[alsa-devel] [PATCH 1/2] dt-bindings: sound: Add TLV320ADCx140 dt bindings
Add dt bindings for the TLV320ADCx140 Burr-Brown ADC. The initial support is for the following:
TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140 TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140 TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140
CC: Rob Herring robh@kernel.org Signed-off-by: Dan Murphy dmurphy@ti.com --- .../bindings/sound/tlv320adcx140.yaml | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml new file mode 100644 index 000000000000..84c407fae21e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter + +maintainers: + - Dan Murphy dmurphy@ti.com + +description: | + The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital + PDM microphones recording), high-performance audio, analog-to-digital + converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140 + family supports line and microphone Inputs, and offers a programmable + microphone bias or supply voltage generation. + + Specifications can be found at: + http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf + +properties: + compatible: + oneOf: + - const: ti,tlv320adc3140 + - const: ti,tlv320adc5140 + - const: ti,tlv320adc6140 + + reg: + maxItems: 1 + description: | + I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpios: + description: | + GPIO used for hardware reset. + + ti,use-internal-areg: + type: boolean + description: | + Internal Regulator with AVDD at 3.3V. + + ti,mic-bias-source: + description: | + Indicates the source for MIC Bias. + 0 - Mic bias is set to VREF + 1 - Mic bias is set to VREF × 1.096 + 6 - Mic bias is set to AVDD + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 6] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tlv320adc5140"; + reg = <0x4c>; + ti,use-internal-areg; + ti,mic-bias-source = <6>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + };
Add the tlv320adcx140 codec driver family.
The TLV320ADCx140 is a Burr-Brown™ highperformance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to four analog channels or eight digital channels for the pulse density modulation (PDM) microphone input. The device supports line and microphone inputs, and allows for both single-ended and differential input configurations.
Signed-off-by: Dan Murphy dmurphy@ti.com --- sound/soc/codecs/Kconfig | 9 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320adcx140.c | 783 +++++++++++++++++++++++++++++++ sound/soc/codecs/tlv320adcx140.h | 123 +++++ 4 files changed, 917 insertions(+) create mode 100644 sound/soc/codecs/tlv320adcx140.c create mode 100644 sound/soc/codecs/tlv320adcx140.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 7e90f5d83097..69019402c21a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -205,6 +205,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_TLV320AIC3X if I2C select SND_SOC_TPA6130A2 if I2C select SND_SOC_TLV320DAC33 if I2C + select SND_SOC_TLV320ADCX140 if I2C select SND_SOC_TSCS42XX if I2C select SND_SOC_TSCS454 if I2C select SND_SOC_TS3A227E if I2C @@ -1282,6 +1283,14 @@ config SND_SOC_TLV320AIC3X config SND_SOC_TLV320DAC33 tristate
+config SND_SOC_TLV320ADCX140 + tristate "Texas Instruments TLV320ADCX140 CODEC family" + depends on I2C + select REGMAP_I2C + help + Add support for Texas Instruments tlv320adc3140, tlv320adc5140 and + tlv320adc6140 quad channel ADCs. + config SND_SOC_TS3A227E tristate "TI Headset/Mic detect and keypress chip" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index ba1b4b3fa2da..943ebc93fbc1 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -218,6 +218,7 @@ snd-soc-tlv320aic32x4-i2c-objs := tlv320aic32x4-i2c.o snd-soc-tlv320aic32x4-spi-objs := tlv320aic32x4-spi.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o snd-soc-tlv320dac33-objs := tlv320dac33.o +snd-soc-tlv320adcx140-objs := tlv320adcx140.o snd-soc-tscs42xx-objs := tscs42xx.o snd-soc-tscs454-objs := tscs454.o snd-soc-ts3a227e-objs := ts3a227e.o @@ -516,6 +517,7 @@ obj-$(CONFIG_SND_SOC_TLV320AIC32X4_I2C) += snd-soc-tlv320aic32x4-i2c.o obj-$(CONFIG_SND_SOC_TLV320AIC32X4_SPI) += snd-soc-tlv320aic32x4-spi.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o obj-$(CONFIG_SND_SOC_TLV320DAC33) += snd-soc-tlv320dac33.o +obj-$(CONFIG_SND_SOC_TLV320ADCX140) += snd-soc-tlv320adcx140.o obj-$(CONFIG_SND_SOC_TSCS42XX) += snd-soc-tscs42xx.o obj-$(CONFIG_SND_SOC_TSCS454) += snd-soc-tscs454.o obj-$(CONFIG_SND_SOC_TS3A227E) += snd-soc-ts3a227e.o diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c new file mode 100644 index 000000000000..f3a8495d1047 --- /dev/null +++ b/sound/soc/codecs/tlv320adcx140.c @@ -0,0 +1,783 @@ +// SPDX-License-Identifier: GPL-2.0 +// TLV320ADCX140 Sound driver +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> +#include <linux/acpi.