[alsa-devel] [PATCH 1/4] ASoC: ssm2602: Split SPI and I2C code into different modules
There are a few known (minor) problems with having the support code for both I2C and SPI in the same module: * We need to be extra careful to make sure to not build the driver into the kernel if one of the subsystems is build as a module (Currently only SPI can be build as a module). * The module init path error handling is rather ugly. E.g. what should be done if either the SPI or the I2C driver fails to register? Most drivers that implement SPI and I2C in the same module currently fallback to undefined behavior in that case. Splitting the the driver into two modules, one for each bus allows the registration of the other bus driver to continue without problems if one of them fails.
This patch splits the AD193X driver into 3 modules. One core module that implements the device logic, but is independent of the bus method used. And one module for SPI and I2C each that registers the drivers and sets up the regmap struct for the bus.
While we are at it also cleanup the include section of the ssm2602 driver and remove unneeded includes.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/blackfin/Kconfig | 3 +- sound/soc/codecs/Kconfig | 11 ++- sound/soc/codecs/Makefile | 4 ++ sound/soc/codecs/ssm2602-i2c.c | 57 +++++++++++++++ sound/soc/codecs/ssm2602-spi.c | 41 +++++++++++ sound/soc/codecs/ssm2602.c | 158 ++++++----------------------------------- sound/soc/codecs/ssm2602.h | 14 ++++ 7 files changed, 148 insertions(+), 140 deletions(-) create mode 100644 sound/soc/codecs/ssm2602-i2c.c create mode 100644 sound/soc/codecs/ssm2602-spi.c
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig index 4544d8e..90262b9 100644 --- a/sound/soc/blackfin/Kconfig +++ b/sound/soc/blackfin/Kconfig @@ -14,7 +14,8 @@ config SND_BF5XX_SOC_SSM2602 depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI select SND_BF5XX_SOC_I2S if !BF60x select SND_BF6XX_SOC_I2S if BF60x - select SND_SOC_SSM2602 + select SND_SOC_SSM2602_SPI if SPI_MASTER + select SND_SOC_SSM2602_I2C if I2C help Say Y if you want to add support for the Analog Devices SSM2602 Audio Codec Add-On Card. diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index cc56201..0de36ae 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -70,7 +70,8 @@ config SND_SOC_ALL_CODECS select SND_SOC_SN95031 if INTEL_SCU_IPC select SND_SOC_SPDIF select SND_SOC_SSM2518 if I2C - select SND_SOC_SSM2602 if SND_SOC_I2C_AND_SPI + select SND_SOC_SSM2602_SPI if SPI_MASTER + select SND_SOC_SSM2602_I2C if I2C select SND_SOC_STA32X if I2C select SND_SOC_STA529 if I2C select SND_SOC_STAC9766 if SND_SOC_AC97_BUS @@ -361,6 +362,14 @@ config SND_SOC_SSM2518 config SND_SOC_SSM2602 tristate
+config SND_SOC_SSM2602_SPI + select SND_SOC_SSM2602 + tristate + +config SND_SOC_SSM2602_I2C + select SND_SOC_SSM2602 + tristate + config SND_SOC_STA32X tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index d3b536f..55d4973 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -59,6 +59,8 @@ snd-soc-spdif-tx-objs := spdif_transmitter.o snd-soc-spdif-rx-objs := spdif_receiver.o snd-soc-ssm2518-objs := ssm2518.o snd-soc-ssm2602-objs := ssm2602.o +snd-soc-ssm2602-spi-objs := ssm2602-spi.o +snd-soc-ssm2602-i2c-objs := ssm2602-i2c.o snd-soc-sta32x-objs := sta32x.o snd-soc-sta529-objs := sta529.o snd-soc-stac9766-objs := stac9766.o @@ -190,6 +192,8 @@ obj-$(CONFIG_SND_SOC_SN95031) +=snd-soc-sn95031.o obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o obj-$(CONFIG_SND_SOC_SSM2518) += snd-soc-ssm2518.o obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o +obj-$(CONFIG_SND_SOC_SSM2602_SPI) += snd-soc-ssm2602-spi.o +obj-$(CONFIG_SND_SOC_SSM2602_I2C) += snd-soc-ssm2602-i2c.o obj-$(CONFIG_SND_SOC_STA32X) += snd-soc-sta32x.o obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o diff --git a/sound/soc/codecs/ssm2602-i2c.c b/sound/soc/codecs/ssm2602-i2c.c new file mode 100644 index 0000000..abd63d5 --- /dev/null +++ b/sound/soc/codecs/ssm2602-i2c.c @@ -0,0 +1,57 @@ +/* + * SSM2602/SSM2603/SSM2604 I2C audio driver + * + * Copyright 2014 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> + +#include <sound/soc.h> + +#include "ssm2602.h" + +/* + * ssm2602 2 wire address is determined by GPIO5 + * state during powerup. + * low = 0x1a + * high = 0x1b + */ +static