[alsa-devel] [PATCH] hda-intel: Add Quanta IL1 ALC267 model
This adds support for Quanta IL1 mini-notebook to alsa, defining a new model for it. It comes with an ALC267 codec chip. Some notes about this model:
* In headphone automute, I use AC_VERB_SET_PIN_WIDGET_CONTROL instead of common amp mute, to avoid conflict with mixer switch (mixer and automute use the same nid). * The only connected capture sources in the hardware are the internal mic and external mic jack. So instead of using an input source selector like on other ALC268 models, the mic automute automatically switch between captures.
Signed-off-by: Herton Ronaldo Krzesinski herton@mandriva.com
diff -p -up alsa-kernel/Documentation/ALSA-Configuration.txt.orig alsa-kernel/Documentation/ALSA-Configuration.txt --- alsa-kernel/Documentation/ALSA-Configuration.txt.orig 2008-03-25 16:30:07.000000000 -0300 +++ alsa-kernel/Documentation/ALSA-Configuration.txt 2008-03-25 16:33:52.000000000 -0300 @@ -829,7 +829,8 @@ Prior to version 0.9.0rc4 options had a basic fixed pin assignment w/o SPDIF auto auto-config reading BIOS (default)
- ALC268 + ALC267/268 + quanta-il1 Quanta IL1 mini-notebook 3stack 3-stack model toshiba Toshiba A205 acer Acer laptops diff -p -up alsa-kernel/pci/hda/patch_realtek.c.orig alsa-kernel/pci/hda/patch_realtek.c --- alsa-kernel/pci/hda/patch_realtek.c.orig 2008-03-25 16:30:07.000000000 -0300 +++ alsa-kernel/pci/hda/patch_realtek.c 2008-03-25 16:33:52.000000000 -0300 @@ -105,6 +105,7 @@ enum {
/* ALC268 models */ enum { + ALC267_QUANTA_IL1, ALC268_3ST, ALC268_TOSHIBA, ALC268_ACER, @@ -9896,6 +9897,64 @@ static void alc268_dell_unsol_event(stru
#define alc268_dell_init_hook alc268_dell_automute
+static struct snd_kcontrol_new alc267_quanta_il1_mixer[] = { + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x2, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Capture Volume", 0x23, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Mic Capture Switch", 0x23, 2, HDA_OUTPUT), + HDA_CODEC_VOLUME("Ext Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT), + { } +}; + +static struct hda_verb alc267_quanta_il1_verbs[] = { + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_MIC_EVENT | AC_USRSP_EN}, + { } +}; + +static void alc267_quanta_il1_hp_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, + present ? 0 : PIN_OUT); +} + +static void alc267_quanta_il1_mic_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x18, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_write(codec, 0x23, 0, + AC_VERB_SET_CONNECT_SEL, + present ? 0x00 : 0x01); +} + +static void alc267_quanta_il1_automute(struct hda_codec *codec) +{ + alc267_quanta_il1_hp_automute(codec); + alc267_quanta_il1_mic_automute(codec); +} + +static void alc267_quanta_il1_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case ALC880_HP_EVENT: + alc267_quanta_il1_hp_automute(codec); + break; + case ALC880_MIC_EVENT: + alc267_quanta_il1_mic_automute(codec); + break; + } +} + /* * generic initialization of ADC, input mixers and output mixers */ @@ -10318,6 +10377,7 @@ static void alc268_auto_init(struct hda_ * configuration and preset */ static const char *alc268_models[ALC268_MODEL_LAST] = { + [ALC267_QUANTA_IL1] = "quanta-il1", [ALC268_3ST] = "3stack", [ALC268_TOSHIBA] = "toshiba", [ALC268_ACER] = "acer", @@ -10340,11 +10400,27 @@ static struct snd_pci_quirk alc268_cfg_t SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA), SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA), SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER), + SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1), SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO), {} };
static struct alc_config_preset alc268_presets[] = { + [ALC267_QUANTA_IL1] = { + .mixers = { alc267_quanta_il1_mixer }, + .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs, + alc267_quanta_il1_verbs }, + .num_dacs = ARRAY_SIZE(alc268_dac_nids), + .dac_nids = alc268_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt), + .adc_nids = alc268_adc_nids_alt, + .hp_nid = 0x03, + .num_channel_mode = ARRAY_SIZE(alc268_modes), + .channel_mode = alc268_modes, + .input_mux = &alc268_capture_source, + .unsol_event = alc267_quanta_il1_unsol_event, + .init_hook = alc267_quanta_il1_automute, + }, [ALC268_3ST] = { .mixers = { alc268_base_mixer, alc268_capture_alt_mixer, alc268_beep_mixer },
Em Tuesday 25 March 2008 17:31:28 Herton Ronaldo Krzesinski escreveu:
This adds support for Quanta IL1 mini-notebook to alsa, defining a new model for it. It comes with an ALC267 codec chip. Some notes about this model:
- In headphone automute, I use AC_VERB_SET_PIN_WIDGET_CONTROL instead of common amp mute, to avoid conflict with mixer switch (mixer and automute use the same nid).
- The only connected capture sources in the hardware are the internal mic and external mic jack. So instead of using an input source selector like on other ALC268 models, the mic automute automatically switch between captures.
Signed-off-by: Herton Ronaldo Krzesinski herton@mandriva.com
codec info for reference:
Codec: Realtek ALC267 Address: 0 Vendor Id: 0x10ec0267 Subsystem Id: 0x152d0771 Revision Id: 0x100002 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Audio Input] wcaps 0x100111: Stereo Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x24 Node 0x08 [Audio Input] wcaps 0x100111: Stereo Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] Connection: 1 0x02 Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x1d Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x80 0x80] Connection: 3 0x03 0x1d 0x02 Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081003c: IN OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0f Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081003c: IN OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0121401f: [Jack] HP Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=04, enabled=1 Connection: 1 0x10 Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 1 0x0e Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0 Amp-In vals: [0x01 0x01] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19820: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x02 Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0 Amp-In vals: Pincap 0x083724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x99a3092e: [Fixed] Mic at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x2, Sequence = 0xe Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x02 Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x4016862d: [N/A] Speaker at Ext N/A Conn = Digital, Color = Purple DefAssociation = 0x2, Sequence = 0xd Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital Pincap 0x0810: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=10 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x98 0x98] Connection: 7 0x18 0x19* 0x1a 0x1c 0x14 0x15 0x12 Node 0x24 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x98 0x98] Connection: 6 0x18 0x19 0x1a 0x1c 0x14 0x15
At Tue, 25 Mar 2008 17:31:28 -0300, Herton Ronaldo Krzesinski wrote:
This adds support for Quanta IL1 mini-notebook to alsa, defining a new model for it. It comes with an ALC267 codec chip. Some notes about this model:
- In headphone automute, I use AC_VERB_SET_PIN_WIDGET_CONTROL instead of common amp mute, to avoid conflict with mixer switch (mixer and automute use the same nid).
- The only connected capture sources in the hardware are the internal mic and external mic jack. So instead of using an input source selector like on other ALC268 models, the mic automute automatically switch between captures.
Signed-off-by: Herton Ronaldo Krzesinski herton@mandriva.com
Applied to ALSA tree. Thanks.
Takashi
participants (2)
-
Herton Ronaldo Krzesinski -
Takashi Iwai