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "tlv320adcx140.h" + +struct adcx140_priv { + struct snd_soc_component *component; + struct gpio_desc *gpio_reset; + struct regmap *regmap; + struct device *dev; + + int micbias_vg; +}; + +static const struct reg_default adcx140_reg_defaults[] = { + { ADCX140_PAGE_SELECT, 0x00 }, + { ADCX140_SW_RESET, 0x00 }, + { ADCX140_SLEEP_CFG, 0x00 }, + { ADCX140_SHDN_CFG, 0x05 }, + { ADCX140_ASI_CFG0, 0x30 }, + { ADCX140_ASI_CFG1, 0x00 }, + { ADCX140_ASI_CFG2, 0x00 }, + { ADCX140_ASI_CH1, 0x00 }, + { ADCX140_ASI_CH2, 0x01 }, + { ADCX140_ASI_CH3, 0x02 }, + { ADCX140_ASI_CH4, 0x03 }, + { ADCX140_ASI_CH5, 0x04 }, + { ADCX140_ASI_CH6, 0x05 }, + { ADCX140_ASI_CH7, 0x06 }, + { ADCX140_ASI_CH8, 0x07 }, + { ADCX140_MST_CFG0, 0x02 }, + { ADCX140_MST_CFG1, 0x48 }, + { ADCX140_ASI_STS, 0xff }, + { ADCX140_CLK_SRC, 0x10 }, + { ADCX140_PDMCLK_CFG, 0x40 }, + { ADCX140_PDM_CFG, 0x00 }, + { ADCX140_GPIO_CFG0, 0x22 }, + { ADCX140_GPO_CFG1, 0x00 }, + { ADCX140_GPO_CFG2, 0x00 }, + { ADCX140_GPO_CFG3, 0x00 }, + { ADCX140_GPO_CFG4, 0x00 }, + { ADCX140_GPO_VAL, 0x00 }, + { ADCX140_GPIO_MON, 0x00 }, + { ADCX140_GPI_CFG0, 0x00 }, + { ADCX140_GPI_CFG1, 0x00 }, + { ADCX140_GPI_MON, 0x00 }, + { ADCX140_INT_CFG, 0x00 }, + { ADCX140_INT_MASK0, 0xff }, + { ADCX140_INT_LTCH0, 0x00 }, + { ADCX140_BIAS_CFG, 0x00 }, + { ADCX140_CH1_CFG0, 0x00 }, + { ADCX140_CH1_CFG1, 0x00 }, + { ADCX140_CH1_CFG2, 0xc9 }, + { ADCX140_CH1_CFG3, 0x80 }, + { ADCX140_CH1_CFG4, 0x00 }, + { ADCX140_CH2_CFG0, 0x00 }, + { ADCX140_CH2_CFG1, 0x00 }, + { ADCX140_CH2_CFG2, 0xc9 }, + { ADCX140_CH2_CFG3, 0x80 }, + { ADCX140_CH2_CFG4, 0x00 }, + { ADCX140_CH3_CFG0, 0x00 }, + { ADCX140_CH3_CFG1, 0x00 }, + { ADCX140_CH3_CFG2, 0xc9 }, + { ADCX140_CH3_CFG3, 0x80 }, + { ADCX140_CH3_CFG4, 0x00 }, + { ADCX140_CH4_CFG0, 0x00 }, + { ADCX140_CH4_CFG1, 0x00 }, + { ADCX140_CH4_CFG2, 0xc9 }, + { ADCX140_CH4_CFG3, 0x80 }, + { ADCX140_CH4_CFG4, 0x00 }, + { ADCX140_CH5_CFG2, 0xc9 }, + { ADCX140_CH5_CFG3, 0x80 }, + { ADCX140_CH5_CFG4, 0x00 }, + { ADCX140_CH6_CFG2, 0xc9 }, + { ADCX140_CH6_CFG3, 0x80 }, + { ADCX140_CH6_CFG4, 0x00 }, + { ADCX140_CH7_CFG2, 0xc9 }, + { ADCX140_CH7_CFG3, 0x80 }, + { ADCX140_CH7_CFG4, 0x00 }, + { ADCX140_CH8_CFG2, 0xc9 }, + { ADCX140_CH8_CFG3, 0x80 }, + { ADCX140_CH8_CFG4, 0x00 }, + { ADCX140_DSP_CFG0, 0x01 }, + { ADCX140_DSP_CFG1, 0x40 }, + { ADCX140_DRE_CFG0, 0x7b }, + { ADCX140_IN_CH_EN, 0xf0 }, + { ADCX140_ASI_OUT_CH_EN, 0x00 }, + { ADCX140_PWR_CFG, 0x00 }, + { ADCX140_DEV_STS0, 0x00 }, + { ADCX140_DEV_STS1, 0x80 }, +}; + +static const struct regmap_range_cfg adcx140_ranges[] = { + { + .range_min = 0, + .range_max = 12 * 128, + .selector_reg = ADCX140_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 128, + }, +}; + +static bool adcx140_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ADCX140_SW_RESET: + case ADCX140_DEV_STS0: + case ADCX140_DEV_STS1: + case ADCX140_ASI_STS: + return true; + default: + return false; + } +} + +static const struct regmap_config adcx140_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + .reg_defaults = adcx140_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(adcx140_reg_defaults), + .cache_type = REGCACHE_FLAT, + .ranges = adcx140_ranges, + .num_ranges = ARRAY_SIZE(adcx140_ranges), + .max_register = 12 * 128, + .volatile_reg = adcx140_volatile, +}; + +/* Digital Volume control. From -100 to 27 dB in 0.5 dB steps */ +static DECLARE_TLV_DB_SCALE(dig_vol_tlv, -10000, 50, 0); + +/* ADC gain. From 0 to 42 dB in 1 dB steps */ +static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 100, 0); + +static const char * const resistor_text[] = { + "2.5 kOhm", "10 kOhm", "20 kOhm" +}; + +static SOC_ENUM_SINGLE_DECL(in1_resistor_enum, ADCX140_CH1_CFG0, 2, + resistor_text); +static SOC_ENUM_SINGLE_DECL(in2_resistor_enum, ADCX140_CH2_CFG0, 2, + resistor_text); +static SOC_ENUM_SINGLE_DECL(in3_resistor_enum, ADCX140_CH3_CFG0, 2, + resistor_text); +static SOC_ENUM_SINGLE_DECL(in4_resistor_enum, ADCX140_CH4_CFG0, 2, + resistor_text); + +static const struct snd_kcontrol_new in1_resistor_controls[] = { + SOC_DAPM_ENUM("CH1 Resistor Select", in1_resistor_enum), +}; +static const struct snd_kcontrol_new