There have been reports of USB-audio driver spewing errors at the probe time on a few devices like Jabra and Logitech. The suggested fix there couldn't be applied as is, unfortunately, because it'll likely break other devices.

But, the patch suggested an interesting point: looking at the current init code in stream.c, one may notice that it does initialize differently from the device setup in endpoint.c. Namely, for UAC1, we should call snd_usb_init_pitch() and snd_usb_init_sample_rate() after setting the interface, while the init sequence at parsing calls them before setting the interface blindly.

This patch changes the init sequence at parsing for UAC1 (and other devices that need a similar behavior) to be aligned with the rest of the code, setting the interface at first. And, this fixes the long-standing problems on a few UAC1 devices like Jabra / Logitech, as reported, too.

Reported-and-tested-by: Joakim Tjernlund joakim.tjernlund@infinera.com Closes: https://lore.kernel.org/r/202bbbc0f51522e8545783c4c5577d12a8e2d56d.camel@inf... Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/usb/stream.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/sound/usb/stream.c b/sound/usb/stream.c index f10f4e6d3fb8..3d4add94e367 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -1093,6 +1093,7 @@ static int __snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int i, altno, err, stream; struct audioformat *fp = NULL; struct snd_usb_power_domain *pd = NULL; + bool set_iface_first; int num, protocol;

dev = chip->dev; @@ -1223,11 +1224,19 @@ static int __snd_usb_parse_audio_interface(struct snd_usb_audio *chip, return err; }

+ set_iface_first = false; + if (protocol == UAC_VERSION_1 || + (chip->quirk_flags & QUIRK_FLAG_SET_IFACE_FIRST)) + set_iface_first = true; + /* try to set the interface... */ usb_set_interface(chip->dev, iface_no, 0); + if (set_iface_first) + usb_set_interface(chip->dev, iface_no, altno); snd_usb_init_pitch(chip, fp); snd_usb_init_sample_rate(chip, fp, fp->rate_max); - usb_set_interface(chip->dev, iface_no, altno); + if (!set_iface_first) + usb_set_interface(chip->dev, iface_no, altno); } return 0; }