of input formats + * %SKL_TKN_MM_U32_NUM_OUT_FMT: Number of output formats + * * module_id and loadable flags dont have tokens as these values will be * read from the DSP FW manifest + * + * Tokens defined can be used either in the manifest or widget private data. + * + * SKL_TKN_MM is used as a suffix for all tokens that represent + * module data in the manifest. */ enum SKL_TKNS { SKL_TKN_UUID = 1, @@ -218,7 +284,35 @@ enum SKL_TKNS { SKL_TKL_U32_D0I3_CAPS, /* Typo added at v4.10 */ SKL_TKN_U32_D0I3_CAPS = SKL_TKL_U32_D0I3_CAPS, SKL_TKN_U32_DMA_BUF_SIZE, - SKL_TKN_MAX = SKL_TKN_U32_DMA_BUF_SIZE, + + SKL_TKN_U32_PIPE_DIRECTION, + SKL_TKN_U32_PIPE_CONFIG_ID, + SKL_TKN_U32_NUM_CONFIGS, + SKL_TKN_U32_PATH_MEM_PGS, + + SKL_TKN_U32_CFG_FREQ, + SKL_TKN_U8_CFG_CHAN, + SKL_TKN_U8_CFG_BPS, + SKL_TKN_CFG_MOD_RES_ID, + SKL_TKN_CFG_MOD_FMT_ID, + SKL_TKN_U8_NUM_MOD, + + SKL_TKN_MM_U8_MOD_IDX, + SKL_TKN_MM_U8_MAX_INST_COUNT, + SKL_TKN_MM_U8_NUM_RES, + SKL_TKN_MM_U8_NUM_INTF, + SKL_TKN_MM_U32_RES_ID, + SKL_TKN_MM_U32_CPS, + SKL_TKN_MM_U32_DMA_SIZE, + SKL_TKN_MM_U32_CPC, + SKL_TKN_MM_U32_RES_PIN_ID, + SKL_TKN_MM_U32_INTF_PIN_ID, + SKL_TKN_MM_U32_PIN_BUF, + SKL_TKN_MM_U32_FMT_ID, + SKL_TKN_MM_U32_NUM_IN_FMT, + SKL_TKN_MM_U32_NUM_OUT_FMT, + + SKL_TKN_MAX = SKL_TKN_MM_U32_NUM_OUT_FMT, };

#endif

-- 2.14.1

Guneshwor Singh

10:46 a.m.

New subject: [alsa-devel] [PATCH 3/7] ASoC: Intel: Skylake: Commonize parsing of format tokens

From: Shreyas NC shreyas.nc@intel.com

Format resource tokens can be a part of either the widget or manifest private data. In the current model, format resources come as a part of widget private data and they come as a part of topology manifest in the newly introduced model.

So add a common function that can fill up either of the structures.

Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com --- sound/soc/intel/skylake/skl-topology.c | 47 +++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 21 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index f14b373f65d7..df808fbf14b5 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1948,27 +1948,9 @@ static int skl_tplg_fill_pins_info(struct device *dev, * on the direction */ static int skl_tplg_fill_fmt(struct device *dev, - struct skl_module_cfg *mconfig, u32 tkn, - u32 value, u32 dir, u32 pin_count) + struct skl_module_fmt *dst_fmt, + u32 tkn, u32 value) { - struct skl_module_fmt *dst_fmt; - - switch (dir) { - case SKL_DIR_IN: - dst_fmt = mconfig->in_fmt; - dst_fmt += pin_count; - break; - - case SKL_DIR_OUT: - dst_fmt = mconfig->out_fmt; - dst_fmt += pin_count; - break; - - default: - dev_err(dev, "Invalid direction value\n"); - return -EINVAL; - } - switch (tkn) { case SKL_TKN_U32_FMT_CH: dst_fmt->channels = value; @@ -2010,6 +1992,29 @@ static int skl_tplg_fill_fmt(struct device *dev, return 0; }

+static int skl_tplg_widget_fill_fmt(struct device *dev, + struct skl_module_cfg *mconfig, + u32 tkn, u32 val, u32 dir, int fmt_idx) +{ + struct skl_module_fmt *dst_fmt; + + switch (dir) { + case SKL_DIR_IN: + dst_fmt = &mconfig->in_fmt[fmt_idx]; + break; + + case SKL_DIR_OUT: + dst_fmt = &mconfig->out_fmt[fmt_idx]; + break; + + default: + dev_err(dev, "Invalid direction: %d\n", dir); + return -EINVAL; + } + + return skl_tplg_fill_fmt(dev, dst_fmt, tkn, val); +} + static int skl_tplg_get_uuid(struct device *dev, struct skl_module_cfg *mconfig, struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn) { @@ -2190,7 +2195,7 @@ static int skl_tplg_get_token(struct device *dev, case SKL_TKN_U32_FMT_INTERLEAVE: case SKL_TKN_U32_FMT_SAMPLE_TYPE: case SKL_TKN_U32_FMT_CH_MAP: - ret = skl_tplg_fill_fmt(dev, mconfig, tkn_elem->token, + ret = skl_tplg_widget_fill_fmt(dev, mconfig, tkn_elem->token, tkn_elem->value, dir, pin_index);

if (ret < 0)

-- 2.14.1

Mark Brown

27 Aug 27 Aug

3:38 p.m.

New subject: [alsa-devel] Applied "ASoC: Intel: Skylake: Commonize parsing of format tokens" to the asoc tree

The patch

ASoC: Intel: Skylake: Commonize parsing of format tokens

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

...

From ca312fda690e94c704bcb0e21b73b5d5bd1cf1ff Mon Sep 17 00:00:00 2001

From: Shreyas NC shreyas.nc@intel.com Date: Wed, 23 Aug 2017 19:33:50 +0530 Subject: [PATCH] ASoC: Intel: Skylake: Commonize parsing of format tokens

So add a common function that can fill up either of the structures.

Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com Acked-By: Vinod Koul vinod.koul@intel.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/intel/skylake/skl-topology.c | 47 +++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 21 deletions(-)

if (ret < 0)

-- 2.13.2

Guneshwor Singh

21 Aug 21 Aug

10:46 a.m.

New subject: [alsa-devel] [PATCH 4/7] ASoC: Intel: Skylake: Add driver structures to be filled from topology manifest

From: Shreyas NC shreyas.nc@intel.com

The topology manifest would include module common data including resource and interface table. The resource table consists of resources required by the dsp module such as buffer size, cycles per second, number of input/output pins. And, the interface table consists of pcm parameters per module which can be referenced later.

So define the structures accordingly to represent topology manifest data in the driver.

Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com --- sound/soc/intel/skylake/skl-topology.h | 53 ++++++++++++++++++++++++++++++++++ sound/soc/intel/skylake/skl.h | 2 ++ 2 files changed, 55 insertions(+)

diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index f30e381ff1c8..9324f5eec69f 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -44,6 +44,13 @@ #define SKL_DEFAULT_MIC_SEL_GAIN 0x3FF #define SKL_MIC_SEL_SWITCH 0x3

+#define SKL_OUTPUT_PIN 0 +#define SKL_INPUT_PIN 1 +#define SKL_MAX_PATH_CONFIGS 8 +#define SKL_MAX_MODULES_IN_PIPE 8 +#define SKL_MAX_MODULE_FORMATS 32 +#define SKL_MAX_MODULE_RESOURCES 32 + enum skl_channel_index { SKL_CHANNEL_LEFT = 0, SKL_CHANNEL_RIGHT = 1, @@ -293,6 +300,52 @@ enum d0i3_capability { SKL_D0I3_NON_STREAMING = 2, };

+struct skl_module_pin_fmt { + u8 id; + struct skl_module_fmt fmt; +}; + +struct skl_module_iface { + u8 fmt_idx; + u8 nr_in_fmt; + u8 nr_out_fmt; + struct skl_module_pin_fmt inputs[MAX_IN_QUEUE]; + struct skl_module_pin_fmt outputs[MAX_OUT_QUEUE]; +}; + +struct skl_module_pin_resources { + u8 pin_index; + u32 buf_size; +}; + +struct skl_module_res { + u8 id; + u32 is_pages; + u32 cps; + u32 ibs; + u32 obs; + u32 dma_buffer_size; + u32 cpc; + u8 nr_input_pins; + u8 nr_output_pins; + struct skl_module_pin_resources input[MAX_IN_QUEUE]; + struct skl_module_pin_resources output[MAX_OUT_QUEUE]; +}; + +struct skl_module { + uuid_le uuid; + u8 loadable; + u8 input_pin_type; + u8 output_pin_type; + u8 max_input_pins; + u8 max_output_pins; + u8 max_instance_count; + u8 nr_resources; + u8 nr_interfaces; + struct skl_module_res resources[SKL_MAX_MODULE_RESOURCES]; + struct skl_module_iface formats[SKL_MAX_MODULE_FORMATS]; +}; + struct skl_module_cfg { u8 guid[16]; struct skl_module_inst_id id; diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index 20017ee4685c..8d9d6899f761 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -71,6 +71,8 @@ struct skl { struct work_struct probe_work;

struct skl_debug *debugfs; + u8 nr_modules; + struct skl_module **modules; };

#define skl_to_ebus(s) (&(s)->ebus)

-- 2.14.1

Guneshwor Singh

10:46 a.m.

New subject: [alsa-devel] [PATCH 5/7] ASoC: Intel: Skylake: Populate module data from topology manifest

From: Shreyas NC shreyas.nc@intel.com

All the module common data will now be populated in the topology manifest. This includes the resource and interface list supported by the module. With this, driver need not compute the resources required by each dsp module for a particular pcm parameter since it comes as a part of the topology manifest.

So, add functions to parse the manifest tokens to populate the module config data structure.

Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com --- sound/soc/intel/skylake/skl-topology.c | 325 ++++++++++++++++++++++++++++++++- 1 file changed, 321 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index df808fbf14b5..b562d9f7e7b5 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -2037,6 +2037,104 @@ static void skl_tplg_fill_pin_dynamic_val( mpin[i].is_dynamic = value; }

+/* + * Resource table in the manifest has pin specific resources + * like pin and pin buffer size + */ +static int skl_tplg_manifest_pin_res_tkn(struct device *dev, + struct snd_soc_tplg_vendor_value_elem *tkn_elem, + struct skl_module_res *res, int pin_idx, int dir) +{ + struct skl_module_pin_resources *m_pin; + + switch (dir) { + case SKL_DIR_IN: + m_pin = &res->input[pin_idx]; + break; + + case SKL_DIR_OUT: + m_pin = &res->output[pin_idx]; + break; + + default: + dev_err(dev, "Invalid pin direction: %d\n", dir); + return -EINVAL; + } + + switch (tkn_elem->token) { + case SKL_TKN_MM_U32_RES_PIN_ID: + m_pin->pin_index = tkn_elem->value; + break; + + case SKL_TKN_MM_U32_PIN_BUF: + m_pin->buf_size = tkn_elem->value; + break; + + default: + dev_err(dev, "Invalid token: %d\n", tkn_elem->token); + return -EINVAL; + } + + return 0; +} + +/* + * Fill module specific resources from the manifest's resource + * table like CPS, DMA size, mem_pages. + */ +static int skl_tplg_fill_res_tkn(struct device *dev, + struct snd_soc_tplg_vendor_value_elem *tkn_elem, + struct skl_module_res *res, + int pin_idx, int dir) +{ + int ret, tkn_count = 0; + + if (!res) + return -EINVAL; + + switch (tkn_elem->token) { + case SKL_TKN_MM_U32_CPS: + res->cps = tkn_elem->value; + break; + + case SKL_TKN_MM_U32_DMA_SIZE: + res->dma_buffer_size = tkn_elem->value; + break; + + case SKL_TKN_MM_U32_CPC: + res->cpc = tkn_elem->value; + break; + + case SKL_TKN_U32_MEM_PAGES: + res->is_pages = tkn_elem->value; + break; + + case SKL_TKN_U32_OBS: + res->obs = tkn_elem->value; + break; + + case SKL_TKN_U32_IBS: + res->ibs = tkn_elem->value; + break; + + case SKL_TKN_MM_U32_RES_PIN_ID: + case SKL_TKN_MM_U32_PIN_BUF: + ret = skl_tplg_manifest_pin_res_tkn(dev, tkn_elem, res, + pin_idx, dir); + if (ret < 0) + return ret; + break; + + default: + dev_err(dev, "Not a res type token: %d", tkn_elem->token); + return -EINVAL; + + } + tkn_count++; + + return tkn_count; +} + /* * Parse tokens to fill up the module private data */ @@ -2625,13 +2723,13 @@ static int skl_tplg_fill_str_mfest_tkn(struct device *dev, str_elem->string, ARRAY_SIZE(skl->skl_sst->lib_info[ref_count].name)); ref_count++; - tkn_count++; break;

default: dev_err(dev, "Not a string token %d\n", str_elem->token); break; } + tkn_count++;

return tkn_count; } @@ -2657,26 +2755,241 @@ static int skl_tplg_get_str_tkn(struct device *dev, return tkn_count; }

+static int skl_tplg_manifest_fill_fmt(struct device *dev, + struct skl_module_iface *fmt, + struct snd_soc_tplg_vendor_value_elem *tkn_elem, + u32 dir, int fmt_idx) +{ + struct skl_module_pin_fmt *dst_fmt; + struct skl_module_fmt *mod_fmt; + int ret; + + if (!fmt) + return -EINVAL; + + switch (dir) { + case SKL_DIR_IN: + dst_fmt = &fmt->inputs[fmt_idx]; + break; + + case SKL_DIR_OUT: + dst_fmt = &fmt->outputs[fmt_idx]; + break; + + default: + dev_err(dev, "Invalid direction: %d\n", dir); + return -EINVAL; + } + + mod_fmt = &dst_fmt->fmt; + + switch (tkn_elem->token) { + case SKL_TKN_MM_U32_INTF_PIN_ID: + dst_fmt->id = tkn_elem->value; + break; + + default: + ret = skl_tplg_fill_fmt(dev, mod_fmt, tkn_elem->token, + tkn_elem->value); + if (ret < 0) + return ret; + break; + } + + return 0; +} + +static int skl_tplg_fill_mod_info(struct device *dev, + struct snd_soc_tplg_vendor_value_elem *tkn_elem, + struct skl_module *mod) +{ + + if (!mod) + return -EINVAL; + + switch (tkn_elem->token) { + case SKL_TKN_U8_IN_PIN_TYPE: + mod->input_pin_type = tkn_elem->value; + break; + + case SKL_TKN_U8_OUT_PIN_TYPE: + mod->output_pin_type = tkn_elem->value; + break; + + case SKL_TKN_U8_IN_QUEUE_COUNT: + mod->max_input_pins = tkn_elem->value; + break; + + case SKL_TKN_U8_OUT_QUEUE_COUNT: + mod->max_output_pins = tkn_elem->value; + break; + + case SKL_TKN_MM_U8_MAX_INST_COUNT: + mod->max_instance_count = tkn_elem->value; + break; + + case SKL_TKN_MM_U8_NUM_RES: + mod->nr_resources = tkn_elem->value; + break; + + case SKL_TKN_MM_U8_NUM_INTF: + mod->nr_interfaces = tkn_elem->value; + break; + + default: + dev_err(dev, "Invalid mod info token %d", tkn_elem->token); + return -EINVAL; + } + + return 0; +} + + static int skl_tplg_get_int_tkn(struct device *dev, struct snd_soc_tplg_vendor_value_elem *tkn_elem, struct skl *skl) { - int tkn_count = 0; + int tkn_count = 0, ret; + static int mod_idx, res_val_idx, intf_val_idx, dir, pin_idx; + struct skl_module_res *res = NULL; + struct skl_module_iface *fmt = NULL; + struct skl_module *mod = NULL; + int i; + + if (skl->modules) { + mod = skl->modules[mod_idx]; + res = &mod->resources[res_val_idx]; + fmt = &mod->formats[intf_val_idx]; + }