in2_resistor_controls[] = { + SOC_DAPM_ENUM("CH2 Resistor Select", in2_resistor_enum), +}; +static const struct snd_kcontrol_new in3_resistor_controls[] = { + SOC_DAPM_ENUM("CH3 Resistor Select", in3_resistor_enum), +}; +static const struct snd_kcontrol_new in4_resistor_controls[] = { + SOC_DAPM_ENUM("CH4 Resistor Select", in4_resistor_enum), +}; + +/* Analog/Digital Selection */ +static const char *adcx140_mic_sel_text[] = {"Analog", "Line In", "Digital"}; +static const char *adcx140_analog_sel_text[] = {"Analog", "Line In"}; + +static SOC_ENUM_SINGLE_DECL(adcx140_mic1p_enum, + ADCX140_CH1_CFG0, 5, + adcx140_mic_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic1p_control = +SOC_DAPM_ENUM("MIC1P MUX", adcx140_mic1p_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic1_analog_enum, + ADCX140_CH1_CFG0, 7, + adcx140_analog_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic1_analog_control = +SOC_DAPM_ENUM("MIC1 Analog MUX", adcx140_mic1_analog_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic1m_enum, + ADCX140_CH1_CFG0, 5, + adcx140_mic_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic1m_control = +SOC_DAPM_ENUM("MIC1M MUX", adcx140_mic1m_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic2p_enum, + ADCX140_CH2_CFG0, 5, + adcx140_mic_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic2p_control = +SOC_DAPM_ENUM("MIC2P MUX", adcx140_mic2p_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic2_analog_enum, + ADCX140_CH2_CFG0, 7, + adcx140_analog_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic2_analog_control = +SOC_DAPM_ENUM("MIC2 Analog MUX", adcx140_mic2_analog_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic2m_enum, + ADCX140_CH2_CFG0, 5, + adcx140_mic_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic2m_control = +SOC_DAPM_ENUM("MIC2M MUX", adcx140_mic2m_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic3p_enum, + ADCX140_CH3_CFG0, 5, + adcx140_mic_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic3p_control = +SOC_DAPM_ENUM("MIC3P MUX", adcx140_mic3p_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic3_analog_enum, + ADCX140_CH3_CFG0, 7, + adcx140_analog_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic3_analog_control = +SOC_DAPM_ENUM("MIC3 Analog MUX", adcx140_mic3_analog_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic3m_enum, + ADCX140_CH3_CFG0, 5, + adcx140_mic_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic3m_control = +SOC_DAPM_ENUM("MIC3M MUX", adcx140_mic3m_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic4p_enum, + ADCX140_CH4_CFG0, 5, + adcx140_mic_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic4p_control = +SOC_DAPM_ENUM("MIC4P MUX", adcx140_mic4p_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic4_analog_enum, + ADCX140_CH4_CFG0, 7, + adcx140_analog_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic4_analog_control = +SOC_DAPM_ENUM("MIC4 Analog MUX", adcx140_mic4_analog_enum); + +static SOC_ENUM_SINGLE_DECL(adcx140_mic4m_enum, + ADCX140_CH4_CFG0, 5, + adcx140_mic_sel_text); + +static const struct snd_kcontrol_new adcx140_dapm_mic4m_control = +SOC_DAPM_ENUM("MIC4M MUX", adcx140_mic4m_enum); + +static const struct snd_kcontrol_new adcx140_dapm_ch1_en_switch = + SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 7, 1, 0); +static const struct snd_kcontrol_new adcx140_dapm_ch2_en_switch = + SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 6, 1, 0); +static const struct snd_kcontrol_new adcx140_dapm_ch3_en_switch = + SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 5, 1, 0); +static const struct snd_kcontrol_new adcx140_dapm_ch4_en_switch = + SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 4, 1, 0); + +/* Output Mixer */ +static const struct snd_kcontrol_new adcx140_output_mixer_controls[] = { + SOC_DAPM_SINGLE("Digital CH1 Switch", 0, 0, 0, 0), + SOC_DAPM_SINGLE("Digital CH2 Switch", 0, 0, 0, 0), + SOC_DAPM_SINGLE("Digital CH3 Switch", 0, 0, 0, 0), + SOC_DAPM_SINGLE("Digital CH4 Switch", 0, 0, 0, 0), +}; + +static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = { + /* Analog Differential Inputs */ + SND_SOC_DAPM_INPUT("MIC1P"), + SND_SOC_DAPM_INPUT("MIC1M"), + SND_SOC_DAPM_INPUT("MIC2P"), + SND_SOC_DAPM_INPUT("MIC2M"), + SND_SOC_DAPM_INPUT("MIC3P"), + SND_SOC_DAPM_INPUT("MIC3M"), + SND_SOC_DAPM_INPUT("MIC4P"), + SND_SOC_DAPM_INPUT("MIC4M"), + + SND_SOC_DAPM_OUTPUT("CH1_OUT"), + SND_SOC_DAPM_OUTPUT("CH2_OUT"), + SND_SOC_DAPM_OUTPUT("CH3_OUT"), + SND_SOC_DAPM_OUTPUT("CH4_OUT"), + SND_SOC_DAPM_OUTPUT("CH5_OUT"), + SND_SOC_DAPM_OUTPUT("CH6_OUT"), + SND_SOC_DAPM_OUTPUT("CH7_OUT"), + SND_SOC_DAPM_OUTPUT("CH8_OUT"), + + SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0, + &adcx140_output_mixer_controls[0], + ARRAY_SIZE(adcx140_output_mixer_controls)), + + /* Input