[alsa-devel] hda_intel:azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
Hi, I've got some problems to start session, because i've got the message like subject:
hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.
thanks
Dear Sirus,
Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:
Hi, I've got some problems to start session, because i've got the message like subject:
hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.
your message misses a lot of useful information which would help developers (not me) to help you.
Also do you notice any problems? That means, does audio work for you?
Thanks,
Paul
[1] http://alsa-project.org/main/index.php/Help_To_Debug (Please attach that file to your next answer *and* upload it.)
I had similar issue from dmesg once. The NID,VERB,PARM works if I use hda-verb, So I think it's not a big problem since everything works.
On 2012?02?16? 17:18, Paul Menzel wrote:
Dear Sirus,
Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:
Hi, I've got some problems to start session, because i've got the message like subject:
hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.
your message misses a lot of useful information which would help developers (not me) to help you.
Also do you notice any problems? That means, does audio work for you?
Thanks,
Paul
[1] http://alsa-project.org/main/index.php/Help_To_Debug (Please attach that file to your next answer *and* upload it.)
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Thu, 16 Feb 2012 17:21:20 +0800, joey.jiaojg wrote:
I had similar issue from dmesg once. The NID,VERB,PARM works if I use hda-verb, So I think it's not a big problem since everything works.
No, no, it's a big problem. Switching to polling mode is OK. It's usually harmless. But falling back to single_cmd mode is basically a fatal error. If this happens, the unsolicited events will be never handled any longer.
Takashi
On 2012?02?16? 17:18, Paul Menzel wrote:
Dear Sirus,
Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:
Hi, I've got some problems to start session, because i've got the message like subject:
hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.
your message misses a lot of useful information which would help developers (not me) to help you.
Also do you notice any problems? That means, does audio work for you?
Thanks,
Paul
[1] http://alsa-project.org/main/index.php/Help_To_Debug (Please attach that file to your next answer *and* upload it.)
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Ooops, but I haven't faced this problem now (I happen once when I debug yesterday I think). So forget about it for the relation to another post (HP B1900). On 2012年02月16日 17:31, Takashi Iwai wrote:
At Thu, 16 Feb 2012 17:21:20 +0800, joey.jiaojg wrote:
I had similar issue from dmesg once. The NID,VERB,PARM works if I use hda-verb, So I think it's not a big problem since everything works.
No, no, it's a big problem. Switching to polling mode is OK. It's usually harmless. But falling back to single_cmd mode is basically a fatal error. If this happens, the unsolicited events will be never handled any longer.
Takashi
On 2012?02?16? 17:18, Paul Menzel wrote:
Dear Sirus,
Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:
Hi, I've got some problems to start session, because i've got the message like subject:
hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.
your message misses a lot of useful information which would help developers (not me) to help you.
Also do you notice any problems? That means, does audio work for you?
Thanks,
Paul
[1] http://alsa-project.org/main/index.php/Help_To_Debug (Please attach that file to your next answer *and* upload it.)
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Thu, 16 Feb 2012 17:34:08 +0800, joey.jiaojg wrote:
Ooops, but I haven't faced this problem now (I happen once when I debug yesterday I think). So forget about it for the relation to another post (HP B1900).
OK. The fallback to the single_cmd happens usually when invalid access to the codec chip occurs. In most cases, the verbs sent by the static model don't match with the actual hardware. Or, the verbs are sent in the bad power-state (e.g. during PM). Or whatever strange reason.
In this particular case, the verb 0x0070503 is really wrong (i.e. NID=0).
Takashi
On 2012年02月16日 17:31, Takashi Iwai wrote:
At Thu, 16 Feb 2012 17:21:20 +0800, joey.jiaojg wrote:
I had similar issue from dmesg once. The NID,VERB,PARM works if I use hda-verb, So I think it's not a big problem since everything works.
No, no, it's a big problem. Switching to polling mode is OK. It's usually harmless. But falling back to single_cmd mode is basically a fatal error. If this happens, the unsolicited events will be never handled any longer.
Takashi
On 2012?02?16? 17:18, Paul Menzel wrote:
Dear Sirus,
Am Donnerstag, den 16.02.2012, 04:29 +0000 schrieb Sirus Jolt:
Hi, I've got some problems to start session, because i've got the message like subject:
hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
I have no idea about the problem, I need your help. In some threat mention it but don't have the answer.
your message misses a lot of useful information which would help developers (not me) to help you.
Also do you notice any problems? That means, does audio work for you?
Thanks,
Paul
[1] http://alsa-project.org/main/index.php/Help_To_Debug (Please attach that file to your next answer *and* upload it.)
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
participants (4)
-
joey.jiaojg
-
Paul Menzel
-
Sirus Jolt
-
Takashi Iwai