Signed-off-by: Dong Aisheng b29396@freescale.com Cc: Mark Brown broonie@opensource.wolfsonmicro.com Cc: Liam Girdwood lrg@ti.com Cc: Sascha Hauer s.hauer@pengutronix.de --- sound/soc/mxs/mxs-saif.c | 677 ++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/mxs/mxs-saif.h | 130 +++++++++ 2 files changed, 807 insertions(+), 0 deletions(-)

diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c new file mode 100644 index 0000000..0b3adae --- /dev/null +++ b/sound/soc/mxs/mxs-saif.c @@ -0,0 +1,677 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <mach/dma.h> +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <mach/mxs.h> + +#include "mxs-saif.h" + +static struct mxs_saif *mxs_saif[2]; + +static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + switch (clk_id) { + case MXS_SAIF_MCLK: + saif->mclk = freq; + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * Set SAIF clock and MCLK + */ +static int mxs_saif_set_clk(struct mxs_saif *saif, + unsigned int mclk, + unsigned int rate) +{ + u32 scr; + int ret; + + scr = __raw_readl(saif->base + SAIF_CTRL); + scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE; + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + + /* + * Set SAIF clock + * + * The SAIF clock should be either 384*fs or 512*fs. + * If MCLK is used, the SAIF clk ratio need to match mclk ratio. + * For 32x mclk, set saif clk as 512*fs. + * For 48x mclk, set saif clk as 384*fs. + * + * If MCLK is not used, we just set saif clk to 512*fs. + */ + if (saif->mclk_in_use) { + if (mclk % 32 == 0) { + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + ret = clk_set_rate(saif->clk, 512 * rate); + } else if (mclk % 48 == 0) { + scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE; + ret = clk_set_rate(saif->clk, 384 * rate); + } else { + /* SAIF MCLK should be either 32x or 48x */ + return -EINVAL; + } + } else { + ret = clk_set_rate(saif->clk, 512 * rate); + scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; + } + + if (ret) + return ret; + + if (!saif->mclk_in_use) { + __raw_writel(scr, saif->base + SAIF_CTRL); + return 0; + } + + /* + * Program the over-sample rate for MCLK output + * + * The available MCLK range is 32x, 48x... 512x. The rate + * could be from 8kHz to 192kH. + */ + switch (mclk / rate) { + case 32: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4); + break; + case 64: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3); + break; + case 128: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2); + break; + case 256: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1); + break; + case 512: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0); + break; + case 48: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3); + break; + case 96: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2); + break; + case 192: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1); + break; + case 384: + scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0); + break; + default: + return -EINVAL; + } + + __raw_writel(scr, saif->base + SAIF_CTRL); + + return 0; +} + +/* + * Put and disable MCLK. + */ +int mxs_saif_put_mclk(unsigned int saif_id) +{ + struct mxs_saif *saif = mxs_saif[saif_id]; + u32 stat; + + if (!saif) + return -EINVAL; + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(saif->dev, "error: busy\n"); + return -EBUSY; + } + + clk_disable(saif->clk); + + /* disable MCLK output */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + saif->mclk_in_use = 0; + return 0; +} + +/* + * Get MCLK and set clock rate, then enable it + * + * This interface is used for codecs who are using MCLK provided + * by saif. + */ +int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, + unsigned