Selection to MIC_PGA */ + SND_SOC_DAPM_MUX("MIC1P Input Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic1p_control), + SND_SOC_DAPM_MUX("MIC2P Input Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic2p_control), + SND_SOC_DAPM_MUX("MIC3P Input Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic3p_control), + SND_SOC_DAPM_MUX("MIC4P Input Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic4p_control), + + /* Input Selection to MIC_PGA */ + SND_SOC_DAPM_MUX("MIC1 Analog Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic1_analog_control), + SND_SOC_DAPM_MUX("MIC2 Analog Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic2_analog_control), + SND_SOC_DAPM_MUX("MIC3 Analog Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic3_analog_control), + SND_SOC_DAPM_MUX("MIC4 Analog Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic4_analog_control), + + SND_SOC_DAPM_MUX("MIC1M Input Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic1m_control), + SND_SOC_DAPM_MUX("MIC2M Input Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic2m_control), + SND_SOC_DAPM_MUX("MIC3M Input Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic3m_control), + SND_SOC_DAPM_MUX("MIC4M Input Mux", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_mic4m_control), + + SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH1", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH2", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH3", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH4", SND_SOC_NOPM, 0, 0, NULL, 0), + + SND_SOC_DAPM_ADC("CH1_ADC", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0), + SND_SOC_DAPM_ADC("CH2_ADC", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0), + SND_SOC_DAPM_ADC("CH3_ADC", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0), + SND_SOC_DAPM_ADC("CH4_ADC", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0), + + SND_SOC_DAPM_SWITCH("CH1_ASI_EN", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_ch1_en_switch), + SND_SOC_DAPM_SWITCH("CH2_ASI_EN", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_ch2_en_switch), + SND_SOC_DAPM_SWITCH("CH3_ASI_EN", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_ch3_en_switch), + SND_SOC_DAPM_SWITCH("CH4_ASI_EN", SND_SOC_NOPM, 0, 0, + &adcx140_dapm_ch4_en_switch), + + SND_SOC_DAPM_MUX("IN1 Analog Mic Resistor", SND_SOC_NOPM, 0, 0, + in1_resistor_controls), + SND_SOC_DAPM_MUX("IN2 Analog Mic Resistor", SND_SOC_NOPM, 0, 0, + in2_resistor_controls), + SND_SOC_DAPM_MUX("IN3 Analog Mic Resistor", SND_SOC_NOPM, 0, 0, + in3_resistor_controls), + SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0, + in4_resistor_controls), +}; + +static const struct snd_soc_dapm_route adcx140_audio_map[] = { + /* Outputs */ + {"CH1_OUT", NULL, "Output Mixer"}, + {"CH2_OUT", NULL, "Output Mixer"}, + {"CH3_OUT", NULL, "Output Mixer"}, + {"CH4_OUT", NULL, "Output Mixer"}, + + {"CH1_ASI_EN", "Switch", "CH1_ADC"}, + {"CH2_ASI_EN", "Switch", "CH2_ADC"}, + {"CH3_ASI_EN", "Switch", "CH3_ADC"}, + {"CH4_ASI_EN", "Switch", "CH4_ADC"}, + + /* Mic input */ + {"CH1_ADC", NULL, "MIC_GAIN_CTL_CH1"}, + {"CH2_ADC", NULL, "MIC_GAIN_CTL_CH2"}, + {"CH3_ADC", NULL, "MIC_GAIN_CTL_CH3"}, + {"CH4_ADC", NULL, "MIC_GAIN_CTL_CH4"}, + + {"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"}, + {"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"}, + {"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"}, + {"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"}, + {"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"}, + {"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"}, + {"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"}, + {"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"}, + + {"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1P Input Mux"}, + {"IN1 Analog Mic Resistor", "10 kOhm", "MIC1P Input Mux"}, + {"IN1 Analog Mic Resistor", "20 kOhm", "MIC1P Input Mux"}, + + {"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1M Input Mux"}, + {"IN1 Analog Mic Resistor", "10 kOhm", "MIC1M Input Mux"}, + {"IN1 Analog Mic Resistor", "20 kOhm", "MIC1M Input Mux"}, + + {"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2P Input Mux"}, + {"IN2 Analog Mic Resistor", "10 