On Mon, Dec 24, 2018 at 12:39 AM Cheng-Yi Chiang cychiang@chromium.org wrote:

Add documentation for Chrome EC codec driver.

Signed-off-by: Cheng-Yi Chiang cychiang@chromium.org

Change in v2: Fixed name of driver in MAINTAINERS.

.../bindings/sound/google,cros-ec-codec.txt | 24 +++++++++++++++++++

Since this is a devicetree binding, it will require an Ack from a DT maintainer. You might want to check the output of scripts/get_maintainer.pl to make sure you don't miss anyone important.

Guenter

MAINTAINERS | 5 ++++ 2 files changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt

diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt new file mode 100644 index 0000000000000..57718382b3a36 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt @@ -0,0 +1,24 @@ +* Audio codec controlled by ChromeOS EC

+Google's ChromeOS EC codec is a digital mic codec provided by the +Embedded Controller (EC) and is controlled via a host-command interface.

+An EC codec node should only be found as a sub-node of the EC node (see +Documentation/devicetree/bindings/mfd/cros-ec.txt).

+Required properties: +- compatible: Must contain "google,cros-ec-codec" +- #sound-dai-cells: Should be 1. The cell specifies number of DAIs.

+Example:

+cros-ec@0 {

•   compatible = "google,cros-ec-spi";
  

•   ...
  

•   cros_ec_codec: ec-codec {
  

•           compatible = "google,cros-ec-codec";
  

•           #sound-dai-cells = <1>;
  

•   };
  

+}; diff --git a/MAINTAINERS b/MAINTAINERS index 5b9c6af98283b..05e1922624e58 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3636,6 +3636,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform.git F: drivers/platform/chrome/

+CHROMEOS EC CODEC DRIVER +M: Cheng-Yi Chiang cychiang@chromium.org +S: Maintained +F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt

CIRRUS LOGIC AUDIO CODEC DRIVERS M: Brian Austin brian.austin@cirrus.com M: Paul Handrigan Paul.Handrigan@cirrus.com -- 2.20.1.415.g653613c723-goog

Hi Guenter, Thanks a lot for reviewing the patch on holidays.

On Mon, Dec 24, 2018 at 10:48 PM Guenter Roeck groeck@google.com wrote:

On Mon, Dec 24, 2018 at 12:45 AM Cheng-Yi Chiang cychiang@chromium.org wrote:

...

Add a codec driver to control ChromeOS EC codec.

Use EC Host command to enable/disable I2S recording and control other configurations.

Signed-off-by: Cheng-Yi Chiang cychiang@chromium.org

Addressed Enric's comments.

Changes in v2:

• Many style fixes. Passed checkpatch.pl --strict.
• Use ChromeOS naming.
• Remove license boilerplate.
• Use u8 instead of uint8_t.
• Remove useless debug messages.
• Remove useless remove ops.
• Remove -EPROBE_DEFER in probe.

MAINTAINERS | 2 + sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/cros_ec_codec.c | 458 +++++++++++++++++++++++++++++++ sound/soc/codecs/cros_ec_codec.h | 21 ++ 5 files changed, 491 insertions(+) create mode 100644 sound/soc/codecs/cros_ec_codec.c create mode 100644 sound/soc/codecs/cros_ec_codec.h

diff --git a/MAINTAINERS b/MAINTAINERS index 05e1922624e58..d66f80f3252d7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3638,8 +3638,10 @@ F: drivers/platform/chrome/

CHROMEOS EC CODEC DRIVER M: Cheng-Yi Chiang cychiang@chromium.org +R: Enric Balletbo i Serra enric.balletbo@collabora.com S: Maintained F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt +F: sound/soc/codecs/cros_ec_codec.*

CIRRUS LOGIC AUDIO CODEC DRIVERS M: Brian Austin brian.austin@cirrus.com diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 87cb9c51e6f5a..0b36428159b71 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -50,6 +50,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_BT_SCO select SND_SOC_BD28623 select SND_SOC_CQ0093VC

