[alsa-devel] [PATCH] ASoC: intel: Fix crash at suspend/resume after failed codec registration
If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume.
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe
In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem.
max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1
The problem is similar to the problem solved with commit 2fc995a87f2e ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem.
Cc: stable@vger.kernel.org Cc: Jarkko Nikula jarkko.nikula@linux.intel.com Cc: Curtis Malainey cujomalainey@chromium.org Signed-off-by: Guenter Roeck linux@roeck-us.net --- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c index 08cea5b5cda9..0e8b1c5eec88 100644 --- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c +++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c @@ -706,9 +706,17 @@ static int sst_soc_probe(struct snd_soc_component *component) return sst_dsp_init_v2_dpcm(component); }
+static void sst_soc_remove(struct snd_soc_component *component) +{ + struct sst_data *drv = dev_get_drvdata(component->dev); + + drv->soc_card = NULL; +} + static const struct snd_soc_component_driver sst_soc_platform_drv = { .name = DRV_NAME, .probe = sst_soc_probe, + .remove = sst_soc_remove, .ops = &sst_platform_ops, .compr_ops = &sst_platform_compr_ops, .pcm_new = sst_pcm_new,
On 3/22/19 6:39 PM, Guenter Roeck wrote:
If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume.
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe
In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem.
max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1
The problem is similar to the problem solved with commit 2fc995a87f2e ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem.
Makes sense
Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
I'd like to highlight that there is a fundamental flaw in the way the machine drivers are handled. Since we don't have a hook for the machine driver in the BIOS, the DSP driver creates a platform_device which will instantiate the machine driver. When errors happen in the machine driver probe, they are suppressed due to a 'feature' of the device model, so you can end-up with a broken configuration that is still reported as a successful strobe.
Cc: stable@vger.kernel.org Cc: Jarkko Nikula jarkko.nikula@linux.intel.com Cc: Curtis Malainey cujomalainey@chromium.org Signed-off-by: Guenter Roeck linux@roeck-us.net
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c index 08cea5b5cda9..0e8b1c5eec88 100644 --- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c +++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c @@ -706,9 +706,17 @@ static int sst_soc_probe(struct snd_soc_component *component) return sst_dsp_init_v2_dpcm(component); }
+static void sst_soc_remove(struct snd_soc_component *component) +{
- struct sst_data *drv = dev_get_drvdata(component->dev);
- drv->soc_card = NULL;
+}
- static const struct snd_soc_component_driver sst_soc_platform_drv = { .name = DRV_NAME, .probe = sst_soc_probe,
- .remove = sst_soc_remove, .ops = &sst_platform_ops, .compr_ops = &sst_platform_compr_ops, .pcm_new = sst_pcm_new,
On Sat, Mar 23, 2019 at 09:55:46AM -0400, Pierre-Louis Bossart wrote:
I'd like to highlight that there is a fundamental flaw in the way the machine drivers are handled. Since we don't have a hook for the machine driver in the BIOS, the DSP driver creates a platform_device which will instantiate the machine driver. When errors happen in the machine driver probe, they are suppressed due to a 'feature' of the device model, so you can end-up with a broken configuration that is still reported as a successful strobe.
These are driver specific issues not device model issues as far as I can see? The issue fixed by this as is that you're storing a pointer in the ASoC level (not device model level) probe that you don't free when the component is unbound, causing you to dereference it later during suspend. There is absolutely no problem with the machine driver not being guaranteed to bind at the time it's initially registered, that's perfectly normal and should cause no problems.
On 3/25/19 8:12 AM, Mark Brown wrote:
On Sat, Mar 23, 2019 at 09:55:46AM -0400, Pierre-Louis Bossart wrote:
I'd like to highlight that there is a fundamental flaw in the way the machine drivers are handled. Since we don't have a hook for the machine driver in the BIOS, the DSP driver creates a platform_device which will instantiate the machine driver. When errors happen in the machine driver probe, they are suppressed due to a 'feature' of the device model, so you can end-up with a broken configuration that is still reported as a successful strobe.
These are driver specific issues not device model issues as far as I can see? The issue fixed by this as is that you're storing a pointer in the ASoC level (not device model level) probe that you don't free when the component is unbound, causing you to dereference it later during suspend. There is absolutely no problem with the machine driver not being guaranteed to bind at the time it's initially registered, that's perfectly normal and should cause no problems.