int rate) +{ + struct mxs_saif *saif = mxs_saif[saif_id]; + u32 stat; + int ret; + + if (!saif) + return -EINVAL; + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(saif->dev, "error: busy\n"); + return -EBUSY; + } + + /* Clear Reset */ + __raw_writel(BM_SAIF_CTRL_SFTRST, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + saif->mclk_in_use = 1; + ret = mxs_saif_set_clk(saif, mclk, rate); + if (ret) + return ret; + + ret = clk_enable(saif->clk); + if (ret) + return ret; + + /* enable MCLK output */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + + return 0; +} + +/* + * SAIF DAI format configuration. + * Should only be called when port is inactive. + */ +static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) +{ + u32 scr, stat; + u32 scr0; + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(cpu_dai->dev, "error: busy\n"); + return -EBUSY; + } + + scr0 = __raw_readl(saif->base + SAIF_CTRL); + scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \ + & ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY; + scr = 0; + + /* DAI mode */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + /* data frame low 1clk before data */ + scr |= BM_SAIF_CTRL_DELAY; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_LEFT_J: + /* data frame high with data */ + scr &= ~BM_SAIF_CTRL_DELAY; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + scr &= ~BM_SAIF_CTRL_JUSTIFY; + break; + default: + return -EINVAL; + } + + /* DAI clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_IF: + scr |= BM_SAIF_CTRL_BITCLK_EDGE; + scr |= BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_IB_NF: + scr |= BM_SAIF_CTRL_BITCLK_EDGE; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_NB_IF: + scr &= ~BM_SAIF_CTRL_BITCLK_EDGE; + scr |= BM_SAIF_CTRL_LRCLK_POLARITY; + break; + case SND_SOC_DAIFMT_NB_NF: + scr &= ~BM_SAIF_CTRL_BITCLK_EDGE; + scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; + break; + } + + /* + * Note: We simply just support master mode since SAIF TX can only + * work as master. + */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + scr &= ~BM_SAIF_CTRL_SLAVE_MODE; + __raw_writel(scr | scr0, saif->base + SAIF_CTRL); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int mxs_saif_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + snd_soc_dai_set_dma_data(cpu_dai, substream, &saif->dma_param); + + /* clear error status to 0 for each re-open */ + saif->fifo_underrun = 0; + saif->fifo_overrun = 0; + + /* Clear Reset for normal operations */ + __raw_writel(BM_SAIF_CTRL_SFTRST, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + return 0; +} + +/* + * Should only be called when port is inactive. + * although can be called multiple times by upper layers. + */ +static int mxs_saif_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + u32 scr, stat; + int ret; + + /* mclk should already be set */ + if (!saif->mclk && saif->mclk_in_use) { + dev_err(cpu_dai->dev, "set mclk first\n"); + return -EINVAL; + } + + stat = __raw_readl(saif->base + SAIF_STAT); + if (stat & BM_SAIF_STAT_BUSY) { + dev_err(cpu_dai->dev, "error: busy\n"); + return -EBUSY; + } + + /* + * Set saif clk based on sample rate. + * If mclk is used, we also set mclk, if not, saif->mclk is + * default 0, means not used. + */ + ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params)); + if (ret) { + dev_err(cpu_dai->dev, "unable to get proper clk\n"); + return ret; + } + + scr = __raw_readl(saif->base + SAIF_CTRL); + + scr &= ~BM_SAIF_CTRL_WORD_LENGTH; + scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(0); + break; + case SNDRV_PCM_FORMAT_S20_3LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(4); + scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + