Convert the bindings for McASP controllers for TI SoCs from txt to YAML schema.

Adds additional properties 'clocks', 'clock-names', 'power-domains', '#sound-dai-cells' and 'port' which were missing from the txt file. Removes properties 'sram-size-playback' and 'sram-size-capture' since they are not used. Adds 'dmas' and 'dma-names' in the example which were missing from the txt file. Changes 'interrupts' and 'interrupt-names' from optional to required properties. Changes 'op-modes', 'serial-dir' to optional properties as they are not needed if the McASP is used only as GPIO. Changes 'tdm-slots' to required property only for I2S operation mode.

Adds the yaml file in the 'MAINTAINERS' under the heading 'TEXAS INSTRUMENTS ASoC DRIVERS'

Signed-off-by: Jayesh Choudhary j-choudhary@ti.com Reviewed-by: Rob Herring robh@kernel.org Acked-by: Peter Ujfalusi peter.ujfalusi@gmail.com --- Changelog: v6: - adds 'reviewed-by' and 'acked-by' from v5 patch

v5: - changes the commit message - changes description for 'reg', 'op-mode', 'tx-num-evt', 'rx-num-evt' and 'interrupts' - adds minimum and maximum for 'tdm-slots' - removes default from 'serial-dir' - removes maxItems from 'tdm-slots', 'tx-num-evt', 'rx-num-evt' and 'auxclk-fs-ratio' as they are of type uint32 - adds 'tdm-slots' as conditionally required property for I2S mode of operation

v4: - changes the commit message - adds type and description to relevant properties - changes maxItems for 'serial-dir' - removes properties 'sram-size-playback' and 'sram-size-capture' as they are not used - removes 'function-gpios' - removes 'num-serializer' - marks 'tdm-slots', 'op-mode' and 'serial-dir' as optional properties - adds the yaml file in MAINTAINERS

v3: - remove maxItems from 'clock-names'

v2: - changes the commit message - modifies the properties 'clocks', 'clock-names', 'dma-names', 'dmas', 'interrupts' and 'interrupt-names' according to the arm SOCs - adds 'ports' and 'num-serializer' as node properties

.../bindings/sound/davinci-mcasp-audio.txt | 86 -------- .../bindings/sound/davinci-mcasp-audio.yaml | 201 ++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 202 insertions(+), 86 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml

diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt deleted file mode 100644 index bd863bd69501..000000000000 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ /dev/null @@ -1,86 +0,0 @@ -Texas Instruments McASP controller - -Required properties: -- compatible : - "ti,dm646x-mcasp-audio" : for DM646x platforms - "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms - "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx) - "ti,dra7-mcasp-audio" : for DRA7xx platforms - "ti,omap4-mcasp-audio" : for OMAP4 - -- reg : Should contain reg specifiers for the entries in the reg-names property. -- reg-names : Should contain: - * "mpu" for the main registers (required). For compatibility with - existing software, it is recommended this is the first entry. - * "dat" for separate data port register access (optional). -- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF, - IEC60958-1, and AES-3 formats. -- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted - or received over one serializer. -- serial-dir : A list of serializer configuration. Each entry is a number - indication for serializer pin direction. - (0 - INACTIVE, 1 - TX, 2 - RX) -- dmas: two element list of DMA controller phandles and DMA request line - ordered pairs. -- dma-names: identifier string for each DMA request line in the dmas property. - These strings correspond 1:1 with the ordered pairs in dmas. The dma - identifiers must be "rx" and "tx". - -Optional properties: - -- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0 -- tx-num-evt : FIFO levels. -- rx-num-evt : FIFO levels. -- dismod : Specify the drive on TX pin during inactive slots - 0 : 3-state - 2 : logic low - 3 : logic high - Defaults to 'logic low' when the property is not present -- sram-size-playback : size of sram to be allocated during playback -- sram-size-capture : size of sram to be allocated during capture -- interrupts : Interrupt numbers for McASP -- interrupt-names : Known interrupt names are "tx" and "rx" -- pinctrl-0: Should specify pin control group used for this controller. -- pinctrl-names: Should contain only one value - "default", for more details - please refer to pinctrl-bindings.txt -- fck_parent : Should contain a valid clock name which will be used as parent - for the McASP fck -- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK - and FS rate if applicable: - AUCLK rate = auxclk-fs-ratio * FS rate - -Optional GPIO support: -If any McASP pin need to be used as GPIO then the McASP node must have: -... - gpio-controller - #gpio-cells = <2>; -... - -When requesting a GPIO, the first parameter is the PIN index in McASP_P* -registers. -For example to request the AXR2 pin of mcasp8: -function-gpios = <&mcasp8 2 0>; - -Or to request the ACLKR pin of mcasp8: -function-gpios = <&mcasp8 29 0>; - -For generic gpio information, please refer to bindings/gpio/gpio.txt - -Example: - -mcasp0: mcasp0@1d00000 { - compatible = "ti,da830-mcasp-audio"; - reg = <0x100000 0x3000>; - reg-names "mpu"; - interrupts = <82>, <83>; - interrupt-names = "tx", "rx"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - serial-dir = < - 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 0 0 - 0 0 0 1 - 2 0 0 0 >; - tx-num-evt = <1>; - rx-num-evt = <1>; -}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml new file mode 100644 index 000000000000..f46c66bc6b2d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: McASP Controller for TI SoCs + +maintainers: + - Jayesh Choudhary j-choudhary@ti.com + +properties: + compatible: + enum: + - ti,dm646x-mcasp-audio + - ti,da830-mcasp-audio + - ti,am33xx-mcasp-audio + - ti,dra7-mcasp-audio + - ti,omap4-mcasp-audio + + reg: + minItems: 1 + items: + - description: CFG registers + - description: data registers + + reg-names: + minItems: 1 + items: + - const: mpu + - const: dat + + op-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: 0 - I2S or 1 - DIT operation mode + enum: + - 0 + - 1 + + tdm-slots: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + number of channels over one serializer + the property is ignored in DIT mode + minimum: 2 + maximum: 32 + + serial-dir: + description: + A list of serializer configuration + Entry is indication for serializer pin direction + 0 - Inactive, 1 - TX, 2 - RX + All AXR pins should be present in the array even if inactive + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 25 + items: + minimum: 0 + maximum: 2 + + dmas: + minItems: 1 + items: + - description: transmission DMA channel + - description: reception DMA channel + + dma-names: + minItems: 1 + items: + - const: tx + - const: rx + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + description: Name of hwmod associated with McASP + maxItems: 1 + deprecated: true + + tx-num-evt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + configures WFIFO threshold + 0 disables the FIFO use + if property is missing, then also FIFO use is disabled + + rx-num-evt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + configures RFIFO threshold + 0 disables the FIFO use + if property is missing, then also FIFO use is disabled + + dismod: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + specify the drive on TX pin during inactive time slots + 0 - 3-state, 2 - logic low, 3 - logic high + enum: + - 0 + - 2 + - 3 + default: 2 + + interrupts: + anyOf: + - minItems: 1 + items: + - description: TX interrupt + - description: RX interrupt + - items: + - description: common/combined interrupt + + interrupt-names: + oneOf: + - minItems: 1 + items: + - const: tx + - const: rx + - const: common + + fck_parent: + $ref: /schemas/types.yaml#/definitions/string + description: parent clock name for McASP fck + maxItems: 1 + + auxclk-fs-ratio: + $ref: /schemas/types.yaml#/definitions/uint32 + description: ratio of AUCLK and FS rate if applicable + + gpio-controller: true + + "#gpio-cells": + const: 2 + + clocks: + minItems: 1 + items: + - description: functional clock + - description: module specific optional ahclkx clock + - description: module specific optional ahclkr clock + + clock-names: + minItems: 1 + items: + - const: fck + - const: ahclkx + - const: ahclkr + + power-domains: + description: phandle to the corresponding power-domain + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + port: + description: connection for when McASP is used via graph card + type: object + +required: + - compatible + - reg + - reg-names + - dmas + - dma-names + - interrupts + - interrupt-names + +allOf: + - if: + properties: + opmode: + enum: + - 0 + + then: + required: + - tdm-slots + +additionalProperties: false + +examples: + - | + mcasp0: mcasp0@1d00000 { + compatible = "ti,da830-mcasp-audio"; + reg = <0x100000 0x3000>; + reg-names = "mpu"; + interrupts = <82>, <83>; + interrupt-names = "tx", "rx"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + serial-dir = < + 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 >; + tx-num-evt = <1>; + rx-num-evt = <1>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 35ca7a4a65d8..d8f99c617ad5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19157,6 +19157,7 @@ TEXAS INSTRUMENTS ASoC DRIVERS M: Peter Ujfalusi peter.ujfalusi@gmail.com L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained +F: Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml F: sound/soc/ti/

TEXAS INSTRUMENTS' DAC7612 DAC DRIVER