int ssm2602_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return ssm2602_probe(&client->dev, id->driver_data, + devm_regmap_init_i2c(client, &ssm2602_regmap_config)); +} + +static int ssm2602_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static const struct i2c_device_id ssm2602_i2c_id[] = { + { "ssm2602", SSM2602 }, + { "ssm2603", SSM2602 }, + { "ssm2604", SSM2604 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ssm2602_i2c_id); + +static struct i2c_driver ssm2602_i2c_driver = { + .driver = { + .name = "ssm2602", + .owner = THIS_MODULE, + }, + .probe = ssm2602_i2c_probe, + .remove = ssm2602_i2c_remove, + .id_table = ssm2602_i2c_id, +}; +module_i2c_driver(ssm2602_i2c_driver); + +MODULE_DESCRIPTION("ASoC SSM2602/SSM2603/SSM2604 I2C driver"); +MODULE_AUTHOR("Cliff Cai"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ssm2602-spi.c b/sound/soc/codecs/ssm2602-spi.c new file mode 100644 index 0000000..2bf55e2 --- /dev/null +++ b/sound/soc/codecs/ssm2602-spi.c @@ -0,0 +1,41 @@ +/* + * SSM2602 SPI audio driver + * + * Copyright 2014 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/regmap.h> + +#include <sound/soc.h> + +#include "ssm2602.h" + +static int ssm2602_spi_probe(struct spi_device *spi) +{ + return ssm2602_probe(&spi->dev, SSM2602, + devm_regmap_init_spi(spi, &ssm2602_regmap_config)); +} + +static int ssm2602_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + return 0; +} + +static struct spi_driver ssm2602_spi_driver = { + .driver = { + .name = "ssm2602", + .owner = THIS_MODULE, + }, + .probe = ssm2602_spi_probe, + .remove = ssm2602_spi_remove, +}; +module_spi_driver(ssm2602_spi_driver); + +MODULE_DESCRIPTION("ASoC SSM2602 SPI driver"); +MODULE_AUTHOR("Cliff Cai"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index f444d58..49d28ea 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -27,28 +27,16 @@ */
#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pm.h> -#include <linux/i2c.h> -#include <linux/spi/spi.h> #include <linux/regmap.h> #include <linux/slab.h> -#include <sound/core.h> + #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> -#include <sound/initval.h> #include <sound/tlv.h>
#include "ssm2602.h"
-enum ssm2602_type { - SSM2602, - SSM2604, -}; - /* codec private data */ struct ssm2602_priv { unsigned int sysclk; @@ -529,7 +517,7 @@ static int ssm2602_resume(struct snd_soc_codec *codec) return 0; }
-static int ssm2602_probe(struct snd_soc_codec *codec) +static int ssm2602_codec_probe(struct snd_soc_codec *codec) { struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec); struct snd_soc_dapm_context *dapm = &codec->dapm; @@ -554,7 +542,7 @@ static int ssm2602_probe(struct snd_soc_codec *codec) ARRAY_SIZE(ssm2602_routes)); }
-static int ssm2604_probe(struct snd_soc_codec *codec) +static int ssm2604_codec_probe(struct snd_soc_codec *codec) { struct snd_soc_dapm_context *dapm = &codec->dapm; int ret; @@ -568,7 +556,7 @@ static int ssm2604_probe(struct snd_soc_codec *codec) ARRAY_SIZE(ssm2604_routes)); }
-static int ssm260x_probe(struct snd_soc_codec *codec) +static int ssm260x_codec_probe(struct snd_soc_codec *codec) { struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec); int ret; @@ -597,10 +585,10 @@ static int ssm260x_probe(struct snd_soc_codec *codec)
switch (ssm2602->type) { case SSM2602: - ret = ssm2602_probe(codec); + ret = ssm2602_codec_probe(codec); break; case SSM2604: - ret = ssm2604_probe(codec); + ret = ssm2604_codec_probe(codec); break; }
@@ -620,7 +608,7 @@ static int ssm2602_remove(struct snd_soc_codec *codec) }
static struct snd_soc_codec_driver soc_codec_dev_ssm2602 = { - .probe = ssm260x_probe, + .probe = ssm260x_codec_probe, .remove = ssm2602_remove, .suspend = ssm2602_suspend, .resume = ssm2602_resume, @@ -639,7 +627,7 @@ static bool ssm2602_register_volatile(struct device *dev, unsigned int reg) return reg == SSM2602_RESET; }
-static const struct regmap_config ssm2602_regmap_config = { +const struct regmap_config ssm2602_regmap_config = { .val_bits = 9, .reg_bits = 7,
@@ -650,134 +638,28 @@ static const struct regmap_config ssm2602_regmap_config = { .reg_defaults_raw = ssm2602_reg, .num_reg_defaults_raw = ARRAY_SIZE(ssm2602_reg), }; +EXPORT_SYMBOL_GPL(ssm2602_regmap_config);