break; + case SNDRV_PCM_FORMAT_S24_LE: + scr |= BF_SAIF_CTRL_WORD_LENGTH(8); + scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; + break; + default: + return -EINVAL; + } + + /* Tx/Rx config */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* enable TX mode */ + scr &= ~BM_SAIF_CTRL_READ_MODE; + } else { + /* enable RX mode */ + scr |= BM_SAIF_CTRL_READ_MODE; + } + + __raw_writel(scr, saif->base + SAIF_CTRL); + return 0; +} + +static int mxs_saif_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + /* clear clock gate */ + __raw_writel(BM_SAIF_CTRL_CLKGATE, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + /* enable FIFO error irqs */ + __raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + + return 0; +} + +static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *cpu_dai) +{ + struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + dev_dbg(cpu_dai->dev, "start\n"); + + clk_enable(saif->clk); + if (!saif->mclk_in_use) + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_SET_ADDR); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* + * write a data to saif data register to trigger + * the transfer + */ + __raw_writel(0, saif->base + SAIF_DATA); + } else { + /* + * read a data from saif data register to trigger + * the receive + */ + __raw_readl(saif->base + SAIF_DATA); + } + + dev_dbg(cpu_dai->dev, "CTRL 0x%x STAT 0x%x\n", + __raw_readl(saif->base + SAIF_CTRL), + __raw_readl(saif->base + SAIF_STAT)); + + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + dev_dbg(cpu_dai->dev, "stop\n"); + + clk_disable(saif->clk); + if (!saif->mclk_in_use) + __raw_writel(BM_SAIF_CTRL_RUN, + saif->base + SAIF_CTRL + MXS_CLR_ADDR); + + break; + default: + return -EINVAL; + } + + return 0; +} + +#define MXS_SAIF_RATES SNDRV_PCM_RATE_8000_192000 +#define MXS_SAIF_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_ops mxs_saif_dai_ops = { + .startup = mxs_saif_startup, + .trigger = mxs_saif_trigger, + .prepare = mxs_saif_prepare, + .hw_params = mxs_saif_hw_params, + .set_sysclk = mxs_saif_set_dai_sysclk, + .set_fmt = mxs_saif_set_dai_fmt, +}; + +static int mxs_saif_dai_probe(struct snd_soc_dai *dai) +{ + struct mxs_saif *saif = dev_get_drvdata(dai->dev); + + snd_soc_dai_set_drvdata(dai, saif); + + return 0; +} + +static struct snd_soc_dai_driver mxs_saif_dai = { + .name = "mxs-saif", + .probe = mxs_saif_dai_probe, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = MXS_SAIF_RATES, + .formats = MXS_SAIF_FORMATS, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = MXS_SAIF_RATES, + .formats = MXS_SAIF_FORMATS, + }, + .ops = &mxs_saif_dai_ops, +}; + +static irqreturn_t mxs_saif_irq(int irq, void *dev_id) +{ + struct mxs_saif *saif = dev_id; + unsigned int stat; + + stat = __raw_readl(saif->base + SAIF_STAT); + if (!(stat & (BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ | + BM_SAIF_STAT_FIFO_OVERFLOW_IRQ))) + return IRQ_NONE; + + if (stat & BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ) { + dev_dbg(saif->dev, "underrun!!! %d\n", ++saif->fifo_underrun); + __raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ, + saif->base + SAIF_STAT + MXS_CLR_ADDR); + } + + if (stat & BM_SAIF_STAT_FIFO_OVERFLOW_IRQ) { + dev_dbg(saif->dev, "overrun!!! %d\n", ++saif->fifo_overrun); + __raw_writel(BM_SAIF_STAT_FIFO_OVERFLOW_IRQ, + saif->base + SAIF_STAT + MXS_CLR_ADDR); + } + + dev_dbg(saif->dev, "SAIF_CTRL %x SAIF_STAT %x\n", + __raw_readl(saif->base + SAIF_CTRL), + __raw_readl(saif->base + SAIF_STAT)); + + return IRQ_HANDLED; +} + +static int mxs_saif_probe(struct platform_device *pdev) +{ + struct resource *res; + struct mxs_saif *saif; + int ret = 0; + + saif = kzalloc(sizeof(*saif), GFP_KERNEL); + if (!saif) + return -ENOMEM; + + if (pdev->id >= ARRAY_SIZE(mxs_saif)) + return -EINVAL; + mxs_saif[pdev->id] = saif; + + saif->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(saif->clk)) { + ret = PTR_ERR(saif->clk); + dev_err(&pdev->dev, "Cannot get the clock: %d\n", + ret); + goto failed_clk; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + dev_err(&pdev->dev, "failed to get io resource: %d\n", + ret); + goto failed_get_resource; + } + + if (!request_mem_region(res->start, resource_size(res), "mxs-saif")) { + dev_err(&pdev->dev, "request_mem_region failed\n"); + ret = -EBUSY; + goto failed_get_resource; + } + + saif->base = ioremap(res->start, resource_size(res)); + if (!saif->base) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENODEV; + goto failed_ioremap; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!res) { + ret = -ENODEV; + dev_err(&pdev->dev, "failed to get dma resource: %d\n", + ret); + goto failed_ioremap; + } + saif->dma_param.chan_num = res->start; + + saif->irq = platform_get_irq(pdev, 0); + if (saif->irq < 0) { + ret = saif->irq; + dev_err(&pdev->dev, "failed to get irq resource: %d\n", + ret); + goto failed_get_irq1; + } + + saif->dev = &pdev->dev; + ret = request_irq(saif->irq, mxs_saif_irq, 0, "mxs-saif", saif); + if (ret) { + dev_err(&pdev->dev, "failed to request irq\n"); + goto failed_get_irq1; + } + + saif->dma_param.chan_irq = platform_get_irq(pdev, 1); + if (saif->dma_param.chan_irq < 0) { + ret = saif->dma_param.chan_irq; + dev_err(&pdev->dev, "failed to get dma irq resource: %d\n", + ret); + goto failed_get_irq2; + } + + platform_set_drvdata(pdev, saif); + + ret = snd_soc_register_dai(&pdev->dev, &mxs_saif_dai); + if (ret) { + dev_err(&pdev->dev, "register DAI failed\n"); + goto failed_register; + } + + saif->soc_platform_pdev = platform_device_alloc( + "mxs-pcm-audio", pdev->id); + if (!saif->soc_platform_pdev) { + ret = -ENOMEM; + goto failed_pdev_alloc; + } + + platform_set_drvdata(saif->soc_platform_pdev, saif); + ret = platform_device_add(saif->soc_platform_pdev); + if (ret) { + dev_err(&pdev->dev, "failed to add soc platform device\n"); + goto failed_pdev_add; + } + + return 0; + +failed_pdev_add: + platform_device_put(saif->soc_platform_pdev); +failed_pdev_alloc: + snd_soc_unregister_dai(&pdev->dev); +failed_register: +failed_get_irq2: + free_irq(saif->irq, saif); +failed_get_irq1: + iounmap(saif->base); +failed_ioremap: + release_mem_region(res->start, resource_size(res)); +failed_get_resource: + clk_put(saif->clk); +failed_clk: + kfree(saif); + + return ret; +} + +static int __devexit mxs_saif_remove(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct mxs_saif *saif = platform_get_drvdata(pdev); + + platform_device_unregister(saif->soc_platform_pdev); + + snd_soc_unregister_dai(&pdev->dev); + + iounmap(saif->base); + release_mem_region(res->start, resource_size(res)); + free_irq(saif->irq, saif); + + clk_put(saif->clk); + kfree(saif); + + return 0; +} + +static struct platform_driver mxs_saif_driver = { + .probe = mxs_saif_probe, + .remove = __devexit_p(mxs_saif_remove), + + .driver = { + .name = "mxs-saif", + .owner = THIS_MODULE, + }, +}; + +static int __init mxs_saif_init(void) +{ + return platform_driver_register(&mxs_saif_driver); +} + +static void __exit mxs_saif_exit(void) +{ + platform_driver_unregister(&mxs_saif_driver); +} + +module_init(mxs_saif_init); +module_exit(mxs_saif_exit); +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("MXS ASoC SAIF driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/mxs/mxs-saif.h b/sound/soc/mxs/mxs-saif.h new file mode 100644 index 0000000..0e2ff8c --- /dev/null +++ b/sound/soc/mxs/mxs-saif.h @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + + +#ifndef _MXS_SAIF_H +#define _MXS_SAIF_H + +#define SAIF_CTRL 0x0 +#define SAIF_STAT 0x10 +#define SAIF_DATA 0x20 +#define SAIF_VERSION 0X30 + +/* SAIF_CTRL */ +#define BM_SAIF_CTRL_SFTRST 0x80000000 +#define BM_SAIF_CTRL_CLKGATE 0x40000000 +#define BP_SAIF_CTRL_BITCLK_MULT_RATE 27 +#define BM_SAIF_CTRL_BITCLK_MULT_RATE 0x38000000 +#define BF_SAIF_CTRL_BITCLK_MULT_RATE(v) \ + (((v) << 27) & BM_SAIF_CTRL_BITCLK_MULT_RATE) +#define BM_SAIF_CTRL_BITCLK_BASE_RATE 0x04000000 +#define BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN 0x02000000 +#define BM_SAIF_CTRL_FIFO_SERVICE_IRQ_EN 0x01000000 +#define BP_SAIF_CTRL_RSRVD2 21 +#define BM_SAIF_CTRL_RSRVD2 0x00E00000 + +#define BP_SAIF_CTRL_DMAWAIT_COUNT 16 +#define BM_SAIF_CTRL_DMAWAIT_COUNT 0x001F0000 +#define BF_SAIF_CTRL_DMAWAIT_COUNT(v) \ + (((v) << 16) & BM_SAIF_CTRL_DMAWAIT_COUNT) +#define BP_SAIF_CTRL_CHANNEL_NUM_SELECT 14 +#define BM_SAIF_CTRL_CHANNEL_NUM_SELECT 0x0000C000 +#define BF_SAIF_CTRL_CHANNEL_NUM_SELECT(v) \ + (((v) << 14) & BM_SAIF_CTRL_CHANNEL_NUM_SELECT) +#define BM_SAIF_CTRL_LRCLK_PULSE 0x00002000 +#define BM_SAIF_CTRL_BIT_ORDER 0x00001000 +#define BM_SAIF_CTRL_DELAY 0x00000800 +#define BM_SAIF_CTRL_JUSTIFY 0x00000400 +#define BM_SAIF_CTRL_LRCLK_POLARITY 0x00000200 +#define BM_SAIF_CTRL_BITCLK_EDGE 0x00000100 +#define BP_SAIF_CTRL_WORD_LENGTH 4 +#define BM_SAIF_CTRL_WORD_LENGTH 0x000000F0 +#define BF_SAIF_CTRL_WORD_LENGTH(v) \ + (((v) << 4) & BM_SAIF_CTRL_WORD_LENGTH) +#define BM_SAIF_CTRL_BITCLK_48XFS_ENABLE 0x00000008 +#define BM_SAIF_CTRL_SLAVE_MODE 0x00000004 +#define BM_SAIF_CTRL_READ_MODE 0x00000002 +#define BM_SAIF_CTRL_RUN 0x00000001 + +/* SAIF_STAT */ +#define BM_SAIF_STAT_PRESENT 0x80000000 +#define BP_SAIF_STAT_RSRVD2 17 +#define BM_SAIF_STAT_RSRVD2 0x7FFE0000 +#define BF_SAIF_STAT_RSRVD2(v) \ + (((v) << 17) & BM_SAIF_STAT_RSRVD2) +#define BM_SAIF_STAT_DMA_PREQ 0x00010000 +#define BP_SAIF_STAT_RSRVD1 7 +#define BM_SAIF_STAT_RSRVD1 0x0000FF80 +#define BF_SAIF_STAT_RSRVD1(v) \ + (((v) << 7) & BM_SAIF_STAT_RSRVD1) + +#define BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ 0x00000040 +#define BM_SAIF_STAT_FIFO_OVERFLOW_IRQ 0x00000020 +#define BM_SAIF_STAT_FIFO_SERVICE_IRQ 0x00000010 +#define BP_SAIF_STAT_RSRVD0 1 +#define BM_SAIF_STAT_RSRVD0 0x0000000E +#define BF_SAIF_STAT_RSRVD0(v) \ + (((v) << 1) & BM_SAIF_STAT_RSRVD0) +#define BM_SAIF_STAT_BUSY 0x00000001 + +/* SAFI_DATA */ +#define BP_SAIF_DATA_PCM_RIGHT 16 +#define BM_SAIF_DATA_PCM_RIGHT 0xFFFF0000 +#define BF_SAIF_DATA_PCM_RIGHT(v) \ + (((v) << 16) & BM_SAIF_DATA_PCM_RIGHT) +#define BP_SAIF_DATA_PCM_LEFT 0 +#define BM_SAIF_DATA_PCM_LEFT 0x0000FFFF +#define BF_SAIF_DATA_PCM_LEFT(v) \ + (((v) << 0) & BM_SAIF_DATA_PCM_LEFT) + +/* SAIF_VERSION */ +#define BP_SAIF_VERSION_MAJOR 24 +#define BM_SAIF_VERSION_MAJOR 0xFF000000 +#define BF_SAIF_VERSION_MAJOR(v) \ + (((v) << 24) & BM_SAIF_VERSION_MAJOR) +#define BP_SAIF_VERSION_MINOR 16 +#define BM_SAIF_VERSION_MINOR 0x00FF0000 +#define BF_SAIF_VERSION_MINOR(v) \ + (((v) << 16) & BM_SAIF_VERSION_MINOR) +#define BP_SAIF_VERSION_STEP 0 +#define BM_SAIF_VERSION_STEP 0x0000FFFF +#define BF_SAIF_VERSION_STEP(v) \ + (((v) << 0) & BM_SAIF_VERSION_STEP) + +#define MXS_SAIF_MCLK 0 + +#include "mxs-pcm.h" + +struct mxs_saif { + struct device *dev; + struct clk *clk; + unsigned int mclk; + unsigned int mclk_in_use; + void __iomem *base; + int irq; + struct mxs_pcm_dma_params dma_param; + + struct platform_device *soc_platform_pdev; + u32 fifo_underrun; + u32 fifo_overrun; +}; + +extern int mxs_saif_put_mclk(unsigned int saif_id); +extern int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, + unsigned int rate); +#endif

