Convert Dialog DA7219 bindings to DT schema format.

Signed-off-by: David Rau David.Rau.opensource@dm.renesas.com --- .../devicetree/bindings/sound/da7219.txt | 112 --------- .../bindings/sound/dialog,da7219.yaml | 232 ++++++++++++++++++ 2 files changed, 232 insertions(+), 112 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/da7219.txt create mode 100644 Documentation/devicetree/bindings/sound/dialog,da7219.yaml

diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt deleted file mode 100644 index add1caf26ac2..000000000000 --- a/Documentation/devicetree/bindings/sound/da7219.txt +++ /dev/null @@ -1,112 +0,0 @@ -Dialog Semiconductor DA7219 Audio Codec bindings - -DA7219 is an audio codec with advanced accessory detect features. - -====== - -Required properties: -- compatible : Should be "dlg,da7219" -- reg: Specifies the I2C slave address - -- interrupts : IRQ line info for DA7219. - (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for - further information relating to interrupt properties) - -- VDD-supply: VDD power supply for the device -- VDDMIC-supply: VDDMIC power supply for the device -- VDDIO-supply: VDDIO power supply for the device - (See Documentation/devicetree/bindings/regulator/regulator.txt for further - information relating to regulators) - -Optional properties: -- interrupt-names : Name associated with interrupt line. Should be "wakeup" if - interrupt is to be used to wake system, otherwise "irq" should be used. -- wakeup-source: Flag to indicate this device can wake system (suspend/resume). - -- #clock-cells : Should be set to '<1>', two clock sources provided; -- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK); - -- clocks : phandle and clock specifier for codec MCLK. -- clock-names : Clock name string for 'clocks' attribute, should be "mclk". - -- dlg,micbias-lvl : Voltage (mV) for Mic Bias - [<1600>, <1800>, <2000>, <2200>, <2400>, <2600>] -- dlg,mic-amp-in-sel : Mic input source type - ["diff", "se_p", "se_n"] - -Deprecated properties: -- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine - (LDO unavailable in production HW so property no longer required). - -====== - -Child node - 'da7219_aad': - -Optional properties: -- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). - [<2800>, <2900>] -- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) -- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms) - [<2>, <5>, <10>, <50>, <100>, <200>, <500>] -- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms) - [<200>, <500>, <750>, <1000>] -- dlg,jack-ins-deb : Debounce time for jack insertion (ms) - [<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>] -- dlg,jack-det-rate: Jack type detection latency (3/4 pole) - ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"] -- dlg,jack-rem-deb : Debounce time for jack removal (ms) - [<1>, <5>, <10>, <20>] -- dlg,a-d-btn-thr : Impedance threshold between buttons A and D - [0x0 - 0xFF] -- dlg,d-b-btn-thr : Impedance threshold between buttons D and B - [0x0 - 0xFF] -- dlg,b-c-btn-thr : Impedance threshold between buttons B and C - [0x0 - 0xFF] -- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic - [0x0 - 0xFF] -- dlg,btn-avg : Number of 8-bit readings for averaged button measurement - [<1>, <2>, <4>, <8>] -- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement - [<1>, <2>, <4>, <8>] - -====== - -Example: - - codec: da7219@1a { - compatible = "dlg,da7219"; - reg = <0x1a>; - - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - - VDD-supply = <&reg_audio>; - VDDMIC-supply = <&reg_audio>; - VDDIO-supply = <&reg_audio>; - - #clock-cells = <1>; - clock-output-names = "dai-wclk", "dai-bclk"; - - clocks = <&clks 201>; - clock-names = "mclk"; - - dlg,ldo-lvl = <1200>; - dlg,micbias-lvl = <2600>; - dlg,mic-amp-in-sel = "diff"; - - da7219_aad { - dlg,btn-cfg = <50>; - dlg,mic-det-thr = <500>; - dlg,jack-ins-deb = <20>; - dlg,jack-det-rate = "32ms_64ms"; - dlg,jack-rem-deb = <1>; - - dlg,a-d-btn-thr = <0xa>; - dlg,d-b-btn-thr = <0x16>; - dlg,b-c-btn-thr = <0x21>; - dlg,c-mic-btn-thr = <0x3E>; - - dlg,btn-avg = <4>; - dlg,adc-1bit-rpt = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml new file mode 100644 index 000000000000..5015f5797901 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA7219 Audio Codec + +maintainers: + - David Rau