[alsa-devel] [RFC PATCH] ASoC: omap-mcbsp: Add support for highter rate up to 384000
Add support for highter rate up to 384000Khz. There are codecs in the market that can play up to this frequency. Test was done just with:
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000)
playing wav file 32bit/192000Khz stereo. Some glitch has observed but this should depend on the selected min buffer bytes that was left untouched in aplay and in the omap-pcm driver.
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com --- sound/soc/omap/omap-mcbsp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..1e95f6a 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \ + SNDRV_PCM_RATE_CONTINUOUS | \ + SNDRV_PCM_RATE_KNOT)
#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -574,11 +576,15 @@ static struct snd_soc_dai_driver omap_mcbsp_dai = { .channels_max = 16, .rates = OMAP_MCBSP_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, + .rate_min = 8000, + .rate_max = 384000, }, .capture = { .channels_min = 1, .channels_max = 16, .rates = OMAP_MCBSP_RATES, + .rate_min = 8000, + .rate_max = 384000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, }, .ops = &mcbsp_dai_ops,
On 08/07/2013 09:28 PM, Michael Trimarchi wrote:
Add support for highter rate up to 384000Khz. There are codecs in the market that can play up to this frequency. Test was done just with:
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000)
playing wav file 32bit/192000Khz stereo. Some glitch has observed but this should depend on the selected min buffer bytes that was left untouched in aplay and in the omap-pcm driver.
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
sound/soc/omap/omap-mcbsp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..1e95f6a 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \
I think only this change is enough for what you want to achieve.
SNDRV_PCM_RATE_CONTINUOUS | \SNDRV_PCM_RATE_KNOT)
The _KNOT is for sure not needed and I would not set the CONTINUOUS either.
#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -574,11 +576,15 @@ static struct snd_soc_dai_driver omap_mcbsp_dai = { .channels_max = 16, .rates = OMAP_MCBSP_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
.rate_min = 8000,.rate_max = 384000,
Why you want to limit the rates here?
}, .capture = { .channels_min = 1, .channels_max = 16, .rates = OMAP_MCBSP_RATES,
.rate_min = 8000,.rate_max = 384000,
Same here, do not set these.
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,}, .ops = &mcbsp_dai_ops,
Hi
On Thu, Aug 08, 2013 at 01:51:25PM +0300, Peter Ujfalusi wrote:
On 08/07/2013 09:28 PM, Michael Trimarchi wrote:
Add support for highter rate up to 384000Khz. There are codecs in the market that can play up to this frequency. Test was done just with:
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000)
playing wav file 32bit/192000Khz stereo. Some glitch has observed but this should depend on the selected min buffer bytes that was left untouched in aplay and in the omap-pcm driver.
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
sound/soc/omap/omap-mcbsp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..1e95f6a 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \
I think only this change is enough for what you want to achieve.
SNDRV_PCM_RATE_CONTINUOUS | \SNDRV_PCM_RATE_KNOT)The _KNOT is for sure not needed and I would not set the CONTINUOUS either.
pcm5102pw is a codec that support 384000 rate so I think that PCM_RATE_KNOT is requested for such rate. Correct?
#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -574,11 +576,15 @@ static struct snd_soc_dai_driver omap_mcbsp_dai = { .channels_max = 16, .rates = OMAP_MCBSP_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
.rate_min = 8000,.rate_max = 384000,Why you want to limit the rates here?
I didn't find in the market somenthing up to 384000.
Michael
}, .capture = { .channels_min = 1, .channels_max = 16, .rates = OMAP_MCBSP_RATES,
.rate_min = 8000,.rate_max = 384000,Same here, do not set these.
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,}, .ops = &mcbsp_dai_ops,
-- Péter
On 08/08/2013 02:04 PM, Michael Trimarchi wrote:
On Thu, Aug 08, 2013 at 01:51:25PM +0300, Peter Ujfalusi wrote:
On 08/07/2013 09:28 PM, Michael Trimarchi wrote:
Add support for highter rate up to 384000Khz. There are codecs in the market that can play up to this frequency. Test was done just with:
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000)
playing wav file 32bit/192000Khz stereo. Some glitch has observed but this should depend on the selected min buffer bytes that was left untouched in aplay and in the omap-pcm driver.