Signed-off-by: Dong Aisheng b29396@freescale.com Cc: Mark Brown broonie@opensource.wolfsonmicro.com Cc: Liam Girdwood lrg@ti.com Cc: Sascha Hauer s.hauer@pengutronix.de --- sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/mxs/Kconfig | 20 ++++++++++++++++++++ sound/soc/mxs/Makefile | 10 ++++++++++ 4 files changed, 32 insertions(+), 0 deletions(-)

diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 8224db5..47d07ce 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -51,6 +51,7 @@ source "sound/soc/nuc900/Kconfig" source "sound/soc/omap/Kconfig" source "sound/soc/kirkwood/Kconfig" source "sound/soc/mid-x86/Kconfig" +source "sound/soc/mxs/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/samsung/Kconfig" source "sound/soc/s6000/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 1ed61c5..fc4136e 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SND_SOC) += fsl/ obj-$(CONFIG_SND_SOC) += imx/ obj-$(CONFIG_SND_SOC) += jz4740/ obj-$(CONFIG_SND_SOC) += mid-x86/ +obj-$(CONFIG_SND_SOC) += mxs/ obj-$(CONFIG_SND_SOC) += nuc900/ obj-$(CONFIG_SND_SOC) += omap/ obj-$(CONFIG_SND_SOC) += kirkwood/ diff --git a/sound/soc/mxs/Kconfig b/sound/soc/mxs/Kconfig new file mode 100644 index 0000000..e4ba8d5 --- /dev/null +++ b/sound/soc/mxs/Kconfig @@ -0,0 +1,20 @@ +menuconfig SND_MXS_SOC + tristate "SoC Audio for Freescale MXS CPUs" + depends on ARCH_MXS + select SND_PCM + help + Say Y or M if you want to add support for codecs attached to + the MXS SAIF interface. + + +if SND_MXS_SOC + +config SND_SOC_MXS_SGTL5000 + tristate "SoC Audio support for i.MX boards with sgtl5000" + depends on I2C + select SND_SOC_SGTL5000 + help + Say Y if you want to add support for SoC audio on an MXS board with + a sgtl5000 codec. + +endif # SND_MXS_SOC diff --git a/sound/soc/mxs/Makefile b/sound/soc/mxs/Makefile new file mode 100644 index 0000000..565b5b5 --- /dev/null +++ b/sound/soc/mxs/Makefile @@ -0,0 +1,10 @@ +# MXS Platform Support +snd-soc-mxs-objs := mxs-saif.o +snd-soc-mxs-pcm-objs := mxs-pcm.o + +obj-$(CONFIG_SND_MXS_SOC) += snd-soc-mxs.o snd-soc-mxs-pcm.o + +# i.MX Machine Support +snd-soc-mxs-sgtl5000-objs := mxs-sgtl5000.o + +obj-$(CONFIG_SND_SOC_MXS_SGTL5000) += snd-soc-mxs-sgtl5000.o