-#if defined(CONFIG_SPI_MASTER) -static int ssm2602_spi_probe(struct spi_device *spi) +int ssm2602_probe(struct device *dev, enum ssm2602_type type, + struct regmap *regmap) { struct ssm2602_priv *ssm2602; - int ret; - - ssm2602 = devm_kzalloc(&spi->dev, sizeof(struct ssm2602_priv), - GFP_KERNEL); - if (ssm2602 == NULL) - return -ENOMEM; - - spi_set_drvdata(spi, ssm2602); - ssm2602->type = SSM2602; - - ssm2602->regmap = devm_regmap_init_spi(spi, &ssm2602_regmap_config); - if (IS_ERR(ssm2602->regmap)) - return PTR_ERR(ssm2602->regmap); - - ret = snd_soc_register_codec(&spi->dev, - &soc_codec_dev_ssm2602, &ssm2602_dai, 1); - return ret; -}
-static int ssm2602_spi_remove(struct spi_device *spi) -{ - snd_soc_unregister_codec(&spi->dev); - return 0; -} - -static struct spi_driver ssm2602_spi_driver = { - .driver = { - .name = "ssm2602", - .owner = THIS_MODULE, - }, - .probe = ssm2602_spi_probe, - .remove = ssm2602_spi_remove, -}; -#endif - -#if IS_ENABLED(CONFIG_I2C) -/* - * ssm2602 2 wire address is determined by GPIO5 - * state during powerup. - * low = 0x1a - * high = 0x1b - */ -static int ssm2602_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct ssm2602_priv *ssm2602; - int ret; + if (IS_ERR(regmap)) + return PTR_ERR(regmap);
- ssm2602 = devm_kzalloc(&i2c->dev, sizeof(struct ssm2602_priv), - GFP_KERNEL); + ssm2602 = devm_kzalloc(dev, sizeof(*ssm2602), GFP_KERNEL); if (ssm2602 == NULL) return -ENOMEM;
- i2c_set_clientdata(i2c, ssm2602); - ssm2602->type = id->driver_data; - - ssm2602->regmap = devm_regmap_init_i2c(i2c, &ssm2602_regmap_config); - if (IS_ERR(ssm2602->regmap)) - return PTR_ERR(ssm2602->regmap); - - ret = snd_soc_register_codec(&i2c->dev, - &soc_codec_dev_ssm2602, &ssm2602_dai, 1); - return ret; -} - -static int ssm2602_i2c_remove(struct i2c_client *client) -{ - snd_soc_unregister_codec(&client->dev); - return 0; -} - -static const struct i2c_device_id ssm2602_i2c_id[] = { - { "ssm2602", SSM2602 }, - { "ssm2603", SSM2602 }, - { "ssm2604", SSM2604 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ssm2602_i2c_id); - -/* corgi i2c codec control layer */ -static struct i2c_driver ssm2602_i2c_driver = { - .driver = { - .name = "ssm2602", - .owner = THIS_MODULE, - }, - .probe = ssm2602_i2c_probe, - .remove = ssm2602_i2c_remove, - .id_table = ssm2602_i2c_id, -}; -#endif - - -static int __init ssm2602_modinit(void) -{ - int ret = 0; - -#if defined(CONFIG_SPI_MASTER) - ret = spi_register_driver(&ssm2602_spi_driver); - if (ret) - return ret; -#endif - -#if IS_ENABLED(CONFIG_I2C) - ret = i2c_add_driver(&ssm2602_i2c_driver); - if (ret) - return ret; -#endif - - return ret; -} -module_init(ssm2602_modinit); - -static void __exit ssm2602_exit(void) -{ -#if defined(CONFIG_SPI_MASTER) - spi_unregister_driver(&ssm2602_spi_driver); -#endif + dev_set_drvdata(dev, ssm2602); + ssm2602->type = SSM2602; + ssm2602->regmap = regmap;
-#if IS_ENABLED(CONFIG_I2C) - i2c_del_driver(&ssm2602_i2c_driver); -#endif + return snd_soc_register_codec(dev, &soc_codec_dev_ssm2602, + &ssm2602_dai, 1); } -module_exit(ssm2602_exit); +EXPORT_SYMBOL_GPL(ssm2602_probe);
MODULE_DESCRIPTION("ASoC SSM2602/SSM2603/SSM2604 driver"); MODULE_AUTHOR("Cliff Cai"); diff --git a/sound/soc/codecs/ssm2602.h b/sound/soc/codecs/ssm2602.h index fbd07d7..7475388 100644 --- a/sound/soc/codecs/ssm2602.h +++ b/sound/soc/codecs/ssm2602.h @@ -28,6 +28,20 @@ #ifndef _SSM2602_H #define _SSM2602_H
+#include <linux/regmap.h> + +struct device; + +enum ssm2602_type { + SSM2602, + SSM2604, +}; + +extern const struct regmap_config ssm2602_regmap_config; + +int ssm2602_probe(struct device *dev, enum ssm2602_type type, + struct regmap *regmap); + /* SSM2602 Codec Register definitions */
#define SSM2602_LINVOL 0x00
There are a few known (minor) problems with having the support code for both I2C and SPI in the same module: * We need to be extra careful to make sure to not build the driver into the kernel if one of the subsystems is build as a module (Currently only SPI can be build as a module). * The module init path error handling is rather ugly. E.g. what should be done if either the SPI or the I2C driver fails to register? Most drivers that implement SPI and I2C in the same module currently fallback to undefined behavior in that case. Splitting the the driver into two modules, one for each bus, allows the registration of the other bus driver to continue without problems if one of them fails.