switch (tkn_elem->token) { case SKL_TKN_U32_LIB_COUNT: skl->skl_sst->lib_count = tkn_elem->value; - tkn_count++; + break; + + case SKL_TKN_U8_NUM_MOD: + skl->nr_modules = tkn_elem->value; + skl->modules = devm_kcalloc(dev, skl->nr_modules, + sizeof(*skl->modules), GFP_KERNEL); + if (!skl->modules) + return -ENOMEM; + + for (i = 0; i < skl->nr_modules; i++) { + skl->modules[i] = devm_kzalloc(dev, + sizeof(struct skl_module), GFP_KERNEL); + if (!skl->modules[i]) + return -ENOMEM; + } + break; + + case SKL_TKN_MM_U8_MOD_IDX: + mod_idx = tkn_elem->value; + break; + + case SKL_TKN_U8_IN_PIN_TYPE: + case SKL_TKN_U8_OUT_PIN_TYPE: + case SKL_TKN_U8_IN_QUEUE_COUNT: + case SKL_TKN_U8_OUT_QUEUE_COUNT: + case SKL_TKN_MM_U8_MAX_INST_COUNT: + case SKL_TKN_MM_U8_NUM_RES: + case SKL_TKN_MM_U8_NUM_INTF: + ret = skl_tplg_fill_mod_info(dev, tkn_elem, mod); + if (ret < 0) + return ret; + break; + + case SKL_TKN_U32_DIR_PIN_COUNT: + dir = tkn_elem->value & SKL_IN_DIR_BIT_MASK; + pin_idx = (tkn_elem->value & SKL_PIN_COUNT_MASK) >> 4; + break; + + case SKL_TKN_MM_U32_RES_ID: + if (!res) + return -EINVAL; + + res->id = tkn_elem->value; + res_val_idx = tkn_elem->value; + break; + + case SKL_TKN_MM_U32_FMT_ID: + if (!fmt) + return -EINVAL; + + fmt->fmt_idx = tkn_elem->value; + intf_val_idx = tkn_elem->value; + break; + + case SKL_TKN_MM_U32_CPS: + case SKL_TKN_MM_U32_DMA_SIZE: + case SKL_TKN_MM_U32_CPC: + case SKL_TKN_U32_MEM_PAGES: + case SKL_TKN_U32_OBS: + case SKL_TKN_U32_IBS: + case SKL_TKN_MM_U32_RES_PIN_ID: + case SKL_TKN_MM_U32_PIN_BUF: + ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_idx, dir); + if (ret < 0) + return ret; + + break; + + case SKL_TKN_MM_U32_NUM_IN_FMT: + if (!fmt) + return -EINVAL; + + res->nr_input_pins = tkn_elem->value; + break; + + case SKL_TKN_MM_U32_NUM_OUT_FMT: + if (!fmt) + return -EINVAL; + + res->nr_output_pins = tkn_elem->value; + break; + + case SKL_TKN_U32_FMT_CH: + case SKL_TKN_U32_FMT_FREQ: + case SKL_TKN_U32_FMT_BIT_DEPTH: + case SKL_TKN_U32_FMT_SAMPLE_SIZE: + case SKL_TKN_U32_FMT_CH_CONFIG: + case SKL_TKN_U32_FMT_INTERLEAVE: + case SKL_TKN_U32_FMT_SAMPLE_TYPE: + case SKL_TKN_U32_FMT_CH_MAP: + case SKL_TKN_MM_U32_INTF_PIN_ID: + ret = skl_tplg_manifest_fill_fmt(dev, fmt, tkn_elem, + dir, pin_idx); + if (ret < 0) + return ret; break;

default: dev_err(dev, "Not a manifest token %d\n", tkn_elem->token); return -EINVAL; } + tkn_count++;

return tkn_count; }

+static int skl_tplg_get_manifest_uuid(struct device *dev, + struct skl *skl, + struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn) +{ + static int ref_count; + struct skl_module *mod; + + if (uuid_tkn->token == SKL_TKN_UUID) { + mod = skl->modules[ref_count]; + memcpy(&mod->uuid, &uuid_tkn->uuid, sizeof(uuid_tkn->uuid)); + ref_count++; + } else { + dev_err(dev, "Not an UUID token tkn %d\n", uuid_tkn->token); + return -EINVAL; + } + + return 0; +} + /* * Fill the manifest structure by parsing the tokens based on the * type. @@ -2709,7 +3022,11 @@ static int skl_tplg_get_manifest_tkn(struct device *dev, continue;

case SND_SOC_TPLG_TUPLE_TYPE_UUID: - dev_warn(dev, "no uuid tokens for skl tplf manifest\n"); + ret = skl_tplg_get_manifest_uuid(dev, skl, array->uuid); + if (ret < 0) + return ret; + + tuple_size += sizeof(*array->uuid); continue;

default:

-- 2.14.1

Guneshwor Singh

10:46 a.m.

New subject: [alsa-devel] [PATCH 6/7] ASoC: Intel: Skylake: Parse and update module config structure

From: Ramesh Babu ramesh.babu@intel.com

A dsp path and the modules in the path can support various pcm configurations. The list of supported pcm configurations from topology manifest would be stored and later selected runtime based on the hw pcm params. For legacy, module data is filled in the 0th index of resource and interface table.

To accommodate both models, change the relevant structures and populate them by parsing newly defined tokens. This change is backward compatible with the existing model where driver computes the resources required by each dsp module.