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
sound/soc/omap/omap-mcbsp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..1e95f6a 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \
I think only this change is enough for what you want to achieve.
SNDRV_PCM_RATE_CONTINUOUS | \SNDRV_PCM_RATE_KNOT)The _KNOT is for sure not needed and I would not set the CONTINUOUS either.
pcm5102pw is a codec that support 384000 rate so I think that PCM_RATE_KNOT is requested for such rate. Correct?
Yes, looks that way. I had overlooked the 384000 KHz...
#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -574,11 +576,15 @@ static struct snd_soc_dai_driver omap_mcbsp_dai = { .channels_max = 16, .rates = OMAP_MCBSP_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
.rate_min = 8000,.rate_max = 384000,Why you want to limit the rates here?
I didn't find in the market somenthing up to 384000.
Sure, but it is not correct to say that McBSP supports rates up to 384000. McBSP have constraint on the BCLK speed up to 48MHz. So while 32bit/stereo/384000 is OK, 32bit/4channel/384000 is not, but 16bit/4channel/384000 is again good. When McBSP is master we have a check for the clock speed. We might need to have similar for McBSP slave mode, but I don't think we are going to hit the 48MHz limit anyways.
Michael
}, .capture = { .channels_min = 1, .channels_max = 16, .rates = OMAP_MCBSP_RATES,
.rate_min = 8000,.rate_max = 384000,Same here, do not set these.
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,}, .ops = &mcbsp_dai_ops,
-- Péter
Hi
On Fri, Aug 09, 2013 at 08:18:23AM +0300, Peter Ujfalusi wrote:
On 08/08/2013 02:04 PM, Michael Trimarchi wrote:
On Thu, Aug 08, 2013 at 01:51:25PM +0300, Peter Ujfalusi wrote:
On 08/07/2013 09:28 PM, Michael Trimarchi wrote:
Add support for highter rate up to 384000Khz. There are codecs in the market that can play up to this frequency. Test was done just with:
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000)
playing wav file 32bit/192000Khz stereo. Some glitch has observed but this should depend on the selected min buffer bytes that was left untouched in aplay and in the omap-pcm driver.
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
sound/soc/omap/omap-mcbsp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..1e95f6a 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \
I think only this change is enough for what you want to achieve.
SNDRV_PCM_RATE_CONTINUOUS | \SNDRV_PCM_RATE_KNOT)The _KNOT is for sure not needed and I would not set the CONTINUOUS either.
pcm5102pw is a codec that support 384000 rate so I think that PCM_RATE_KNOT is requested for such rate. Correct?
Yes, looks that way. I had overlooked the 384000 KHz...
Ok, I will do it better
#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -574,11 +576,15 @@ static struct snd_soc_dai_driver omap_mcbsp_dai = { .channels_max = 16, .rates = OMAP_MCBSP_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
.rate_min = 8000,.rate_max = 384000,Why you want to limit the rates here?
I didn't find in the market somenthing up to 384000.
Sure, but it is not correct to say that McBSP supports rates up to 384000. McBSP have constraint on the BCLK speed up to 48MHz. So while 32bit/stereo/384000 is OK, 32bit/4channel/384000 is not, but 16bit/4channel/384000 is again good. When McBSP is master we have a check for the clock speed. We might need to have similar for McBSP slave mode, but I don't think we are going to hit the 48MHz limit anyways.
Should be possible to consider this limitation of the McBSP clock speed. I'm going to take a look on this. I will send another patch
Michael
Michael
}, .capture = { .channels_min = 1, .channels_max = 16, .rates = OMAP_MCBSP_RATES,
.rate_min = 8000,.rate_max = 384000,Same here, do not set these.