Agree, what I was referring is that if the machine probe and card registration fails (not just deferred), the parent acpi/pci driver isn't notified - there is just no means to provide that information and that leads to all kinds of configuration issues.
On Mon, Mar 25, 2019 at 09:18:04AM -0400, Pierre-Louis Bossart wrote:
On 3/25/19 8:12 AM, Mark Brown wrote:
These are driver specific issues not device model issues as far as I can see? The issue fixed by this as is that you're storing a pointer in the ASoC level (not device model level) probe that you don't free when the component is unbound, causing you to dereference it later during suspend. There is absolutely no problem with the machine driver not being guaranteed to bind at the time it's initially registered, that's perfectly normal and should cause no problems.
Agree, what I was referring is that if the machine probe and card registration fails (not just deferred), the parent acpi/pci driver isn't notified - there is just no means to provide that information and that leads to all kinds of configuration issues.
If there are issues here they could happen via means other than a probe failing so there's a problem whatever is going on - someone manually unbinding a device for example.
On 3/25/19 5:12 AM, Mark Brown wrote:
On Sat, Mar 23, 2019 at 09:55:46AM -0400, Pierre-Louis Bossart wrote:
I'd like to highlight that there is a fundamental flaw in the way the machine drivers are handled. Since we don't have a hook for the machine driver in the BIOS, the DSP driver creates a platform_device which will instantiate the machine driver. When errors happen in the machine driver probe, they are suppressed due to a 'feature' of the device model, so you can end-up with a broken configuration that is still reported as a successful strobe.
These are driver specific issues not device model issues as far as I can see? The issue fixed by this as is that you're storing a pointer in the ASoC level (not device model level) probe that you don't free when the component is unbound, causing you to dereference it later during suspend. There is absolutely no problem with the machine driver not being guaranteed to bind at the time it's initially registered, that's perfectly normal and should cause no problems.
It is actually a bit more complicated than that. The stored pointer (drv->soc_card) isn't released. The problem is that dev_get_drvdata(drv->soc_card->dev) is NULL, which causes the crash. I don't think there is a UAF involved - I built the test image with KASAN enabled and it did not barf at me.
It may of course well be that there _should_ be a UAF but it doesn't happen because some pointer that should be released isn't released due to some memory or reference count leak. But that would be a different problem.
Overall the implementation does seem a bit suspicious to me. I don't really understand why the platform driver handles suspend/resume for the cards. But that may just be my lack of understanding. However, either case, I think the Haswell driver (sst-haswell-pcm.c) has a similar problem. I am also not sure if there are more problems lurking - I see a similar but different crash in v4.4.y but have not been able to track it down. Actually, I found the problem fixed here while trying to reproduce that crash with the latest kernel.
Guenter
On Mon, Mar 25, 2019 at 07:21:00AM -0700, Guenter Roeck wrote:
It is actually a bit more complicated than that. The stored pointer (drv->soc_card) isn't released. The problem is that dev_get_drvdata(drv->soc_card->dev) is NULL, which causes the crash. I don't think there is a UAF involved - I built the test image with KASAN enabled and it did not barf at me.
What is a "UAF"?
Overall the implementation does seem a bit suspicious to me. I don't really understand why the platform driver handles suspend/resume for the cards. But that may just be my lack of understanding. However, either case, I think the Haswell driver (sst-haswell-pcm.c) has a similar problem. I am also not sure if
It's certainly a bit unusual, usually the platform driver would just deal with suspending itself and the card driver would handle overall card suspension together with the core.
On Mon, Mar 25, 2019 at 03:05:33PM +0000, Mark Brown wrote:
On Mon, Mar 25, 2019 at 07:21:00AM -0700, Guenter Roeck wrote:
It is actually a bit more complicated than that. The stored pointer (drv->soc_card) isn't released. The problem is that dev_get_drvdata(drv->soc_card->dev) is NULL, which causes the crash. I don't think there is a UAF involved - I built the test image with KASAN enabled and it did not barf at me.
What is a "UAF"?
use-after-free. Sorry, I saw that term used so often recently that I somehow thought it was common and started using it myself.
Guenter
Overall the implementation does seem a bit suspicious to me. I don't really understand why the platform driver handles suspend/resume for the cards. But that may just be my lack of understanding. However, either case, I think the Haswell driver (sst-haswell-pcm.c) has a similar problem. I am also not sure if
It's certainly a bit unusual, usually the platform driver would just deal with suspending itself and the card driver would handle overall card suspension together with the core.