Signed-off-by: Ramesh Babu ramesh.babu@intel.com Signed-off-by: Shreyas NC shreyas.nc@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com --- sound/soc/intel/skylake/skl-messages.c | 59 ++++-- sound/soc/intel/skylake/skl-pcm.c | 3 +- sound/soc/intel/skylake/skl-topology.c | 342 +++++++++++++++++++++++++-------- sound/soc/intel/skylake/skl-topology.h | 25 +++ 4 files changed, 334 insertions(+), 95 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index cec7ced6780e..bd3ad65ca706 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -431,9 +431,12 @@ static void skl_set_base_module_format(struct skl_sst *ctx, struct skl_module_cfg *mconfig, struct skl_base_cfg *base_cfg) { - struct skl_module_fmt *format = &mconfig->in_fmt[0]; + struct skl_module *module = mconfig->module; + struct skl_module_res *res = &module->resources[mconfig->res_idx]; + struct skl_module_iface *fmt = &module->formats[mconfig->fmt_idx]; + struct skl_module_fmt *format = &fmt->inputs[0].fmt;

- base_cfg->audio_fmt.number_of_channels = (u8)format->channels; + base_cfg->audio_fmt.number_of_channels = format->channels;

base_cfg->audio_fmt.s_freq = format->s_freq; base_cfg->audio_fmt.bit_depth = format->bit_depth; @@ -448,10 +451,10 @@ static void skl_set_base_module_format(struct skl_sst *ctx,

base_cfg->audio_fmt.interleaving = format->interleaving_style;

- base_cfg->cps = mconfig->mcps; - base_cfg->ibs = mconfig->ibs; - base_cfg->obs = mconfig->obs; - base_cfg->is_pages = mconfig->mem_pages; + base_cfg->cps = res->cps; + base_cfg->ibs = res->ibs; + base_cfg->obs = res->obs; + base_cfg->is_pages = res->is_pages; }

/* @@ -539,6 +542,9 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx, struct skl_cpr_cfg *cpr_mconfig) { u32 dma_io_buf; + struct skl_module_res *res; + int res_idx = mconfig->res_idx; + struct skl *skl = get_skl_ctx(ctx->dev);

cpr_mconfig->gtw_cfg.node_id = skl_get_node_id(ctx, mconfig);

@@ -547,19 +553,27 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx, return; }

+ if (skl->nr_modules) { + res = &mconfig->module->resources[mconfig->res_idx]; + cpr_mconfig->gtw_cfg.dma_buffer_size = res->dma_buffer_size; + goto skip_buf_size_calc; + } else { + res = &mconfig->module->resources[res_idx]; + } + switch (mconfig->hw_conn_type) { case SKL_CONN_SOURCE: if (mconfig->dev_type == SKL_DEVICE_HDAHOST) - dma_io_buf = mconfig->ibs; + dma_io_buf = res->ibs; else - dma_io_buf = mconfig->obs; + dma_io_buf = res->obs; break;

case SKL_CONN_SINK: if (mconfig->dev_type == SKL_DEVICE_HDAHOST) - dma_io_buf = mconfig->obs; + dma_io_buf = res->obs; else - dma_io_buf = mconfig->ibs; + dma_io_buf = res->ibs; break;

default: @@ -574,11 +588,12 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx, /* fallback to 2ms default value */ if (!cpr_mconfig->gtw_cfg.dma_buffer_size) { if (mconfig->hw_conn_type == SKL_CONN_SOURCE) - cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->obs; + cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * res->obs; else - cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->ibs; + cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * res->ibs; }

+skip_buf_size_calc: cpr_mconfig->cpr_feature_mask = 0; cpr_mconfig->gtw_cfg.config_length = 0;

@@ -626,7 +641,9 @@ static void skl_setup_out_format(struct skl_sst *ctx, struct skl_module_cfg *mconfig, struct skl_audio_data_format *out_fmt) { - struct skl_module_fmt *format = &mconfig->out_fmt[0]; + struct skl_module *module = mconfig->module; + struct skl_module_iface *fmt = &module->formats[mconfig->fmt_idx]; + struct skl_module_fmt *format = &fmt->outputs[0].fmt;

out_fmt->number_of_channels = (u8)format->channels; out_fmt->s_freq = format->s_freq; @@ -651,7 +668,9 @@ static void skl_set_src_format(struct skl_sst *ctx, struct skl_module_cfg *mconfig, struct skl_src_module_cfg *src_mconfig) { - struct skl_module_fmt *fmt = &mconfig->out_fmt[0]; + struct skl_module *module = mconfig->module; + struct skl_module_iface *iface = &module->formats[mconfig->fmt_idx]; + struct skl_module_fmt *fmt = &iface->outputs[0].fmt;

skl_set_base_module_format(ctx, mconfig, (struct skl_base_cfg *)src_mconfig); @@ -668,7 +687,9 @@ static void skl_set_updown_mixer_format(struct skl_sst *ctx, struct skl_module_cfg *mconfig, struct skl_up_down_mixer_cfg *mixer_mconfig) { - struct skl_module_fmt *fmt = &mconfig->out_fmt[0]; + struct skl_module *module = mconfig->module; + struct skl_module_iface *iface = &module->formats[mconfig->fmt_idx]; + struct skl_module_fmt *fmt = &iface->outputs[0].fmt; int i = 0;

skl_set_base_module_format(ctx, mconfig, @@ -1002,8 +1023,8 @@ int skl_unbind_modules(struct skl_sst *ctx, struct skl_ipc_bind_unbind_msg msg; struct skl_module_inst_id src_id = src_mcfg->id; struct skl_module_inst_id dst_id = dst_mcfg->id; - int in_max = dst_mcfg->max_in_queue; - int out_max = src_mcfg->max_out_queue; + int in_max = dst_mcfg->module->max_input_pins; + int out_max = src_mcfg->module->max_output_pins; int src_index, dst_index, src_pin_state, dst_pin_state;

skl_dump_bind_info(ctx, src_mcfg, dst_mcfg); @@ -1064,8 +1085,8 @@ int skl_bind_modules(struct skl_sst *ctx, { int ret; struct skl_ipc_bind_unbind_msg msg; - int in_max = dst_mcfg->max_in_queue; - int out_max = src_mcfg->max_out_queue; + int in_max = dst_mcfg->module->max_input_pins; + int out_max = src_mcfg->module->max_output_pins; int src_index, dst_index;

skl_dump_bind_info(ctx, src_mcfg, dst_mcfg); diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index f6c9adb6faa2..a756882b9029 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1233,7 +1233,8 @@ static int skl_get_module_info(struct skl *skl, struct skl_module_cfg *mconfig) list_for_each_entry(module, &ctx->uuid_list, list) { if (uuid_le_cmp(*uuid_mod, module->uuid) == 0) { mconfig->id.module_id = module->id; - mconfig->is_loadable = module->is_loadable; + if (mconfig->module) + mconfig->module->loadable = module->is_loadable; return 0; } } diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index b562d9f7e7b5..8cf776508e95 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -49,6 +49,9 @@ static const int mic_quatro_list[][SKL_CH_QUATRO] = { {0, 1, 2, 3}, };

+#define CHECK_HW_PARAMS(ch, freq, bps, prm_ch, prm_freq, prm_bps) \ + ((ch == prm_ch) && (bps == prm_bps) && (freq == prm_freq)) + void skl_tplg_d0i3_get(struct skl *skl, enum d0i3_capability caps) { struct skl_d0i3_data *d0i3 = &skl->skl_sst->d0i3; @@ -153,8 +156,10 @@ static bool skl_is_pipe_mcps_avail(struct skl *skl, struct skl_module_cfg *mconfig) { struct skl_sst *ctx = skl->skl_sst; + u8 res_idx = mconfig->res_idx; + struct skl_module_res *res = &mconfig->module->resources[res_idx];

- if (skl->resource.mcps + mconfig->mcps > skl->resource.max_mcps) { + if (skl->resource.mcps + res->cps > skl->resource.max_mcps) { dev_err(ctx->dev, "%s: module_id %d instance %d\n", __func__, mconfig->id.module_id, mconfig->id.instance_id); @@ -170,7 +175,10 @@ static bool skl_is_pipe_mcps_avail(struct skl *skl, static void skl_tplg_alloc_pipe_mcps(struct skl *skl, struct skl_module_cfg *mconfig) { - skl->resource.mcps += mconfig->mcps; + u8 res_idx = mconfig->res_idx; + struct skl_module_res *res = &mconfig->module->resources[res_idx]; + + skl->resource.mcps += res->cps; }