•   select SND_SOC_CROS_EC_CODEC
    select SND_SOC_CS35L32 if I2C
    select SND_SOC_CS35L33 if I2C
    select SND_SOC_CS35L34 if I2C
  

@@ -457,6 +458,13 @@ config SND_SOC_CPCAP config SND_SOC_CQ0093VC tristate

+config SND_SOC_CROS_EC_CODEC

•   tristate "codec driver for ChromeOS EC"
  

•   depends on MFD_CROS_EC
  

•   help
  

•     If you say yes here you will get support for the
  

•     ChromeOS Embedded Controller's Audio Codec.
  

config SND_SOC_CS35L32 tristate "Cirrus Logic CS35L32 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9bb3346fab2fe..3cfd8f5f61705 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -42,6 +42,7 @@ snd-soc-bd28623-objs := bd28623.o snd-soc-bt-sco-objs := bt-sco.o snd-soc-cpcap-objs := cpcap.o snd-soc-cq93vc-objs := cq93vc.o +snd-soc-cros-ec-codec-objs := cros_ec_codec.o snd-soc-cs35l32-objs := cs35l32.o snd-soc-cs35l33-objs := cs35l33.o snd-soc-cs35l34-objs := cs35l34.o @@ -310,6 +311,7 @@ obj-$(CONFIG_SND_SOC_BD28623) += snd-soc-bd28623.o obj-$(CONFIG_SND_SOC_BT_SCO) += snd-soc-bt-sco.o obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o obj-$(CONFIG_SND_SOC_CPCAP) += snd-soc-cpcap.o +obj-$(CONFIG_SND_SOC_CROS_EC_CODEC) += snd-soc-cros-ec-codec.o obj-$(CONFIG_SND_SOC_CS35L32) += snd-soc-cs35l32.o obj-$(CONFIG_SND_SOC_CS35L33) += snd-soc-cs35l33.o obj-$(CONFIG_SND_SOC_CS35L34) += snd-soc-cs35l34.o diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c new file mode 100644 index 0000000000000..39e61bf46b5c0 --- /dev/null +++ b/sound/soc/codecs/cros_ec_codec.c @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0 +/*

• • Driver for ChromeOS Embedded Controller codec.
• • This driver uses the cros-ec interface to communicate with the ChromeOS
• • EC for audio function.
• */

+#include <linux/delay.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h>

+#include "cros_ec_codec.h"

+#define MAX_GAIN 43

+#define DRV_NAME "cros-ec-codec"

+static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0); +/*

• • Wrapper for EC command.
• */

+static int ec_command(struct snd_soc_component *component, int version,

•                 int command, u8 *outdata, int outsize,
  

•                 u8 *indata, int insize)
  

+{

•   struct cros_ec_codec_data *codec_data =
  

•           snd_soc_component_get_drvdata(component);
  

•   struct cros_ec_device *ec_device = codec_data->ec_device;
  

•   struct cros_ec_command *msg;
  

•   int ret;
  

•   msg = kzalloc(sizeof(*msg) + max(insize, outsize), GFP_KERNEL);
  

•   if (!msg)
  

•           return -ENOMEM;
  

•   msg->version = version;
  

•   msg->command = command;
  

•   msg->outsize = outsize;
  

•   msg->insize = insize;
  

•   if (outsize)
  

•           memcpy(msg->data, outdata, outsize);
  

•   ret = cros_ec_cmd_xfer_status(ec_device, msg);
  

•   if (ret > 0 && insize)
  

•           memcpy(indata, msg->data, insize);
  

•   kfree(msg);
  

•   return ret;
  

+}

+static int set_i2s_config(struct snd_soc_component *component,

•                     enum ec_i2s_config i2s_config)
  

+{

•   struct ec_param_codec_i2s param;
  

•   int ret;
  