kOhm", "MIC2P Input Mux"}, + {"IN2 Analog Mic Resistor", "20 kOhm", "MIC2P Input Mux"}, + + {"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2M Input Mux"}, + {"IN2 Analog Mic Resistor", "10 kOhm", "MIC2M Input Mux"}, + {"IN2 Analog Mic Resistor", "20 kOhm", "MIC2M Input Mux"}, + + {"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3P Input Mux"}, + {"IN3 Analog Mic Resistor", "10 kOhm", "MIC3P Input Mux"}, + {"IN3 Analog Mic Resistor", "20 kOhm", "MIC3P Input Mux"}, + + {"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3M Input Mux"}, + {"IN3 Analog Mic Resistor", "10 kOhm", "MIC3M Input Mux"}, + {"IN3 Analog Mic Resistor", "20 kOhm", "MIC3M Input Mux"}, + + {"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4P Input Mux"}, + {"IN4 Analog Mic Resistor", "10 kOhm", "MIC4P Input Mux"}, + {"IN4 Analog Mic Resistor", "20 kOhm", "MIC4P Input Mux"}, + + {"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4M Input Mux"}, + {"IN4 Analog Mic Resistor", "10 kOhm", "MIC4M Input Mux"}, + {"IN4 Analog Mic Resistor", "20 kOhm", "MIC4M Input Mux"}, + + {"MIC1 Analog Mux", "Line In", "MIC1P"}, + {"MIC2 Analog Mux", "Line In", "MIC2P"}, + {"MIC3 Analog Mux", "Line In", "MIC3P"}, + {"MIC4 Analog Mux", "Line In", "MIC4P"}, + + {"MIC1P Input Mux", "Analog", "MIC1P"}, + {"MIC1M Input Mux", "Analog", "MIC1M"}, + {"MIC2P Input Mux", "Analog", "MIC2P"}, + {"MIC2M Input Mux", "Analog", "MIC2M"}, + {"MIC3P Input Mux", "Analog", "MIC3P"}, + {"MIC3M Input Mux", "Analog", "MIC3M"}, + {"MIC4P Input Mux", "Analog", "MIC4P"}, + {"MIC4M Input Mux", "Analog", "MIC4M"}, +}; + +static const struct snd_kcontrol_new adcx140_snd_controls[] = { + SOC_SINGLE_TLV("Analog CH1 Mic Gain Volume", ADCX140_CH1_CFG1, 2, 42, 0, + adc_tlv), + SOC_SINGLE_TLV("Analog CH2 Mic Gain Volume", ADCX140_CH1_CFG2, 2, 42, 0, + adc_tlv), + SOC_SINGLE_TLV("Analog CH3 Mic Gain Volume", ADCX140_CH1_CFG3, 2, 42, 0, + adc_tlv), + SOC_SINGLE_TLV("Analog CH4 Mic Gain Volume", ADCX140_CH1_CFG4, 2, 42, 0, + adc_tlv), + + SOC_SINGLE_TLV("Digital CH1 Out Volume", ADCX140_CH1_CFG2, + 0, 0xff, 0, dig_vol_tlv), + SOC_SINGLE_TLV("Digital CH2 Out Volume", ADCX140_CH2_CFG2, + 0, 0xff, 0, dig_vol_tlv), + SOC_SINGLE_TLV("Digital CH3 Out Volume", ADCX140_CH3_CFG2, + 0, 0xff, 0, dig_vol_tlv), + SOC_SINGLE_TLV("Digital CH4 Out Volume", ADCX140_CH4_CFG2, + 0, 0xff, 0, dig_vol_tlv), + SOC_SINGLE_TLV("Digital CH5 Out Volume", ADCX140_CH5_CFG2, + 0, 0xff, 0, dig_vol_tlv), + SOC_SINGLE_TLV("Digital CH6 Out Volume", ADCX140_CH6_CFG2, + 0, 0xff, 0, dig_vol_tlv), + SOC_SINGLE_TLV("Digital CH7 Out Volume", ADCX140_CH7_CFG2, + 0, 0xff, 0, dig_vol_tlv), + SOC_SINGLE_TLV("Digital CH8 Out Volume", ADCX140_CH8_CFG2, + 0, 0xff, 0, dig_vol_tlv), +}; + +static int adcx140_reset(struct adcx140_priv *adcx140) +{ + int ret = 0; + + if (adcx140->gpio_reset) { + gpiod_direction_output(adcx140->gpio_reset, 0); + /* 8.4.1: wait for hw shutdown (25ms) + >= 1ms */ + usleep_range(30000, 100000); + gpiod_direction_output(adcx140->gpio_reset, 1); + } else { + ret = regmap_write(adcx140->regmap, ADCX140_SW_RESET, + ADCX140_RESET); + } + + /* 8.4.2: wait >= 10 ms after entering sleep mode. */ + usleep_range(10000, 100000); + + return 0; +} + +static int adcx140_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + u8 data = 0; + + switch (params_width(params)) { + case 16: + data = ADCX140_16_BIT_WORD; + break; + case 20: + data = ADCX140_20_BIT_WORD; + break; + case 24: + data = ADCX140_24_BIT_WORD; + break; + case 32: + data = ADCX140_32_BIT_WORD; + break; + default: + dev_err(component->dev, "%s: Unsupported width %d\n", + __func__, params_width(params)); + return -EINVAL; + } + + snd_soc_component_update_bits(component, ADCX140_ASI_CFG0, + ADCX140_WORD_LEN_MSK, data); + + return 0; +} + +static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + u8 iface_reg1 = 0; + u8 iface_reg2 = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBS_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + default: + dev_err(component->dev, "Invalid DAI master/slave interface\n"); + return -EINVAL; + } + + /* signal polarity */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_IF: + iface_reg1 |= ADCX140_FSYNCINV_BIT; + break; + case SND_SOC_DAIFMT_IB_IF: + iface_reg1 |= ADCX140_BCLKINV_BIT | ADCX140_FSYNCINV_BIT; + break; + case SND_SOC_DAIFMT_IB_NF: + iface_reg1 |= ADCX140_BCLKINV_BIT; + break; + case SND_SOC_DAIFMT_NB_NF: + break; + default: + dev_err(component->dev, "Invalid DAI clock signal