/* @@ -179,7 +187,11 @@ static void skl_tplg_alloc_pipe_mcps(struct skl *skl, static void skl_tplg_free_pipe_mcps(struct skl *skl, struct skl_module_cfg *mconfig) { - skl->resource.mcps -= mconfig->mcps; + u8 res_idx = mconfig->res_idx; + struct skl_module_res *res = &mconfig->module->resources[res_idx]; + + res = &mconfig->module->resources[res_idx]; + skl->resource.mcps -= res->cps; }

/* @@ -195,17 +207,21 @@ skl_tplg_free_pipe_mem(struct skl *skl, struct skl_module_cfg *mconfig) static void skl_dump_mconfig(struct skl_sst *ctx, struct skl_module_cfg *mcfg) { + struct skl_module_iface *iface = &mcfg->module->formats[0]; + dev_dbg(ctx->dev, "Dumping config\n"); dev_dbg(ctx->dev, "Input Format:\n"); - dev_dbg(ctx->dev, "channels = %d\n", mcfg->in_fmt[0].channels); - dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->in_fmt[0].s_freq); - dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->in_fmt[0].ch_cfg); - dev_dbg(ctx->dev, "valid bit depth = %d\n", mcfg->in_fmt[0].valid_bit_depth); + dev_dbg(ctx->dev, "channels = %d\n", iface->inputs[0].fmt.channels); + dev_dbg(ctx->dev, "s_freq = %d\n", iface->inputs[0].fmt.s_freq); + dev_dbg(ctx->dev, "ch_cfg = %d\n", iface->inputs[0].fmt.ch_cfg); + dev_dbg(ctx->dev, "valid bit depth = %d\n", + iface->inputs[0].fmt.valid_bit_depth); dev_dbg(ctx->dev, "Output Format:\n"); - dev_dbg(ctx->dev, "channels = %d\n", mcfg->out_fmt[0].channels); - dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->out_fmt[0].s_freq); - dev_dbg(ctx->dev, "valid bit depth = %d\n", mcfg->out_fmt[0].valid_bit_depth); - dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->out_fmt[0].ch_cfg); + dev_dbg(ctx->dev, "channels = %d\n", iface->outputs[0].fmt.channels); + dev_dbg(ctx->dev, "s_freq = %d\n", iface->outputs[0].fmt.s_freq); + dev_dbg(ctx->dev, "valid bit depth = %d\n", + iface->outputs[0].fmt.valid_bit_depth); + dev_dbg(ctx->dev, "ch_cfg = %d\n", iface->outputs[0].fmt.ch_cfg); }

static void skl_tplg_update_chmap(struct skl_module_fmt *fmt, int chs) @@ -273,8 +289,8 @@ static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg, struct skl_module_fmt *in_fmt, *out_fmt;

/* Fixups will be applied to pin 0 only */ - in_fmt = &m_cfg->in_fmt[0]; - out_fmt = &m_cfg->out_fmt[0]; + in_fmt = &m_cfg->module->formats[0].inputs[0].fmt; + out_fmt = &m_cfg->module->formats[0].outputs[0].fmt;

if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { if (is_fe) { @@ -312,21 +328,23 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, { int multiplier = 1; struct skl_module_fmt *in_fmt, *out_fmt; + struct skl_module_res *res;

/* Since fixups is applied to pin 0 only, ibs, obs needs * change for pin 0 only */ - in_fmt = &mcfg->in_fmt[0]; - out_fmt = &mcfg->out_fmt[0]; + res = &mcfg->module->resources[0]; + in_fmt = &mcfg->module->formats[0].inputs[0].fmt; + out_fmt = &mcfg->module->formats[0].outputs[0].fmt;

if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) multiplier = 5;

- mcfg->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) * + res->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) * in_fmt->channels * (in_fmt->bit_depth >> 3) * multiplier;

- mcfg->obs = DIV_ROUND_UP(out_fmt->s_freq, 1000) * + res->obs = DIV_ROUND_UP(out_fmt->s_freq, 1000) * out_fmt->channels * (out_fmt->bit_depth >> 3) * multiplier; } @@ -365,6 +383,8 @@ static int skl_tplg_update_be_blob(struct snd_soc_dapm_widget *w, struct nhlt_specific_cfg *cfg; struct skl *skl = get_skl_ctx(ctx->dev); u8 dev_type = skl_tplg_be_dev_type(m_cfg->dev_type); + int fmt_idx = m_cfg->fmt_idx; + struct skl_module_iface *m_iface = &m_cfg->module->formats[fmt_idx];

/* check if we already have blob */ if (m_cfg->formats_config.caps_size > 0) @@ -375,23 +395,23 @@ static int skl_tplg_update_be_blob(struct snd_soc_dapm_widget *w, case SKL_DEVICE_DMIC: link_type = NHLT_LINK_DMIC; dir = SNDRV_PCM_STREAM_CAPTURE; - s_freq = m_cfg->in_fmt[0].s_freq; - s_fmt = m_cfg->in_fmt[0].bit_depth; - ch = m_cfg->in_fmt[0].channels; + s_freq = m_iface->inputs[0].fmt.s_freq; + s_fmt = m_iface->inputs[0].fmt.bit_depth; + ch = m_iface->inputs[0].fmt.channels; break;

case SKL_DEVICE_I2S: link_type = NHLT_LINK_SSP; if (m_cfg->hw_conn_type == SKL_CONN_SOURCE) { dir = SNDRV_PCM_STREAM_PLAYBACK; - s_freq = m_cfg->out_fmt[0].s_freq; - s_fmt = m_cfg->out_fmt[0].bit_depth; - ch = m_cfg->out_fmt[0].channels; + s_freq = m_iface->outputs[0].fmt.s_freq; + s_fmt = m_iface->outputs[0].fmt.bit_depth; + ch = m_iface->outputs[0].fmt.channels; } else { dir = SNDRV_PCM_STREAM_CAPTURE; - s_freq = m_cfg->in_fmt[0].s_freq; - s_fmt = m_cfg->in_fmt[0].bit_depth; - ch = m_cfg->in_fmt[0].channels; + s_freq = m_iface->inputs[0].fmt.s_freq; + s_fmt = m_iface->inputs[0].fmt.bit_depth; + ch = m_iface->inputs[0].fmt.channels; } break;

@@ -549,6 +569,7 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) struct snd_soc_dapm_widget *w; struct skl_module_cfg *mconfig; struct skl_sst *ctx = skl->skl_sst; + u8 cfg_idx; int ret = 0;

list_for_each_entry(w_module, &pipe->w_list, node) { @@ -564,11 +585,15 @@ skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe) return -EIO; }

+ cfg_idx = mconfig->pipe->cur_config_idx; + mconfig->fmt_idx = mconfig->mod_cfg[cfg_idx].fmt_idx; + mconfig->res_idx = mconfig->mod_cfg[cfg_idx].res_idx; + /* check resource available */ if (!skl_is_pipe_mcps_avail(skl, mconfig)) return -ENOMEM;

- if (mconfig->is_loadable && ctx->dsp->fw_ops.load_mod) { + if (mconfig->module->loadable && ctx->dsp->fw_ops.load_mod) { ret = ctx->dsp->fw_ops.load_mod(ctx->dsp, mconfig->id.module_id, mconfig->guid); if (ret < 0) @@ -633,7 +658,7 @@ static int skl_tplg_unload_pipe_modules(struct skl_sst *ctx, mconfig = w_module->w->priv; uuid_mod = (uuid_le *)mconfig->guid;