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,}, .ops = &mcbsp_dai_ops,
-- Péter
-- Péter
Hi Peter
On Fri, Aug 09, 2013 at 08:18:23AM +0300, Peter Ujfalusi wrote:
On 08/08/2013 02:04 PM, Michael Trimarchi wrote:
On Thu, Aug 08, 2013 at 01:51:25PM +0300, Peter Ujfalusi wrote:
On 08/07/2013 09:28 PM, Michael Trimarchi wrote:
Add support for highter rate up to 384000Khz. There are codecs in the market that can play up to this frequency. Test was done just with:
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000)
playing wav file 32bit/192000Khz stereo. Some glitch has observed but this should depend on the selected min buffer bytes that was left untouched in aplay and in the omap-pcm driver.
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
sound/soc/omap/omap-mcbsp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..1e95f6a 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \
I think only this change is enough for what you want to achieve.
SNDRV_PCM_RATE_CONTINUOUS | \SNDRV_PCM_RATE_KNOT)The _KNOT is for sure not needed and I would not set the CONTINUOUS either.
pcm5102pw is a codec that support 384000 rate so I think that PCM_RATE_KNOT is requested for such rate. Correct?
Yes, looks that way. I had overlooked the 384000 KHz...
#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -574,11 +576,15 @@ static struct snd_soc_dai_driver omap_mcbsp_dai = { .channels_max = 16, .rates = OMAP_MCBSP_RATES, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
.rate_min = 8000,.rate_max = 384000,Why you want to limit the rates here?
I didn't find in the market somenthing up to 384000.
Sure, but it is not correct to say that McBSP supports rates up to 384000. McBSP have constraint on the BCLK speed up to 48MHz. So while 32bit/stereo/384000 is OK, 32bit/4channel/384000 is not, but 16bit/4channel/384000 is again good. When McBSP is master we have a check for the clock speed. We might need to have similar for McBSP slave mode, but I don't think we are going to hit the 48MHz limit anyways.
I found some time but I can't not test this patch now ;) too far from my office. The idea is to check with MAX_BCLK. There are two points that should cover slave and master mode. Is it the right direction? BTW Do you think that is better to have at soc level as a new constraint?
Michael
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..ea95ad2 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_MAX_BCLK 48000000 +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \ + SNDRV_PCM_RATE_KNOT)
#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -225,10 +227,14 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; struct snd_dmaengine_dai_dma_data *dma_data; - int wlen, channels, wpf; + int wlen, channels, wpf, bclk; int pkt_size = 0; unsigned int format, div, framesize, master;
+ bclk = snd_soc_params_to_bclk(params); + if (bclk < 0 || bclk > OMAP_MCBSP_MAX_BCLK) + return -EINVAL; + dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); channels = params_channels(params);
@@ -326,7 +332,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, /* In McBSP master modes, FRAME (i.e. sample rate) is generated * by _counting_ BCLKs. Calculate frame size in BCLKs */ master = mcbsp->fmt & SND_SOC_DAIFMT_MASTER_MASK; - if (master == SND_SOC_DAIFMT_CBS_CFS) { + if (master == SND_SOC_DAIFMT_CBS_CFS) { div = mcbsp->clk_div ? mcbsp->clk_div : 1; framesize = (mcbsp->in_freq / div) / params_rate(params);
@@ -500,6 +506,9 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, return -EBUSY; }
+ if (freq > OMAP_MCBSP_MAX_BCLK) + return -EINVAL; + mcbsp->in_freq = freq; regs->srgr2 &= ~CLKSM; regs->pcr0 &= ~SCLKME;
Michael
}, .capture = { .channels_min = 1, .channels_max = 16, .rates = OMAP_MCBSP_RATES,
.rate_min = 8000,.rate_max = 384000,Same here, do not set these.
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,}, .ops = &mcbsp_dai_ops,
-- Péter
-- Péter
On 08/10/2013 10:53 AM, Michael Trimarchi wrote:
I found some time but I can't not test this patch now ;) too far from my office. The idea is to check with MAX_BCLK. There are two points that should cover slave and master mode. Is it the right direction? BTW Do you think that is better to have at soc level as a new constraint?
I would not bother with the bclk check for now. We did not had issues so far and 48MHz is quite high anyways for our users so far.