This patch splits the AD193X driver into 3 modules. One core module that implements the device logic, but is independent of the bus method used. And one module for SPI and I2C each that registers the drivers and sets up the regmap struct for the bus.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/blackfin/Kconfig | 3 +- sound/soc/codecs/Kconfig | 11 +++- sound/soc/codecs/Makefile | 4 ++ sound/soc/codecs/ad193x-i2c.c | 54 ++++++++++++++++ sound/soc/codecs/ad193x-spi.c | 48 +++++++++++++++ sound/soc/codecs/ad193x.c | 140 +++++------------------------------------- sound/soc/codecs/ad193x.h | 7 +++ 7 files changed, 140 insertions(+), 127 deletions(-) create mode 100644 sound/soc/codecs/ad193x-i2c.c create mode 100644 sound/soc/codecs/ad193x-spi.c
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig index 90262b9..89f7748 100644 --- a/sound/soc/blackfin/Kconfig +++ b/sound/soc/blackfin/Kconfig @@ -68,7 +68,8 @@ config SND_BF5XX_SOC_AD193X tristate "SoC AD193X Audio support for Blackfin" depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI select SND_BF5XX_SOC_I2S - select SND_SOC_AD193X + select SND_SOC_AD193X_I2C if I2C + select SND_SOC_AD193X_SPI if SPI_MASTER help Say Y if you want to add support for AD193X codec on Blackfin. This driver supports AD1936, AD1937, AD1938 and AD1939. diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0de36ae..a9b75c5 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -18,7 +18,8 @@ config SND_SOC_ALL_CODECS select SND_SOC_AB8500_CODEC if ABX500_CORE select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS select SND_SOC_AD1836 if SPI_MASTER - select SND_SOC_AD193X if SND_SOC_I2C_AND_SPI + select SND_SOC_AD193X_SPI if SPI_MASTER + select SND_SOC_AD193X_I2C if I2C select SND_SOC_AD1980 if SND_SOC_AC97_BUS select SND_SOC_AD73311 select SND_SOC_ADAU1373 if I2C @@ -187,6 +188,14 @@ config SND_SOC_AD1836 config SND_SOC_AD193X tristate
+config SND_SOC_AD193X_SPI + tristate + select SND_SOC_AD193X + +config SND_SOC_AD193X_I2C + tristate + select SND_SOC_AD193X + config SND_SOC_AD1980 tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 55d4973..6be463b 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -3,6 +3,8 @@ snd-soc-ab8500-codec-objs := ab8500-codec.o snd-soc-ac97-objs := ac97.o snd-soc-ad1836-objs := ad1836.o snd-soc-ad193x-objs := ad193x.o +snd-soc-ad193x-spi-objs := ad193x-spi.o +snd-soc-ad193x-i2c-objs := ad193x-i2c.o snd-soc-ad1980-objs := ad1980.o snd-soc-ad73311-objs := ad73311.o snd-soc-adau1701-objs := adau1701.o @@ -137,6 +139,8 @@ obj-$(CONFIG_SND_SOC_AB8500_CODEC) += snd-soc-ab8500-codec.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o obj-$(CONFIG_SND_SOC_AD193X) += snd-soc-ad193x.o +obj-$(CONFIG_SND_SOC_AD193X_SPI) += snd-soc-ad193x-spi.o +obj-$(CONFIG_SND_SOC_AD193X_I2C) += snd-soc-ad193x-i2c.o obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o obj-$(CONFIG_SND_SOC_ADAU1373) += snd-soc-adau1373.o diff --git a/sound/soc/codecs/ad193x-i2c.c b/sound/soc/codecs/ad193x-i2c.c new file mode 100644 index 0000000..df3a1a4 --- /dev/null +++ b/sound/soc/codecs/ad193x-i2c.c @@ -0,0 +1,54 @@ +/* + * AD1936/AD1937 audio driver + * + * Copyright 2014 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> + +#include <sound/soc.h> + +#include "ad193x.h" + +static const struct i2c_device_id ad193x_id[] = { + { "ad1936", 0 }, + { "ad1937", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad193x_id); + +static int ad193x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap_config config; + + config = ad193x_regmap_config; + config.val_bits = 8; + config.reg_bits = 8; + + return ad193x_probe(&client->dev, devm_regmap_init_i2c(client, &config)); +} + +static int ad193x_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static struct i2c_driver ad193x_i2c_driver = { + .driver = { + .name = "ad193x", + }, + .probe = ad193x_i2c_probe, + .remove = ad193x_i2c_remove, + .id_table = ad193x_id, +}; +module_i2c_driver(ad193x_i2c_driver); + +MODULE_DESCRIPTION("ASoC AD1936/AD1937 audio CODEC driver"); +MODULE_AUTHOR("Barry Song 21cnbao@gmail.com"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ad193x-spi.c b/sound/soc/codecs/ad193x-spi.c new file mode 100644 index 0000000..390cef9 --- /dev/null +++ b/sound/soc/codecs/ad193x-spi.c @@ -0,0 +1,48 @@ +/* + * AD1938/AD1939 audio driver + * + * Copyright 2014 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/regmap.h> + +#include <sound/soc.h> + +#include "ad193x.h" + +static int ad193x_spi_probe(struct spi_device *spi) +{ + struct regmap_config config; + + config = ad193x_regmap_config; + config.val_bits = 8; + config.reg_bits = 16; + config.read_flag_mask = 0x09; + config.write_flag_mask = 0x08; + + return ad193x_probe(&spi->dev, devm_regmap_init_spi(spi, &config)); +} + +static int ad193x_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + return 0; +} + +static struct spi_driver ad193x_spi_driver = { + .driver = { + .name = "ad193x", + .owner = THIS_MODULE, + }, + .probe = ad193x_spi_probe, + .remove = ad193x_spi_remove, +}; +module_spi_driver(ad193x_spi_driver); + +MODULE_DESCRIPTION("ASoC AD1938/AD1939 audio CODEC driver"); +MODULE_AUTHOR("Barry Song 21cnbao@gmail.com"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c index 5a42dca..f644a34 100644 --- a/sound/soc/codecs/ad193x.c +++ b/sound/soc/codecs/ad193x.c @@ -6,12 +6,10 @@ * Licensed under the GPL-2 or later. */
