On AMD/ATI controllers, the HD-audio controller driver allows a bus reset upon the error recovery, and its procedure includes the cancellation of pending jack polling work as found in snd_hda_bus_codec_reset(). This works usually fine, but it becomes a problem when the reset happens from the jack poll work itself; then calling cancel_work_sync() from the work being processed tries to wait the finish endlessly.

As a workaround, this patch adds the check of current_work() and applies the cancel_work_sync() only when it's not from the jackpoll_work.

This doesn't fix the root cause of the reported error below, but at least, it eases the unexpected stall of the whole system.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937 Cc: stable@vger.kernel.org Cc: Lukas Wunner lukas@wunner.de Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/hda/hda_codec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 0a5085537034..26d348b47867 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3935,7 +3935,8 @@ void snd_hda_bus_reset_codecs(struct hda_bus *bus)

list_for_each_codec(codec, bus) { /* FIXME: maybe a better way needed for forced reset */ - cancel_delayed_work_sync(&codec->jackpoll_work); + if (current_work() != &codec->jackpoll_work.work) + cancel_delayed_work_sync(&codec->jackpoll_work); #ifdef CONFIG_PM if (hda_codec_is_power_on(codec)) { hda_call_codec_suspend(codec);