Signed-off-by: Dong Aisheng b29396@freescale.com Cc: Sascha Hauer s.hauer@pengutronix.de --- arch/arm/mach-mxs/Kconfig | 1 + arch/arm/mach-mxs/devices-mx28.h | 3 + arch/arm/mach-mxs/devices/Kconfig | 3 + arch/arm/mach-mxs/devices/Makefile | 1 + arch/arm/mach-mxs/devices/platform-mxs-saif.c | 60 +++++++++++++++++++++++ arch/arm/mach-mxs/include/mach/devices-common.h | 12 +++++ arch/arm/mach-mxs/mach-mx28evk.c | 20 ++++++++ 7 files changed, 100 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4cd0231..405c28d 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -48,6 +48,7 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_FLEXCAN select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB + select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_OCOTP help Include support for MX28EVK platform. This includes specific diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 79b9452..c0f21ce 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -45,3 +45,6 @@ extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;

struct platform_device *__init mx28_add_mxsfb( const struct mxsfb_platform_data *pdata); + +extern const struct mxs_saif_data mx28_saif_data[] __initconst; +#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id]) diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index acf9eea..b554371 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -23,3 +23,6 @@ config MXS_HAVE_PLATFORM_MXS_PWM

config MXS_HAVE_PLATFORM_MXSFB bool + +config MXS_HAVE_PLATFORM_MXS_SAIF + bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 351915c..d3e8cc3 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o obj-y += platform-gpio-mxs.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c new file mode 100644 index 0000000..1ec965e --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c @@ -0,0 +1,60 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define mxs_saif_data_entry_single(soc, _id) \ + { \ + .id = _id, \ + .iobase = soc ## _SAIF ## _id ## _BASE_ADDR, \ + .irq = soc ## _INT_SAIF ## _id, \ + .dma = soc ## _DMA_SAIF ## _id, \ + .dmairq = soc ## _INT_SAIF ## _id ##_DMA, \ + } + +#define mxs_saif_data_entry(soc, _id) \ + [_id] = mxs_saif_data_entry_single(soc, _id) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_saif_data mx28_saif_data[] __initconst = { + mxs_saif_data_entry(MX28, 0), + mxs_saif_data_entry(MX28, 1), +}; +#endif + +struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, { + .start = data->dma, + .end = data->dma, + .flags = IORESOURCE_DMA, + }, { + .start = data->dmairq, + .end = data->dmairq, + .flags = IORESOURCE_IRQ, + }, + + }; + + return mxs_add_platform_device("mxs-saif", data->id, res, + ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 812d7a8..a8080f4 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -92,3 +92,15 @@ struct platform_device *__init mxs_add_mxs_mmc( /* pwm */ struct platform_device *__init mxs_add_mxs_pwm( resource_size_t iobase, int id); + +/* saif */ +struct mxs_saif_data { + int id; + resource_size_t iobase; + resource_size_t irq; + resource_size_t dma; + resource_size_t dmairq; +}; + +struct platform_device *__init mxs_add_saif( + const struct mxs_saif_data *data); diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index eaaf6ff..7837a87 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -40,6 +40,8 @@ #define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28) #define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29)

+#define DIGCTRL_BASE_ADDR MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR) + static const iomux_cfg_t mx28evk_pads[] __initconst = { /* duart */ MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, @@ -183,6 +185,18 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {

/* led */ MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL, + + /* saif0 & saif1 */ + MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), };

/* led */ @@ -392,6 +406,12 @@ static void __init mx28evk_init(void)

mx28_add_mxsfb(&mx28evk_mxsfb_pdata);

+ mx28_add_saif(0); + mx28_add_saif(1); + + /*set the saif clk mux, both saif0/saif1 use saif0 clk*/ + __raw_writel(0x2 << 10, DIGCTRL_BASE_ADDR); + /* power on mmc slot by writing 0 to the gpio */ ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power");

Signed-off-by: Dong Aisheng b29396@freescale.com Cc: Sascha Hauer s.hauer@pengutronix.de --- arch/arm/mach-mxs/Kconfig | 1 + arch/arm/mach-mxs/mach-mx28evk.c | 17 +++++++++++++++++ 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 405c28d..2de2ea1 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -49,6 +49,7 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB select MXS_HAVE_PLATFORM_MXS_SAIF + select MXS_HAVE_PLATFORM_MXS_I2C select MXS_OCOTP help Include support for MX28EVK platform. This includes specific diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 7837a87..491cf0d 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -18,6 +18,7 @@ #include <linux/leds.h> #include <linux/irq.h> #include <linux/clk.h> +#include <linux/i2c.h>