-#include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/device.h> -#include <linux/i2c.h> -#include <linux/spi/spi.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <sound/core.h> #include <sound/pcm.h> @@ -19,6 +17,7 @@ #include <sound/initval.h> #include <sound/soc.h> #include <sound/tlv.h> + #include "ad193x.h"
/* codec private data */ @@ -320,7 +319,7 @@ static struct snd_soc_dai_driver ad193x_dai = { .ops = &ad193x_dai_ops, };
-static int ad193x_probe(struct snd_soc_codec *codec) +static int ad193x_codec_probe(struct snd_soc_codec *codec) { struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec); int ret; @@ -352,7 +351,7 @@ static int ad193x_probe(struct snd_soc_codec *codec) }
static struct snd_soc_codec_driver soc_codec_dev_ad193x = { - .probe = ad193x_probe, + .probe = ad193x_codec_probe, .controls = ad193x_snd_controls, .num_controls = ARRAY_SIZE(ad193x_snd_controls), .dapm_widgets = ad193x_dapm_widgets, @@ -366,140 +365,31 @@ static bool adau193x_reg_volatile(struct device *dev, unsigned int reg) return false; }
-#if defined(CONFIG_SPI_MASTER) - -static const struct regmap_config ad193x_spi_regmap_config = { - .val_bits = 8, - .reg_bits = 16, - .read_flag_mask = 0x09, - .write_flag_mask = 0x08, - +const struct regmap_config ad193x_regmap_config = { .max_register = AD193X_NUM_REGS - 1, .volatile_reg = adau193x_reg_volatile, }; +EXPORT_SYMBOL_GPL(ad193x_regmap_config);
-static int ad193x_spi_probe(struct spi_device *spi) +int ad193x_probe(struct device *dev, struct regmap *regmap) { struct ad193x_priv *ad193x;
- ad193x = devm_kzalloc(&spi->dev, sizeof(struct ad193x_priv), - GFP_KERNEL); - if (ad193x == NULL) - return -ENOMEM; - - ad193x->regmap = devm_regmap_init_spi(spi, &ad193x_spi_regmap_config); - if (IS_ERR(ad193x->regmap)) - return PTR_ERR(ad193x->regmap); - - spi_set_drvdata(spi, ad193x); - - return snd_soc_register_codec(&spi->dev, &soc_codec_dev_ad193x, - &ad193x_dai, 1); -} - -static int ad193x_spi_remove(struct spi_device *spi) -{ - snd_soc_unregister_codec(&spi->dev); - return 0; -} - -static struct spi_driver ad193x_spi_driver = { - .driver = { - .name = "ad193x", - .owner = THIS_MODULE, - }, - .probe = ad193x_spi_probe, - .remove = ad193x_spi_remove, -}; -#endif - -#if IS_ENABLED(CONFIG_I2C) - -static const struct regmap_config ad193x_i2c_regmap_config = { - .val_bits = 8, - .reg_bits = 8, - - .max_register = AD193X_NUM_REGS - 1, - .volatile_reg = adau193x_reg_volatile, -}; - -static const struct i2c_device_id ad193x_id[] = { - { "ad1936", 0 }, - { "ad1937", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ad193x_id); + if (IS_ERR(regmap)) + return PTR_ERR(regmap);
-static int ad193x_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct ad193x_priv *ad193x; - - ad193x = devm_kzalloc(&client->dev, sizeof(struct ad193x_priv), - GFP_KERNEL); + ad193x = devm_kzalloc(dev, sizeof(*ad193x), GFP_KERNEL); if (ad193x == NULL) return -ENOMEM;
- ad193x->regmap = devm_regmap_init_i2c(client, &ad193x_i2c_regmap_config); - if (IS_ERR(ad193x->regmap)) - return PTR_ERR(ad193x->regmap); - - i2c_set_clientdata(client, ad193x); - - return snd_soc_register_codec(&client->dev, &soc_codec_dev_ad193x, - &ad193x_dai, 1); -} - -static int ad193x_i2c_remove(struct i2c_client *client) -{ - snd_soc_unregister_codec(&client->dev); - return 0; -} + ad193x->regmap = regmap;
-static struct i2c_driver ad193x_i2c_driver = { - .driver = { - .name = "ad193x", - }, - .probe = ad193x_i2c_probe, - .remove = ad193x_i2c_remove, - .id_table = ad193x_id, -}; -#endif - -static int __init ad193x_modinit(void) -{ - int ret; - -#if IS_ENABLED(CONFIG_I2C) - ret = i2c_add_driver(&ad193x_i2c_driver); - if (ret != 0) { - printk(KERN_ERR "Failed to register AD193X I2C driver: %d\n", - ret); - } -#endif - -#if defined(CONFIG_SPI_MASTER) - ret = spi_register_driver(&ad193x_spi_driver); - if (ret != 0) { - printk(KERN_ERR "Failed to register AD193X SPI driver: %d\n", - ret); - } -#endif - return ret; -} -module_init(ad193x_modinit); - -static void __exit ad193x_modexit(void) -{ -#if defined(CONFIG_SPI_MASTER) - spi_unregister_driver(&ad193x_spi_driver); -#endif + dev_set_drvdata(dev, ad193x);
-#if IS_ENABLED(CONFIG_I2C) - i2c_del_driver(&ad193x_i2c_driver); -#endif + return snd_soc_register_codec(dev, &soc_codec_dev_ad193x, + &ad193x_dai, 1); } -module_exit(ad193x_modexit); +EXPORT_SYMBOL_GPL(ad193x_probe);
MODULE_DESCRIPTION("ASoC ad193x driver"); MODULE_AUTHOR("Barry Song 21cnbao@gmail.com"); diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h index 4733880..ab9a998 100644 --- a/sound/soc/codecs/ad193x.h +++ b/sound/soc/codecs/ad193x.h @@ -9,6 +9,13 @@ #ifndef __AD193X_H__ #define __AD193X_H__
+#include <linux/regmap.h> + +struct device; + +extern const struct regmap_config ad193x_regmap_config; +int ad193x_probe(struct device *dev, struct regmap *regmap); + #define AD193X_PLL_CLK_CTRL0 0x00 #define AD193X_PLL_POWERDOWN 0x01 #define AD193X_PLL_INPUT_MASK 0x6
On Mon, Feb 17, 2014 at 01:16:54PM +0100, Lars-Peter Clausen wrote:
kernel if one of the subsystems is build as a module (Currently only SPI can be build as a module).