- if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod && + if (mconfig->module->loadable && ctx->dsp->fw_ops.unload_mod && mconfig->m_state > SKL_MODULE_UNINIT) { ret = ctx->dsp->fw_ops.unload_mod(ctx->dsp, mconfig->id.module_id); @@ -654,6 +679,65 @@ static int skl_tplg_unload_pipe_modules(struct skl_sst *ctx, return ret; }

+/* + * Here, we select pipe format based on the pipe type and pipe + * direction to determine the current config index for the pipeline. + * The config index is then used to select proper module resources. + * Intermediate pipes currently have a fixed format hence we select the + * 0th configuratation by default for such pipes. + */ +static int +skl_tplg_get_pipe_config(struct skl *skl, struct skl_module_cfg *mconfig) +{ + struct skl_sst *ctx = skl->skl_sst; + struct skl_pipe *pipe = mconfig->pipe; + struct skl_pipe_params *params = pipe->p_params; + struct skl_path_config *pconfig = &pipe->configs[0]; + struct skl_pipe_fmt *fmt = NULL; + bool in_fmt = false; + int i; + + if (pipe->nr_cfgs == 0) { + pipe->cur_config_idx = 0; + return 0; + } + + if (pipe->conn_type == SKL_PIPE_CONN_TYPE_NONE) { + dev_dbg(ctx->dev, "No conn_type detected, take 0th config\n"); + pipe->cur_config_idx = 0; + pipe->memory_pages = pconfig->mem_pages; + + return 0; + } + + if ((pipe->conn_type == SKL_PIPE_CONN_TYPE_FE && + pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) || + (pipe->conn_type == SKL_PIPE_CONN_TYPE_BE && + pipe->direction == SNDRV_PCM_STREAM_CAPTURE)) + in_fmt = true; + + for (i = 0; i < pipe->nr_cfgs; i++) { + pconfig = &pipe->configs[i]; + if (in_fmt) + fmt = &pconfig->in_fmt; + else + fmt = &pconfig->out_fmt; + + if (CHECK_HW_PARAMS(params->ch, params->s_freq, params->s_fmt, + fmt->channels, fmt->freq, fmt->bps)) { + pipe->cur_config_idx = i; + pipe->memory_pages = pconfig->mem_pages; + dev_dbg(ctx->dev, "Using pipe config: %d\n", i); + + return 0; + } + } + + dev_err(ctx->dev, "Invalid pipe config: %d %d %d for pipe: %d\n", + params->ch, params->s_freq, params->s_fmt, pipe->ppl_id); + return -EINVAL; +} + /* * Mixer module represents a pipeline. So in the Pre-PMU event of mixer we * need create the pipeline. So we do following: @@ -673,6 +757,10 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, struct skl_sst *ctx = skl->skl_sst; struct skl_module_deferred_bind *modules;

+ ret = skl_tplg_get_pipe_config(skl, mconfig); + if (ret < 0) + return ret; + /* check resource available */ if (!skl_is_pipe_mcps_avail(skl, mconfig)) return -EBUSY; @@ -776,12 +864,12 @@ static int skl_tplg_set_module_bind_params(struct snd_soc_dapm_widget *w, * check all out/in pins are in bind state. * if so set the module param */ - for (i = 0; i < mcfg->max_out_queue; i++) { + for (i = 0; i < mcfg->module->max_output_pins; i++) { if (mcfg->m_out_pin[i].pin_state != SKL_PIN_BIND_DONE) return 0; }

- for (i = 0; i < mcfg->max_in_queue; i++) { + for (i = 0; i < mcfg->module->max_input_pins; i++) { if (mcfg->m_in_pin[i].pin_state != SKL_PIN_BIND_DONE) return 0; } @@ -832,7 +920,7 @@ static int skl_tplg_module_add_deferred_bind(struct skl *skl, int i;

/* only supported for module with static pin connection */ - for (i = 0; i < dst->max_in_queue; i++) { + for (i = 0; i < dst->module->max_input_pins; i++) { struct skl_module_pin *pin = &dst->m_in_pin[i];

if (pin->is_dynamic) @@ -1092,7 +1180,7 @@ static int skl_tplg_mixer_dapm_pre_pmd_event(struct snd_soc_dapm_widget *w, if (ret) return ret;

- for (i = 0; i < sink_mconfig->max_in_queue; i++) { + for (i = 0; i < sink_mconfig->module->max_input_pins; i++) { if (sink_mconfig->m_in_pin[i].pin_state == SKL_PIN_BIND_DONE) { src_mconfig = sink_mconfig->m_in_pin[i].tgt_mcfg; if (!src_mconfig) @@ -1203,7 +1291,7 @@ static int skl_tplg_pga_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, if (ret) return ret;

- for (i = 0; i < src_mconfig->max_out_queue; i++) { + for (i = 0; i < src_mconfig->module->max_output_pins; i++) { if (src_mconfig->m_out_pin[i].pin_state == SKL_PIN_BIND_DONE) { sink_mconfig = src_mconfig->m_out_pin[i].tgt_mcfg; if (!sink_mconfig) @@ -1497,14 +1585,22 @@ int skl_tplg_update_pipe_params(struct device *dev, struct skl_module_cfg *mconfig, struct skl_pipe_params *params) { + struct skl_module_res *res = &mconfig->module->resources[0]; + struct skl *skl = get_skl_ctx(dev); struct skl_module_fmt *format = NULL; + u8 cfg_idx = mconfig->pipe->cur_config_idx;

skl_tplg_fill_dma_id(mconfig, params); + mconfig->fmt_idx = mconfig->mod_cfg[cfg_idx].fmt_idx; + mconfig->res_idx = mconfig->mod_cfg[cfg_idx].res_idx; + + if (skl->nr_modules) + return 0;

if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) - format = &mconfig->in_fmt[0]; + format = &mconfig->module->formats[0].inputs[0].fmt; else - format = &mconfig->out_fmt[0]; + format = &mconfig->module->formats[0].outputs[0].fmt;

/* set the hw_params */ format->s_freq = params->s_freq; @@ -1532,11 +1628,11 @@ int skl_tplg_update_pipe_params(struct device *dev, }

if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { - mconfig->ibs = (format->s_freq / 1000) * + res->ibs = (format->s_freq / 1000) * (format->channels) * (format->bit_depth >> 3); } else { - mconfig->obs = (format->s_freq / 1000) * + res->obs = (format->s_freq / 1000) * (format->channels) * (format->bit_depth >> 3); } @@ -1810,6 +1906,54 @@ static const struct snd_soc_tplg_kcontrol_ops skl_tplg_kcontrol_ops[] = { }, };

+static int skl_tplg_fill_pipe_cfg(struct device *dev, + struct skl_pipe *pipe, u32 tkn, + u32 tkn_val, int conf_idx, int dir) +{ + struct skl_pipe_fmt *fmt; + struct skl_path_config *config; + + switch (dir) { + case SKL_DIR_IN: + fmt = &pipe->configs[conf_idx].in_fmt; + break; + + case SKL_DIR_OUT: + fmt = &pipe->configs[conf_idx].out_fmt; + break; + + default: + dev_err(dev, "Invalid direction: %d\n", dir); + return -EINVAL; + } + + config = &pipe->configs[conf_idx]; + + switch (tkn) { + case SKL_TKN_U32_CFG_FREQ: + fmt->freq = tkn_val; + break; + + case SKL_TKN_U8_CFG_CHAN: + fmt->channels = tkn_val; + break; + + case SKL_TKN_U8_CFG_BPS: + fmt->bps = tkn_val; + break; + + case SKL_TKN_U32_PATH_MEM_PGS: + config->mem_pages = tkn_val; + break; + + default: + dev_err(dev, "Invalid token config: %d\n", tkn); + return -EINVAL; + } + + return 0; +} + static int skl_tplg_fill_pipe_tkn(struct device *dev, struct skl_pipe *pipe, u32 tkn, u32 tkn_val) @@ -1832,6 +1976,14 @@ static int skl_tplg_fill_pipe_tkn(struct device *dev, pipe->lp_mode = tkn_val; break;