•   dev_dbg(component->dev, "%s set I2S format to %u\n", __func__,
  

•           i2s_config);
  

•   param.cmd = EC_CODEC_I2S_SET_CONFIG;
  

•   param.i2s_config = i2s_config;
  

•   ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
  

•                    (u8 *)&param, sizeof(param),
  

•                    NULL, 0);
  

•   if (ret < 0) {
  

•           dev_err(component->dev,
  

•                   "set I2S format to %u command returned %d\n",
  

•                   i2s_config, ret);
  

•           return -EINVAL;
  

Overriding error codes is discouraged. You'll probably get a warning from a static analyzer for this.

Fixed here and many other places in v3. Could you please suggest a static analyzer ? I tried smatch ( https://repo.or.cz/smatch.git ) but it could not find this kind of issue.

...

•   }
  

•   return 0;
  

+}

+static int cros_ec_i2s_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{

•   struct snd_soc_component *component = dai->component;
  

•   enum ec_i2s_config i2s_config;
  

•   switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
  

•   case SND_SOC_DAIFMT_CBS_CFS:
  

•           break;
  

•   default:
  

•           return -EINVAL;
  

•   }
  

•   switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
  

•   case SND_SOC_DAIFMT_NB_NF:
  

•           break;
  

•   default:
  

•           return -EINVAL;
  

•   }
  

•   switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
  

•   case SND_SOC_DAIFMT_I2S:
  

•           i2s_config = EC_DAI_FMT_I2S;
  

•           break;
  

•   case SND_SOC_DAIFMT_RIGHT_J:
  

•           i2s_config = EC_DAI_FMT_RIGHT_J;
  

•           break;
  

•   case SND_SOC_DAIFMT_LEFT_J:
  

•           i2s_config = EC_DAI_FMT_LEFT_J;
  

•           break;
  

•   case SND_SOC_DAIFMT_DSP_A:
  

•           i2s_config = EC_DAI_FMT_PCM_A;
  

•           break;
  

•   case SND_SOC_DAIFMT_DSP_B:
  

•           i2s_config = EC_DAI_FMT_PCM_B;
  

•           break;
  

•   default:
  

•           return -EINVAL;
  

•   }
  

•   set_i2s_config(component, i2s_config);
  

•   return 0;
  

+}

+static int set_i2s_sample_depth(struct snd_soc_component *component,

•                           enum ec_sample_depth_value depth)
  

+{

•   struct ec_param_codec_i2s param;
  

•   int ret;
  

•   dev_dbg(component->dev, "%s set depth to %u\n", __func__, depth);
  

•   param.cmd = EC_CODEC_SET_SAMPLE_DEPTH;
  

•   param.depth = depth;
  

•   ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
  

•                    (u8 *)&param, sizeof(param),
  

•                    NULL, 0);
  

•   if (ret < 0) {
  

•           dev_err(component->dev, "I2S sample depth %u returned %d\n",
  

•                   depth, ret);
  

Is all that error noise common in ASoC drivers ? If it can result in log spam, I would recommend against it.

This is useful for debugging when EC does not handle the request correctly. Usually this will not happen so it will not spam the log.

...

•           return -EINVAL;
  

Same as above and everywhere else.

Fixed in v3.

...

•   }
  

•   return 0;
  

+}

+static int set_bclk(struct snd_soc_component *component, uint32_t bclk) +{

•   struct ec_param_codec_i2s param;
  

•   int ret;
  

•   dev_dbg(component->dev, "%s set i2s bclk to %u\n", __func__, bclk);
  

•   param.cmd = EC_CODEC_I2S_SET_BCLK;
  

•   param.bclk = bclk;
  

•   ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
  

•                    (u8 *)&param, sizeof(param),
  

•                    NULL, 0);
  

•   if (ret < 0) {
  

•           dev_err(component->dev, "I2S set bclk %u command returned %d\n",
  

•                   bclk, ret);
  

•           return -EINVAL;
  

