[alsa-devel] [PATCH 1/3] ASoC: fsl_esai: Add driver suspend and resume to support MEGA Fast
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power source of modules during system suspend and resume procedure. Thus, SAI needs to save all the values of registers before the system suspend and restore them after the system resume.
Signed-off-by: Zidan Wang zidan.wang@freescale.com --- sound/soc/fsl/fsl_esai.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index 5c75971..b749a29 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -684,6 +684,32 @@ static bool fsl_esai_readable_reg(struct device *dev, unsigned int reg) } }
+static bool fsl_esai_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case REG_ESAI_ETDR: + case REG_ESAI_ERDR: + case REG_ESAI_ESR: + case REG_ESAI_TFSR: + case REG_ESAI_RFSR: + case REG_ESAI_TX0: + case REG_ESAI_TX1: + case REG_ESAI_TX2: + case REG_ESAI_TX3: + case REG_ESAI_TX4: + case REG_ESAI_TX5: + case REG_ESAI_RX0: + case REG_ESAI_RX1: + case REG_ESAI_RX2: + case REG_ESAI_RX3: + case REG_ESAI_SAISR: + return true; + default: + return false; + } + +} + static bool fsl_esai_writeable_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -722,7 +748,9 @@ static const struct regmap_config fsl_esai_regmap_config = {
.max_register = REG_ESAI_PCRC, .readable_reg = fsl_esai_readable_reg, + .volatile_reg = fsl_esai_volatile_reg, .writeable_reg = fsl_esai_writeable_reg, + .cache_type = REGCACHE_RBTREE, };
static int fsl_esai_probe(struct platform_device *pdev) @@ -853,10 +881,51 @@ static const struct of_device_id fsl_esai_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, fsl_esai_dt_ids);
+#if CONFIG_PM_SLEEP +static int fsl_esai_suspend(struct device *dev) +{ + struct fsl_esai *esai = dev_get_drvdata(dev); + + regcache_cache_only(esai->regmap, true); + regcache_mark_dirty(esai->regmap); + + return 0; +} + +static int fsl_esai_resume(struct device *dev) +{ + struct fsl_esai *esai = dev_get_drvdata(dev); + int ret; + + regcache_cache_only(esai->regmap, false); + + /* FIFO reset for safety */ + regmap_update_bits(esai->regmap, REG_ESAI_TFCR, + ESAI_xFCR_xFR, ESAI_xFCR_xFR); + regmap_update_bits(esai->regmap, REG_ESAI_RFCR, + ESAI_xFCR_xFR, ESAI_xFCR_xFR); + + ret = regcache_sync(esai->regmap); + if (ret) + return ret; + + /* FIFO reset done */ + regmap_update_bits(esai->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0); + regmap_update_bits(esai->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops fsl_esai_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fsl_esai_suspend, fsl_esai_resume) +}; + static struct platform_driver fsl_esai_driver = { .probe = fsl_esai_probe, .driver = { .name = "fsl-esai-dai", + .pm = &fsl_esai_pm_ops, .of_match_table = fsl_esai_dt_ids, }, };
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power source of modules during system suspend and resume procedure. Thus, SAI needs to save all the values of registers before the system suspend and restore them after the system resume.
Signed-off-by: Zidan Wang zidan.wang@freescale.com --- sound/soc/fsl/fsl_spdif.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 8e93221..caf20d1 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -300,6 +300,8 @@ static int spdif_softreset(struct fsl_spdif_priv *spdif_priv) struct regmap *regmap = spdif_priv->regmap; u32 val, cycle = 1000;
+ regcache_cache_bypass(regmap, true); + regmap_write(regmap, REG_SPDIF_SCR, SCR_SOFT_RESET);
/* @@ -310,6 +312,10 @@ static int spdif_softreset(struct fsl_spdif_priv *spdif_priv) regmap_read(regmap, REG_SPDIF_SCR, &val); } while ((val & SCR_SOFT_RESET) && cycle--);
+ regcache_cache_bypass(regmap, false); + regcache_mark_dirty(regmap); + regcache_sync(regmap); + if (cycle) return 0; else @@ -1013,6 +1019,26 @@ static bool fsl_spdif_readable_reg(struct device *dev, unsigned int reg) } }
