Convert the NXP SPDIF binding to DT schema format using json-schema.

Signed-off-by: Anson Huang Anson.Huang@nxp.com Reviewed-by: Rob Herring robh@kernel.org --- changes since V1: - add "additionalProperties: false". --- .../devicetree/bindings/sound/fsl,spdif.txt | 68 ------------- .../devicetree/bindings/sound/fsl,spdif.yaml | 110 +++++++++++++++++++++ 2 files changed, 110 insertions(+), 68 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.yaml

diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt deleted file mode 100644 index e1365b0..0000000 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ /dev/null @@ -1,68 +0,0 @@ -Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller - -The Freescale S/PDIF audio block is a stereo transceiver that allows the -processor to receive and transmit digital audio via an coaxial cable or -a fibre cable. - -Required properties: - - - compatible : Compatible list, should contain one of the following - compatibles: - "fsl,imx35-spdif", - "fsl,vf610-spdif", - "fsl,imx6sx-spdif", - - - reg : Offset and length of the register set for the device. - - - interrupts : Contains the spdif interrupt. - - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Two dmas have to be defined, "tx" and "rx". - - - clocks : Contains an entry for each entry in clock-names. - - - clock-names : Includes the following entries: - "core" The core clock of spdif controller. - "rxtx<0-7>" Clock source list for tx and rx clock. - This clock list should be identical to the source - list connecting to the spdif clock mux in "SPDIF - Transceiver Clock Diagram" of SoC reference manual. - It can also be referred to TxClk_Source bit of - register SPDIF_STC. - "spba" The spba clock is required when SPDIF is placed as a - bus slave of the Shared Peripheral Bus and when two - or more bus masters (CPU, DMA or DSP) try to access - it. This property is optional depending on the SoC - design. - -Optional properties: - - - big-endian : If this property is absent, the native endian mode - will be in use as default, or the big endian mode - will be in use for all the device registers. - -Example: - -spdif: spdif@2004000 { - compatible = "fsl,imx35-spdif"; - reg = <0x02004000 0x4000>; - interrupts = <0 52 0x04>; - dmas = <&sdma 14 18 0>, - <&sdma 15 18 0>; - dma-names = "rx", "tx"; - - clocks = <&clks 197>, <&clks 3>, - <&clks 197>, <&clks 107>, - <&clks 0>, <&clks 118>, - <&clks 62>, <&clks 139>, - <&clks 0>; - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7"; - - big-endian; -}; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml new file mode 100644 index 0000000..2ac671f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller + +maintainers: + - Shengjiu Wang shengjiu.wang@nxp.com + +description: | + The Freescale S/PDIF audio block is a stereo transceiver that allows the + processor to receive and transmit digital audio via an coaxial cable or + a fibre cable. + +properties: + compatible: + enum: + - fsl,imx35-spdif + - fsl,vf610-spdif + - fsl,imx6sx-spdif + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + + clocks: + items: + - description: The core clock of spdif controller. + - description: Clock for tx0 and rx0. + - description: Clock for tx1 and rx1. + - description: Clock for tx2 and rx2. + - description: Clock for tx3 and rx3. + - description: Clock for tx4 and rx4. + - description: Clock for tx5 and rx5. + - description: Clock for tx6 and rx6. + - description: Clock for tx7 and rx7. + - description: The spba clock is required when SPDIF is placed as a bus + slave of the Shared Peripheral Bus and when two or more bus masters + (CPU, DMA or DSP) try to access it. This property is optional depending + on the SoC design. + minItems: 9 + + clock-names: + items: + - const: core + - const: rxtx0 + - const: rxtx1 + - const: rxtx2 + - const: rxtx3 + - const: rxtx4 + - const: rxtx5 + - const: rxtx6 + - const: rxtx7 + - const: spba + minItems: 9 + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: | + If this property is absent, the native endian mode will be in use + as default, or the big endian mode will be in use for all the device + registers. Set this flag for HCDs with big endian descriptors and big + endian registers. + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spdif@2004000 { + compatible = "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks 197>, <&clks 3>, + <&clks 197>, <&clks 107>, + <&clks 0>, <&clks 118>, + <&clks 62>, <&clks 139>, + <&clks 0>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7"; + big-endian; + };