Same issue again here. You're also going right up to the 80 column limit here and...
* The module init path error handling is rather ugly. E.g. what should be done if either the SPI or the I2C driver fails to register? Most drivers that implement SPI and I2C in the same module currently fallback to undefined behavior in that case. Splitting the the driver into two modules, one for each bus, allows the registration of the other bus driver to continue without problems if one of them fails.
...and something is messed up here, looks like tab/space confusion.
Applied with fixups to the changelog.
Use devm_kzalloc() to allocate the device state struct. Saves use from having to free it manually on the error path and in the remove callback.
Now that the adav80x_bus_probe() function is only a call to snd_soc_unregister_codec() also inline that.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/adav80x.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/sound/soc/codecs/adav80x.c b/sound/soc/codecs/adav80x.c index f78b27a..a4bd051 100644 --- a/sound/soc/codecs/adav80x.c +++ b/sound/soc/codecs/adav80x.c @@ -872,27 +872,15 @@ static int adav80x_bus_probe(struct device *dev, struct regmap *regmap) if (IS_ERR(regmap)) return PTR_ERR(regmap);
- adav80x = kzalloc(sizeof(*adav80x), GFP_KERNEL); + adav80x = devm_kzalloc(dev, sizeof(*adav80x), GFP_KERNEL); if (!adav80x) return -ENOMEM;
- dev_set_drvdata(dev, adav80x); adav80x->regmap = regmap;
- ret = snd_soc_register_codec(dev, &adav80x_codec_driver, + return snd_soc_register_codec(dev, &adav80x_codec_driver, adav80x_dais, ARRAY_SIZE(adav80x_dais)); - if (ret) - kfree(adav80x); - - return ret; -} - -static int adav80x_bus_remove(struct device *dev) -{ - snd_soc_unregister_codec(dev); - kfree(dev_get_drvdata(dev)); - return 0; }
#if defined(CONFIG_SPI_MASTER) @@ -923,7 +911,8 @@ static int adav80x_spi_probe(struct spi_device *spi)
static int adav80x_spi_remove(struct spi_device *spi) { - return adav80x_bus_remove(&spi->dev); + snd_soc_unregister_codec(dev); + return 0; }
static struct spi_driver adav80x_spi_driver = { @@ -965,7 +954,8 @@ static int adav80x_i2c_probe(struct i2c_client *client,
static int adav80x_i2c_remove(struct i2c_client *client) { - return adav80x_bus_remove(&client->dev); + snd_soc_unregister_codec(dev); + return 0; }
static struct i2c_driver adav80x_i2c_driver = {
On Mon, Feb 17, 2014 at 01:16:55PM +0100, Lars-Peter Clausen wrote:
Use devm_kzalloc() to allocate the device state struct. Saves use from having to free it manually on the error path and in the remove callback.
Now that the adav80x_bus_probe() function is only a call to snd_soc_unregister_codec() also inline that.
Applied, thanks.
There are a few known (minor) problems with having the support code for both I2C and SPI in the same module: * We need to be extra careful to make sure to not build the driver into the kernel if one of the subsystems is build as a module (Currently only SPI can be build as a module). * The module init path error handling is rather ugly. E.g. what should be done if either the SPI or the I2C driver fails to register. Most drivers that implement SPI and I2C in the same module currently fallback to undefined behavior in that case. Splitting the the driver into two modules, one for each bus, allows the registration of the other bus drive to continue without problems if one of them fails.
This patch splits the ADAV80X driver into 3 modules. One core module that implements the device logic, but is independent of the bus method used. And one module for SPI and I2C each that registers the drivers and sets up the regmap struct for the bus.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/blackfin/Kconfig | 3 +- sound/soc/codecs/Kconfig | 11 ++++- sound/soc/codecs/Makefile | 4 ++ sound/soc/codecs/adav801.c | 53 ++++++++++++++++++++ sound/soc/codecs/adav803.c | 50 +++++++++++++++++++ sound/soc/codecs/adav80x.c | 117 +++------------------------------------------ sound/soc/codecs/adav80x.h | 7 +++ 7 files changed, 133 insertions(+), 112 deletions(-) create mode 100644 sound/soc/codecs/adav801.c create mode 100644 sound/soc/codecs/adav803.c
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig index 89f7748..6347d59 100644 --- a/sound/soc/blackfin/Kconfig +++ b/sound/soc/blackfin/Kconfig @@ -47,7 +47,8 @@ config SND_SOC_BFIN_EVAL_ADAV80X tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards" depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI select SND_BF5XX_SOC_I2S - select SND_SOC_ADAV80X + select SND_SOC_ADAV801 if SPI_MASTER + select SND_SOC_ADAV803 if I2C help Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or EVAL-ADAV803 board connected to one of the Blackfin evaluation boards diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index a9b75c5..6d01f91 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -23,7 +23,8 @@ config SND_SOC_ALL_CODECS select SND_SOC_AD1980 if SND_SOC_AC97_BUS select SND_SOC_AD73311 select SND_SOC_ADAU1373 if I2C - select SND_SOC_ADAV80X if SND_SOC_I2C_AND_SPI + select SND_SOC_ADAV801 if SPI_MASTER + select SND_SOC_ADAV803 if I2C select SND_SOC_ADAU1701 if I2C select SND_SOC_ADS117X select SND_SOC_AK4104 if SPI_MASTER @@ -213,6 +214,14 @@ config SND_SOC_ADAU1373 config SND_SOC_ADAV80X tristate