•   }
  

•   return 0;
  

+}

+static int cros_ec_i2s_hw_params(struct snd_pcm_substream *substream,

•                            struct snd_pcm_hw_params *params,
  

•                            struct snd_soc_dai *dai)
  

+{

•   struct snd_soc_component *component = dai->component;
  

•   int frame_size;
  

•   unsigned int rate, bclk;
  

•   int ret;
  

•   frame_size = snd_soc_params_to_frame_size(params);
  

•   if (frame_size < 0) {
  

•           dev_err(component->dev, "Unsupported frame size: %d\n",
  

•                   frame_size);
  

•           return -EINVAL;
  

•   }
  

•   rate = params_rate(params);
  

•   if (rate != 48000) {
  

•           dev_err(component->dev, "Unsupported rate\n");
  

•           return -EINVAL;
  

•   }
  

•   switch (params_format(params)) {
  

•   case SNDRV_PCM_FORMAT_S16_LE:
  

•           ret = set_i2s_sample_depth(component, EC_CODEC_SAMPLE_DEPTH_16);
  

•           break;
  

•   case SNDRV_PCM_FORMAT_S24_LE:
  

•           ret = set_i2s_sample_depth(component, EC_CODEC_SAMPLE_DEPTH_24);
  

•           break;
  

•   default:
  

•           return -EINVAL;
  

•   }
  

•   if (ret)
  

•           return ret;
  

•   bclk = snd_soc_params_to_bclk(params);
  

•   ret = set_bclk(component, bclk);
  

•   return ret;
  

+}

+static const struct snd_soc_dai_ops cros_ec_i2s_dai_ops = {

•   .hw_params = cros_ec_i2s_hw_params,
  

•   .set_fmt = cros_ec_i2s_set_dai_fmt,
  

+};

+struct snd_soc_dai_driver cros_ec_dai[] = {

•   {
  

•           .name = "cros_ec_codec I2S",
  

•           .id = 0,
  

•           .capture = {
  

•                   .stream_name = "I2S Capture",
  

•                   .channels_min = 2,
  

•                   .channels_max = 2,
  

•                   .rates = SNDRV_PCM_RATE_48000,
  

•                   .formats = SNDRV_PCM_FMTBIT_S16_LE |
  

•                              SNDRV_PCM_FMTBIT_S24_LE,
  

•           },
  

•           .ops = &cros_ec_i2s_dai_ops,
  

•   }
  

+};

+static int get_ec_mic_gain(struct snd_soc_component *component,

•                      u8 *left, u8 *right)
  

+{

•   struct ec_param_codec_i2s param;
  

•   struct ec_response_codec_gain resp;
  

•   int ret;
  

•   param.cmd = EC_CODEC_GET_GAIN;
  

•   ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
  

•                    (u8 *)&param, sizeof(param),
  

•                    (u8 *)&resp, sizeof(resp));
  

•   if (ret < 0) {
  

•           dev_err(component->dev, "I2S get gain command returned %d\n",
  

•                   ret);
  

•           return -EINVAL;
  

•   }
  

•   *left = resp.left;
  

•   *right = resp.right;
  

•   dev_dbg(component->dev, "%s get mic gain %u, %u\n", __func__,
  

•           *left, *right);
  

•   return 0;
  

+}

+static int mic_gain_get(struct snd_kcontrol *kcontrol,

•                   struct snd_ctl_elem_value *ucontrol)
  

+{

•   struct snd_soc_component *component =
  

•           snd_soc_kcontrol_component(kcontrol);
  

•   u8 left, right;
  

•   int ret;
  

•   ret = get_ec_mic_gain(component, &left, &right);
  

An empty line before checking return codes used to result in a checkpatch warning. Even if that is not so anymore, I would suggest to remove such empty lines as unnecessary.

Fixed in v3.

...