#include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -186,6 +187,12 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { /* led */ MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,

+ /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_I2C0_SDA__I2C0_SDA | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + /* saif0 & saif1 */ MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), @@ -366,6 +373,12 @@ static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = { }, };

+static struct i2c_board_info mxs_i2c0_board_info[] __initdata = { + { + I2C_BOARD_INFO("sgtl5000", 0x0a), + }, +}; + static void __init mx28evk_init(void) { int ret; @@ -409,6 +422,10 @@ static void __init mx28evk_init(void) mx28_add_saif(0); mx28_add_saif(1);

+ mx28_add_mxs_i2c(0); + i2c_register_board_info(0, mxs_i2c0_board_info, + ARRAY_SIZE(mxs_i2c0_board_info)); + /*set the saif clk mux, both saif0/saif1 use saif0 clk*/ __raw_writel(0x2 << 10, DIGCTRL_BASE_ADDR);

Signed-off-by: Dong Aisheng b29396@freescale.com Cc: Sascha Hauer s.hauer@pengutronix.de --- arch/arm/mach-mxs/mach-mx28evk.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 491cf0d..f99fc6b 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -426,6 +426,9 @@ static void __init mx28evk_init(void) i2c_register_board_info(0, mxs_i2c0_board_info, ARRAY_SIZE(mxs_i2c0_board_info));

+ mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, + NULL, 0); + /*set the saif clk mux, both saif0/saif1 use saif0 clk*/ __raw_writel(0x2 << 10, DIGCTRL_BASE_ADDR);

According to spec, set to 1 is the enable of fractional devide or the clock can not be generated properly.

Signed-off-by: Dong Aisheng b29396@freescale.com Cc: Sascha Hauer s.hauer@pengutronix.de --- arch/arm/mach-mxs/clock-mx28.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 7b3657b..7954013 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -710,11 +710,11 @@ static int clk_misc_init(void)

/* SAIF has to use frac div for functional operation */ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0); - reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN; + reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);

reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1); - reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN; + reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN; __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);

/*

Add fixed regulator to enable basic audio-support until full regulator support is done.

Signed-off-by: Wolfram Sang w.sang@pengutronix.de Cc: Dong Aisheng b29396@freescale.com ---

Aisheng: This is the other patch (together with [1]) making the sgtl-hack obsolete. Needs fixed regulators, of course.

[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2011-July/041974.html

arch/arm/mach-mxs/mach-mx28evk.c | 42 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index f99fc6b..edab588 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -19,6 +19,8 @@ #include <linux/irq.h> #include <linux/clk.h> #include <linux/i2c.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h>

#include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -379,6 +381,44 @@ static struct i2c_board_info mxs_i2c0_board_info[] __initdata = { }, };

+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("VDDA", "0-000a"), + REGULATOR_SUPPLY("VDDIO", "0-000a"), +}; + +static struct regulator_init_data mx28evk_vdd_reg_init_data = { + .constraints = { + .name = "3V3", + .always_on = 1, + }, + .consumer_supplies = mx28evk_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies), +}; + +static struct fixed_voltage_config mx28evk_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 1, + .init_data = &mx28evk_vdd_reg_init_data, +}; +static struct platform_device mx28evk_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &mx28evk_vdd_pdata, + }, +}; +static void __init mx28evk_add_regulators(void) +{ + platform_device_register(&mx28evk_voltage_regulator); +} +#else +static void __init mx28evk_add_regulators(void) {} +#endif + static void __init mx28evk_init(void) { int ret; @@ -426,6 +466,8 @@ static void __init mx28evk_init(void) i2c_register_board_info(0, mxs_i2c0_board_info, ARRAY_SIZE(mxs_i2c0_board_info));

+ mx28evk_add_regulators(); + mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);