David.Rau.opensource@dm.renesas.com + +description: + The DA7219 is an ultra low-power audio codec with + in-built advanced accessory detection (AAD) for mobile + computing and accessory applications, which supports + sample rates up to 96 kHz at 24-bit resolution. + +properties: + compatible: + const: dlg,da7219 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + VDD-supply: + description: + VDD power supply for the device. + + VDDMIC-supply: + description: + VDDMIC power supply for the device. + + VDDIO-supply: + description: + VDDIO power supply for the device. + + interrupt-names: + oneOf: + - items: + - const: wakeup + - items: + - const: irq + description: + Name associated with interrupt line. + Should be "wakeup" if interrupt is to be used to wake system, + otherwise "irq" should be used. + + wakeup-source: + type: boolean + description: + Flag to indicate this device can wake system (suspend/resume). + + "#clock-cells": + const: 1 + + clock-output-names: + minItems: 2 + maxItems: 2 + description: + Name given for DAI word clock and bit clock outputs. + + clocks: + description: + phandle and clock specifier for codec MCLK. + + clock-names: + const: mclk + + dlg,micbias-lvl: + enum: [1600, 1800, 2000, 2200, 2400, 2600] + description: + Voltage (mV) for Mic Bias. + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,mic-amp-in-sel: + enum: ["diff", "se_p", "se_n"] + description: + Mic input source type. + + diff - Differential. + + se_p - MIC_P. + Positive differential analog microphone input. + + se_n - MIC_N. + Negative differential analog microphone input. + $ref: /schemas/types.yaml#/definitions/string + + da7219_aad: + type: object + description: + Configuration of advanced accessory detection. + properties: + dlg,micbias-pulse-lvl: + enum: [2800, 2900] + description: + Mic bias higher voltage pulse level (mV). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,micbias-pulse-time: + description: + Mic bias higher voltage pulse duration (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + + dlg,btn-cfg: + enum: [2, 5, 10, 50, 100, 200, 500] + description: + Periodic button press measurements for 4-pole jack (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,mic-det-thr: + enum: [200, 500, 750, 1000] + description: + Impedance threshold for mic detection measurement (Ohms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,jack-ins-deb: + enum: [5, 10, 20, 50, 100, 200, 500, 1000] + description: + Debounce time for jack insertion (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,jack-det-rate: + enum: ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"] + description: + Jack type detection latency (3/4 pole). + $ref: /schemas/types.yaml#/definitions/string + + dlg,jack-rem-deb: + enum: [1, 5, 10, 20] + description: + Debounce time for jack removal (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,a-d-btn-thr: + description: + Impedance threshold between buttons A and D. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,d-b-btn-thr: + description: + Impedance threshold between buttons D and B. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,b-c-btn-thr: + description: + Impedance threshold between buttons B and C. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,c-mic-btn-thr: + description: + Impedance threshold between button C and Mic. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,btn-avg: + enum: [1, 2, 4, 8] + description: + Number of 8-bit readings for averaged button measurement. + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,adc-1bit-rpt: + enum: [1, 2, 4, 8] + description: + Repeat count for 1-bit button measurement. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - interrupts + - VDD-supply + - VDDMIC-supply + - VDDIO-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec: da7219@1a { + compatible = "dlg,da7219"; + reg = <0x1a>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + VDD-supply = <&vdd_reg>; + VDDMIC-supply = <&vddmic_reg>; + VDDIO-supply = <&vddio_reg>; + + #clock-cells = <1>; + clock-output-names = "dai-wclk", "dai-bclk"; + + clocks = <&clks 201>; + clock-names = "mclk"; + + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + + da7219_aad { + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + + dlg,btn-avg = <4>; + dlg,adc-1bit-rpt = <1>; + }; + }; + };