•   if (ret)
  

•           return ret;
  

•   ucontrol->value.integer.value[0] = left;
  

•   ucontrol->value.integer.value[1] = right;
  

•   return 0;
  

+}

+static int set_ec_mic_gain(struct snd_soc_component *component,

•                      u8 left, u8 right)
  

+{

•   struct ec_param_codec_i2s param;
  

•   int ret;
  

•   dev_dbg(component->dev, "%s set mic gain to %u, %u\n",
  

•           __func__, left, right);
  

•   param.cmd = EC_CODEC_SET_GAIN;
  

•   param.gain.left = left;
  

•   param.gain.right = right;
  

•   ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
  

•                    (u8 *)&param, sizeof(param),
  

•                    NULL, 0);
  

•   if (ret < 0) {
  

•           dev_err(component->dev, "I2S set gain command returned %d\n",
  

•                   ret);
  

•           return -EINVAL;
  

•   }
  

•   return 0;
  

+}

+static int mic_gain_put(struct snd_kcontrol *kcontrol,

•                   struct snd_ctl_elem_value *ucontrol)
  

+{

•   struct snd_soc_component *component =
  

•           snd_soc_kcontrol_component(kcontrol);
  

•   int left = ucontrol->value.integer.value[0];
  

•   int right = ucontrol->value.integer.value[1];
  

•   int ret;
  

•   if (left > MAX_GAIN || right > MAX_GAIN)
  

•           return -EINVAL;
  

•   ret = set_ec_mic_gain(component, (u8)left, (u8)right);
  

•   if (ret)
  

•           return ret;
  

•   return 0;
  

+}

+static const struct snd_kcontrol_new cros_ec_snd_controls[] = {

•   SOC_DOUBLE_EXT_TLV("EC Mic Gain", SND_SOC_NOPM, SND_SOC_NOPM, 0, 43, 0,
  

•                      mic_gain_get, mic_gain_put, ec_mic_gain_tlv)
  

+};

+static int enable_i2s(struct snd_soc_component *component, int enable) +{

•   struct ec_param_codec_i2s param;
  

•   int ret;
  

•   dev_dbg(component->dev, "%s set i2s to %u\n", __func__, enable);
  

•   param.cmd = EC_CODEC_I2S_ENABLE;
  

•   param.i2s_enable = enable;
  

•   ret = ec_command(component, 0, EC_CMD_CODEC_I2S,
  

•                    (u8 *)&param, sizeof(param),
  

•                    NULL, 0);
  

•   if (ret < 0) {
  

•           dev_err(component->dev, "I2S enable %d command returned %d\n",
  

•                   enable, ret);
  

•           return -EINVAL;
  

•   }
  

•   return 0;
  

+}

+static int cros_ec_i2s_enable_event(struct snd_soc_dapm_widget *w,

•                               struct snd_kcontrol *kcontrol, int event)
  

+{

•   struct snd_soc_component *component =
  

•           snd_soc_dapm_to_component(w->dapm);
  

•   switch (event) {
  

•   case SND_SOC_DAPM_PRE_PMU:
  

•           dev_dbg(component->dev,
  

•                   "%s got SND_SOC_DAPM_PRE_PMU event\n", __func__);
  

•           return enable_i2s(component, 1);
  

•   case SND_SOC_DAPM_PRE_PMD:
  

•           dev_dbg(component->dev,
  

•                   "%s got SND_SOC_DAPM_PRE_PMD event\n", __func__);
  

•           return enable_i2s(component, 0);
  

•   }
  

•   return 0;
  

+}

+/*

• • The goal of this DAPM route is to turn on/off I2S using EC
• • host command when capture stream is started/stopped.
• */

+static const struct snd_soc_dapm_widget cros_ec_dapm_widgets[] = {

•   SND_SOC_DAPM_INPUT("DMIC"),
  

•   /*
  

•    * Control EC to enable/disable I2S.
  