+static bool fsl_spdif_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case REG_SPDIF_SIS: + case REG_SPDIF_SRL: + case REG_SPDIF_SRR: + case REG_SPDIF_SRCSH: + case REG_SPDIF_SRCSL: + case REG_SPDIF_SRU: + case REG_SPDIF_SRQ: + case REG_SPDIF_STL: + case REG_SPDIF_STR: + case REG_SPDIF_SRFM: + return true; + default: + return false; + } + +} + static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -1039,7 +1065,9 @@ static const struct regmap_config fsl_spdif_regmap_config = {
.max_register = REG_SPDIF_STC, .readable_reg = fsl_spdif_readable_reg, + .volatile_reg = fsl_spdif_volatile_reg, .writeable_reg = fsl_spdif_writeable_reg, + .cache_type = REGCACHE_RBTREE, };
static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv, @@ -1262,6 +1290,30 @@ static int fsl_spdif_probe(struct platform_device *pdev) return ret; }
+#ifdef CONFIG_PM_SLEEP +static int fsl_spdif_suspend(struct device *dev) +{ + struct fsl_spdif_priv *spdif_priv = dev_get_drvdata(dev); + + regcache_cache_only(spdif_priv->regmap, true); + regcache_mark_dirty(spdif_priv->regmap); + + return 0; +} + +static int fsl_spdif_resume(struct device *dev) +{ + struct fsl_spdif_priv *spdif_priv = dev_get_drvdata(dev); + + regcache_cache_only(spdif_priv->regmap, false); + return regcache_sync(spdif_priv->regmap); +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops fsl_spdif_pm = { + SET_SYSTEM_SLEEP_PM_OPS(fsl_spdif_suspend, fsl_spdif_resume) +}; + static const struct of_device_id fsl_spdif_dt_ids[] = { { .compatible = "fsl,imx35-spdif", }, { .compatible = "fsl,vf610-spdif", }, @@ -1273,6 +1325,7 @@ static struct platform_driver fsl_spdif_driver = { .driver = { .name = "fsl-spdif-dai", .of_match_table = fsl_spdif_dt_ids, + .pm = &fsl_spdif_pm, }, .probe = fsl_spdif_probe, };
On Mon, Jul 6, 2015 at 6:50 AM, Zidan Wang zidan.wang@freescale.com wrote:
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power source of modules during system suspend and resume procedure. Thus, SAI needs to save
s/SAI/SPDIF
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power source of modules during system suspend and resume procedure. Thus, SAI needs to save all the values of registers before the system suspend and restore them after the system resume.
Signed-off-by: Zidan Wang zidan.wang@freescale.com --- sound/soc/fsl/fsl_sai.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 5c73bea..62187e4 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -637,6 +637,8 @@ static bool fsl_sai_readable_reg(struct device *dev, unsigned int reg) static bool fsl_sai_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { + case FSL_SAI_TCSR: + case FSL_SAI_RCSR: case FSL_SAI_TFR: case FSL_SAI_RFR: case FSL_SAI_TDR: @@ -681,6 +683,7 @@ static const struct regmap_config fsl_sai_regmap_config = { .readable_reg = fsl_sai_readable_reg, .volatile_reg = fsl_sai_volatile_reg, .writeable_reg = fsl_sai_writeable_reg, + .cache_type = REGCACHE_RBTREE, };
static int fsl_sai_probe(struct platform_device *pdev) @@ -802,10 +805,40 @@ static const struct of_device_id fsl_sai_ids[] = { { /* sentinel */ } };
+#if CONFIG_PM_SLEEP +static int fsl_sai_suspend(struct device *dev) +{ + struct fsl_sai *sai = dev_get_drvdata(dev); + + regcache_cache_only(sai->regmap, true); + regcache_mark_dirty(sai->regmap); + + return 0; +} + +static int fsl_sai_resume(struct device *dev) +{ + struct fsl_sai *sai = dev_get_drvdata(dev); + + regcache_cache_only(sai->regmap, false); + regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR); + regmap_write(sai->regmap, FSL_SAI_RCSR, FSL_SAI_CSR_SR); + msleep(1); + regmap_write(sai->regmap, FSL_SAI_TCSR, 0); + regmap_write(sai->regmap, FSL_SAI_RCSR, 0); + return regcache_sync(sai->regmap); +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops fsl_sai_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fsl_sai_suspend, fsl_sai_resume) +}; + static struct platform_driver fsl_sai_driver = { .probe = fsl_sai_probe, .driver = { .name = "fsl-sai", + .pm = &fsl_sai_pm_ops, .of_match_table = fsl_sai_ids, }, };
On Mon, Jul 6, 2015 at 6:50 AM, Zidan Wang zidan.wang@freescale.com wrote:
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power source of modules during system suspend and resume procedure. Thus, SAI needs to save
You meant ESAI, not SAI.
participants (2)
-
Fabio Estevam
-
Zidan Wang