polarity\n"); + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface_reg1 |= ADCX140_I2S_MODE_BIT; + break; + case SND_SOC_DAIFMT_LEFT_J: + iface_reg1 |= ADCX140_LEFT_JUST_BIT; + break; + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + break; + default: + dev_err(component->dev, "Invalid DAI interface format\n"); + return -EINVAL; + } + + snd_soc_component_update_bits(component, ADCX140_ASI_CFG0, + ADCX140_BCLKINV_BIT | + ADCX140_ASI_FORMAT_MSK, + iface_reg1); + snd_soc_component_update_bits(component, ADCX140_MST_CFG0, + ADCX140_BCLK_FSYNC_MASTER, iface_reg2); + + return 0; +} + +static int adcx140_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_component *component = codec_dai->component; + int config_reg; + int mic_enable; + int i; + + /* There is not a single register to mute. Each enabled path has to be + * muted individually. Read which path is enabled and mute it. + */ + snd_soc_component_read(component, ADCX140_IN_CH_EN, &mic_enable); + if (!mic_enable) + return 0; + + for (i = 0; i < ADCX140_MAX_CHANNELS; i++) { + config_reg = ADCX140_CH8_CFG2 - (5 * i); + if (!(mic_enable & BIT(i))) + continue; + + if (mute) + snd_soc_component_write(component, config_reg, 0); + } + + return 0; +} + +static const struct snd_soc_dai_ops adcx140_dai_ops = { + .hw_params = adcx140_hw_params, + .set_fmt = adcx140_set_dai_fmt, + .digital_mute = adcx140_mute, +}; + +static int adc5410_init(struct adcx140_priv *adcx140) +{ + bool internal_reg; + int sleep_cfg_val = ADCX140_WAKE_DEV; + u8 bias_source; + int ret; + + internal_reg = device_property_present(adcx140->dev, + "ti,use-internal-areg"); + + if (internal_reg) + sleep_cfg_val |= ADCX140_AREG_INTERNAL; + + ret = device_property_read_u8(adcx140->dev, "ti,mic-bias-source", + &bias_source); + if (ret) + bias_source = ADCX140_MIC_BIAS_VAL_VREF; + + if (bias_source != ADCX140_MIC_BIAS_VAL_VREF && + bias_source != ADCX140_MIC_BIAS_VAL_VREF_1096 && + bias_source != ADCX140_MIC_BIAS_VAL_AVDD) { + dev_err(adcx140->dev, "Mic Bias source value is invalid\n"); + return -EINVAL; + } + + ret = adcx140_reset(adcx140); + if (ret) + goto out; + + ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG, sleep_cfg_val); + if (ret) { + dev_err(adcx140->dev, "setting sleep config failed %d\n", ret); + goto out; + } + + /* 8.4.3: Wait >= 1ms after entering active mode. */ + usleep_range(1000, 100000); + + ret = regmap_update_bits(adcx140->regmap, ADCX140_BIAS_CFG, + ADCX140_MIC_BIAS_VAL_MSK, bias_source); + if (ret) + dev_err(adcx140->dev, "setting MIC bias failed %d\n", ret); +out: + return ret; +} + +static int adcx140_codec_probe(struct snd_soc_component *component) +{ + struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component); + + return adc5410_init(adcx140); +} + +static int adcx140_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component); + int pwr_cfg = 0; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + case SND_SOC_BIAS_STANDBY: + pwr_cfg = ADCx140_PWR_CFG_BIAS_PDZ | ADCx140_PWR_CFG_PLL_PDZ | + ADCx140_PWR_CFG_ADC_PDZ; + break; + case SND_SOC_BIAS_OFF: + pwr_cfg = 0x0; + break; + } + + return regmap_write(adcx140->regmap, ADCX140_PWR_CFG, pwr_cfg); +} + +static const struct snd_soc_component_driver soc_codec_driver_adcx140 = { + .probe = adcx140_codec_probe, + .set_bias_level = adcx140_set_bias_level, + .controls = adcx140_snd_controls, + .num_controls = ARRAY_SIZE(adcx140_snd_controls), + .dapm_widgets = adcx140_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(adcx140_dapm_widgets), + .dapm_routes = adcx140_audio_map, + .num_dapm_routes = ARRAY_SIZE(adcx140_audio_map), + .suspend_bias_off = 1, + .idle_bias_on = 0, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static struct snd_soc_dai_driver adcx140_dai_driver[] = { + { + .name = "tlv320adcx140-codec", + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = ADCX140_MAX_CHANNELS, + .rates = ADCX140_RATES, + .formats = ADCX140_FORMATS, + }, + .ops = &adcx140_dai_ops, + .symmetric_rates = 1, + } +}; + +static const struct of_device_id tlv320adcx140_of_match[] = { + { .compatible = "ti,tlv320adc3140" }, + { .compatible = "ti,tlv320adc5140" }, + { .compatible = "ti,tlv320adc6140" }, + {}, +}; +MODULE_DEVICE_TABLE(of, tlv320adcx140_of_match); + +static int adcx140_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct adcx140_priv *adcx140; + int ret; + + adcx140 = devm_kzalloc(&i2c->dev, sizeof(*adcx140), GFP_KERNEL); + if (!adcx140) + return -ENOMEM; + + adcx140->gpio_reset = devm_gpiod_get_optional(adcx140->dev, + "reset", GPIOD_OUT_LOW); + if (IS_ERR(adcx140->gpio_reset)) + dev_info(&i2c->dev, "Reset GPIO not defined\n"); + + adcx140->regmap = devm_regmap_init_i2c(i2c, &adcx140_i2c_regmap); + if (IS_ERR(adcx140->regmap)) { + ret = PTR_ERR(adcx140->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + adcx140->dev = &i2c->dev; + i2c_set_clientdata(i2c, adcx140); + + return devm_snd_soc_register_component(&i2c->dev, + &soc_codec_driver_adcx140, + adcx140_dai_driver, 1); +} + +static const struct i2c_device_id adcx140_i2c_id[] = { + { "tlv320adc3140", 0 }, + { "tlv320adc5140", 1 }, + { "tlv320adc6140", 2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, adcx140_i2c_id); + +static struct i2c_driver adcx140_i2c_driver = { + .driver = { + .name = "tlv320adcx140-codec", + .of_match_table = of_match_ptr(tlv320adcx140_of_match), + }, + .probe = adcx140_i2c_probe, + .id_table = adcx140_i2c_id, +}; +module_i2c_driver(adcx140_i2c_driver); + +MODULE_AUTHOR("Dan Murphy dmurphy@ti.com"); +MODULE_DESCRIPTION("ASoC TLV320ADCX140 CODEC Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/tlv320adcx140.h b/sound/soc/codecs/tlv320adcx140.h new file mode 100644 index 000000000000..b1a49a03d8f4 --- /dev/null +++ b/sound/soc/codecs/tlv320adcx140.h @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 +// TLV320ADCX104 Sound driver +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + +#ifndef _TLV320ADCX140_H +#define _TLV320ADCX140_H + +#define ADCX140_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000) + +#define ADCX140_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +#define ADCX140_PAGE_SELECT 0x00 +#define ADCX140_SW_RESET 0x01 +#define ADCX140_SLEEP_CFG 0x02 +#define ADCX140_SHDN_CFG 0x05 +#define ADCX140_ASI_CFG0 0x07 +#define ADCX140_ASI_CFG1 0x08 +#define ADCX140_ASI_CFG2 0x09 +#define ADCX140_ASI_CH1 0x0b +#define ADCX140_ASI_CH2 0x0c +#define ADCX140_ASI_CH3 0x0d +#define ADCX140_ASI_CH4 0x0e +#define ADCX140_ASI_CH5 0x0f +#define ADCX140_ASI_CH6 0x10 +#define ADCX140_ASI_CH7 0x11 +#define ADCX140_ASI_CH8 0x12 +#define ADCX140_MST_CFG0 0x13 +#define ADCX140_MST_CFG1 0x14 +#define ADCX140_ASI_STS 0x15 +#define ADCX140_CLK_SRC 0x16 +#define ADCX140_PDMCLK_CFG 0x1f +#define ADCX140_PDM_CFG 0x20 +#define ADCX140_GPIO_CFG0 0x21 +#define ADCX140_GPO_CFG1 0x22 +#define ADCX140_GPO_CFG2 0x23 +#define ADCX140_GPO_CFG3 0x24 +#define ADCX140_GPO_CFG4 0x25 +#define ADCX140_GPO_VAL 0x29 +#define ADCX140_GPIO_MON 0x2a +#define ADCX140_GPI_CFG0 0x2b +#define ADCX140_GPI_CFG1 0x2c +#define ADCX140_GPI_MON 0x2f +#define ADCX140_INT_CFG 0x32 +#define ADCX140_INT_MASK0 0x33 +#define ADCX140_INT_LTCH0 0x36 +#define ADCX140_BIAS_CFG 0x3b +#define ADCX140_CH1_CFG0 0x3c +#define ADCX140_CH1_CFG1 0x3d +#define ADCX140_CH1_CFG2 0x3e +#define ADCX140_CH1_CFG3 0x3f +#define ADCX140_CH1_CFG4 0x40 +#define ADCX140_CH2_CFG0 0x41 +#define ADCX140_CH2_CFG1 0x42 +#define ADCX140_CH2_CFG2 0x43 +#define ADCX140_CH2_CFG3 0x44 +#define ADCX140_CH2_CFG4 0x45 +#define ADCX140_CH3_CFG0 0x46 +#define ADCX140_CH3_CFG1 0x47 +#define ADCX140_CH3_CFG2 0x48 +#define ADCX140_CH3_CFG3 0x49 +#define ADCX140_CH3_CFG4 0x4a +#define ADCX140_CH4_CFG0 0x4b +#define ADCX140_CH4_CFG1 0x4c +#define ADCX140_CH4_CFG2 0x4d +#define ADCX140_CH4_CFG3 0x4e +#define ADCX140_CH4_CFG4 0x4f +#define ADCX140_CH5_CFG2 0x52 +#define ADCX140_CH5_CFG3 0x53 +#define ADCX140_CH5_CFG4 0x54 +#define ADCX140_CH6_CFG2 0x57 +#define ADCX140_CH6_CFG3 0x58 +#define ADCX140_CH6_CFG4 0x59 +#define ADCX140_CH7_CFG2 0x5c +#define ADCX140_CH7_CFG3 0x5d +#define ADCX140_CH7_CFG4 0x5e +#define ADCX140_CH8_CFG2 0x61 +#define ADCX140_CH8_CFG3 0x62 +#define ADCX140_CH8_CFG4 0x63 +#define ADCX140_DSP_CFG0 0x6b +#define ADCX140_DSP_CFG1 0x6c +#define ADCX140_DRE_CFG0 0x6d +#define ADCX140_IN_CH_EN 0x73 +#define ADCX140_ASI_OUT_CH_EN 0x74 +#define ADCX140_PWR_CFG 0x75 +#define ADCX140_DEV_STS0 0x76 +#define ADCX140_DEV_STS1 0x77 + +#define ADCX140_RESET BIT(0) + +#define ADCX140_WAKE_DEV BIT(0) +#define ADCX140_AREG_INTERNAL BIT(7) + +#define ADCX140_BCLKINV_BIT BIT(2) +#define ADCX140_FSYNCINV_BIT BIT(3) +#define ADCX140_INV_MSK (ADCX140_BCLKINV_BIT | ADCX140_FSYNCINV_BIT) +#define ADCX140_BCLK_FSYNC_MASTER BIT(7) +#define ADCX140_I2S_MODE_BIT BIT(6) +#define ADCX140_LEFT_JUST_BIT BIT(7) +#define ADCX140_ASI_FORMAT_MSK (ADCX140_I2S_MODE_BIT | ADCX140_LEFT_JUST_BIT) + +#define ADCX140_16_BIT_WORD 0x0 +#define ADCX140_20_BIT_WORD BIT(4) +#define ADCX140_24_BIT_WORD BIT(5) +#define ADCX140_32_BIT_WORD (BIT(4) | BIT(5)) +#define ADCX140_WORD_LEN_MSK 0x30 + +#define ADCX140_MAX_CHANNELS 8 + +#define ADCX140_MIC_BIAS_VAL_VREF 0 +#define ADCX140_MIC_BIAS_VAL_VREF_1096 1 +#define ADCX140_MIC_BIAS_VAL_AVDD 6 +#define ADCX140_MIC_BIAS_VAL_MSK GENMASK(6, 4) + +#define ADCx140_PWR_CFG_BIAS_PDZ BIT(7) +#define ADCx140_PWR_CFG_ADC_PDZ BIT(6) +#define ADCx140_PWR_CFG_PLL_PDZ BIT(5) + +#endif /* _TLV320ADCX140_ */