•    */
  

•   SND_SOC_DAPM_SUPPLY("I2S Enable", SND_SOC_NOPM,
  

•                       0, 0, cros_ec_i2s_enable_event,
  

•                       SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
  

•   SND_SOC_DAPM_AIF_OUT("I2STX", "I2S Capture", 0, SND_SOC_NOPM, 0, 0),
  

+};

+static const struct snd_soc_dapm_route cros_ec_dapm_routes[] = {

•   { "I2STX", NULL, "DMIC" },
  

•   { "I2STX", NULL, "I2S Enable" },
  

+};

+static const struct snd_soc_component_driver cros_ec_component_driver = {

•   .controls               = cros_ec_snd_controls,
  

•   .num_controls           = ARRAY_SIZE(cros_ec_snd_controls),
  

•   .dapm_widgets           = cros_ec_dapm_widgets,
  

•   .num_dapm_widgets       = ARRAY_SIZE(cros_ec_dapm_widgets),
  

•   .dapm_routes            = cros_ec_dapm_routes,
  

•   .num_dapm_routes        = ARRAY_SIZE(cros_ec_dapm_routes),
  

+};

+/*

• • Platform device and platform driver fro cros-ec-codec.
• */

+static int cros_ec_codec_platform_probe(struct platform_device *pd) +{

•   struct device *dev = &pd->dev;
  

•   struct cros_ec_device *ec_device = dev_get_drvdata(pd->dev.parent);
  

•   struct cros_ec_codec_data *codec_data;
  

•   int rc;
  

•   codec_data = devm_kzalloc(dev, sizeof(struct cros_ec_codec_data),
  

•                             GFP_KERNEL);
  

•   if (!codec_data)
  

•           return -ENOMEM;
  

•   codec_data->dev = dev;
  

•   codec_data->ec_device = ec_device;
  

•   platform_set_drvdata(pd, codec_data);
  

•   rc = snd_soc_register_component(dev, &cros_ec_component_driver,
  

•                                   cros_ec_dai, ARRAY_SIZE(cros_ec_dai));
  

•   dev_dbg(dev, "%s done\n", __func__);
  

•   return 0;
  

+}

+#ifdef CONFIG_OF +static const struct of_device_id cros_ec_codec_of_match[] = {

•   { .compatible = "google,cros-ec-codec" },
  

•   {},
  

+}; +MODULE_DEVICE_TABLE(of, cros_ec_codec_of_match); +#endif

+static struct platform_driver cros_ec_codec_platform_driver = {

•   .driver = {
  

•           .name = DRV_NAME,
  

•           .of_match_table = of_match_ptr(cros_ec_codec_of_match),
  

•   },
  

•   .probe = cros_ec_codec_platform_probe,
  

+};

+module_platform_driver(cros_ec_codec_platform_driver);

+MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ChromeOS EC codec driver"); +MODULE_AUTHOR("Cheng-Yi Chiang cychiang@chromium.org"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/sound/soc/codecs/cros_ec_codec.h b/sound/soc/codecs/cros_ec_codec.h new file mode 100644 index 0000000000000..3c566079f4ee2 --- /dev/null +++ b/sound/soc/codecs/cros_ec_codec.h

I don't see the point of this include file. The data structure it defines is only used in a single source file, and may as well be defined there. I would suggest to do that unless it is common practice in ASoC drivers.

Yes you are right. Removed in v3.

...

@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/*

• • ChromeOS EC Codec
• */

+#ifndef __CROS_EC_CODEC_H +#define __CROS_EC_CODEC_H

+/**

• • struct cros_ec_codec_data - ChromeOS EC codec driver data.
• • @dev: Device structure used in sysfs.
• • @ec_device: cros_ec_device structure to talk to the physical device.
• • @component: Pointer to the component.
• */

+struct cros_ec_codec_data {

•   struct device *dev;
  

•   struct cros_ec_device *ec_device;
  

•   struct snd_soc_component *component;
  

+};

+#endif /* __CROS_EC_CODEC_H */

2.20.1.415.g653613c723-goog