Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree binding documentation to json-schema.

Signed-off-by: David Heidelberg david@ixit.cz --- .../devicetree/bindings/sound/wlf,wm8903.yaml | 116 ++++++++++++++++++ .../devicetree/bindings/sound/wm8903.txt | 82 ------------- 2 files changed, 116 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8903.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8903.txt

diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml new file mode 100644 index 000000000000..afdcf9002b60 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: WM8903 audio codec + +description: | + This device supports I2C only. + Pins on the device (for linking into audio routes): + * IN1L + * IN1R + * IN2L + * IN2R + * IN3L + * IN3R + * DMICDAT + * HPOUTL + * HPOUTR + * LINEOUTL + * LINEOUTR + * LOP + * LON + * ROP + * RON + * MICBIAS + +maintainers: + - Mark Brown broonie@opensource.wolfsonmicro.com + +properties: + compatible: + const: wlf,wm8903 + + reg: + maxItems: 1 + + gpio-controller: true + '#gpio-cells': + const: 2 + + interrupts: + maxItems: 1 + + micdet-cfg: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: Default register value for R6 (Mic Bias). + + micdet-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 100 + description: The debounce delay for microphone detection in mS. + + gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + minItems: 5 + maxItems: 5 + A list of GPIO configuration register values. + If absent, no configuration of these registers is performed. + If any entry has the value 0xffffffff, that GPIO's + configuration will not be modified. + + AVDD-supply: + description: Analog power supply regulator on the AVDD pin. + + CPVDD-supply: + description: Charge pump supply regulator on the CPVDD pin. + + DBVDD-supply: + description: Digital buffer supply regulator for the DBVDD pin. + + DCVDD-supply: + description: Digital core supply regulator for the DCVDD pin. + + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + wm8903: codec@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupts = <347>; + + AVDD-supply = <&fooreg_a>; + CPVDD-supply = <&fooreg_b>; + DBVDD-supply = <&fooreg_c>; + DCVDD-supply = <&fooreg_d>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < + 0x0600 /* DMIC_LR, output */ + 0x0680 /* DMIC_DAT, input */ + 0x0000 /* GPIO, output, low */ + 0x0200 /* Interrupt, output */ + 0x01a0 /* BCLK, input, active high */ + >; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt deleted file mode 100644 index 6371c2434afe..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8903.txt +++ /dev/null @@ -1,82 +0,0 @@ -WM8903 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "wlf,wm8903" - - - reg : the I2C address of the device. - - - gpio-controller : Indicates this device is a GPIO controller. - - - #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - -Optional properties: - - - interrupts : The interrupt line the codec is connected to. - - - micdet-cfg : Default register value for R6 (Mic Bias). If absent, the - default is 0. - - - micdet-delay : The debounce delay for microphone detection in mS. If - absent, the default is 100. - - - gpio-cfg : A list of GPIO configuration register values. The list must - be 5 entries long. If absent, no configuration of these registers is - performed. If any entry has the value 0xffffffff, that GPIO's - configuration will not be modified. - - - AVDD-supply : Analog power supply regulator on the AVDD pin. - - - CPVDD-supply : Charge pump supply regulator on the CPVDD pin. - - - DBVDD-supply : Digital buffer supply regulator for the DBVDD pin. - - - DCVDD-supply : Digital core supply regulator for the DCVDD pin. - -Pins on the device (for linking into audio routes): - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * DMICDAT - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * LOP - * LON - * ROP - * RON - * MICBIAS - -Example: - -wm8903: codec@1a { - compatible = "wlf,wm8903"; - reg = <0x1a>; - interrupts = < 347 >; - - AVDD-supply = <&fooreg_a>; - CPVDD-supply = <&fooreg_b>; - DBVDD-supply = <&fooreg_c>; - DCVDC-supply = <&fooreg_d>; - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = < - 0x0600 /* DMIC_LR, output */ - 0x0680 /* DMIC_DAT, input */ - 0x0000 /* GPIO, output, low */ - 0x0200 /* Interrupt, output */ - 0x01a0 /* BCLK, input, active high */ - >; -};