+config SND_SOC_ADAV801 + tristate + select SND_SOC_ADAV80X + +config SND_SOC_ADAV803 + tristate + select SND_SOC_ADAV80X + config SND_SOC_ADS117X tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 6be463b..c33cf8a 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -10,6 +10,8 @@ snd-soc-ad73311-objs := ad73311.o snd-soc-adau1701-objs := adau1701.o snd-soc-adau1373-objs := adau1373.o snd-soc-adav80x-objs := adav80x.o +snd-soc-adav801-objs := adav801.o +snd-soc-adav803-objs := adav803.o snd-soc-ads117x-objs := ads117x.o snd-soc-ak4104-objs := ak4104.o snd-soc-ak4535-objs := ak4535.o @@ -146,6 +148,8 @@ obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o obj-$(CONFIG_SND_SOC_ADAU1373) += snd-soc-adau1373.o obj-$(CONFIG_SND_SOC_ADAU1701) += snd-soc-adau1701.o obj-$(CONFIG_SND_SOC_ADAV80X) += snd-soc-adav80x.o +obj-$(CONFIG_SND_SOC_ADAV801) += snd-soc-adav801.o +obj-$(CONFIG_SND_SOC_ADAV803) += snd-soc-adav803.o obj-$(CONFIG_SND_SOC_ADS117X) += snd-soc-ads117x.o obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o diff --git a/sound/soc/codecs/adav801.c b/sound/soc/codecs/adav801.c new file mode 100644 index 0000000..790fce3 --- /dev/null +++ b/sound/soc/codecs/adav801.c @@ -0,0 +1,53 @@ +/* + * ADAV801 audio driver + * + * Copyright 2014 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/regmap.h> + +#include <sound/soc.h> + +#include "adav80x.h" + +static const struct spi_device_id adav80x_spi_id[] = { + { "adav801", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, adav80x_spi_id); + +static int adav80x_spi_probe(struct spi_device *spi) +{ + struct regmap_config config; + + config = adav80x_regmap_config; + config.read_flag_mask = 0x01; + + return adav80x_bus_probe(&spi->dev, devm_regmap_init_spi(spi, &config)); +} + +static int adav80x_spi_remove(struct spi_device *spi) +{ + snd_soc_unregister_codec(&spi->dev); + return 0; +} + +static struct spi_driver adav80x_spi_driver = { + .driver = { + .name = "adav801", + .owner = THIS_MODULE, + }, + .probe = adav80x_spi_probe, + .remove = adav80x_spi_remove, + .id_table = adav80x_spi_id, +}; +module_spi_driver(adav80x_spi_driver); + +MODULE_DESCRIPTION("ASoC ADAV801 driver"); +MODULE_AUTHOR("Lars-Peter Clausen lars@metafoo.de"); +MODULE_AUTHOR("Yi Li yi.li@analog.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/adav803.c b/sound/soc/codecs/adav803.c new file mode 100644 index 0000000..66d9fce --- /dev/null +++ b/sound/soc/codecs/adav803.c @@ -0,0 +1,50 @@ +/* + * ADAV803 audio driver + * + * Copyright 2014 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> + +#include <sound/soc.h> + +#include "adav80x.h" + +static const struct i2c_device_id adav803_id[] = { + { "adav803", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adav803_id); + +static int adav803_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return adav80x_bus_probe(&client->dev, + devm_regmap_init_i2c(client, &adav80x_regmap_config)); +} + +static int adav803_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static struct i2c_driver adav803_driver = { + .driver = { + .name = "adav803", + .owner = THIS_MODULE, + }, + .probe = adav803_probe, + .remove = adav803_remove, + .id_table = adav803_id, +}; +module_i2c_driver(adav803_driver); + +MODULE_DESCRIPTION("ASoC ADAV803 driver"); +MODULE_AUTHOR("Lars-Peter Clausen lars@metafoo.de"); +MODULE_AUTHOR("Yi Li yi.li@analog.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/adav80x.c b/sound/soc/codecs/adav80x.c index a4bd051..09d5609 100644 --- a/sound/soc/codecs/adav80x.c +++ b/sound/soc/codecs/adav80x.c @@ -8,17 +8,15 @@ * Licensed under the GPL-2 or later. */
-#include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/spi/spi.h> +#include <linux/regmap.h> #include <linux/slab.h> -#include <sound/core.h> + #include <sound/pcm.h> #include <sound/pcm_params.h> -#include <sound/tlv.h> #include <sound/soc.h> +#include <sound/tlv.h>
#include "adav80x.h"
@@ -864,10 +862,9 @@ static struct snd_soc_codec_driver adav80x_codec_driver = { .num_dapm_routes = ARRAY_SIZE(adav80x_dapm_routes), };
-static int adav80x_bus_probe(struct device *dev, struct regmap *regmap) +int adav80x_bus_probe(struct device *dev, struct regmap *regmap) { struct adav80x *adav80x; - int ret;
