The jack creation code was in rt5670 codec driver before due to the jack resources (gpio/irq) were defined under the node of codec device in ACPI on Braswell. We used the snd_soc_jack_new() to create a jack instance.

But now snd_soc_jack_new() is removed from upstream and we can't use snd_soc_card_jack_new() in codec driver, so we move the jack creation code to machine driver and pass the jack instance to codec driver for further processing.

Signed-off-by: Bard Liao bardliao@realtek.com Signed-off-by: Jin Yao yao.jin@linux.intel.com --- sound/soc/intel/cht_bsw_rt5672.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)

diff --git a/sound/soc/intel/cht_bsw_rt5672.c b/sound/soc/intel/cht_bsw_rt5672.c index c41fae3..4204fc4 100644 --- a/sound/soc/intel/cht_bsw_rt5672.c +++ b/sound/soc/intel/cht_bsw_rt5672.c @@ -22,6 +22,7 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> +#include <sound/jack.h> #include "../codecs/rt5670.h" #include "sst-atom-controls.h"

@@ -29,6 +30,20 @@ #define CHT_PLAT_CLK_3_HZ 19200000 #define CHT_CODEC_DAI "rt5670-aif1"

+static struct snd_soc_jack cht_bsw_headset; + +/* Headset jack detection DAPM pins */ +static struct snd_soc_jack_pin cht_bsw_headset_pins[] = { + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, +}; + static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card) { int i; @@ -178,6 +193,15 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) | RT5670_AD_MONO_L_FILTER | RT5670_AD_MONO_R_FILTER, RT5670_CLK_SEL_I2S1_ASRC); + + ret = snd_soc_card_jack_new(runtime->card, "Headset", + SND_JACK_HEADSET | SND_JACK_BTN_0 | + SND_JACK_BTN_1 | SND_JACK_BTN_2, &cht_bsw_headset, + cht_bsw_headset_pins, ARRAY_SIZE(cht_bsw_headset_pins)); + if (ret) + return ret; + + rt5670_set_jack_detect(codec, &cht_bsw_headset); return 0; }