On Fri, Feb 07, 2020 at 01:45:33PM -0600, Dan Murphy wrote:
- /* interface format */
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
iface_reg1 |= ADCX140_I2S_MODE_BIT;
break;
- case SND_SOC_DAIFMT_LEFT_J:
iface_reg1 |= ADCX140_LEFT_JUST_BIT;
break;
- case SND_SOC_DAIFMT_DSP_A:
- case SND_SOC_DAIFMT_DSP_B:
break;
_DSP_A and _DSP_B are two different format so I'd expect the device to be configured differently for them, or for only one to be supported.
+static int adcx140_mute(struct snd_soc_dai *codec_dai, int mute) +{
- struct snd_soc_component *component = codec_dai->component;
- int config_reg;
- int mic_enable;
- int i;
- /* There is not a single register to mute. Each enabled path has to be
* muted individually. Read which path is enabled and mute it.
*/
- snd_soc_component_read(component, ADCX140_IN_CH_EN, &mic_enable);
- if (!mic_enable)
return 0;
You could also just offer this control to userspace, it's not *essential* to have this operation though it can help with glitching during stream startup.
- for (i = 0; i < ADCX140_MAX_CHANNELS; i++) {
config_reg = ADCX140_CH8_CFG2 - (5 * i);
if (!(mic_enable & BIT(i)))
continue;
if (mute)
snd_soc_component_write(component, config_reg, 0);
- }
How does the unmute work?
- internal_reg = device_property_present(adcx140->dev,
"ti,use-internal-areg");
- if (internal_reg)
sleep_cfg_val |= ADCX140_AREG_INTERNAL;
Does this actually need a specific property or could you support the regulator API and then use regulator_get_optional() to figure out if an external AVDD is attached?
+static int adcx140_codec_probe(struct snd_soc_component *component) +{
- struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
- return adc5410_init(adcx140);
+}
Does the separate init function buy us anything?
Mark
Thanks for the review
On 2/10/20 7:52 AM, Mark Brown wrote:
On Fri, Feb 07, 2020 at 01:45:33PM -0600, Dan Murphy wrote:
- /* interface format */
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
iface_reg1 |= ADCX140_I2S_MODE_BIT;
break;
- case SND_SOC_DAIFMT_LEFT_J:
iface_reg1 |= ADCX140_LEFT_JUST_BIT;
break;
- case SND_SOC_DAIFMT_DSP_A:
- case SND_SOC_DAIFMT_DSP_B:
break;
_DSP_A and _DSP_B are two different format so I'd expect the device to be configured differently for them, or for only one to be supported.
Ack. I will need to adjust the TX offset for these. I will do add a prepare call back and set the offset there. These can fall through since TDM is default.
+static int adcx140_mute(struct snd_soc_dai *codec_dai, int mute) +{
- struct snd_soc_component *component = codec_dai->component;
- int config_reg;
- int mic_enable;
- int i;
- /* There is not a single register to mute. Each enabled path has to be
* muted individually. Read which path is enabled and mute it.
*/
- snd_soc_component_read(component, ADCX140_IN_CH_EN, &mic_enable);
- if (!mic_enable)
return 0;
You could also just offer this control to userspace, it's not *essential* to have this operation though it can help with glitching during stream startup.
- for (i = 0; i < ADCX140_MAX_CHANNELS; i++) {
config_reg = ADCX140_CH8_CFG2 - (5 * i);
if (!(mic_enable & BIT(i)))
continue;
if (mute)
snd_soc_component_write(component, config_reg, 0);
- }
How does the unmute work?
This is unmuted through volume control. I can remove this as the device is muted when the volume register is set to 0. That will force the user to have to set a volume.
- internal_reg = device_property_present(adcx140->dev,
"ti,use-internal-areg");
- if (internal_reg)
sleep_cfg_val |= ADCX140_AREG_INTERNAL;
Does this actually need a specific property or could you support the regulator API and then use regulator_get_optional() to figure out if an external AVDD is attached?
Yes we could set internal AREG bit if no supply is given.
+static int adcx140_codec_probe(struct snd_soc_component *component) +{
- struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
- return adc5410_init(adcx140);
+}
Does the separate init function buy us anything?
No that is an artifact of my development I can move everything to codec_probe
Dan
participants (2)
-
Dan Murphy
-
Mark Brown