if (IS_ERR(regmap)) return PTR_ERR(regmap); @@ -882,9 +879,9 @@ static int adav80x_bus_probe(struct device *dev, struct regmap *regmap) return snd_soc_register_codec(dev, &adav80x_codec_driver, adav80x_dais, ARRAY_SIZE(adav80x_dais)); } +EXPORT_SYMBOL_GPL(adav80x_bus_probe);
-#if defined(CONFIG_SPI_MASTER) -static const struct regmap_config adav80x_spi_regmap_config = { +const struct regmap_config adav80x_regmap_config = { .val_bits = 8, .pad_bits = 1, .reg_bits = 7, @@ -896,107 +893,7 @@ static const struct regmap_config adav80x_spi_regmap_config = { .reg_defaults = adav80x_reg_defaults, .num_reg_defaults = ARRAY_SIZE(adav80x_reg_defaults), }; - -static const struct spi_device_id adav80x_spi_id[] = { - { "adav801", 0 }, - { } -}; -MODULE_DEVICE_TABLE(spi, adav80x_spi_id); - -static int adav80x_spi_probe(struct spi_device *spi) -{ - return adav80x_bus_probe(&spi->dev, - devm_regmap_init_spi(spi, &adav80x_spi_regmap_config)); -} - -static int adav80x_spi_remove(struct spi_device *spi) -{ - snd_soc_unregister_codec(dev); - return 0; -} - -static struct spi_driver adav80x_spi_driver = { - .driver = { - .name = "adav801", - .owner = THIS_MODULE, - }, - .probe = adav80x_spi_probe, - .remove = adav80x_spi_remove, - .id_table = adav80x_spi_id, -}; -#endif - -#if IS_ENABLED(CONFIG_I2C) -static const struct regmap_config adav80x_i2c_regmap_config = { - .val_bits = 8, - .pad_bits = 1, - .reg_bits = 7, - - .max_register = ADAV80X_PLL_OUTE, - - .cache_type = REGCACHE_RBTREE, - .reg_defaults = adav80x_reg_defaults, - .num_reg_defaults = ARRAY_SIZE(adav80x_reg_defaults), -}; - -static const struct i2c_device_id adav80x_i2c_id[] = { - { "adav803", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, adav80x_i2c_id); - -static int adav80x_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - return adav80x_bus_probe(&client->dev, - devm_regmap_init_i2c(client, &adav80x_i2c_regmap_config)); -} - -static int adav80x_i2c_remove(struct i2c_client *client) -{ - snd_soc_unregister_codec(dev); - return 0; -} - -static struct i2c_driver adav80x_i2c_driver = { - .driver = { - .name = "adav803", - .owner = THIS_MODULE, - }, - .probe = adav80x_i2c_probe, - .remove = adav80x_i2c_remove, - .id_table = adav80x_i2c_id, -}; -#endif - -static int __init adav80x_init(void) -{ - int ret = 0; - -#if IS_ENABLED(CONFIG_I2C) - ret = i2c_add_driver(&adav80x_i2c_driver); - if (ret) - return ret; -#endif - -#if defined(CONFIG_SPI_MASTER) - ret = spi_register_driver(&adav80x_spi_driver); -#endif - - return ret; -} -module_init(adav80x_init); - -static void __exit adav80x_exit(void) -{ -#if IS_ENABLED(CONFIG_I2C) - i2c_del_driver(&adav80x_i2c_driver); -#endif -#if defined(CONFIG_SPI_MASTER) - spi_unregister_driver(&adav80x_spi_driver); -#endif -} -module_exit(adav80x_exit); +EXPORT_SYMBOL_GPL(adav80x_regmap_config);
MODULE_DESCRIPTION("ASoC ADAV80x driver"); MODULE_AUTHOR("Lars-Peter Clausen lars@metafoo.de"); diff --git a/sound/soc/codecs/adav80x.h b/sound/soc/codecs/adav80x.h index adb0fc7..8a1d7c0 100644 --- a/sound/soc/codecs/adav80x.h +++ b/sound/soc/codecs/adav80x.h @@ -9,6 +9,13 @@ #ifndef _ADAV80X_H #define _ADAV80X_H
+#include <linux/regmap.h> + +struct device; + +extern const struct regmap_config adav80x_regmap_config; +int adav80x_bus_probe(struct device *dev, struct regmap *regmap); + enum adav80x_pll_src { ADAV80X_PLL_SRC_XIN, ADAV80X_PLL_SRC_XTAL,
On Mon, Feb 17, 2014 at 01:16:56PM +0100, Lars-Peter Clausen wrote:
There are a few known (minor) problems with having the support code for both I2C and SPI in the same module:
Applied, thanks.
On Mon, Feb 17, 2014 at 01:16:53PM +0100, Lars-Peter Clausen wrote:
There are a few known (minor) problems with having the support code for both I2C and SPI in the same module: * We need to be extra careful to make sure to not build the driver into the kernel if one of the subsystems is build as a module (Currently only SPI can be build as a module).
I2C not SPI.
This patch splits the AD193X driver into 3 modules. One core module that implements the device logic, but is independent of the bus method used. And one module for SPI and I2C each that registers the drivers and sets up the regmap struct for the bus.
No it doesn't, it splits the ssm2602 driver.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de
sound/soc/blackfin/Kconfig | 3 +- sound/soc/codecs/Kconfig | 11 ++- sound/soc/codecs/Makefile | 4 ++ sound/soc/codecs/ssm2602-i2c.c | 57 +++++++++++++++ sound/soc/codecs/ssm2602-spi.c | 41 +++++++++++ sound/soc/codecs/ssm2602.c | 158 ++++++----------------------------------- sound/soc/codecs/ssm2602.h | 14 ++++
There also seem to be a bunch of arch/blackfin references to do this - they should stay OK due to the select but it might be worth updating them.
I'll apply this with the commit log edited.
participants (2)
-
Lars-Peter Clausen -
Mark Brown