The patch

ASoC: rsnd: Fix possible NULL pointer dereference

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

From e8dffe6c2004278c588b3bb441a3dbe998a3f2e4 Mon Sep 17 00:00:00 2001

From: Marek Vasut marek.vasut+renesas@gmail.com Date: Fri, 21 Apr 2017 00:41:20 +0000 Subject: [PATCH] ASoC: rsnd: Fix possible NULL pointer dereference

25165f79adc76b812bfb4d8f2ab120aafb28d0e6 ("ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHz") supports both 44.1kHz/48kHz clock-frequency settings for ADG which will be used for AUDIO_OLKOUTn. But some board doesn't need it, thus, it is not mandatory.

But, above patch didn't care about the case of "clock-frequency" DT property was not present. This patch ignores ADG settings if AUDIO_OLKOUTn was not used.

Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com [Kuninori: tidyup not to break non AUDIO_OLKOUTn case] Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/sh/rcar/adg.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index faa1a4f09766..66203d107a11 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -453,13 +453,18 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, [CLKI] = 0x2, };

- of_property_read_u32(np, "#clock-cells", &count); + ckr = 0; + rbga = 2; /* default 1/6 */ + rbgb = 2; /* default 1/6 */

/* * ADG supports BRRA/BRRB output only * this means all clkout0/1/2/3 will be same rate */ prop = of_find_property(np, "clock-frequency", NULL); + if (!prop) + goto rsnd_adg_get_clkout_end; + req_size = prop->length / sizeof(u32);

of_property_read_u32_array(np, "clock-frequency", req_rate, req_size); @@ -472,6 +477,9 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, req_48kHz_rate = req_rate[i]; }

+ if (req_rate[0] % 48000 == 0) + adg->flags = AUDIO_OUT_48; + /* * This driver is assuming that AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC * have 44.1kHz or 48kHz base clocks for now. @@ -481,9 +489,6 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, * rsnd_adg_ssi_clk_try_start() * rsnd_ssi_master_clk_start() */ - ckr = 0; - rbga = 2; /* default 1/6 */ - rbgb = 2; /* default 1/6 */ adg->rbga_rate_for_441khz = 0; adg->rbgb_rate_for_48khz = 0; for_each_rsnd_clk(clk, adg, i) { @@ -528,6 +533,7 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, * this means all clkout0/1/2/3 will be * same rate */

+ of_property_read_u32(np, "#clock-cells", &count); /* * for clkout */ @@ -557,13 +563,11 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, &adg->onecell); }

+rsnd_adg_get_clkout_end: adg->ckr = ckr; adg->rbga = rbga; adg->rbgb = rbgb;

- if (req_rate[0] % 48000 == 0) - adg->flags = AUDIO_OUT_48; - for_each_rsnd_clkout(clk, adg, i) dev_dbg(dev, "clkout %d : %p : %ld\n", i, clk, clk_get_rate(clk)); dev_dbg(dev, "BRGCKR = 0x%08x, BRRA/BRRB = 0x%x/0x%x\n",