+ case SKL_TKN_U32_PIPE_DIRECTION: + pipe->direction = tkn_val; + break; + + case SKL_TKN_U32_NUM_CONFIGS: + pipe->nr_cfgs = tkn_val; + break; + default: dev_err(dev, "Token not handled %d\n", tkn); return -EINVAL; @@ -1993,18 +2145,21 @@ static int skl_tplg_fill_fmt(struct device *dev, }

static int skl_tplg_widget_fill_fmt(struct device *dev, - struct skl_module_cfg *mconfig, + struct skl_module_iface *fmt, u32 tkn, u32 val, u32 dir, int fmt_idx) { struct skl_module_fmt *dst_fmt;

+ if (!fmt) + return -EINVAL; + switch (dir) { case SKL_DIR_IN: - dst_fmt = &mconfig->in_fmt[fmt_idx]; + dst_fmt = &fmt->inputs[fmt_idx].fmt; break;

case SKL_DIR_OUT: - dst_fmt = &mconfig->out_fmt[fmt_idx]; + dst_fmt = &fmt->outputs[fmt_idx].fmt; break;

default: @@ -2117,6 +2272,10 @@ static int skl_tplg_fill_res_tkn(struct device *dev, res->ibs = tkn_elem->value; break;

+ case SKL_TKN_U32_MAX_MCPS: + res->cps = tkn_elem->value; + break; + case SKL_TKN_MM_U32_RES_PIN_ID: case SKL_TKN_MM_U32_PIN_BUF: ret = skl_tplg_manifest_pin_res_tkn(dev, tkn_elem, res, @@ -2145,49 +2304,54 @@ static int skl_tplg_get_token(struct device *dev, int tkn_count = 0; int ret; static int is_pipe_exists; - static int pin_index, dir; + static int pin_index, dir, conf_idx; + struct skl_module_iface *iface = NULL; + struct skl_module_res *res = NULL; + int res_idx = mconfig->res_idx; + int fmt_idx = mconfig->fmt_idx; + + /* + * If the manifest structure contains no modules, fill all + * the module data to 0th index. + * res_idx and fmt_idx are default set to 0. + */ + if (skl->nr_modules == 0) { + res = &mconfig->module->resources[res_idx]; + iface = &mconfig->module->formats[fmt_idx]; + }

if (tkn_elem->token > SKL_TKN_MAX) return -EINVAL;

switch (tkn_elem->token) { case SKL_TKN_U8_IN_QUEUE_COUNT: - mconfig->max_in_queue = tkn_elem->value; - mconfig->m_in_pin = devm_kzalloc(dev, mconfig->max_in_queue * - sizeof(*mconfig->m_in_pin), - GFP_KERNEL); - if (!mconfig->m_in_pin) - return -ENOMEM; - + mconfig->module->max_input_pins = tkn_elem->value; break;

case SKL_TKN_U8_OUT_QUEUE_COUNT: - mconfig->max_out_queue = tkn_elem->value; - mconfig->m_out_pin = devm_kzalloc(dev, mconfig->max_out_queue * - sizeof(*mconfig->m_out_pin), - GFP_KERNEL); - - if (!mconfig->m_out_pin) - return -ENOMEM; - + mconfig->module->max_output_pins = tkn_elem->value; break;

case SKL_TKN_U8_DYN_IN_PIN: + if (!mconfig->m_in_pin) + mconfig->m_in_pin = devm_kzalloc(dev, MAX_IN_QUEUE * + sizeof(*mconfig->m_in_pin), GFP_KERNEL); if (!mconfig->m_in_pin) return -ENOMEM;

- skl_tplg_fill_pin_dynamic_val(mconfig->m_in_pin, - mconfig->max_in_queue, tkn_elem->value); - + skl_tplg_fill_pin_dynamic_val(mconfig->m_in_pin, MAX_IN_QUEUE, + tkn_elem->value); break;

case SKL_TKN_U8_DYN_OUT_PIN: + if (!mconfig->m_out_pin) + mconfig->m_out_pin = devm_kzalloc(dev, MAX_IN_QUEUE * + sizeof(*mconfig->m_in_pin), GFP_KERNEL); if (!mconfig->m_out_pin) return -ENOMEM;

- skl_tplg_fill_pin_dynamic_val(mconfig->m_out_pin, - mconfig->max_out_queue, tkn_elem->value); - + skl_tplg_fill_pin_dynamic_val(mconfig->m_out_pin, MAX_OUT_QUEUE, + tkn_elem->value); break;

case SKL_TKN_U8_TIME_SLOT: @@ -2215,19 +2379,13 @@ static int skl_tplg_get_token(struct device *dev, break;

case SKL_TKN_U32_MEM_PAGES: - mconfig->mem_pages = tkn_elem->value; - break; - case SKL_TKN_U32_MAX_MCPS: - mconfig->mcps = tkn_elem->value; - break; - case SKL_TKN_U32_OBS: - mconfig->obs = tkn_elem->value; - break; - case SKL_TKN_U32_IBS: - mconfig->ibs = tkn_elem->value; + ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, dir, pin_index); + if (ret < 0) + return ret; + break;

case SKL_TKN_U32_VBUS_ID: @@ -2260,10 +2418,16 @@ static int skl_tplg_get_token(struct device *dev,

break;

+ case SKL_TKN_U32_PIPE_CONFIG_ID: + conf_idx = tkn_elem->value; + break; + case SKL_TKN_U32_PIPE_CONN_TYPE: case SKL_TKN_U32_PIPE_PRIORITY: case SKL_TKN_U32_PIPE_MEM_PGS: case SKL_TKN_U32_PMODE: + case SKL_TKN_U32_PIPE_DIRECTION: + case SKL_TKN_U32_NUM_CONFIGS: if (is_pipe_exists) { ret = skl_tplg_fill_pipe_tkn(dev, mconfig->pipe, tkn_elem->token, tkn_elem->value); @@ -2273,6 +2437,27 @@ static int skl_tplg_get_token(struct device *dev,

break;