On Fri, Mar 22, 2019 at 03:39:48PM -0700, Guenter Roeck wrote:
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b
Please think hard before including complete backtraces in upstream reports, they are very large and contain almost no useful information relative to their size so often obscure the relevant content in your message. If part of the backtrace is usefully illustrative then it's usually better to pull out the relevant sections.
The patch
ASoC: intel: Fix crash at suspend/resume after failed codec registration
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 8f71370f4b02730e8c27faf460af7a3586e24e1f Mon Sep 17 00:00:00 2001
From: Guenter Roeck linux@roeck-us.net Date: Fri, 22 Mar 2019 15:39:48 -0700 Subject: [PATCH] ASoC: intel: Fix crash at suspend/resume after failed codec registration
If codec registration fails after the ASoC Intel SST driver has been probed, the kernel will Oops and crash at suspend/resume.
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15 Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014 RIP: 0010:snd_soc_suspend+0x5a/0xd21 Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89 fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03 <8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b RSP: 0018:ffff888035407750 EFLAGS: 00010202 RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098 RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718 R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746 R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000 FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0 Call Trace: ? dpm_complete+0x67b/0x67b ? i915_gem_suspend+0x14d/0x1ad sst_soc_prepare+0x91/0x1dd ? sst_be_hw_params+0x7e/0x7e dpm_prepare+0x39a/0x88b dpm_suspend_start+0x13/0x9d suspend_devices_and_enter+0x18f/0xbd7 ? arch_suspend_enable_irqs+0x11/0x11 ? printk+0xd9/0x12d ? lock_release+0x95f/0x95f ? log_buf_vmcoreinfo_setup+0x131/0x131 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? __pm_pr_dbg+0x186/0x190 ? pm_notifier_call_chain+0x39/0x39 ? suspend_test+0x9d/0x9d pm_suspend+0x2f4/0x728 ? trace_suspend_resume+0x3da/0x3da ? lock_release+0x95f/0x95f ? kernfs_fop_write+0x19f/0x32d state_store+0xd8/0x147 ? sysfs_kf_read+0x155/0x155 kernfs_fop_write+0x23e/0x32d __vfs_write+0x108/0x608 ? vfs_read+0x2e9/0x2e9 ? rcu_read_lock_sched_held+0x140/0x22a ? __bpf_trace_rcu_utilization+0xa/0xa ? debug_smp_processor_id+0x10/0x10 ? selinux_file_permission+0x1c5/0x3c8 ? rcu_sync_lockdep_assert+0x6a/0xad ? __sb_start_write+0x129/0x2ac vfs_write+0x1aa/0x434 ksys_write+0xfe/0x1be ? __ia32_sys_read+0x82/0x82 do_syscall_64+0xcd/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xbe
In the observed situation, the problem is seen because the codec driver failed to probe due to a hardware problem.
max98090 i2c-193C9890:00: Failed to read device revision: -1 max98090 i2c-193C9890:00: ASoC: failed to probe component -1 cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1 cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1 cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1
The problem is similar to the problem solved with commit 2fc995a87f2e ("ASoC: intel: Fix crash at suspend/resume without card registration"), but codec registration fails at a later point. At that time, the pointer checked with the above mentioned commit is already set, but it is not cleared if the device is subsequently removed. Adding a remove function to clear the pointer fixes the problem.
Cc: stable@vger.kernel.org Cc: Jarkko Nikula jarkko.nikula@linux.intel.com Cc: Curtis Malainey cujomalainey@chromium.org Signed-off-by: Guenter Roeck linux@roeck-us.net Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c index 08cea5b5cda9..0e8b1c5eec88 100644 --- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c +++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c @@ -706,9 +706,17 @@ static int sst_soc_probe(struct snd_soc_component *component) return sst_dsp_init_v2_dpcm(component); }
+static void sst_soc_remove(struct snd_soc_component *component) +{ + struct sst_data *drv = dev_get_drvdata(component->dev); + + drv->soc_card = NULL; +} + static const struct snd_soc_component_driver sst_soc_platform_drv = { .name = DRV_NAME, .probe = sst_soc_probe, + .remove = sst_soc_remove, .ops = &sst_platform_ops, .compr_ops = &sst_platform_compr_ops, .pcm_new = sst_pcm_new,
participants (3)
-
Guenter Roeck -
Mark Brown -
Pierre-Louis Bossart