Michael
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..ea95ad2 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_MAX_BCLK 48000000 +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \
SNDRV_PCM_RATE_KNOT)#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -225,10 +227,14 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; struct snd_dmaengine_dai_dma_data *dma_data;
- int wlen, channels, wpf;
int wlen, channels, wpf, bclk; int pkt_size = 0; unsigned int format, div, framesize, master;
bclk = snd_soc_params_to_bclk(params);
if (bclk < 0 || bclk > OMAP_MCBSP_MAX_BCLK)
return -EINVAL;dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); channels = params_channels(params);
@@ -326,7 +332,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, /* In McBSP master modes, FRAME (i.e. sample rate) is generated * by _counting_ BCLKs. Calculate frame size in BCLKs */ master = mcbsp->fmt & SND_SOC_DAIFMT_MASTER_MASK;
- if (master == SND_SOC_DAIFMT_CBS_CFS) {
- if (master == SND_SOC_DAIFMT_CBS_CFS) { div = mcbsp->clk_div ? mcbsp->clk_div : 1; framesize = (mcbsp->in_freq / div) / params_rate(params);
@@ -500,6 +506,9 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, return -EBUSY; }
- if (freq > OMAP_MCBSP_MAX_BCLK)
return -EINVAL;- mcbsp->in_freq = freq; regs->srgr2 &= ~CLKSM; regs->pcr0 &= ~SCLKME;
Michael
}, .capture = { .channels_min = 1, .channels_max = 16, .rates = OMAP_MCBSP_RATES,
.rate_min = 8000,.rate_max = 384000,Same here, do not set these.
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,}, .ops = &mcbsp_dai_ops,
-- Péter
-- Péter
Hi
On 08/12/2013 05:36 PM, Peter Ujfalusi wrote:
On 08/10/2013 10:53 AM, Michael Trimarchi wrote:
I found some time but I can't not test this patch now ;) too far from my office. The idea is to check with MAX_BCLK. There are two points that should cover slave and master mode. Is it the right direction? BTW Do you think that is better to have at soc level as a new constraint?
I would not bother with the bclk check for now. We did not had issues so far and 48MHz is quite high anyways for our users so far.
Right now I'm working on 2 device that they need to support 384Khz 32bit stereo playback/recording and next dsd512, but we can skip this test. Check is only for consistency anyway and it doesn't cost so much in time. I will prepare a new patch and send without it.
Michael
Michael
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 7483efb..ea95ad2 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -39,7 +39,9 @@ #include "mcbsp.h" #include "omap-mcbsp.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000) +#define OMAP_MCBSP_MAX_BCLK 48000000 +#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_192000 | \
SNDRV_PCM_RATE_KNOT)#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \ xhandler_get, xhandler_put) \ @@ -225,10 +227,14 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai); struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs; struct snd_dmaengine_dai_dma_data *dma_data;
- int wlen, channels, wpf;
int wlen, channels, wpf, bclk; int pkt_size = 0; unsigned int format, div, framesize, master;
bclk = snd_soc_params_to_bclk(params);
if (bclk < 0 || bclk > OMAP_MCBSP_MAX_BCLK)
return -EINVAL;dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); channels = params_channels(params);
@@ -326,7 +332,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, /* In McBSP master modes, FRAME (i.e. sample rate) is generated * by _counting_ BCLKs. Calculate frame size in BCLKs */ master = mcbsp->fmt & SND_SOC_DAIFMT_MASTER_MASK;
- if (master == SND_SOC_DAIFMT_CBS_CFS) {
- if (master == SND_SOC_DAIFMT_CBS_CFS) { div = mcbsp->clk_div ? mcbsp->clk_div : 1; framesize = (mcbsp->in_freq / div) / params_rate(params);
@@ -500,6 +506,9 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, return -EBUSY; }
- if (freq > OMAP_MCBSP_MAX_BCLK)
return -EINVAL;- mcbsp->in_freq = freq; regs->srgr2 &= ~CLKSM; regs->pcr0 &= ~SCLKME;
Michael
}, .capture = { .channels_min = 1, .channels_max = 16, .rates = OMAP_MCBSP_RATES,
.rate_min = 8000,.rate_max = 384000,Same here, do not set these.
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,}, .ops = &mcbsp_dai_ops,
-- Péter
-- Péter
participants (2)
-
Michael Trimarchi -
Peter Ujfalusi