+ case SKL_TKN_U32_PATH_MEM_PGS: + case SKL_TKN_U32_CFG_FREQ: + case SKL_TKN_U8_CFG_CHAN: + case SKL_TKN_U8_CFG_BPS: + if (mconfig->pipe->nr_cfgs) { + ret = skl_tplg_fill_pipe_cfg(dev, mconfig->pipe, + tkn_elem->token, tkn_elem->value, + conf_idx, dir); + if (ret < 0) + return ret; + } + break; + + case SKL_TKN_CFG_MOD_RES_ID: + mconfig->mod_cfg[conf_idx].res_idx = tkn_elem->value; + break; + + case SKL_TKN_CFG_MOD_FMT_ID: + mconfig->mod_cfg[conf_idx].fmt_idx = tkn_elem->value; + break; + /* * SKL_TKN_U32_DIR_PIN_COUNT token has the value for both * direction and the pin count. The first four bits represent @@ -2293,7 +2478,7 @@ static int skl_tplg_get_token(struct device *dev, case SKL_TKN_U32_FMT_INTERLEAVE: case SKL_TKN_U32_FMT_SAMPLE_TYPE: case SKL_TKN_U32_FMT_CH_MAP: - ret = skl_tplg_widget_fill_fmt(dev, mconfig, tkn_elem->token, + ret = skl_tplg_widget_fill_fmt(dev, iface, tkn_elem->token, tkn_elem->value, dir, pin_index);

if (ret < 0) @@ -2518,11 +2703,11 @@ static void skl_clear_pin_config(struct snd_soc_platform *platform, strlen(platform->component.name))) { mconfig = w->priv; pipe = mconfig->pipe; - for (i = 0; i < mconfig->max_in_queue; i++) { + for (i = 0; i < mconfig->module->max_input_pins; i++) { mconfig->m_in_pin[i].in_use = false; mconfig->m_in_pin[i].pin_state = SKL_PIN_UNBIND; } - for (i = 0; i < mconfig->max_out_queue; i++) { + for (i = 0; i < mconfig->module->max_output_pins; i++) { mconfig->m_out_pin[i].in_use = false; mconfig->m_out_pin[i].pin_state = SKL_PIN_UNBIND; } @@ -2581,6 +2766,13 @@ static int skl_tplg_widget_load(struct snd_soc_component *cmpnt, if (!mconfig) return -ENOMEM;

+ if (skl->nr_modules == 0) { + mconfig->module = devm_kzalloc(bus->dev, + sizeof(*mconfig->module), GFP_KERNEL); + if (!mconfig->module) + return -ENOMEM; + } + w->priv = mconfig;

/* diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index 9324f5eec69f..25e719243be3 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -274,6 +274,23 @@ struct skl_pipe_params { unsigned int link_bps; };

+struct skl_pipe_fmt { + u32 freq; + u8 channels; + u8 bps; +}; + +struct skl_pipe_mcfg { + u8 res_idx; + u8 fmt_idx; +}; + +struct skl_path_config { + u8 mem_pages; + struct skl_pipe_fmt in_fmt; + struct skl_pipe_fmt out_fmt; +}; + struct skl_pipe { u8 ppl_id; u8 pipe_priority; @@ -282,6 +299,10 @@ struct skl_pipe { u8 lp_mode; struct skl_pipe_params *p_params; enum skl_pipe_state state; + u8 direction; + u8 cur_config_idx; + u8 nr_cfgs; + struct skl_path_config configs[SKL_MAX_PATH_CONFIGS]; struct list_head w_list; bool passthru; }; @@ -349,6 +370,9 @@ struct skl_module { struct skl_module_cfg { u8 guid[16]; struct skl_module_inst_id id; + struct skl_module *module; + int res_idx; + int fmt_idx; u8 domain; bool homogenous_inputs; bool homogenous_outputs; @@ -383,6 +407,7 @@ struct skl_module_cfg { enum skl_module_state m_state; struct skl_pipe *pipe; struct skl_specific_cfg formats_config; + struct skl_pipe_mcfg mod_cfg[SKL_MAX_MODULES_IN_PIPE]; };

struct skl_algo_data {

-- 2.14.1

Guneshwor Singh

10:46 a.m.

New subject: [alsa-devel] [PATCH 7/7] ASoC: Intel: Skylake: Update module id in pin connections

From: Jeeja KP jeeja.kp@intel.com

Each module's id comes from the topology and gets updated in the driver. This patch updates the input and output pin connections of each module by matching the uuid for each module.

Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com --- sound/soc/intel/skylake/skl-pcm.c | 41 +++++++++++++++++++++++++++++++--- sound/soc/intel/skylake/skl-topology.h | 1 + 2 files changed, 39 insertions(+), 3 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index a756882b9029..2b1e513b1680 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1220,8 +1220,11 @@ static int skl_pcm_new(struct snd_soc_pcm_runtime *rtd) static int skl_get_module_info(struct skl *skl, struct skl_module_cfg *mconfig) { struct skl_sst *ctx = skl->skl_sst; + struct skl_module_inst_id *pin_id; + uuid_le *uuid_mod, *uuid_tplg; + struct skl_module *skl_module; struct uuid_module *module; - uuid_le *uuid_mod; + int i, ret = -EIO;

uuid_mod = (uuid_le *)mconfig->guid;

@@ -1235,11 +1238,43 @@ static int skl_get_module_info(struct skl *skl, struct skl_module_cfg *mconfig) mconfig->id.module_id = module->id; if (mconfig->module) mconfig->module->loadable = module->is_loadable; - return 0; + ret = 0; + break; } }

- return -EIO; + if (ret) + return ret; + + uuid_mod = &module->uuid; + ret = -EIO; + for (i = 0; i < skl->nr_modules; i++) { + skl_module = skl->modules[i]; + uuid_tplg = &skl_module->uuid; + if (!uuid_le_cmp(*uuid_mod, *uuid_tplg)) { + mconfig->module = skl_module; + ret = 0; + break; + } + } + if (skl->nr_modules && ret) + return ret; + + list_for_each_entry(module, &ctx->uuid_list, list) { + for (i = 0; i < MAX_IN_QUEUE; i++) { + pin_id = &mconfig->m_in_pin[i].id; + if (!uuid_le_cmp(pin_id->mod_uuid, module->uuid)) + pin_id->module_id = module->id; + } + + for (i = 0; i < MAX_OUT_QUEUE; i++) { + pin_id = &mconfig->m_out_pin[i].id; + if (!uuid_le_cmp(pin_id->mod_uuid, module->uuid)) + pin_id->module_id = module->id; + } + } + + return 0; }

static int skl_populate_modules(struct skl *skl) diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index 25e719243be3..b4d2082ec396 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -222,6 +222,7 @@ struct skl_kpb_params { };

struct skl_module_inst_id { + uuid_le mod_uuid; int module_id; u32 instance_id; int pvt_id;

-- 2.14.1

Mark Brown

27 Aug 27 Aug

3:38 p.m.

New subject: [alsa-devel] Applied "ASoC: Intel: Skylake: Update module id in pin connections" to the asoc tree

The patch

ASoC: Intel: Skylake: Update module id in pin connections

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

...

From 91fe0e70dbfb1142e17cebaa9186794b51a28cf7 Mon Sep 17 00:00:00 2001

From: Jeeja KP jeeja.kp@intel.com Date: Wed, 23 Aug 2017 19:33:54 +0530 Subject: [PATCH] ASoC: Intel: Skylake: Update module id in pin connections

Each module's id comes from the topology and gets updated in the driver. This patch updates the input and output pin connections of each module by matching the uuid for each module.

Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Guneshwor Singh guneshwor.o.singh@intel.com Acked-By: Vinod Koul vinod.koul@intel.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/intel/skylake/skl-pcm.c | 41 +++++++++++++++++++++++++++++++--- sound/soc/intel/skylake/skl-topology.h | 1 + 2 files changed, 39 insertions(+), 3 deletions(-)

uuid_mod = (uuid_le *)mconfig->guid;

static int skl_populate_modules(struct skl *skl) diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index 90903a15fa1d..4975904480e9 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -221,6 +221,7 @@ struct skl_kpb_params { };

struct skl_module_inst_id { + uuid_le mod_uuid; int module_id; u32 instance_id; int pvt_id;

-- 2.13.2

2674

Age (days ago)

2680

Last active (days ago)

List overview

Download

10 comments

2 participants

tags (0)

participants (2)

Guneshwor Singh
Mark Brown